• There are no items in your cart

ASTM E 3189 : 2019

Current

Current

The latest, up-to-date edition.

Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Static Headspace Concentration onto an Adsorbent Tube

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-26-2019

This practice describes the procedure for separation of ignitable liquid residues from fire debris samples using static headspace concentration onto an adsorbent tube, for subsequent solvent elution or thermal desorption.

1.1This practice describes the procedure for separation of ignitable liquid residues from fire debris samples using static headspace concentration onto an adsorbent tube, for subsequent solvent elution or thermal desorption.

1.2Static headspace concentration onto an adsorbent tube involves removal of a headspace extract from a sample container (typically a jar, can, or bag), through a small hole punctured in the container, using a syringe or pump.

1.3Static headspace concentration systems for adsorption onto an adsorbent tube are illustrated and described.

1.4This practice is suitable for preparing extracts from fire debris samples containing a range of volumes (µL to mL) of ignitable liquid residues, with sufficient recovery for subsequent qualitative analysis (1).2

1.5Alternative headspace concentration methods are listed in Section 2 (see Practices E1388, E1412, E1413, and E2154).

1.6The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.7This standard cannot replace knowledge, skills, or abilities acquired through education, training, and experience (Practice E2917) and is to be used in conjunction with professional judgment by individuals with such discipline-specific knowledge, skills, and abilities.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 30
DocumentType
Standard Practice
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current

ASTM E 1413 : 2019 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
ASTM E 3197 : 2020 Standard Terminology Relating to Examination of Fire Debris
ASTM E 2451 : 2021 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
ASTM E 1732 : 2022 Standard Terminology Relating to Forensic Science

ASTM E 2154 : 2015 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
ASTM E 2451 : 2008 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
ASTM E 2154 : 2001 : R2008 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
ASTM E 1618 : 1997 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E 1412 : 2016 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM E 1412 : 2012 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM E 1732 : 1996 : REV A Standard Terminology Relating to Forensic Science
ASTM E 1732 : 2012 Standard Terminology Relating to Forensic Science
ASTM E 1732 : 2024 Standard Terminology Relating to Forensic Science
ASTM E 1732 : 2009 Standard Terminology Relating to Forensic Science
ASTM E 2917 : 2024 : REV A Standard Practice for Forensic Science Practitioner Training, Continuing Education, and Professional Development Programs
ASTM E 1732 : 2018 : REV A Standard Terminology Relating to Forensic Science
ASTM E 2451 : 2013 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
ASTM E 1618 : 2001 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E 1732 : 2017 Standard Terminology Relating to Forensic Science
ASTM E 2154 : 2015 : REV A Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME) (Withdrawn 2024)
ASTM E 1459 : 2013 Standard Guide for Physical Evidence Labeling and Related Documentation
ASTM E 1492 : 2011 : R2017 Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
ASTM E 1732 : 2022 Standard Terminology Relating to Forensic Science
ASTM E 1732 : 2019 Standard Terminology Relating to Forensic Science
ASTM E 1412 : 2019 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Activated Charcoal
ASTM E 1732 : 2018 Standard Terminology Relating to Forensic Science
ASTM E 1732 : 2018 : REV B Standard Terminology Relating to Forensic Science
ASTM E 1412 : 2000 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM E 1412 : 2007 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM E 2917 : 2024 Standard Practice for Forensic Science Practitioner Training, Continuing Education, and Professional Development Programs
ASTM E 2917 : 2019 : REV A Standard Practice for Forensic Science Practitioner Training, Continuing Education, and Professional Development Programs
ASTM E 1492 : 2011 Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
ASTM E 1618 : 2006 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E 1388 : 2017 Standard Practice for Static Headspace Sampling of Vapors from Fire Debris Samples
ASTM E 1413 : 2019 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
ASTM E 1492 : 1992 : R1999 Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
ASTM E 1618 : 2006 : EDT 1 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E 2917 : 2019 Standard Practice for Forensic Science Practitioner Training, Continuing Education, and Professional Development Programs
ASTM E 1388 : 2024 Standard Practice for Static Headspace Sampling of Vapors from Fire Debris Samples
ASTM E 1412 : 2000 : R2005 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM E 2917 : 2024 : REV A Standard Practice for Forensic Science Practitioner Training, Continuing Education, and Professional Development Programs
ASTM E 1459 : 1992 : R1998 Standard Guide for Physical Evidence Labeling and Related Documentation
ASTM E 1618 : 2011 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E 1388 : 2000 : R2005 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
ASTM E 1388 : 2000 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
ASTM E 1618 : 2019 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E 1732 : 2011 : REV A Standard Terminology Relating to Forensic Science
ASTM E 1413 : 2000 : R2005 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E 2917 : 2024 : REV A Standard Practice for Forensic Science Practitioner Training, Continuing Education, and Professional Development Programs
ASTM E 1459 : 2013 : R2018 Standard Guide for Physical Evidence Labeling and Related Documentation
ASTM E 1413 : 2007 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E 1413 : 2000 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E 1412 : 1995 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM E 1732 : 2011 Standard Terminology Relating to Forensic Science
ASTM E 1618 : 2014 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E 1388 : 2005 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
ASTM E 1459 : 1992 : R2005 Standard Guide for Physical Evidence Labeling and Related Documentation
ASTM E 2451 : 2021 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
ASTM E 1388 : 1995 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
ASTM E 1618 : 2010 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E 1732 : 2011 : REV B Standard Terminology Relating to Forensic Science
ASTM E 1492 : 2005 Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
ASTM E 1413 : 2013 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E 1388 : 2012 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
ASTM E 1413 : 2006 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E 1732 : 2019 : EDT 1 Standard Terminology Relating to Forensic Science
ASTM E 2154 : 2001 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.