ISO 554:1976
Current
Current
The latest, up-to-date edition.
Standard atmospheres for conditioning and/or testing — Specifications
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
08-01-1976
Specifies three atmospheres approximated to the natural environmental conditions. However, it is desirable to use only one of these.
Committee |
ISO/TMBG
|
DocumentType |
Standard
|
Pages |
1
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
NBN EN 29539 : 1992 | Identical |
NS 4485 : 1ED 1983 | Identical |
UNI ISO 554 : 1987 | Identical |
UNE 7520:1994 | Similar to |
DIN 50014:1985-07 | Identical |
PREN 927-10 : DRAFT 2017 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
PD CEN/TS 16360:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of film extensibility by indentation of a coating on a wooden substrate |
97/713385 DC : DRAFT AUG 1997 | PREN 3656 - AEROSPACE SERIES - POLYCARBONATE SELF-EXTINGUISHING LOW SMOKE EMISSION - CHARACTERISTICS |
ASTM F 2546 : 2007 | Standard Test Method for Snowboard Step-in Bindings |
ISO/IEC 14473:1999 | Information technology — Office equipment — Minimum information to be specified for image scanners |
09/30096507 DC : DRAFT APR 2009 | BS ISO 1143 - METALLIC MATERIALS - ROTATING BAR BENDING FATIGUE TESTING |
BS ISO 16840-2:2018 | Wheelchair seating Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
14/30250513 DC : 0 | BS EN ISO 9863-1 - GEOSYNTHETICS - DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES - PART 1: SINGLE LAYERS |
NAPM IT2.4 : 0 | PHOTOGRAPHY (SENSITOMETRY) - BLACK-AND-WHITE AERIAL CAMERA FILMS - DETERMINATION OF ISO SPEED AND AVERAGE GRADIENT |
13/30255888 DC : 0 | BS ISO 5660-1 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 1: HEAT RELEASE RATE (CONE CALORIMETER METHOD) AND SMOKE PRODUCTION RATE (DYNAMIC MEASUREMENT) |
BS EN 60068-1:2014 | Environmental testing General and guidance |
I.S. EN 731:1995 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS |
PD CEN/TS 16498:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of tannin staining |
UNI EN ISO 10580 : 2012 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - TEST METHOD FOR VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS |
NF EN ISO 10722 : 2007 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
BS EN 62849:2016 | Performance evaluation methods of mobile household robots |
BS ISO 16000-25:2011 | Indoor air Determination of the emission of semi-volatile organic compounds by building products. Micro-chamber method |
05/30132008 DC : DRAFT APR 2005 | BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
BS 7079-B6(1996) : 1996 AMD 10698 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS BY THE BRESLE METHOD |
BS ISO 8127-2:1999 | Micrographics. A6 size microfilm jackets Other types of jacket for 16 mm and 35 mm microfilm |
I.S. EN 1722:1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE MAXIMUM TENSILE STRENGTH |
PD IEC/TR 60721-4-3:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations |
BS ISO 3029:1995 | Photography. 126 size cartridges. Dimensions of cartridge, film and backing paper |
I.S. EN ISO 22523:2006 | EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
ISO 16000-9:2006 | Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
16/30336459 DC : 0 | BS EN ISO 13426-1 - GEOTEXTILES AND GEOTEXTILES-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
I.S. EN 1724:1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION |
BS ISO 1009:2000 | Photography. Paper dimensions. Rolls for printers |
06/30137671 DC : DRAFT OCT 2006 | ISO 9012 - GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS |
BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
UNI EN 16402 : 2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
I.S. EN ISO 13433:2006 | GEOSYNTHETICS - DYNAMIC PERFORATION TEST (CONE DROP TEST) |
BS ISO 12575-1:2012 | Thermal insulation. Exterior insulating systems for foundations Material specification |
NF EN 15815 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION |
02/108180 DC : DRAFT JAN 2003 | EN ISO 9864 - GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA OF GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS |
10/30215108 DC : 0 | BS EN 60312-2 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 2: WET VACUUM CLEANERS - METHODS OF MEASURING THE PERFORMANCE |
03/109881 DC : DRAFT JULY 2003 | ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND CYLINDRICAL OUTSIDE SURFACE |
BS ISO 15635:2001 | Coated abrasives. Flap discs |
S.R. CEN/TS 16499:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
BS ISO/TR 14696:1999 | Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL) |
