ASTM E 350 : 2012-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON
Published date
09-01-2012
Superseded date
07-02-2020
Superseded by
Sorry this product is not available in your region.
CONTAINED IN VOL. 03.05, 2018 Specifies the chemical analysis of carbon steels, low-alloy steels, silicon electrical steels, ingot iron, and wrought iron having chemical compositions.
| Committee |
E 01
|
| DevelopmentNote |
Supersedes ASTM E 38 (12/2001)
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS7713C | Iron, Electrical, Bar and Strip Cold Finished, Annealed |
| MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) (S/S BY SAE-AMS-S-6758) |
| MIL-S-62470 Base Document:1983 | STEEL, CHROME NICKEL MOLYBDENUM, 8620, BARS, FORGING, AND TUBING, BEARING QUALITY, VACUUM DEGASSED (S/S BY SAE-AMS6274 AND SAE-AMS6276) |
| SAE AMS6450K | Steel, Spring Wire 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) Annealed and Cold Drawn |
| SAE AMS5022N | Steel, Bars, Forgings, and Tubing, Free-Cutting 0.14 - 0.20C (SAE 1117) |
| SAE AMS6260S | Steel, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.07 - 0.13C) (9310) |
| SAE AMS6263M | Steel Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (9315) |
| SAE AMS6356H | Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.30 - 0.35C) (4132) |
| SAE AMS6350N | Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS5070J | Steel, Bars and Forgings 0.18 - 0.23C (SAE 1022) |
| SAE AMS5112M | Carbon Steel, Wire Spring Quality Music Wire 0.70 - 1.00C Cold Drawn |
| SAE AMS5115J | Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered |
| ASTM A 518/A518M : 1999 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| SAE AMS6370P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS5032G | Wire, Steel 0.18 - 0.23C (SAE 1020) Annealed |
| SAE AMS5044J | Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper |
| SAE AMS6330J | Steel Bars, Forgings, and Tubing 0.65Cr - 1.25Ni (0.33 – 0.38C) |
| SAE AMS6351K | Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized |
| SAE MAM6304B | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95cr 0.55mo 0.30v (0.40-0.50c) |
| SAE AMS5034B | Steel, Welding Wire 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS6328N | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.48 to 0.53C) (8750) |
| SAE AMS6461L | Steel, Welding Wire 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS6434H | Steel, Sheet, Strip, and Plate 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) |
| SAE AMS6433G | Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) |
| SAE AMS6274R | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) |
| ASTM A 532/A532M : 2010 | Standard Specification for Abrasion-Resistant Cast Irons |
| ASTM D 3724 : 2001 : R2007 | Standard Specification for Synthetic Brown Iron Oxide Pigment |
| SAE AMS6257F | Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Normalized and Tempered |
| SAE AMS5122K | Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper |
| MIL-A-46099 Revision C:1987 | ARMOR PLATE, STEEL, ROLL-BONDED, DUAL HARDNESS (0.187 INCHES TO 0.700 INCHES INCLUSIVE) |
| SAE AMS5075F | Steel Tubing, Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved |
| SAE AMS6361F | Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength |
| MIL-S-8844 Revision D:1987 | STEEL BAR, REFORGING STOCK, AND MECHANICAL TUBING, LOW ALLOY, PREMIUM QUALITY (S/S BY SAE-AMS6414 AND SAE-AMS6257) |
| SAE AMS6282J | Steel Tubing, Mechanical 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) |
| SAE AMS5010L | Steel Bars Free-Machining Cold Drawn (SAE 1212 or SAE 1215) |
| SAE AMS5024H | Steel, Bars, Forgings, and Tubing, Free-Cutting 1.5Mn (0.32 - 0.39C) (SAE 1137) |
| ASTM E 701 : 1980 : R1999 | Standard Test Methods for Municipal Ferrous Scrap |
| SAE AMS6528D | Steel, Bars 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized |
| SAE AMS6443G | Steel Bars, Forgings, and Tubing, 1.0Cr (0.98 - 1.10C) (SAE 51100), Consumable Electrode Vacuum Melted |
| ASTM B 599 : 1992 : R2009 : EDT 1 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| SAE AMS5035C | Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) |
