DIN 50014:1985-07
Withdrawn
Withdrawn
View Superseded by
CLIMATES AND THEIR TECHNICAL APPLICATION; STANDARD ATMOSPHERES
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-1985
Withdrawn date
09-01-2008
Superseded by
Excluding Tax where applicable
Kein Inhaltsverzeichnis in der Norm vorhanden.
This standard is included in DIN Handbook 175 and 219.
| DevelopmentNote |
DRAFT 2018 issued in April 2018. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| ISO 554:1976 | Identical |
| DIN 4102-1:1998-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 1: BUILDING MATERIALS; CONCEPTS, REQUIREMENTS AND TESTS |
| BWB TL 8010-0001 : 8ED 2008 | PRIMERS FOR BUNDESWEHR EQUIPMENT - SOLVENT-BASED AND WATER-THINNABLE - INDUSTRIAL USE |
| DIN 65571-2:1992-11 | AEROSPACE; REINFORCEMENT FIBRES; DETERMINATION OF FILAMENT DIAMETER OF FILAMENT YARNS; LONGITUDINAL PROJECTION METHOD |
| DIN 61855-2:1987-04 | TEXTILE GLASS - TEXTILE GLASS ROVINGS FOR THE REINFORCEMENT OF PLASTICS - CLASSIFICATION, APPLICATION |
| BWB TL 8010-0351 : 3ED 2001 | REMOVABLE PAINT, WHITE |
| DIN 50470:1980-09 | TESTING OF PERMANENT MAGNETIC MATERIALS; DETERMINATION OF THE DEMAGNETIZATION CURVE AND PERMANENT PERMEABILITY IN A YOKE; INDUCTIVE METHOD |
| DIN 65374:1989-11 | AEROSPACE; POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS AND MOULDED PARTS; TECHNICAL SPECIFICATION |
| BWB TL 8305-0165 : 3ED 1995 | SINGLE-SIDE AND TWO-SIDED COATED POLYAMIDE FABRIC, LIGHT-WEIGHT |
| DIN 65568:1992-10 | AEROSPACE; REINFORCEMENT FIBRES; DETERMINATION OF THERMAL OXIDATIVE RESISTANCE OF CARBON FILAMENT YARNS, WOVEN FABRICS AND SHORT CUTS |
| BWB TL 7930-0015 : 1ED 1979 | AIRCRAFT WAX (LIQUID) |
| DIN 68131:1994-05 | CASTORS FOR FURNITURE - CASTORS FOR SWIVELLING CHAIRS AND SWIVELLING EASY CHAIRS - REQUIREMENTS AND TESTING |
| DIN 53284:1979-09 | TESTING OF ADHESIVES FOR METALS AND ADHESIVELY BONDED METAL JOINTS; CREEP TEST ON SINGLE LAP JOINTS |
| DIN 29971:1991-09 | AEROSPACE - UNIDIRECTIONAL CARBON FIBRE-EPOXY SHEET AND TAPE PREPREG - TECHNICAL SPECIFICATION |
| DIN VDE 0291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| BWB TL 8010-0054 : 2ED 2005 | VERDUENNER FUER LACKE AUF DER BASIS VON ACRYLAT-, ALKYD-, POLYURETHAN- UND EPOXIDHARZEN, BW-BEDARF |
| DIN 65427-2:1991-09 | AEROSPACE; AROMATIC POLYAMIDE (ARAMID); FABRIC WOVEN FROM HIGH-MODULUS FILAMENT YARN; TECHNICAL SPECIFICATION |
| DIN 57291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| DIN 50103-2:1984-03 | TESTING OF METALLIC MATERIALS; ROCKWELL HARDNESS TEST; N AND T SCALES |
| DIN ISO 16000-6:2012-11 | Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA? sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011) |
| DIN 51211:1978-09 | TESTING OF METALLIC MATERIALS; REVERSE BEND TEST OF WIRES |
| DIN 16945:1989-03 | Testing of resins, hardeners and accelerators, and catalyzed resins |
| DIN 52187:1979-05 | TESTING OF WOOD; DETERMINATION OF ULTIMATE SHEARING STRESS PARALLEL TO GRAIN |
| DIN 58196-2:1996-07 | OPTICAL COATINGS - PART 2: TESTING OF THE ADHESION BY BOILING IN DEIONIZED WATER AND IN SALT WATER |
| DIN 65060:1991-07 | AEROSPACE; TEXTILE GLASS, TEXTILE GLASS FILAMENT ROVINGS FOR REINFORCEMENT OF PLASTICS; TECHNICAL SPECIFICATION |
| BWB TL 7330-0033 : 1ED 2003 | |
| DIN 58196-3:1997-03 | OPTICAL COATINGS - PART 3: TESTING OF THE RESISTANCE AGAINST OPTICAL RADIATION |
| BWB TL 8010-0048 : 2ED MAY 2006 | |
| DIN 65565:1992-10 | AEROSPACE; REINFORCEMENT FIBRES; QUALITATIVE TESTING OF SIZE TYPE OF CARBON FILAMENT YARNS, WOVEN FABRICS AND CHOPPED STRANDS BY INFRARED SPECTROSCOPY |
| DIN 55928-8:1994-07 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - PART 8: PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS FROM CORROSION |
| DIN 273-1:1981-05 | BASIC MATERIALS FOR MAGNESIA FLOOR SCREEDS - CAUSTIC MAGNESIA |
| DIN 14811-3:1977-11 | FIRE HOSES; ABRASION TEST |
| DIN 65571-3:1992-11 | AEROSPACE; REINFORCEMENT FIBRES; DETERMINATION OF FILAMENT DIAMETER, CROSS-SECTIONAL SHAPE AND AREA OF FILAMENT YARNS; MEASUREMENT OF TRANSVERSE MICRO-SECTION |
| DIN 53854:1993-06 | TESTING OF TEXTILES; DETERMINATIONS OF MASS OF TEXTILE FABRICS WITH THE EXCEPTION OF KNITTED FABRICS AND NONWOVEN |
| DIN 4000-57:1990-11 | TABULAR LAYOUTS OF ARTICLE CHARACTERISTICS FOR FILLER METALS FOR WELDING, BRAZING AND SOLDERING, FLUXES AND ADHESIVES |