PREN 1372 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
07/30137665 DC : 0 | BS ISO 2503 - GAS WELDING EQUIPMENT - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR |
S.R. CEN/TS 16359:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
DIN EN 15813:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures |
ISO 5175-2:2017 | Gas welding equipment — Safety devices — Part 2: Devices not incorporating a flame (flashback) arrestor |
I.S. EN 15646:2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
02/102699 DC : DRAFT MAY 2002 | PREN 14418 - GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
06/30160065 DC : 0 | BS EN ISO 11143 ED 2 - DENTAL EQUIPMENT - AMALGAM SEPARATORS |
BS EN 60312:2008 | Vacuum cleaners for household use. Methods of measuring the performance |
BS 903-A35:1978 | Methods of testing vulcanized rubber. Temperatures, humidities and times for conditioning and testing of test pieces |
02/105049 DC : DRAFT AUG 2002 | BS EN ISO 13428 - GEOSYNTHETICS - DETERMINATION OF THE PROTECTION EFFICIENCY OF A GEOSYNTHETIC AGAINST IMPACT DAMAGE |
08/30172620 DC : DRAFT OCT 2008 | BS EN ISO 8536-6 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES |
BIS IS/ISO 15635 : 2001 | COATED ABRASIVES - FLAP DISCS |
I.S. EN ISO 9863-2:1997 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES - PART 2: PROCEDURE FOR DETERMINATION OF THICKNESS OF SINGLE LAYERS OF MULTILAYER PRODUCTS |
06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
DIN EN 15819:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
DIN EN 15820:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness |
04/19987165 DC : DRAFT SEP 2004 | BS EN 13200-4 - SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT REQUIREMENTS |
I.S. ENV 13419-2:1999 | BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 2: EMISSION TEST CELL METHOD |
PD IEC TR 60721-4-6:2002 | Ship environmentClassification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 |
08/30170025 DC : DRAFT AUG 2008 | BS ISO 28620 - MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES |
DIN EN ISO 9239-1:2010-11 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
14/30296756 DC : 0 | BS EN 1902 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
BS ISO 9236-1:2004 | Photography. Sensitometry of screen/film systems for medical radiography Determination of sensitometric curve shape, speed and average gradient |
DD IEC/PAS 62611:2009 | Vacuum cleaners for commercial use. Methods for measuring performance |
BS ISO 8127-1:1989 | Micrographics. A6 size microfilm jackets Five-channel jacket for 16 mm microfilm |
BS 7825-3.6:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Dimensional properties |
PD CEN/TS 16516:2013 | Construction products. Assessment of release of dangerous substances. Determination of emissions into indoor air |
DIN ISO 16000-28:2012-12 | Indoor air - Part 28: Determination of odour emissions from building products using test chambers (ISO 16000-28:2012) |
I.S. EN ISO 1716:2010 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
UNE-EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
13/30275218 DC : 0 | BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE |
12/30248096 DC : 0 | BS ISO 17178 - ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
97/713392 DC : DRAFT AUG 1997 | PREN 4243 - AEROSPACE SERIES - ACRYLIC (PMMA) SHEETS - TECHNICAL SPECIFICATION |
INCITS/ISO/IEC 11159 : 1996 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
BS ISO 17554:2014 | Reaction to fire tests. Mass loss measurement |
BS ISO 3434:2012 | Ships and marine technology. Heated glass panes for ships’ rectangular windows |
BIS IS/ISO 21948 : 2001 | COATED ABRASIVES - PLAIN SHEETS |
05/30131382 DC : DRAFT MAR 2005 | BS EN 15184 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION COATED STEEL TO CONCRETE (PULL-OUT TEST) |
BS EN 15820:2011 | Polymer modified bituminous thick coatings for waterproofing. Determination of watertightness |
14/30296676 DC : 0 | BS EN 60312-2 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 2: WET CARPET CLEANING APPLIANCES - METHODS FOR MEASURING THE PERFORMANCE |
13/30279122 DC : 0 | BS ISO 11110 - WINTER-SPORTS EQUIPMENT - TEST DEVICES FOR THE SETTING OF THE FUNCTIONAL UNIT SKI/BOOT/BINDING - REQUIREMENTS AND TESTS |
03/101771 DC : 0 | ISO 7331 - SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
S.R. CEN/TS 16360:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE |
BS 7007-3:1988 | Abrasive products Specification for dimensional tolerances on non-standard coated abrasive products |
BS ISO 21948:2001 | Coated abrasives. Plain sheets |
PREN 13483 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