| ASTM E 2093 : 2012 | Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization |
| SAE AMS6472F | Steel, Bars and Forgings, Nitriding 1.6Cr - 0.35Mo - 1.1Al (0.38 - 0.43C) (135 Mod) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength |
| ASTM C 983 : 1991 | Test Methods for Chemical and Instrumental Analysis of Metallic Core Components in Liquid Metal Fast-Breeder Reactors (LMFBR) (Withdrawn 1996) |
| ASTM A 713 : 2004 : R2017 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| ASTM B 599 : 1992 : R2014 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM B 599 : 1992 : R2003 : EDT 1 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM E 1282 : 2011 : R2016 | Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AMS5029D | Steel, Welding Wire 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Vacuum Melted, Environment Controlled Packaging |
| ASTM E 1724 : 1995 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
| ASTM E 352 : 2013-05 | TEST METHODS FOR CHEMICAL ANALYSIS OF TOOL STEELS AND OTHER SIMILAR MEDIUM-AND HIGH-ALLOY STEELS |
| SAE AMS6267J | Steel Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (9310) Electroslag Remelted or Consumable Electrode Vacuum Remelted |
| SAE AMS6280M | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.20Mo (0.28 – 0.33C) (SAE 8630) |
| SAE AMS6412N | Steel, Bars and Forgings 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) |
| SAE AMS6378G | Steel Bars 1.0Cr - 0.20Mo - 0.45Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield Strength Free Machining |
| SAE AMS6396F | Steel Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed |
| ASTM D 3724 : 2001 : R2012 | Standard Specification for Synthetic Brown Iron Oxide Pigment |
| SAE AMS6413M | Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) |
| ASTM E 1077 : 2014 : REDLINE | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM A 861 : 2004 : R2008 | Standard Specification for High-Silicon Iron Pipe and Fittings |
| SAE AMS6459E | Steel, Welding Wire 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C) Vacuum Melted |
| BS ISO 20378 : 2017 | WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON-ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION |
| SAE AMS6455L | Steel, Sheet, Strip, and Plate 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) |
| SAE AMS5085J | Steel Sheet, Strip, and Plate 0.48 - 0.55C (SAE 1050) |
| ASTM G 81 : 1997 : REV A : R2013 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| SAE AMS6427M | Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) |
| SAE AMS5121K | Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed |
| SAE AMS6407K | Steel, Bars, Forgings, and Tubing 1.2Cr - 2.0Ni - 0.45Mo (0.27 – 0.33C) |
| ASTM F 3042 : 2013 | Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws |
| SAE AMS6468E | Steel, Welding Wire 1.0Cr - 10Ni - 3.8Co - 0.45Mo - 0.08V (0.14 – 0.17C) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS6447H | Steel, Bars, Forgings, and Tubing 1.4Cr (0.93-1.05C) (SAE 52100) Electroslag Remelted |
| SAE AMS6431P | Steel, Bars, Forgings, and Tubing 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) (D6AC) Vacuum Consumable Electrode Remelted |
| SAE AMS6432C | Steel Bars, Forgings, and Tubing, 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.43 - 0.49C) |
| SAE AMS6300G | Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037) |
| SAE AMS5110K | Carbon Steel, Wire and Springs 0.75 - 0.88C (SAE 1080) Spring Temper, Cold Drawn |
| SAE AMS5050K | Steel Tubing, Seamless 0.15 Carbon, Maximum Annealed |
| SAE AMS6359K | Steel, Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) |
| SAE AMS5045J | Steel, Sheet and Strip 0.25 Carbon, Maximum Hard Temper |
| SAE AMS6494B | Steel Bars, Forgings, and Tubing 1.0Cr – 2.50Ni – 2.0Mo – 1.10Si (0.10 – 0.20C) Aircraft-Quality |
| ASTM B 599 : 1992 : R1997 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| SAE AMS6417H | Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted |
| ASTM A 518/A518M : 1999 : R2003 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| ASTM E 701 : 1980 : R2018 | Standard Test Methods for Municipal Ferrous Scrap |