| DIN 55477:1990-11 | PACKAGING; NON-REINFORCED & REINFORCED PLASTIC TAPES; REQUIREMENTS & TESTING |
| DIN 65074:1999-03 | AEROSPACE - ADHESIVE FILMS AND PRIMERS FOR STRUCTURAL ASSEMBLIES - TECHNICAL SPECIFICATION |
| DIN ISO 16000-28:2012-12 | Indoor air - Part 28: Determination of odour emissions from building products using test chambers (ISO 16000-28:2012) |
| DIN 65146-2:1991-09 | AEROSPACE; PREIMPREGNATED WOVEN FABRIC OF CARBON FILAMENT YARN AND EPOXY RESIN; TECHNICAL SPECIFICATION |
| DIN 51212:1978-09 | TESTING OF METALLIC MATERIALS; TORSION TEST OF WIRES |
| DIN 50013:1979-06 | CLIMATES AND THEIR TECHNICAL APPLICATION; PREFERRED TEMPERATURES |
| DIN 18164-1:1992-08 | RIGID CELLULAR PLASTICS INSULATING BUILDING MATERIALS - THERMAL INSULATING MATERIALS |
| DIN 53799:1986-01 | DECORATIVE LAMINATED SHEETS ON BASIS OF AMINOPLASTIC RESINS; TEST METHOD |
| DIN 3859-3:1995-12 | NON-SOLDERING COMPRESSION COUPLINGS WITH CUTTING RINGS ACCORDING TO DIN 2353 - PART 3: TEST PROCEDURE |
| DIN EN ISO 10321:2008-08 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
| DIN 73378:1996-02 | POLYAMIDE TUBING FOR MOTOR VEHICLES |
| DIN 65375:1989-11 | Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction |
| DIN 61853-1:1987-04 | TEXTILE GLASS; TEXTILE GLASS MATS FOR PLASTICS REINFORCEMENT; TECHNICAL DELIVERY CONDITIONS |
| DIN 53354:1981-02 | TESTING OF ARTIFICIAL LEATHER, TENSILE TEST |
| DIN 65469:1992-08 | AEROSPACE; FIBRE-REINFORCED PLASTICS; TENSILE TEST OF MONOLAYER FLAT TENSION SPECIMENS |
| DIN 52307:1990-03 | DART DROP TEST ON SAFETY GLASS FOR VEHICLE GLAZING |
| DIN 32742-7:1999-04 | OFFICE MACHINES FACSIMILE EQUIPMENT - PART 7: REALISATION AND APPLICATION |
| DIN 65221:1989-11 | Aerospace; sheets from rubber-cork; technical specification |
| DIN 65212:1988-11 | AEROSPACE; INSTRUMENTATION LOW PRESSURE HOSES; TECHNICAL SPECIFICATION |
| DIN 19061:1996-11 | DIGITAL OUTPUT ON FILM 35 MM IN APERTURE CARDS - REQUIREMENTS AND TESTING |
| DIN 55990-8:1980-06 | TESTING OF PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; POWDER COATINGS, ASSESSMENT OF THE CHEMICAL STORAGE STABILITY |
| DIN 53282:1979-09 | TESTING OF ADHESIVES FOR METALS AND ADHESIVELY BONDED METAL JOINTS; T-PEEL TEST |
| DIN 60850-2:1987-03 | TEXTILE GLASS; GLASS FILAMENT YARNS; TECHNICAL DELIVERY CONDITIONS |
| DIN 65380 : 1987 | AEROSPACE; FIBRE REINFORCED PLASTICS; TESTING OF UNIDIRECTIONAL LAMINATES AND WOVEN-FABRIC LAMINATES; COMPRESSION TEST |
| DIN 75521-2:1992-02 | SPEEDOMETER INSTRUMENT PANEL MOUNTING FOR MOTOR VEHICLES |
| DIN 65561:1991-05 | AEROSPACE; FIBRE REINFORCED PLASTICS; TESTING OF MULTIDIRECTIONAL LAMINATES; DETERMINATION OF COMPRESSIVE STRENGTH AFTER IMPACT TEST |
| DIN 53769-3:1988-11 | TESTING OF GLASS FIBRE REINFORCED PLASTICS PIPELINES - SHORT TERM FLATTENING TEST AND FLATTENING ENDURANCE TEST ON PIPES |
| DIN 65147-2:1987-04 | AEROSPACE; CARBON FIBRES; FABRIC OF CARBON FIBRE FILAMENT YARN; TECHNICAL SPECIFICATION |
| DIN 66211-1:1988-02 | MAGNETIC TAPE CASSETTE FOR INFORMATION PROCESSING, TAPE WIDTH 3,81 MM; MECHANICAL PROPERTIES |
| DIN 73411:1979-07 | HOSES FOR COOLING PIPES IN MOTOR VEHICLES; REQUIREMENTS, DIMENSIONS, TESTS |
| DIN 32763:1986-09 | GRADE 2 CLOTHING FOR PROTECTION AGAINST CHEMICALS; SAFETY REQUIREMENTS, TESTING |
| DIN 65349:2001-06 | AEROSPACE - TESTING OF LOCKING TORQUES FOR NUTS AND RELATED THREADED PARTS, WITH METRIC SCREW THREAD - TEST METHODS |
| DIN ISO 16000-25:2012-01 | Indoor air - Part 25: Determination of the emission of semi-volatile organic compounds by building products - Micro-chamber method (ISO 16000-25:2011) |
| DIN 53289:1979-09 | TESTING OF ADHESIVES FOR METALS AND ADHESIVELY BONDED METAL JOINTS; FLOATING ROLLER PEEL TEST |
| DIN 52275-2:1978-08 | Testing of mineral fibrous insulating materials; determination of linear dimensions and bulk density, casings |
| DIN 7708-4:1983-01 | TYPES OF PLASTICS MOULDING COMPOUNDS; MOULDING COMPOUNDS FOR COLD MOULDING |
| BWB TL 8305-0266 : 2ED 2008 | REFLECTING FOILS ON CARRIER FABRIC WITH ENCAPSULATED GLASS BALLS (SOLAS FOILS) |
| DIN 65065:1979-08 | AEROSPACE; RESINS FOR FIBER REINFORCED, TECHNICAL SPECIFICATION |
| DIN 1624:1987-06 | FLAT PRODUCTS OF STEEL - COLD ROLLED NARROW STRIP IN WIDTHS < 650 MM OF MILD UNALLOYED STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN 65571-4:1992-11 | AEROSPACE; REINFORCEMENT FIBRES; DETERMINATION OF FILAMENT DIAMETER OF FILAMENT YARNS; LASER INTERFEROMETRY |
