BS EN 45510-6-5:2000
Current
The latest, up-to-date edition.
Guide for the procurement of power station equipment. Turbine auxiliaries Dry cooling systems - Section 5: Dry cooling systems
Hardcopy , PDF
English
01-15-2000
Foreword
1 Scope
2 Normative references
3 Definitions
3.1 Organizational terms
3.2 Technical terms
3.3 General terms
4 Brief overall project description
4.1 Role and organization of purchaser
4.2 Site location
4.3 Equipment task
4.4 Equipment to be purchased
4.5 Control and instrumentation
4.6 Electrical supplies and other services
4.7 Other interfaces
4.8 Project programme
4.9 Equipment identification systems
5 Extent of supply
6 Terminal points
7 Operational requirements
7.1 Operating environment
7.2 Manning levels
7.3 Normal operation
7.4 Operating hoursnts
7.5 Start-up and shut-down
7.6 Abnormal conditions
7.7 Further operational requirements
8 Life expectancy
8.1 Design life
8.2 Components requiring periodic maintenance
9 Performance
9.1 Duty 13
9.2 Performance
9.3 Equipment margins
9.4 Availability
9.5 Levels of component redundancy
9.6 Further performance requirements
10 Design and fabrication
10.1 Specific equipment features
10.2 Design justification
10.3 Material selection
10.4 Safety
10.5 Interchangeability
10.6 Fabrication methods
11 Maintenance requirements
11.1 Planned maintenance
11.2 Personnel safety
11.3 Requirements for access
11.4 Lifting requirements
11.5 Special tools
11.6 Test equipment
11.7 Spare parts strategy
11.8 Special precautions
12 Technical documentation requirements
12.1 Tender documentation
12.2 Contract documentation
13 Applicable legislation, regulations, standards and
further requirements
13.1 Legislation and regulations
13.2 Standards
13.3 Further requirements
14 Evaluation criteria
14.1 General
14.2 Technical criteria
15 Quality measures
15.1 General
15.2 Approvals procedure
15.3 Inspection requirements
15.4 Non-conformity
16 Site factors
16.1 Access
16.2 Facilities
16.3 Site specific requirements
17 Verification of specified performance
17.1 General
17.2 Works tests
17.3 Test during installation and commissioning
17.4 Technical conditions for trial run
17.5 Functional and performance tests
Bibliography
Gives advice on writing a technical specification for procurement of natural and mechanical draught dry cooling towers, aircooled condensers and their internals, for electricity power stations, but not for use in nuclear power stations. Applies to water distribution system; supporting frame and footbridges; heat exchangers; winter operating equipment (ie louvres, shutters); noise attenuation apparatus; fan and fan ancillaries; pipework and valves; exhaust steam duct; air extraction system; distribution ducts; and condensate system. Not applicable to water-cooled condensers; chemical and mechanical water treatment; civil work and cooling water pumps and auxiliaries.
Committee |
PEL/99
|
DevelopmentNote |
Supersedes 94/715268 DC. (09/2005)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN 45510-6-5 : 1999 | Identical |
I.S. EN 45510-6-5:2000 | Identical |
UNE-EN 45510-6-5:2000 | Identical |
NS EN 45510-6-5 : 1ED 2000 | Identical |
EN 45510-6-5 : 1999 | Identical |
NEN EN 45510-6-5 : 1999 | Identical |
EN 45510-6-5:1999 | Identical |
DIN EN 45510-6-5:2000-02 | Identical |
ISO 1996-2:2017 | Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels |
ISO 3354:2008 | Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions |
EN 45510-8-1:1998 | Guide for procurement of power station equipment - Part 8-1: Control and instrumentation |
ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
EN 45510-8-1:1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION |
IEC 60050-801:1994 | International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics |
ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
ISO 1996-3:1987 | Acoustics Description and measurement of environmental noise Part 3: Application to noise limits |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 1996-1:2016 | Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures |
ISO 9001:2015 | Quality management systems — Requirements |
EN ISO 8402 : 1995 | QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY |
ISO 1460:1992 | Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 22063 : 1993 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.