| ASTM E 30 : 1989 | Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron (Withdrawn 1995) |
| ASTM A 713 : 2004 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| SAE AMS6264L | Steel, Carburizing Grade, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.14 - 0.20C) (9317) |
| SAE AMS6340B | Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 – 0.33C) (4330 Mod) Consumable Electrode Vacuum Remelted |
| SAE AMS6524E | Steel, Sheet, Strip, and Plate 1.0cr 7.5ni 4.5co 1.0mo 0.09v (0.29-0.34c) Consumable Electrode Melted, Annealed |
| ASTM A 518/A518M : 1999 : R2012 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| ASTM E 415 : 2017 : REDLINE | Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| ASTM A 518/A518M : 1999 : R2008 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| SAE AMS5047G | Steel, Sheet and Strip 0.08 - 0.13C, Aluminum Killed (SAE 1010) Deep Forming Grade |
| SAE AMS6444M | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 – 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted |
| SAE AMSS6758B | Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality) |
| SAE AMS6451D | Steel, Spring Wire 1.4Si - 0.65Cr (0.51 - 0.59C) (SAE 9254) Oil Tempered |
| SAE AMS5061H | Steel, Low Carbon Bars, and Wire 0.08 - 0.20 |
| ASTM E 31 : 1985 : R1989 | Methods for Chemical Analysis of Ferroalloys (Withdrawn 1995) |
| BS EN 62321-5:2014 | Determination of certain substances in electrotechnical products Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| ASTM E 1724 : 1995 : R2001 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010) |
| SAE AMS6278E | Steel, Bars, Forgings, and Tubing 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted |
| SAE AMS6327L | Steel Bars and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS6497A | Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Electroslag Remelted or Consumable Electrode Vacuum Remelted Premium Aircraft-Quality for Bearing Applications |
| SAE MAM6415C | Steel, Bars, Forgings, and Tubing, 0.80cr 1.8ni 0.25mo (0.38 0.43) |
| SAE AMS6409E | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Special Aircraft Quality Cleanliness Normalized and Tempered |
| SAE AMS6304M | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) |
| SAE AMS5040N | Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade |
| SAE AMS6320P | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.33 – 0.38C) (8735) |
| SAE AMS5060K | Steel, Bars, Forgings, and Tubing 0.13 - 0.18C (SAE 1015) |
| AGMA 2004 : C | GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL |
| MIL-P-70997 Base Document:1991 | Projectile, 81MM, HE, M821E1/M889E1 Body Assembly (See Notice 2 for Replacement Information) |
| MIL U 46045 : D | URANIUM ALLOY, WROUGHT, BARS, BILLETS, AND TUBULAR SHAPES |
| SAE AMS6323M | Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) |
| SAE AMS5082G | Steel Tubing, Seamless 0.31 - 0.38C (SAE 1035) Stress Relieved |
| SAE AMS6477C | Steel, Bars, Forgings, and Tubing 0.80Cr (0.90 – 1.03C) For Bearing Applications |
| SAE AMS5030K | Steel, Welding Wire 0.06 Carbon, Maximum |
| SAE AMS7304F | Springs, Steel 0.85 - 1.05C Hardened and Tempered After Forming |
| SAE AMS5046E | Carbon Steel, Sheet, Strip, and Plate (SAE 1020 and 1025) |
| SAE AMS6358K | Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) |
| SAE AMS6375D | Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS6453D | Steel, Welding Wire 0.30Cr - 1.8Ni - 0.40Mo - (0.23-0.28C) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS6509A | Steel Bars and Forgings 3.5Cr – 7.5Ni – 16.3Co – 1.75Mo – 0.2W – (0.09 - 0.13C) Double Vacuum Melted, Normalized, Annealed |
| SAE AMS6385K | Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C) |
| SAE AMS6386D | Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield Strength |
| SAE AMS6292J | Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.15 - 0.20C) (SAE 4617) |
| ASTM E 1473 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| SAE AMS5069G | Steel Bars, Forgings, and Tubing 0.15 - 0.20C (SAE 1018) |