BS 3999-12:1982 | Methods of measuring the performance of household electrical appliances Vacuum cleaners |
BS ISO 14546:2000 | Photography. Aerial films and spools. Dimensions |
UNE-EN 15646:2010 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
I.S. ENV 13419-1:1999 | BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 1: EMISSION TEST CHAMBER METHOD |
I.S. EN ISO 10580:2012 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - TEST METHOD FOR VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS (ISO 10580:2010) |
DD ENV ISO 10722-1:1998 | Geotextiles and geotextile-related products. Procedure for simulating damage during installation. Installation in granular materials |
PREN 4366 : 200P1 | AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, MULTI-AXIALLY STRETCHED, AND LOW MOISTURE ABSORPTION - PROPERTIES |
PREN 3656 : 200P1 | AEROSPACE SERIES - POLYCARBONATE, SELF-EXTINGUISHING, LOW SMOKE EMISSION - CHARACTERISTICS |
ISO 16840-3:2014 | Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices |
PREN 2719 : 200P1 | AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION |
INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
PREN 4243 : 200P1 | AEROSPACE SERIES - CAST ACRYLIC SHEETS - TECHNICAL SPECIFICATION |
PREN 4364 : 200P1 | AEROSPACE SERIES - CAST ACRYLIC - PROPERTIES |
DIN EN ISO 1716:2010-11 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
ISO 2421:2003 | Coated abrasives — Cylindrical sleeves |
CEI EN 62885-3 : 2016 | SURFACE CLEANING APPLIANCES - PART 3: WET CARPET CLEANING APPLIANCES - METHODS FOR MEASURING THE PERFORMANCE |
S.R. CR 13259:1998 | GAS WELDING EQUIPMENT - INDUSTRIAL MANUAL AND MACHINE OXYGEN-FUEL GASES BLOWPIPES FOR FLAME HEATING AND ALLIED PROCESSES |
I.S. EN 62929:2014 | CLEANING ROBOTS FOR HOUSEHOLD USE - DRY CLEANING: METHODS OF MEASURING PERFORMANCE |
I.S. EN 927-6:2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
I.S. 140-3:1987 | SCHOOL FURNITURE - PART 3: PERFORMANCE REQUIREMENTS AND TESTS FOR TABLES FOR SCHOOLS |
I.S. EN 15817:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - WATER RESISTANCE |
PREN 1373 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
BS ISO 16000-23:2009 | Indoor air Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials |
ISO 8127-2:1999 | Micrographics A6 size microfilm jackets Part 2: Other types of jacket for 16 mm and 35 mm microfilm |
I.S. EN 60068-1:2014 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE |
ISO 13785-2:2002 | Reaction-to-fire tests for façades — Part 2: Large-scale test |
I.S. EN ISO 5175-2:2017&LC:2019 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 2: NOT INCORPORATING A FLAME (FLASHBACK) ARRESTOR (ISO 5175-2:2017) |
BS ISO 12232:2006 | Photography. Digital still cameras. Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index |
ISO 2976:2005 | Coated abrasives Abrasive belts Selection of width/length combinations |
UNI CEN/TS 16360 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE |
BS EN 927-6:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
ISO 21950:2001 | Coated abrasives Plain discs |
ISO 9236-3:1999 | Photography Sensitometry of screen/film systems for medical radiography Part 3: Determination of sensitometric curve shape, speed and average gradient for mammography |
ISO 12232:2006 | Photography Digital still cameras Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index |
UNE-EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
ISO 16840-6:2015 | Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions |
I.S. EN ISO 3665:2013 | PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS (ISO 3665:2011) |
UNI EN ISO 1716 : 2010 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
ANSI PH1.17 : 1990 | PHOTOGRAPHY (FILM) - MEDICAL RADIOGRAPHIC SHEET AND ROLL FILMS - DIMENSIONS |
ASTM F 944 : 1997 | Standard Specification for Properties of Adult Alpine Ski Boots (Withdrawn 2004) |
17/30362165 DC : 0 | BS EN 16402 - PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
NF ISO 15344 : 2005 | SNOWBOARD STEP-IN BINDINGS - REQUIREMENTS AND TEST METHODS |
NF EN ISO 10773 : 2011 | CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF PERMEABILITY TO GASES |
NF EN 15646 : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
ASTM F 1722 : 2015 : REDLINE | Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis |
ISO 16000-25:2011 | Indoor air Part 25: Determination of the emission of semi-volatile organic compounds by building products Micro-chamber method |
I.S. EN ISO 9539:2010 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010) |
EN ISO 10722:2007 | Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007) |