| DIN ISO 16000-4:2012-11 | INDOOR AIR - PART 4: DETERMINATION OF FORMALDEHYDE - DIFFUSIVE SAMPLING METHOD (ISO 16000-4:2011) |
| DIN 61854-1:1987-04 | TEXTILE GLASS - WOVEN GLASS FABRICS FOR PLASTICS REINFORCEMENT - WOVEN GLASS FILAMENT FABRIC AND WOVEN ROVING - TECHNICAL DELIVERY CONDITIONS |
| DIN 4841-1:1990-06 | PROTECTIVE GLOVES; SAFETY REQUIREMENTS, TESTING |
| DIN 16946-1:1989-03 | Cured casting resins; testing |
| DIN ISO 16000-17:2010-06 | Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method (ISO 16000-17:2008) |
| DIN 1053-1:1996-11 | MASONRY - PART 1: DESIGN AND CONSTRUCTION |
| DIN 29972:1988-01 | AEROSPACE - RIGID CELLULAR MATERIALS - SHEET - TECHNICAL SPECIFICATION |
| 07/30161646 DC : 0 | BS EN 15646 - ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN 65382:1988-12 | AEROSPACE; REINFORCEMENT FIBRES FOR PLASTICS; TENSILE TEST OF IMPREGNATED YARN TEST SPECIMENS |
| DIN 53168:1982-03 | TESTING OF PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; DETERMINATION OF RESISTANCE OF PAINT COATINGS AND SIMILAR COATINGS TO CHEMICALS |
| DIN 52185:1976-09 | TESTING OF WOOD; COMPRESSION TEST PARALLEL TO GRAIN |
| DIN 19053:1991-01 | MICROFILM APERTURE CARD FOR FILM 35 MM |
| DIN 58196-1:1996-07 | OPTICAL COATINGS - PART 1: TESTING OF THE ADHESION BY STORING IN DEIONIZED WATER AND IN SALT WATER |
| DIN EN ISO 16000-19:2014-12 | Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012) |
| DIN 53222:1990-11 | DETERMINATION OF VISCOSITY WITH FALLING-ROD VISCOMETER |
| DIN 65572:1992-11 | AEROSPACE; UNIDIRECTIONAL SHEET AND TAPE PREPREG FROM CARBON FIBRES AND NON-REACTIVE THERMOPLASTICS; TECHNICAL SPECIFICATION |
| DIN EN 1542:1999-07 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - MEASUREMENT OF BOND STRENGTH BY PULL-OFF |
| DIN EN 1392:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
| DIN EN ISO 16000-32:2014-10 | INDOOR AIR - PART 32: INVESTIGATION OF BUILDINGS FOR THE OCCURRENCE OF POLLUTANTS (ISO 16000-32:2014) |
| DIN EN 738-1:2002-07 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES |
| DIN 16890:1980-05 | PIPES OF ACRYLNITRILE-BUTADIENE-STYRENE (ABS) OR ACRYLNITRILE-STYRENE-ACRYLESTER (ASA) - GENERAL QUALITY REQUIREMENTS - TESTING |
| DIN 7748-2:1989-03 | PLASTIC MOULDING MATERIALS; UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES |
| DIN EN ISO 7785-1:1999-08 | DENTAL HANDPIECES - PART 1: HIGH-SPEED AIR TURBINE HANDPIECES |
| DIN EN ISO 11498:1999-08 | DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRICAL MOTORS |
| DIN EN 1841:1999-03 | ADHESIVES - TEST METHODS FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES OF A LINOLEUM FLOOR COVERING IN CONTACT WITH AN ADHESIVE |
| DIN 3535-1:1991-07 | SEALANTS FOR GAS SUPPLIES; ELASTOMERIC GASKET MATERIALS FOR GAS VALVES IN DOMESTIC INSTALLATIONS; REQUIREMENTS AND TESTS |
| DIN 34814:1999-09 | PLASTIC HEXAGON NUTS |
| DIN EN 1937:1999-10 | Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures; German version EN 1937:1999 |
| DIN 3535-3:1986-04 | SEALS FOR GAS SUPPLY MATERIALS FOR SEALS OF RUBBER GAS SUPPLY MAINS AND PIPELINES, REQUIREMENTS AND TESTS OF MATERIALS |
| DIN 16911:1978-01 | PLASTIC MOULDING MATERIALS - POLYESTER RESIN MOULDING MATERIALS - TYPES - REQUIREMENTS - TESTING |
| DIN 52459:1981-06 | TESTING OF BUILDING SEALANTS; DETERMINATION OF THE WATER ABSORPTION OF BACKFILL MATERIAL; RETENTIVE CAPACITY |
| DIN 16772-2:1988-12 | PLASTIC MOULDING MATERIALS - ACRYLONITRILE BUTADIENE STYRENE (ABS) MOULDING MATERIALS - PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES |
| DIN EN 737-1:1998-02 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| DIN 51360-2:1981-07 | TESTING OF COOLING LUBRICANTS; DETERMINATION OF CORROSION PREVENTING CHARACTERISTICS OF COOLING LUBRICANTS MIXED WITH WATER; CHIP/FILTER PAPER METHOD |
| DIN 53543:1979-02 | TESTING OF SEMI-RIGID POLYURETHANE (PUR) INTEGRAL CELLULAR MATERIALS; MATERIALS FOR SOLES AND PARTS OF SHOES |
| DIN 53530:1981-02 | TESTING OF ORGANIC MATERIALS; SEPARATION TEST ON FABRIC PLIES BONDED TOGETHER |
| DIN 19070-3:1990-03 | STORAGE QUALITY OF PROCESSED PHOTOSENSITIVE MATERIALS - PRESERVATION ON PROCESSED SAFETY FILMS |
| DIN 7741-2:1988-12 | PLASTIC MOULDING MATERIALS; POLYSTYRENE (PS) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES |
