DEFSTAN 80-15/2(1990) : 1990
Withdrawn
Withdrawn
PAINT, PRE-TREATMENT PRIMER (ETCHING PRIMER) - TYPES: BRUSHING (BASE AND ACID COMPONENT), SPRAYING (BASE AND ACID COMPONENT)
Available format(s)
PDF
Language(s)
English
Published date
01-01-1990
Publisher
Withdrawn date
09-19-2016
US$20.00
Excluding Tax where applicable
Preface
Section One - General
1 Scope
2 WARNING
3 Related Documents
4 Description
5 Information to be Supplied by the Purchaser
6 Supply
7 Keeping Qualities
8 Quality Assurance
9 Containers and Marking of Containers
Section Two - Material
10 Composition
11 Testing
Annex A - Preparation of Test Panels
Annex B - Pot Life
Gives the requirements for a paint suitable for air-drying or stoving for use as a pre-treatment or etching primer on metal surfaces.
| DevelopmentNote |
Supersedes DEFSTAN 80-15/1(1970) & DEF 1408. (10/2003) This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (07/2009)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Withdrawn
|
| Supersedes |
| DEFSTAN 80-60/2(1992) : 1992 | PAINT, SYSTEM, SPRAYING, HAMMER FINISH, EPOXIDE, STOVING PAINT, FILLER, SPRAYING, EPOXIDE, STOVING, TWO-PACK PAINT, FINISHING, SPRAYING, HAMMER FINISH, EPOXIDE, STOVING |
| DEFSTAN 80-42/2(1991) : 1991 | PAINT, SYSTEM, DEFENCE EQUIPMENT, IRR MATT, STOVING, PAINT, UNDERCOAT, DEFENCE EQUIPMENT, STOVING, PAINT, FINISHING, DEFENCE EQUIPMENT, IRR MATT, STOVING, TYPES: DIPPING, SPRAYING |
| NES 113 PT 5 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - ROLLER CONVEYORS |
| BS 7195(1989) : 1989 | GUIDE FOR PREVENTION OF CORROSION OF METALS CAUSED BY VAPOURS FROM ORGANIC MATERIALS |
| DEFSTAN 80-25/2(1981) : 1981 AMD 3 | PAINT FINISHING AMMUNITION STOVING. PAINT PRIMING AMMUNITION STOVING SCHEME A: SYSTEM OF PRIMER AND FINISH. SCHEME B: ONE COAT FINISH. TYPES: BRUSHING, SPRAYING ELECTROSTATIC SPRAYING DIP. |
| DEFSTAN 80-27/5(2009) : 2009 | PAINT, AMMUNITION FINISHING, BRUSHING, SPRAYING AND DIPPING TYPES: SEMI-GLOSS; MATT |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 03-32(PT3)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| DEFSTAN 80-60/3(1998) : 1998 | PAINT, SYSTEM, STOVING, HAMMER, FINISH, SPRAYING |
| DEFSTAN 03-32(PT1)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 80-73/2(1994) : 1994 | PAINT, ANTI-SLIP TYPE: BRUSHING |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 03-32(PT1)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 81-102/3(2000) : 2000 | THE REFURBISHMENT OF METAL AMMUNITION CONTAINERS |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 03-2/6(2011) : 2011 | CLEANING AND PREPARATION OF METAL SURFACES |
| DEFSTAN 80-27/3(1993) : 1993 | PAINT, AMMUNITION FINISHING, SEMI-GLOSS - TYPES: BRUSHING, SPRAYING, DIPPING |
| DEFSTAN 80-27/4(1998) : 1998 | PAINT, AMMUNITION FINISHING, BRUSHING, SPRAYING AND DIPPING TYPES: SEMI GLOSS MATT |
| DEFSTAN 03-32(PT5)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 03-2/4(2005) : 2005 | CLEANING AND PREPARATION OF METAL SURFACES |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 80-152/2(1999) : 1999 | PAINT, SYSTEM, EPOXIDE, STOVING - TYPES: SEMI-GLOSS - GLOSS |
| DEFSTAN 03-2/5(2009) : 2009 | CLEANING AND PREPARATION OF METAL SURFACES |
| DEFSTAN 80-25/4(1997) : 1997 | PAINT, AMMUNITION FINISHING, STOVING SPRAYING AND DIPPING TYPES: SEMI-GLOSS MATT |
| DEFSTAN 03-2/3(1995) : 1995 | CLEANING AND PREPARATION OF METAL SURFACES |
| DEFSTAN 80-77/2(1995) : 1995 | PAINT, PRIMING, FLAME RETARDANT, BRUSHING |
| DEFSTAN 02-751/1(2000) : 2000 | REQUIREMENTS FOR PRESERVATION, PREPARATION AND PAINTING OF GRP SHIPS |
| DEFSTAN 03-32(PT4)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 80-25/3(1993) : 1993 | PAINT, AMMUNITION FINISHING, SEMI-GLOSS, STOVING - TYPES: BRUSHING, SPRAYING, DIPPING |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| NES 763 : ISSUE 3 | PRESERVATION AND PAINTING OF COMPARTMENTS IN SURFACE SHIPS |