ASTM D 4933 : 2016 : REDLINE | Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
ASTM F 2495 : 2005 : R2011 | Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment (Withdrawn 2020) |
ISO/TR 5660-3:2003 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement |
EN 1263-1:2014 | Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods |
I.S. EN 927-3:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
I.S. EN ISO 3630-1:2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
UNI EN ISO 3630-1 : 2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
DIN EN 13999-1:2014-03 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
DIN EN 13483:2013-09 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
DIN EN 13415:2010-05 | TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
DIN EN ISO 11143:2008-10 | DENTISTRY - AMALGAM SEPARATORS |
DIN EN ISO 10321:2008-08 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
DIN EN ISO 10062:2008-04 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006) |
UNE-EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
BS EN 12706:2000 | Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics |
ONORM EN ISO 3630-1 : 2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
BS EN 13743:2017 | Safety requirements for coated abrasive products |
BS EN ISO 11498:2000 | Dental handpieces. Dental low-voltage electric motors |
BS EN ISO 7291 : 2010 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS FOR MANIFOLD SYSTEMS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 30 MPA (300 BAR) |
UNE-EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
BS EN ISO 2503 : 2009 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR (30 MPA) |
BS EN ISO 10321:2008 | Geosynthetics. Tensile test for joints/seams by wide-width strip method |
ISO 10773:2011 | Clay geosynthetic barriers Determination of permeability to gases |
UNE-EN ISO 13427:2015 | Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014) |
BS EN 927-4:2000 | Paints and varnishes. Coating materials and coating systems for exterior wood Assessment of the water-vapour permeability |
UNE-EN 13999-1:2014 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
BS EN ISO 22523:2006 | External limb prostheses and external orthoses. Requirements and test methods |
BS EN 964-1:1995 | Geotextiles and geotextile-related products. Determination of thickness at specified pressures Single layers |
BS EN ISO 9864:2005 | Geosynthetics. Test method for the determination of mass per unit area of geotextiles and geotextile-related products |
BS EN ISO 9073-10:2004 | Textiles. Test methods for nonwovens Lint and other particles generation in the dry state |
BS EN 1895:2001 | Adhesives for paper and board, packaging and disposable sanitary products. 180°. \'T\' peel test for a flexible-to-flexible assembly |
BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
ISO 13428:2005 | Geosynthetics — Determination of the protection efficiency of a geosynthetic against impact damage |
I.S. EN ISO 10321:2008 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
I.S. EN ISO 9239-1:2010 | REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
CEN/TS 16498:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining |
EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
DIN ISO 5355:2006-05 | ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
DIN EN ISO 13426-2:2005-08 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) |
CEN/TS 16499:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood |
DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
DIN EN ISO 13433:2006-10 | GEOSYNTHETICS - DYNAMIC PERFORATION TEST (CONE DROP TEST) |
CR 13259:1998 | Gas welding equipment - Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes |
EN 1129-2 : 1995 | FURNITURE - FOLDAWAY BEDS - SAFETY REQUIREMENTS AND TESTING - PART 2: TEST METHODS |
DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
EN 13057:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
EN 13408:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength |
EN 62849:2016 | Performance evaluation methods of mobile household robots |
EN 62826:2014 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance |
EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
DIN EN ISO 9864:2005-05 | Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005) |
EN ISO 22523 : 2006 | EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS (ISO 22523:2006) |
EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
NF EN ISO 3630-1 : 2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
EN 12706:1999 | Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics |
NF EN ISO 13426-1 : 2004 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