| DIN EN 1724:1999-08 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION |
| DIN EN 1723:1999-10 | LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS |
| DIN 16771-2:1988-12 | PLASTIC MOULDING MATERIALS; STYRENE/BUTADIENE (SB) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES |
| DIN EN 1718:1999-03 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE MEASUREMENT OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT |
| VDI/VDE/DGQ/DKD 2622 Blatt 8:2004-05 | Calibration of measuring equipment for electrical quantities - Direct-current resistors |
| VDI/VDE 3546 Blatt 1:1987-08 | Design of process control rooms; general considerations |
| VDI/VDE 2251 Blatt 8:2007-09 | Precision engineering components - Adhesive connections |
| VDI/VDE 3511 Blatt 5 : 1994-11 | Temperature measurement in industry - Installation of thermometers |
| VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
| DIN 75001:1981-03 | CLASSES OF APPLICATION FOR MEASURING DEVICES IN MOTOR VEHICLES |
| DIN 58390-12:1986-09 | ENVIRONMENTAL TESTING OF OPTICAL INSTRUMENTS - CONTAMINATION |
| DIN 52188:1979-05 | TESTING OF WOOD; DETERMINATION OF ULTIMATE TENSILE STRESS PARALLEL TO GRAIN |
| DIN EN 60763-2 : 2007 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
| DIN 53420:1978-12 | TESTING OF CELLULAR MATERIALS; DETERMINATION OF APPARENT DENSITY |
| DIN 52180-1:1977-11 | TESTING OF WOOD; SAMPLING AND CUTTING, PRINCIPLES |
| DIN 53752:1980-12 | TESTING OF PLASTICS; DETERMINATION OF THE COEFFICIENT OF LINEAR THERMAL EXPANSION |
| DIN 53449-3:1984-05 | TESTING OF PLASTICS; EVALUATION OF ENVIRONMENTAL STRESS CRACKING (ESC); BEN STRIP METHOD |
| DIN 15501:1988-11 | FILM 35 MM, RAW STOCK FILM - SHAPE OF PERFORATION HOLES - DIMENSIONS, FIELD OF APPLICATION |
| DIN 3535-5:1993-12 | SEALANTS FOR GAS SUPPLY; SEALING MATERIALS OF RUBBER, CORK AND SYNTHETIC FIBRES FOR GAS ARMATURES AND GAS APPLIANCES; SAFETY REQUIREMENTS, TESTS |
| DIN 52182:1976-09 | TESTING OF WOOD; DETERMINATION OF DENSITY |
| DIN 65262-3:1996-11 | AEROSPACE SERIES - SEALING COMPOUNDS - PART 3: SILICONE-RUBBER BASE; TECHNICAL SPECIFICATION |
| DIN 4840:1989-02 | PROTECTIVE HELMETS USED IN INDUSTRY, AGRICULTURE AND FORESTRY; SAFETY REQUIREMENTS, TESTING |
| DIN 54341:1988-01 | TESTING OF SEATS IN RAILWAYS FOR PUBLIC TRAFFIC; DETERMINATION OF BURNING BEHAVIOUR WITH A PAPER PILLOW IGNITION SOURCE |
| DIN 51958:1979-03 | TESTING OF ORGANIC FLOORINGS (APART FROM TEXTILES FLOORINGS); CHEMICOPHYSICAL ACTION OF TEST AGENTS UP TO 24 HOURS |
| DIN ISO 69:1999-04 | Cinematography - 16 mm motion-picture and magnetic film - Cutting and perforating dimensions (ISO 69:1998) |
| BWB TL 8010-0038 : 3ED 1995 | INSIDE COATING OF CARTRIDGE CASES OF STEEL - INDUSTRIAL |
| TAPPI/ANSI T 402 sp:2013 | STANDARD CONDITIONING AND TESTING ATMOSPHERES FOR PAPER, BOARD, PULP HANDSHEETS, AND RELATED PRODUCTS |
| DIN 1052-2 : 1988 AMD 1 1996 | STRUCTURAL USE OF TIMBER - MECHANICALY FASTENED JOINTS |
| BWB TL 8010-0044 : 5ED 2008 | WASH PRIMER, FREE FROM CHROMATE, FOR THE PRETREATMENT OF METALS - INDUSTRIAL USE |
| DIN 7708-8:1992-02 | PLASTICS - POURABLE THERMOSETTING MOULDING MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BWB TL 8010-0024 : 4ED 2006 | GROOVE PAINT (SEALING PAINT) FOR AMMUNITION INDUSTRIAL USE CHARACTERISTICS AND APPROVAL PROCEDURE |
| DIN 53157:1987-01 | PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; ASSESSMENT OF THE MECHANICAL DAMPING BEHAVIOUR OF COATINGS USING THE KONIG PENDULUM APPARATUS (PENDULUM DAMPING TEST) |
| DIN 29965:1992-11 | AEROSPACE - CARBON FIBRES - CARBON FIBRE FILAMENT YARNS - TECHNICAL SPECIFICATION |
| BWB TL 8030-0003 : 3ED 1981 | HOT-DIP MATERIALS FOR STRIPPABLE COMPOUNDS FOR THE PROTECTION OF METAL SURFACES |
| DIN 4515:1981-10 | PHOTOGRAPHIC FILMS IN SHEETS FOR GENERAL USE; DIMENSIONS INCLUDING QUANTITY PACKAGING |
| DIN 65142:1989-11 | AEROSPACE; PREIMPREGNATED FIBRE SHEET AND TAPE (PREPREG); DETERMINATION OF BOND STRENGTH |
| DIN 53328:1979-02 | TESTING OF LEATHER, TENSILE TEST |
| DIN 53303-1:1979-02 | TESTING OF LEATHER; PREPARATION OF SAMPLES, CONDITIONING OF TEST SAMPLES AND ACCELERATED AGEING FOR PHYSICAL TESTS |
| DIN 16958:1981-12 | EXTRUDED SHEETS OF POLYMETHYLMETHACRYLATE (PMMA) - TECHNICAL DELIVERY SPECIFICATIONS |