| DEFSTAN 81-102/2(1999) : 1999 | THE REFURBISHMENT OF METAL AMMUNITION CONTAINERS |
| DEFSTAN 80-40/2(1982) : 1982 AMD 1 1995 | STOPPER, METAL SURFACE, TWO-PACK |
| NES 759 : ISSUE 3 | USE OF PRE-TREATMENT PRIMER |
| DEFSTAN 80-59/3(1990) : 1990 AMD 1 1991 | PAINT SYSTEM, HARD GLOSS ENAMEL PAINT, FINISHING, HARD GLOSS ENAMEL PAINT, UNDERCOAT, FOR PAINT, FINISHING, HARD GLOSS ENAMEL - TYPES: BRUSHING & SPRAYING |
| SAE AMS03_2A | Cleaning and Preparation of Metal Surfaces |
| DEFSTAN 80-41/2(1991) : 1991 | PAINT SYSTEM, DEFENCE EQUIPMENT, IRR MATT - UNDERCOAT, DEFENCE EQUIPMENT - FINISHING, DEFENCE EQUIPMENT, IRR MATT - TYPES: BRUSHING, SPRAYING AND DIPPING |
| DEFSTAN 80-32/2(1990) : 1990 | PAINT, FINISHING, GENERAL SERVICE, GLOSS HEAT-RESISTANT TYPES: BRUSHING, SPRAYING |
| NES 737 : ISSUE 2 AMD 1 | PRESERVATION AND PAINTING OF MECHANICAL MACHINERY ITEMS |
| NES 774 : ISSUE 4 | REQUIREMENTS FOR PREPARATION AND PAINTING SUBMARINES |
| DEFSTAN 80-165/1(1993) : INTERIM | PAINT SYSTEM FOR SHIP'S WEATHERWORK, HIGH DURABILITY, LIGHT WEATHERWORK GREY - TYPE: BRUSHING |
| NES 751 : ISSUE 3 AMD 1 | PRESERVATION, PREPARATION AND PAINTING OF GRP SHIPS |
| DEFSTAN 80-50/3(1991) : 1991 | PAINT, SYSTEM, DEFENCE EQUIPMENT, GLOSS PAINT, UNDERCOAT, DEFENCE EQUIPMENT PAINT, FINISHING, DEFENCE EQUIPMENT, GLOSS - TYPES: BRUSHING, SPRAYING, DIPPING |
| NES 742 PT 3 : ISSUE 1 | PRESERVATION OF SMALL CRAFT AND BOATS - ALUMINIUM CONSTRUCTION |
| DEFSTAN 80-60/1(1977) : LATEST | PAINT SYSTEM, HAMMER FINISH STOVING PAINT HAMMER FINISH, STOVING. PAINT FILLER FOR PAINT HAMMER FINISH SHOVING TYPE: SPRAYING |
| DEFSTAN 03-30(PT5)/1(1992) : 1992 | TREATMENTS FOR THE PROTECTION OF METAL PARTS OF SERVICE STORES AND EQUIPMENT AGAINST CORROSION - PART 5: INDEX, RELATED DOCUMENTS AND SOURCES |
| DEFSTAN 21-5/1(2000) : 2000 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| DEFSTAN 02-758/1(2000) : 2000 | REQUIREMENTS FOR WEATHERWORK PREPARATION AND PAINTING OF SURFACE SHIPS |
| DEFSTAN 02-737/1(2000) : 2000 | PRESERVATION AND PAINTING OF MECHANICAL MACHINERY ITEMS |
| DEFSTAN 03-7/1(1973) : 1973 | PAINTING OF METAL AND WOOD |
| DEFSTAN 03-32(PT1)/1(1993) : 1993 | PRETREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - GENERAL REQUIREMENTS |
| NES 742 PT 2 : ISSUE 4 | PRESERVATION OF SMALL CRAFT AND BOATS - GRP CONSTRUCTION |
| NES 765 : ISSUE 2 | REQUIREMENTS FOR PAINTING OF MACHINERY COMPARTMENTS IN STEEL HULLED SURFACE SHIPS |
| DEFSTAN 80-153/1(1991) : 1991 | PAINT, SYSTEM, DEFENCE EQUIPMENT, MATT - TYPES: BRUSHING, SPRAYING, DIPPING |
| DEFSTAN 80-187/1(1993) : INTERIM | PAINT SYSTEM FOR SHIPS' WEATHERWORK - PAINT PRIMING, SHIPS' - WEATHERWORK - PAINT UNDERCOAT, SHIPS' WEATHERWORK - PAINT FINISHING, SHIPS' WEATHERWORK - TYPE: BRUSHING |
| DEFSTAN 80-152/1(1991) : 1991 | PAINT, SYSTEM, SPRAYING, EPOXIDE, STOVING - PAINT, PRIMING, SPRAYING, EPOXIDE, STOVING - PAINT, FILLER, SPRAYING, EPOXIDE, STOVING - PAINT, FINISHING, SPRAYING, EPOXIDE STOVING - SEMI-GLOSS AND GLOSS |
| DEFSTAN 03-2/2(1991) : 1991 | CLEANING AND PREPARATION OF METAL SURFACES |
| DEFSTAN 80-27/2(1981) : 1981 AMD 1 | PAINT FINISHING AMMUNITION. PAINT PRIMING AMMUNITION SCHEME A: SYSTEM OF PRIMER & FINISH. SCHEME B: ONE-COAT FINISH. TYPES: BRUSHING SPRAYING ELECTROSTATIC SPRAYING DIPPING |
| DEFSTAN 81-102/1(1997) : 1997 | THE REFURBISHMENT OF METAL AMMUNITION CONTAINERS |
| DEFSTAN 80-204/1(1997) : 1997 | PAINT SYSTEM, GROUND SERVICE EQUIPMENT, GLOSS, DEW POINT TOLERANT, TYPES: BRUSHING, SPRAYING |
| DEFSTAN 80-111/1(1985) : 1985 | PAINT FINISHING, LOW SHEEN, BLACK, BRUSHING |
| BS 1595-1:1986 | Propan-2-ol (isopropyl alcohol) for industrial use Specification for propan-2-ol (isopropyl alcohol) |
| BS 1795:1976 | Specification for extenders for paints |
Summarise
US$20.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.