| SAE AMS6324J | Steel Bars, Forgings, and Tubing 0.65Cr - 0.70Ni - 0.25Mo (0.38 – 0.43C) (8740 Modified) |
| SAE AMS6415U | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) |
| SAE AMS5036H | Steel Sheet and Strip, Aluminum Coated Low Carbon |
| SAE AMS6490H | Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted |
| SAE AMS6381J | Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) |
| SAE AMS6414M | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted |
| SAE AMS5120M | Steel Strip 0.68 - 0.80C (SAE 1074) |
| SAE AMS6529D | Steel, Bars 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Special Aircraft-Quality Cleanliness Normalized |
| SAE AMS6270Q | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.13 - 0.18C) (SAE 8615) |
| SAE AMS6452E | Steel, Welding Wire 0.95Cr - 0.20Mo (0.38 - 0.43C) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS6277H | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted |
| SAE AMS6365K | Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.33 – 0.38C) (SAE 4135) Normalized or Stress Relieved |
| ASTM G 81 : 1997 : REV A : R2002 : EDT 1 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| SAE AMS6281J | Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630) |
| SAE AMS6479D | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93-1.05C) (SAE 52100) Special Aircraft-Quality Cleanliness |
| SAE AMS6255F | Steel Bars, Forgings, and Tubing 1.1Si - 1.45Cr - 1.0Mo - 0.08Al (0.16 - 0.22C) Double Vacuum Melted |
| ASTM G 81 : 1997 : REV A | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ISO 20378:2017 | Welding consumables — Rods for gas welding of non-alloy and creep-resisting steels — Classification |
| SAE AMS6439E | Steel Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC) Consumable Electrode Vacuum Melted, Annealed |
| ASTM A 861 : 2004 : R2013 | Standard Specification for High-Silicon Iron Pipe and Fittings |
| SAE AMS6276L | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Consumable Electrode Vacuum Remelted |
| SAE AMS6429H | Steel Bars, Forgings, Tubing, and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Consumable Electrode Vacuum Melted |
| SAE AMS6374D | Steel Tubing, Seam-Free, Round 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95.0 ksi (655 MPa) Tensile Strength |
| AGMA 923 : B | METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
| SAE AMS5027F | Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 – 0.32C) Vacuum Melted, Environment-Controlled Packaging |
| SAE AMS6482A | Steel Bars, Forgings, and Tubing 1.5Si - 1.25Cr - 3.8Ni - 0.50Mo - 0.30V (0.40C) Vacuum Remelted Annealed |
| SAE AMS6294J | Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.17 - 0.22C) (SAE 4620) |
| SAE AMS6499A | Steel, Bars, Forgings, and Tubing 2.7Si - 0.85Cr - 1.8Ni - 0.4Mo - 0.2V - (0.37 - 0.44C) Double Vacuum Melted |
| SAE AMS6493A | Steel Bars, Forgings, and Tubing 1.0Cr - 3.25Ni - 0.40Mo (0.17 - 0.22C) Electroslag Remelted or Consumable Electrode Vacuum Remelted Premium Aircraft-Quality |
| SAE AMS5028E | Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) (D6AC) Vacuum Melted, Environment-Controlled Packaging |
| SAE AMS6421G | Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37) |
| MIL-S-8503 Revision B:1978 | STEEL BARS, CHROME-VANADIUM (6150) (AIRCRAFT QUALITY) (ASG) (S/S BY SAE-AMS6448) |
| SAE AMS6496A | Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Aircraft-Quality for Bearing Applications |
| SAE AMS6484E | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Normalized and Tempered |
| SAE AMS6372N | Steel, Mechanical Tubing 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135) |
| SAE AMS6460G | Wire, Steel Welding 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) |
| SAE AMS6382P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed |
| SAE AMS5062J | Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum |
| SAE AMS6492A | Steel Bars, Forgings, and Tubing 1.0Cr - 3.25Ni - 0.40Mo (0.17 - 0.22C) Aircraft Quality |
| ASTM E 701 : 1980 : R2005 | Standard Test Methods for Municipal Ferrous Scrap |