| DIN 51006:2005-07 | Thermal analysis (TA) - Thermogravimetry (TG) - Principles |
| DIN 1850-6:1998-07 | PLAIN BEARINGS - PART 6: THERMOPLASTIC BUSHES |
| DIN 53508:2000-03 | Accelerated ageing of rubber |
| BWB TL 8305-0253 : 6ED 2001 | POLYESTER WOVEN FABRIC, PVC-COATED |
| BWB TL 8010-0025 : 4ED 1998 | SEALING VARNISH FOR AMMUNITION - INDUSTRIAL |
| BWB TL 8010-0017 : 3ED 1989 | COATING SYSTEMS FOR BUNDESWEHR EQUIPMENT MADE OF HOT-GALVANIZED STEEL - INDUSTRIAL |
| DIN 3536:1994-01 | LUBRICANTS FOR GAS VALVES IN INDOOR INSTALLATION, GAS DISTRIBUTION, AND GAS TRANSPORTATION PIPE LINES |
| DIN 65183:1988-12 | AEROSPACE; RAIN TESTING OF ORGANIC COATINGS FOR THE DETERMINATION OF THE RESISTANCE TO EROSION |
| DIN 50942:1996-09 | PHOSPHATING OF METALS - PRINCIPLES, METHODS OF TEST |
| DIN 108-17:1988-12 | Slide projectors and slides; overhead projectors; transparent films, transparencies, projection aids |
| DIN 46400-3:1989-04 | STEEL FLAT PRODUCTS WITH SPECIAL MAGNETIC PROPERTIES; MAGNETIC SHEET AND STRIP, GRAIN ORIENTED; TECHNICAL DELIVERY CONDITIONS |
| DIN 4030-2:2008-06 | Assessment of water, soil and gases for their aggressiveness to concrete - Part 2: Sampling and analysis of water and soil samples |
| DIN 52306:1990-03 | BALL DROP TEST ON SAFETY GLASS FOR VEHICLE GLAZING |
| DIN 50017:1982-10 | ATMOSPHERES AND THEIR TECHNICAL APPLICATION; CONDENSATION WATER TEST ATMOSPHERES |
| DIN 4554:1986-12 | OFFICE FURNITURE (EXCLUDING CHAIRS); REQUIREMENTS AND TESTS |
| DIN 65453:1993-02 | AEROSPACE; PREIMPREGNATED UNIDIRECTIONAL SHEET OF CARBON FIBRES AND BISMALEINIMIDE- OR POLYMIDE RESIN; TECHNICAL SPECIFICATION |
| DIN 55526-1:1991-09 | PACKAGING TEST; COMPRESSION TEST; DYNAMICAL TEST FOR PLASTIC CONTAINERS, WITH A CAPACITY UP TO 10 LITRES |
| DIN 65383:1997-10 | AEROSPACE - THERMOSETTING EPOXY WOVEN GLASS FILAMENT FABRIC PREIMPREGNATED FOR STRUCTURAL APPLICATIONS - TECHNICAL SPECIFICATION |
| DIN ISO 16000-27:2014-11 | INDOOR AIR - PART 27: DETERMINATION OF SETTLED FIBROUS DUST ON SURFACES BY SEM (SCANNING ELECTRON MICROSCOPY) (DIRECT METHOD) (ISO 16000-27:2014) |
| DIN 16850:1980-11 | FLOOR COVERING - HOMOGENE AND HETEROGENE ELASTOMERES FLOORING, REQUIREMENTS, TEST METHODS |
| DIN 50311:1982-01 | TESTING OF ABRASIVES, HARDNESS TEST OF METALLIC ABRASIVES |
| DIN 53441:1984-01 | TESTING OF PLASTICS; STRESS RELAXATION TEST |
| DIN 53494:1984-05 | ELECTROPLATED COATINGS; TESTING OF ELECTROPLATED PLASTIC ARTICLES; DETERMINATION OF PEEL STRENGTH |
| DIN 7707-1:1979-01 | RESIN IMPREGNATED AND COMPRESSED LAMINATED WOOD AND INSULATING WOOD; TEST METHODS |
| DIN 65498:1991-10 | AEROSPACE; POLYETHERIMIDE (PEI) SEMI-FINISHED PRODUCTS AND MOULDED PARTS; TECHNICAL SPECIFICATION |
| DIN 5510-2:2009-05 | PREVENTIVE FIRE PROTECTION IN RAILWAY VEHICLES - PART 2: FIRE BEHAVIOUR AND FIRE SIDE EFFECTS OF MATERIALS AND PARTS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| DIN 65071-2:1992-12 | AEROSPACE; FIBRE REINFORCED MOULDING MATERIALS; PREPARATION OF TEST PANELS OF PLAIN REINFORCING FIBRE PRODUCTS |
| DIN 4102-7:1998-07 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 7: ROOFING; DEFINITIONS, REQUIREMENTS AND TESTING |
| DIN EN 927-5:2007-03 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability |
| DIN EN ISO 9863-2:1996-10 | Determination of thickness of geotextiles and geotextile-related products at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996) |
| DIN 53443-1:1984-01 | TESTING OF PLASTICS; MULTIAXIAL IMPACT BEHAVIOUR; FALLING WEIGHT TEST |
| DIN 53449-2:1984-05 | TESTING OF PLASTICS; EVALUATION OF ENVIRONMENT STRESS CRACKING (ESC); CONSTANT TENSILE STRESS METHOD |
| DIN 53283:1979-09 | TESTING OF ADHESIVES FOR METALS AND ADHESIVELY BONDED METAL JOINTS; DETERMINATION OF THE SHEAR STRENGTH OF SINGLE LAP JOINTS IN SHEAR BY TENSION LOADING |
| DIN ISO 9236-1:2007-08 | Photography - Sensitometry of screen/film systems for medical radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient (ISO 9236-1:2004) |
| BWB TL 8010-0045 : 1ED 2006 | DECKBESCHICHTUNGSSTOFFE FUER LUFTFAHRZEUGE 2-KOMPONENTEN-POLYURETHAN-DECKBESCHICHTUNGSSTOFFE, BW-EIGENBEDARF |
| DIN 68764-1:1973-09 | PARTICLE BOARDS; EXTRUDED BOARDS FOR THE BUILDING, TERMS, PROPERTIES, TESTING, SUPERVISION |
| BWB TL 8010-0026 : 3ED 2006 | BONDED LUBRICANT FOR OUTSIDE VARNISHING OF CARTRIDGE CASES OF STEEL - INDUSTRIAL |
