DIN 16963-11:1999-10
Withdrawn
Withdrawn
PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 11: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING - DIMENSIONS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-12-2013
Withdrawn date
01-01-2011
Excluding Tax where applicable
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Masse, Bezeichnung
3.1 Allgemeines
3.2 Bundbuchsen
3.3 Flansche (Pos. Nr. 11)
3.4 Dichtringe
3.4.1 Flachdichtring (Pos. Nr. 10)
3.4.2 Runddichtring (Pos. Nr. 13)
4 Werkstoff
5 Ausführung
6 Kennzeichnung der Bundbuchsen
Anhang A (informativ) Literaturhinweise
This standard is included in DIN Handbook 52, 62-2 and 62 CD. Applies to bushes, flanges and seals for socket-welded flanged joints for connecting pipes for high density polyethylene (HDPE) Type 1 and Type 2 in accordance with DIN 8074 Part 1 or Part 2, and for connecting pipes and pipe elements of other material for pressure pipelines. The bushes and flanges of HDPE Types 1 and 2 must conform to the requirements of DIN 16963 Part 5 or Part 25.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| DIN 8075 Beiblatt 1:1984-02 | HIGH-DENSITY POLYETHYLENE (HDPE) PIPES - CHEMICAL RESISTANCE OF PIPES AND FITTINGS |
| DIN 16962-12:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYPROPYLENE (PP) FOR PIPES UNDER PRESSURE, PP-H 100, PP-B 80 AND PP-R 80 - PART 12: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING; DIMENSIONS |
| DIN HDBK 62 CD : 7ED 2004 | WASSERVERSORGUNG 2 - GUSS-, KUNSTSTOFF-, STAHLBETON- UND STAHLROHRE FUER WASSERLEITUNGEN |
| DIN 16963-15:1987-06 | PIPE JOINT ASSEMBLIES AND FITTINGS OF HIGH-DENSITY POLYETHYLENE (PE-HD) PRESSURE PIPES - THREADED PIPE JOINTS - DIMENSIONS |
| DIN 16963-13:1980-08 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF HIGH DENSITY POLYETHYLENE (HDPE) UNDER PRESSURE; TYPE 1 AND 2, TURNED AND PRESSED SOCKETS REDUCING FOR BUTT WELDING; DIMENSIONS |
| DIN 16963-10:1980-08 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF HIGH DENSITY POLYETHYLENE (HDPE); TYPE 1 AND 2, SOCKETS AND CAPS INJECTION MOULDED FOR SOCKET WELDING; DIMENSIONS |
| DIN HDBK 62-2 : 8ED 2010 | |
| DIN 16963-14:1983-06 | PIPE JOINT AND THEIR ELEMENTS FOR PIPES OF HIGH DENSITY POLYETHYLENE (HDPE) UNDER PRESSURE - TYPE 1 AND 2, SOCKET REDUCING AND UNIONS INJECTION MOULDED FOR SOCKET WELDING - DIMENSIONS |
| DIN EN 1561:2012-01 | Founding - Grey cast irons; German version EN 1561:2011 |
| DIN EN 681-1:2016-07 (Draft) | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016 |
| DIN 8063-4:1983-09 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - BRUSHINGS, FLANGES, GASKETS - DIMENSIONS |
| DIN 8063-5:1999-10 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 5: GENERAL QUALITY REQUIREMENTS, TESTING |
| DIN EN 573-3:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| DIN 7728-1:1988-01 | PLASTICS - SYMBOLS AND CODES FOR POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
| DIN 8075:2011-12 | POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING |
| DIN 28091-2:2014-11 | TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 2: REQUIREMENTS AND TESTING FOR FIBRE-BASED GASKET MATERIALS (FA) |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| PREN 1092-1 : DRAFT 2016 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN EN 60893-1:2004-12 | INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| PREN 682 : DRAFT 1998 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
| DIN 8074:2011-12 | Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English |
| ISO 4065:1996 | Thermoplastics pipes — Universal wall thickness table |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| DIN 28091-1:2014-11 | TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 1: GENERAL REQUIREMENTS FOR GASKET MATERIALS |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| EN 1561:2011 | Founding - Grey cast irons |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 60893-1:2004 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
Summarise