| SAE AMS6317K | Steel Bars and Forgings 1.8Ni - 0.25Mo (0.38 – 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5328E | Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.28 - 0.36C) (SAE 4330 Modified) Annealed |
| ASTM E 701 : 1980 : R2010 | Standard Test Methods for Municipal Ferrous Scrap |
| SAE AMS6438G | Steel, Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.45 - 0.50C) Consumable Electrode Vacuum Melted |
| SAE AMS6362G | Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength |
| SAE AMS6312J | Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) |
| SAE AMS6272M | Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617) |
| SAE AMS6423H | Steel Bars, Forgings, and Tubing 0.92Cr – 0.75Ni – 0.52Mo – 0.003B – 0.04V (Modified 98BV40) |
| SAE AMS6517A | Steel, Bars, and Forgings 3.5Cr - 9.5Ni - 18Co - 1.1Mo (0.13 – 0.17C) Double Vacuum Melted, Normalized, Annealed |
| SAE AMS5334H | Steel, Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered |
| SAE AMS6325K | Steel, Bars, and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 105 ksi (724 MPa) Tensile Strength |
| SAE AMS6426F | Steel Bars, Forgings, and Tubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C) Consumable Electrode Vacuum Melted |
| SAE AS7225A | Rivets, Carbon Steel Procurement Specification for |
| SAE AMS6419H | Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C) Consumable Electrode Vacuum Remelted |
| SAE AMS6470N | Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod) |
| SAE AMS6469E | Steel, Welding Wire 1.75Mn - 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) Vacuum Melted, Environment-Controlled Packaging |
| ASTM A 691 : 1998 : R2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| SAE AMS6250M | Steel Bars, Forgings, and Tubing 1.5Cr - 3.5Ni (0.07 - 0.13 C) (3310) |
| SAE AMS6437J | Steel, Sheet, Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) |
| SAE AMS6373H | Steel, Welded Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS5330E | Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340 Modified) Annealed |
| SAE AMS6305G | Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted |
| SAE AMS6424G | Steel Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 – 0.55C) |
| ASTM A 691 : 1998 : R2007 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| SAE AMS6435G | Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Vacuum Consumable Electrode Melted, Annealed |
| ASTM E 2093 : 2012 : R2016 | Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization (Withdrawn 2025) |
| ASTM A 583 : 1993 : R1999 | Standard Specification for Cast Steel Wheels for Railway Service (Withdrawn 2004) |
| SAE AMS6481D | Steel Bars, Forgings, and Tubing, Nitriding 3Cr - 1Mo - 0.2V - (0.29 - 0.36C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted |
| ASTM E 38 : 1985 | Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989) |
| SAE AS7240A | Washers, Spring Lock, Carbon Steel, Procurement Specification for |
| ASTM E 322 : 2012 : REDLINE | Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM A 532/A532M : 2010 : R2014 | Standard Specification for Abrasion-Resistant Cast Irons |
| SAE AMS6299F | Steel Bars, Forgings, and Tubing, Carburizing 0.50Cr - 1.8Ni - 0.25Mo (0.17 - 0.23C) (SAE 4320H) |
| SAE AMS6462K | Steel, Welding Wire 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) |
| SAE AMS6430J | Steel, Bars, Forgings, Tubing, and Rings 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 – 0.38C) (4335 Modified) |
| SAE AMS6498A | Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Double Vacuum Melted Premium Aircraft-Quality for Bearing Applications |
| SAE AMS6342K | Steel Bars, Forgings, and Tubing 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840) |
| MIL-S-8690 Revision B:1978 | STEEL, CHROME-NICKEL-MOLYBDENUM, 8620, BARS, AIRCRAFT QUALITY (S/S BY SAE-AMS6274) |
| SAE AMS5080K | Steel, Bars, Forgings, and Tubing 0.31 - 0.38C (SAE 1035) |
| SAE AMS5042N | Steel, Sheet and Strip 0.15 Carbon, Maximum Forming Grade |
| SAE AMS7817B | Molybdenum Alloy Sheet, Strip, and Plate, 0.48ti 0.090zr 0.02c, Arc Cast, Stress Relieved |