| DIN 53443-2:1984-01 | TESTING OF PLASTICS, MULTIAXIAL IMPACT BEHAVIOUR; IMPACT PENETRATION TEST COMBINED WITH DATA PROCESSING BY MEANS OF ELECTRONIC DEVICES |
| DIN 7470:1982-01 | SAFETY HARNESSES; SAFETY BELTS; SAFETY REQUIREMENTS, TESTING |
| DIN 18230-2:1999-01 | STRUCTURAL FIRE PROTECTION IN INDUSTRIAL BUILDINGS - PART 2: DETERMINATION OF COMBUSTION BEHAVIOUR OF MATERIALS IN STORAGE ARRANGEMENT - COMBUSTION FACTOR M |
| DIN 53447:1981-01 | TESTING OF PLASTICS; DETERMINATION OF STIFFNESS IN TORSION AS A FUNCTION OF TEMPERATURE |
| DIN 4518-2:1988-07 | Photosensitive materials for reprographic and micrographic use; dimensions; diazo type |
| BWB TL 8135-0032 : 4ED 1995 | PACKING AIDS, BULK FILLERS MADE OF POLYSTYRENE FOAM (EPS) |
| DIN 51004:1994-06 | THERMAL ANALYSIS - DETERMINATION OF MELTING TEMPERATURES OF CRYSTALLINE MATERIALS BY DIFFERENTIAL THERMAL ANALYSIS |
| DIN 68754-1:1976-02 | HARD AND MEDIUM HARD FIBRE BOARDS FOR THE BUILDING; GRADE 20 OF DERIVED TIMBER PRODUCTS |
| DIN 51007:1994-06 | THERMAL ANALYSIS; DIFFERENTIAL THERMAL ANALYSIS; PRINCIPLES |
| DIN 16946-2:1989-03 | Cured casting resins; types |
| DIN 4815-4:1987-04 | HOSES FOR LPG; HOSES AND HOSE ASSEMBLIES FOR FUEL GAS INSTALLATIONS IN VEHICLES |
| VDE 0472-503 : 1985 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS; SURFACE INSULATION RESISTANCE OF SHEATH |
| VDE 0303-3 : 1983 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS - MEASURING OF THE ELECTRICAL RESISTANCE OF NON-METALLIC MATERIALS |
| BWB TL 8135-0035 : 6ED 2008 | PACKAGING MATERIALS, BUBBLE PLASTIC SHEETS MADE OF POLYETHYLENE |
| DIN 52186:1978-06 | TESTING OF WOOD; BENDING TEST |
| VDE 0472-603 : 1989 | TESTING OF CABLES, WIRES & FLEXIBLE CORD - BENDING BEHAVIOUR |
| VDE 0291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES - CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| DIN 15851-3:1978-12 | FILM 8 MM TYPE S; MOTION-PICTURE FILM RAW STOCK, DIMENSIONS |
| DIN 50988-1:1984-02 | MEASUREMENT OF COATING THICKNESS; DETERMINATION OF THE MASS PER UNIT AREA OF ZINC- AND TIN-COATINGS ON FERROUS MATERIALS BY DISSOLUTION OF THE COATING MATERIAL; GRAVIMETRIC METHOD |
| DIN 65262-2:1998-05 | AEROSPACE SERIES - SEALING COMPOUNDS - PART 2: VINYLIDENE FLUORIDE AND HEXAFLUOROPROPYLENE BASE; TECHNICAL SPECIFICATION |
| DIN 65567:1992-10 | AEROSPACE; REINFORCEMENT FIBRES; DETERMINATION OF FINISH CONTENT OF ARAMID FILAMENT YARNS, WOVEN FABRICS AND CHOPPED STRANDS |
| DIN 14151-2:2004-08 | RESCUE BLANKETS AND CUSHIONS - PART 2: JUMPING SHEETS TYPE 8 - REQUIREMENTS, TESTING |
| DIN 65566:1992-10 | AEROSPACE; REINFORCEMENT FIBRES; DETERMINATION OF SIZE CONTENT OF CARBON FILAMENT YARNS, WOVEN FABRICS AND CHOPPED STRANDS |
| DIN 65071-1:1992-12 | AEROSPACE; FIBRE REINFORCED MOULDING MATERIALS; PREPARATION OF TEST PANELS OF UNIDIRECTIONAL WOUND YARNS AND ROVINGS |
| DIN 32867-2:1990-05 | DRAWING TOOLS FOR NUMERICALLY CONTROLLED DRAWING MACHINES (PLOTTERS); TESTING OF LINE-THICKNESSES |
| DIN 75521-1:1992-02 | SPEEDOMETER HEADLAMP MOUNTING FOR MOTORCYCLES |
| DIN 50012:1981-08 | CLIMATES AND THEIR TECHNICAL APPLICATION; NATURE OF THE CABINET CONDITIONED WITH STANDARD ATMOSPHERES; MEASURING OF THE RELATIVE HUMIDITY |
| DIN 4512-9:1993-01 | Photographic sensitometry, determination of optical density; spectral conditions |
| DIN 1100:2004-05 | Hard aggregates for cement-bound floor screeds - Requirements and test methods |
| DIN 51408-1:1983-06 | TESTING OF LIQUID MINERAL OIL HYDROCARBONS; DETERMINATION OF CHLORINE CONTENT; WICKBOLD'S COMBUSTION METHOD |
| DIN 1850-5:1998-07 | PLAIN BEARINGS - PART 5: THERMOSET PLASTIC BUSHES |
| BWB TL 9330-0012 : 3ED 2006 | |
| DIN 7872:1990-11 | WATER SPORTS EQUIPMENT; INFLATABLE BATHING BOATS WITH SAIL AND/OR MOTOR; SAFETY REQUIREMENTS AND TESTING |
| DIN 75220:1992-11 | AGEING OF AUTOMOTIVE COMPONENTS IN SOLAR SIMULATION UNITS |
| DIN 3419-1:1998-05 | SLIDE FASTENERS; TECHNICAL DELIVERY CONDITIONS |
| DIN 68765:1987-11 | PARTICLE BOARDS - DECORATIVE LAMINATED PARTICLE BOARDS - TERMS, REQUIREMENTS |
| VDA 309 : 2016 | EKB SPECIFICATIONS FOR DISC BRAKE PAD NOISE DAMPING SHIMS (INSULATORS) |
| DIN 53356:1982-08 | TESTING OF ARTIFICIAL LEATHER AND SIMILAR SHEET MATERIALS; TEAR GROWTH TEST |
| DIN 53433:1983-07 | TESTING OF RIGID CELLULAR PLASTICS; DETERMINATION OF WATER ABSORPTION BY WATER IMMERSION |
| DIN 55471-1:1983-10 | CELLULAR POLYSTYRENE FOR PACKAGING; REQUIREMENTS AND TESTING |
| DIN VDE 0472-503 : 1985 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS; SURFACE INSULATION RESISTANCE OF SHEATH |
| DIN ISO 16000-29:2015-02 | INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS (ISO 16000-29:2014) |
| DIN ISO 2976:2005-10 | Coated abrasives - Abrasive belts - Selection of width/length combinations (ISO 2976:2005) |
| DIN 29970:1998-09 | AEROSPACE - HONEYCOMB CORES OF POLYAMIDE PAPER, PHENOLIC RESIN COATED - TECHNICAL SPECIFICATION |
| DIN 65564:1992-10 | AEROSPACE; REINFORCEMENT FIBRES; QUALITATIVE DETERMINATION OF SIZE CONSTITUENTS OF CARBON FILAMENT YARNS, WOVEN FABRICS AND CHOPPED STRANDS BY HPLC |
| BWB TL 5110-0023 : 3ED 1994 | POCKET KNIFE |
| DIN 29850:1989-10 | AEROSPACE - HEAT TREATMENT OF WROUGHT ALUMINIUM ALLOYS |
| DIN 52451:1983-02 | TESTING OF BUILDING SEALANTS; DETERMINATION OF THE CHANGE IN VOLUME AFTER THERMAL STRESS; DIPPING AND WEIGHING METHOD |
| DIN 14940:1990-04 | FIREMEN'S HELMET - REQUIREMENTS, TESTING |
| DIN 7744-2:1989-01 | PLASTIC MOULDING MATERIALS; POLYCARBONATE (PC) MOULDING MATERIALS, PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES |
| DIN 50955:1983-12 | MEASUREMENT OF COATING THICKNESSES; MEASUREMENT OF THICKNESS OF METALLIC COATINGS BY LOCAL ANODIC DISSOLUTION; COULOMETRIC METHOD |
| DIN 54451:1978-11 | TESTING OF ADHESIVES FOR METALS AND BONDED METAL JOINTS; TENSILE SHEAR TEST FOR THE DETERMINATION OF THE SHEAR STRESS-STRAIN DIAGRAM OF AN ADHESIVE IN A BONDED JOINT |
| DIN ISO 16000-20:2015-11 | INDOOR AIR - PART 20: DETECTION AND ENUMERATION OF MOULDS - DETERMINATION OF TOTAL SPORE COUNT (ISO 16000-20:2014) |
| DIN 65271:2002-07 | AEROSPACE SERIES - ELASTOMERIC SEMI-FINISHED PRODUCTS AND PARTS - TECHNICAL SPECIFICATION |
| DIN 18560-3:2006-03 | FLOOR SCREEDS IN BUILDING CONSTRUCTION - PART 3: BASE-BONDED FLOOR SCREEDS |
| DIN 58993:1991-02 | RUBBER LATEX CONDOMS; REQUIREMENTS AND TESTING |
| DIN 4815-3:1985-07 | FLEXIBLE TUBES FOR LPG; FLEXIBLE TUBES FOR FILLING AND EMPTYING OF TRANSPORTATION VEHICLES |
| DIN 65629:1993-12 | AEROSPACE; FABRIC SHEET AND TAPE PREPREG FROM CARBON FIBRES AND NON-REACTIVE THERMOPLASTICS; TECHNICAL SPECIFICATION |
| DIN 15551-1:1983-09 | RADIATION SENSITIVE FILMS, SAFETY FILM, CONCEPTS, REQUIREMENTS, TESTING |
| DIN 53218:1981-05 | TESTING OF PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; VISUAL COMPARISON OF THE COLOUR OF PAINT COATINGS AND SIMILAR COATINGS |
| DIN EN ISO 12236:2006-11 | Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
| DIN 52184:1979-05 | TESTING OF WOOD; DETERMINATION OF SWELLING AND SHRINKAGE |
| DIN 53449-1:1984-05 | TESTING OF PLASTICS; EVALUATION OF ENVIRONMENTAL STRESS CRACKING (ESC); BALL OR PIN IMPRESSION METHOD |
| DIN ISO 16000-18:2012-01 | Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011 + Cor.1:2011) |
| DIN 50141:1982-01 | TESTING OF METALLIC MATERIALS; SHEARING TEST |
| BWB TL 8305-0207 : 4ED 2004 | |
| BWB TL 8030-0007 : 4ED 1985 | SEALING COMPOUND FOR PACKAGES (HOT-DIP PROCESS) |
| DIN 52289:1998-09 | ROAD VEHICLES - SAFETY GLAZING MATERIALS - DETERMINATION OF THE CHEMICAL RESISTANCE |
| DIN 65066:1991-08 | AEROSPACE; TEXTILE GLASS; WOVEN GLASS FILAMENT FABRIC; TECHNICAL SPECIFICATION |
| DIN 52310:1986-07 | HEADFORM IMPACT TEST ON SAFETY GLASS FOR VEHICLE GLAZING |
| DIN 65054:1989-06 | AEROSPACE; PRESSURE SENSITIVE ADHESIVE FILMS FOR MARKING; TECHNICAL SPECIFICATION |
| DIN 68761-1:1986-11 | PARTICLE BOARDS; FLAT PRESSED BOARDS FOR GENERAL PURPOSES; FPY-BOARD |
| DIN 8559-1:1984-07 | WELDING FILLER METALS FOR GAS-SHIELDED WELDING; WIRE ELECTRODES FILLER RODS AND SOLID WIRES FOR GAS-SHIELDED WELDING OF UNALLOYED AND ALLOYED STEELS |
| DIN VDE 0472-603 : 1989 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS - BENDING BEHAVIOUR |
| DIN ISO 6199:2008-12 | MICROGRAPHICS - MICROFILMING OF DOCUMENTS ON 16 MM AND 35 MM SILVER-GELATIN TYPE MICROFILM - OPERATING PROCEDURES |
| VDA 402 : 2011 | |
| DIN EN ISO 16000-26:2012-11 | Indoor air - Part 26: Sampling strategy for carbon dioxide (CO<(Index)2>) (ISO 16000-26:2012); German version EN ISO 16000-26:2012 |
| DIN 4518-1:1988-07 | Photosensitive materials for reprographic and micrographic use; dimensions; silver halide type |