| SAE AMS6473B | Steel Welding Wire 0.88Cr - 1.8Ni - 1.6Co - 0.42Mo - 0.08V (0.28 - 0.33C) (SAE 4330V) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS6425D | Steel, Bars, Forgings, and Tubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Consumable Electrode Vacuum Melted |
| ASTM A 713 : 2004 : R2010 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| SAE AMS6395H | Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.38 - 0.43C) (SAE 4140) |
| NFL 06 835 : 2007 | AEROSPACE SERIES - METALLIC PARTS - INDUCEMENT COMPRESSIVE SURFACE STRESSES - STEEL SHOT CUT WIRE (SPHERICAL) |
| ASTM G 81 : 1997 : REV A : R2007 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM D 3724 : 2001 | Standard Specification for Synthetic Brown Iron Oxide Pigment |
| MIL-DTL-15119 Revision B:2012 | Tubing, Round, Seamless Alloy Steel |
| 16/30323181 DC : 0 | BS ISO 20378 - WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION |
| ASTM A 518M : 1992 | SPECIFICATION FOR CORROSION-RESISTANT HIGH-SILICON IRON CASTINGS (METRIC) |
| ASTM A 518/A518M : 1999 : R2018 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| SAE AMS6491E | Steel Bars, Forgings, and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted |
| SAE AMS6495B | Steel Bars, Forgings, and Tubing 1.0Cr – 2.50Ni – 2.0Mo – 1.10Si (0.10 – 0.20C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted |
| SAE AMS6357L | Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (8735) |
| SAE AMS6322P | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) |
| SAE AMS6265P | Steel, Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (9310) Vacuum Consumable Electrode Remelted |
| SAE AMS6349E | Steel Bars 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized |
| SAE AMS7301J | Steel, Highly-Stressed Springs 0.95Cr - 0.20V (0.48 - 0.53C) (SAE 6150) Case Hardened |
| SAE AMS6487L | Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted |
| SAE AMS5031G | Welding Electrodes, Covered, Steel 0.07 - 0.15C |
| SAE AMS6442G | Steel Bars and Forgings 0.50cr (0.98-1.10c) (SAE 50100) for Bearing Applications |
| SAE AMS6428K | Steel, Bars, Forgings, and Tubing 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 Mod) |
| SAE AMS5132L | Steel, Bars 0.90 - 1.03C |
| SAE AMS6440S | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) For Bearing Applications |
| SAE AMS7819D | Molybdenum Alloy Bars 0.48Ti - 0.09Zr - 0.02C Arc Cast, Stress Relieved |
| SAE AMS6523H | Steel, Sheet, Strip, and Plate 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum Consumable Electrode Melted, Annealed |
| CSA A3000 : 2013 | CEMENTITIOUS MATERIALS COMPENDIUM |
| I.S. EN 62321-5:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 5: CADMIUM, LEAD AND CHROMIUM IN POLYMERS AND ELECTRONICS AND CADMIUM AND LEAD IN METALS BY AAS, AFS, ICP-OES AND ICP-MS |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| SAE AMS6371L | Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS6471H | Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod) Consumable Electrode Vacuum Melted |
| SAE AMS6458J | Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS6345D | Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated |
| ASTM A 861 :2004 | Standard Specification for High-Silicon Iron Pipe and Fittings |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ASTM A 691 : 1998 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| SAE AMS6422K | Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40) |
| ASTM E 1282 : 2011 | Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials |
| ASTM A 861 : 2004 : R2017 | Standard Specification for High-Silicon Iron Pipe and Fittings |
| EN 62321-5:2014 | Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| ASME Y14.46 : 2017 | PRODUCT DEFINITION FOR ADDITIVE MANUFACTURING |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 1601 : 2012 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ISO 5725:1986 | Precision of test methods — Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ASTM E 173 : 1993 | Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997) |
| ASTM E 352 : 2013-05 | TEST METHODS FOR CHEMICAL ANALYSIS OF TOOL STEELS AND OTHER SIMILAR MEDIUM-AND HIGH-ALLOY STEELS |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.