| DIN 61855-1:1987-04 | TEXTILE GLASS; GLASS ROVING FOR PLASTICS REINFORCEMENT; TECHNICAL DELIVERY CONDITIONS |
| DIN 65378:1989-11 | Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction |
| DIN 3761-10:1984-01 | ROTARY SHAFT LIP TYPE SEALS FOR AUTOMOBILES; TEST; TEST MACHINES AND SPECIFICATIONS |
| DIN 53435:1983-07 | TESTING OF PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES AND IMPACT RESISTANCE WITH DYNSTAT TEST SPECIMENS |
| BWB TL 8305-0148 : 5ED 2000 | PVC-COATED WOVEN FABRICS |
| BWB TL 8010-0047 : 2ED MAY 2006 | |
| DIN ISO 1012:2000-04 | PHOTOGRAPHY - FILM IN SHEETS AND ROLLS FOR GENERAL USE - DIMENSIONS |
| DIN ISO 16000-19:2012-12 | INDOOR AIR - PART 19: SAMPLING STRATEGY FOR MOULDS (ISO 16000-19:2012) |
| DIN 3761-8:1984-01 | ROTARY SHAFT LIP TYPE SEALS FOR AUTOMOBILES; TEST; CARRYING OUT AXLE SECTIONS |
| DIN 50118:1982-01 | TESTING OF METALLIC MATERIALS; STRESS-RUPTURE TEST, CREEP TEST WITH TENSILE STRESS |
| DIN 53151:1981-05 | TESTING OF PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; CROSS-CUT TEST AN PAINT COATINGS AND SIMILAR COATINGS |
| DIN 46400-1:1983-04 | STEEL FLAT PRODUCTS WITH SPECIAL MAGNETIC PROPERTIES; MAGNETIC STEEL SHEET AND STRIP, COLD ROLLED, NON-ORIENTED, FINALLY ANNEALED CONDITIONS; TECHNICAL DELIVERY CONDITIONS |
| DIN 69130:1976-06 | ABRASIVE BELTS - DIMENSIONS |
| DIN 3754-1:1984-05 | GASKET MATERIALS - COMPRESSED ASBESTOS FIBRE SHEETS - DIMENSIONS, REQUIREMENTS, TESTING |
| DIN 3547-1:1990-06 | PN 4 TO PN 16 GAS AND WATER STOPVALVES; REQUIREMENTS AND ACCEPTANCE TESTING |
| DIN 53769-1:1988-11 | TESTING OF PIPELINES OF GLASS FIBRE REINFORCED PLASTICS - DETERMINATION OF ADHESIVE SHEAR STRENGTH OF PIPES AND FITTINGS OF PIPETYPE B |
| DIN 29978:1994-12 | AEROSPACE - HONEYCOMB CORES, HEXAGONAL EXPANDED, IN WROUGHT ALUMINIUM ALLOY, CORROSION PROTECTED, UNPERFORATED OR PERFORATED - TECHNICAL SPECIFICATION |
| DIN 53281-2:1979-09 | TESTING OF ADHESIVES FOR METALS AND ADHESIVELY BONDED METAL JOINTS; TEST SPECIMENS, MANUFACTURING |
| DIN 52192:1979-05 | TESTING OF WOOD; COMPRESSION TEST PERPENDICULAR TO GRAIN |
| DIN 16230:1983-11 | MEASUREMENT AND CONTROL - CHARTS FOR STRIP CHART RECORDER |
| DIN EN ISO 25619-2:2015-12 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR (ISO 25619-2:2015) |
| DIN 54452:1981-11 | TESTING OF ADHESIVES FOR METALS AND ADHESIVELY BONDED METAL JOINTS; COMPRESSION SHEAR TEST |
| DIN 7724:1993-04 | POLYMERIC MATERIALS; GROUPING OF POLYMERIC MATERIALS BASED ON THEIR MECHANICAL BEHAVIOUR |
| DIN 58946-3:1981-11 | STERILIZATION - STEAM STERILIZERS - TEST OF EFFICACY |
| DIN 53509-1:2001-01 | TESTING OF RUBBER - DETERMINATION OF RESISTANCE TO OZONE CRACKING - PART 1: STATIC CONDITIONS |
| DIN EN ISO 9012:2011-12 | Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2008) |
| DIN ISO 16000-14:2012-03 | Indoor air - Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) - Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry (ISO 16000-14:2009) |
| DIN 3761-11:1984-01 | ROTARY SHAFT LIP TYPE SEALS FOR AUTOMOBILES; TEST; EVALUATION OF LEAKAGE |
| DIN 28055-2:2002-04 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING |
| DIN 16913-3:1981-04 | PLASTICS - MOULDING MATERIALS - REINFORCED THERMOSETTING MOULDING MATERIALS - SHEET MOULDING COMPOUNDS, TYPES - SPECIFICATIONS |
| DIN 272:1986-02 | TESTING OF MAGNESIA FLOOR SCREEDS |
| DIN ISO 16000-24:2013-01 | INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUND (EXCEPT FORMALDEHYDE) CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS (ISO 16000-24:2009) |
| DIN EN ISO 10319:2015-09 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
| DIN EN ISO 3219:1994-10 | Determination of viscosity of polymers and resins in the liquid state or as emulsions or dispersions using a rotational viscometer with defined shear rate (ISO 3219:1993) |
| DIN EN ISO 13431:1999-11 | Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) |
| DIN 6720-1:1978-02 | PAPERS FOR TELEPRINTERS - PAGE PRINTER PAPERS IN ROLLS AND AS CONTINUOUS FORMS |
| DIN EN 739:2002-07 | LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| DIN VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS - ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
| DIN 1358 : 1971 | METEOROLOGY AND GEOPHYSICS - LETTER SYMBOLS |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
Summarise