EN 13409:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time |
ONORM EN 13200-4 : 2006 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
NF EN 13200-4 : 2007 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
ONORM EN 16416 : 2013 | GEOSYNTHETIC CLAY BARRIERS - DETERMINATION OF WATER FLUX INDEX - FLEXIBLE WALL PERMEAMETER METHOD AT CONSTANT HEAD |
I.S. EN 13200-4:2006 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
OVE/ONORM EN 62929 : 2015 | CLEANING ROBOTS FOR HOUSEHOLD USE - DRY CLEANING: METHODS OF MEASURING PERFORMANCE (IEC 62929:2014) |
17/30286850 DC : DRAFT SEP 2017 | BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION |
PD IEC/TR 60721-4-4:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at non-weatherprotected locations |
BS ISO 11087:2015 | Alpine ski-bindings. Retention devices. Requirements and test methods |
BS ISO 2421:2003 | Coated abrasives. Cylindrical sleeves |
BS EN 282:1997 | Avalanche beacons. Transmitter/receiver systems. Safety requirements and testing |
UNI CEN/TS 16700 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
BS ISO 10580 : 2010 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - TEST METHOD FOR VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS |
ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
04/30109552 DC : DRAFT FEB 2004 | ISO 16000-9 - INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - EMISSION TEST CHAMBER METHOD |
I.S. EN 1723:2000 | LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS |
UNE-EN 62826:2015 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance |
97/713394 DC : DRAFT AUG 1997 | PREN 4365 - AEROSPACE STANDARD - HEAT AND CRAZING RESISTANT ACRYLIC - CAST AND CROSS LINKED - LOW MOISTURE ABSORPTION - PROPERTIES |
BS 2782-0:1982 | Methods of testing plastics Introduction |
I.S. EN 62826:2014 | SURFACE CLEANING APPLIANCES - FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE - METHODS OF MEASURING THE PERFORMANCE |
BS EN 27813:1992 | Identification cards. Financial transaction cards |
UNE-EN ISO 9012:2012 | Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2008) |
ISO 17554:2014 | Reaction to fire tests Mass loss measurement |
07/30161895 DC : 0 | BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
06/30116005 DC : DRAFT MAY 2006 | ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS |
UNI EN ISO 9012 : 2011 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS |
XP P84 523 : 2008 XP | GEOMEMBRANES - GEOMEMBRANES LINING SYSTEM - DETERMINATION OF THE INDENTATION RESISTANCE UNDER HYDROSTATIC LOAD |
BS 7108:1990 | Guide to design and use of identification cards as financial transaction cards |
BS ISO 16840-3:2014 | Wheelchair seating Determination of static, impact and repetitive load strengths for postural support devices |
09/30205415 DC : 0 | BS EN 60312-1 ED 1.0 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1: DRY VACUUM - METHODS FOR MEASURING PERFORMANCE |
17/30364312 DC : 0 | BS EN 927-10 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
I.S. EN ISO 7785-1:1999 | DENTAL HANDPIECES - PART 1: HIGH-SPEED AIR TURBINE HANDPIECES |
I.S. EN ISO 11498:1999 | DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRICAL MOTORS |
PD IEC TR 60721-4-7:2001 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Portable and non-stationary use |
I.S. EN ISO 16000-10:2006 | INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CELL METHOD |
ISO 9848:2003 | Photography Source document microfilms Determination of ISO speed and ISO average gradient |
12/30254319 DC : 0 | BS ISO 15739 - PHOTOGRAPHY - ELECTRONIC STILL-PICTURE IMAGING - NOISE MEASUREMENTS |
11/30247568 DC : 0 | BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
BS ISO 7187:1995 | Photography. Materials for direct-positive colour-print cameras. Determination of ISO speed |
BS EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
BS ISO 11498 : 1997 AMD 10705 | DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRIC MOTORS |
BS EN 16402:2013 | Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing |
01/122049 DC : DRAFT MAY 2001 | ISO/DIS 9073-10 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 10: LINT AND OTHER PARTICLES GENERATION IN THE DRY STATE |
DIN ISO 16000-25:2012-01 | Indoor air - Part 25: Determination of the emission of semi-volatile organic compounds by building products - Micro-chamber method (ISO 16000-25:2011) |
BS ISO 14535:2001 | Photography. Room-light loading packages for electronic scanners and image-setting film and paper rolls. Dimensions and related requirements |
BS ISO 1099:2017 | Metallic materials. Fatigue testing. Axial force-controlled method |
ASTM F 2546 : 2007 : R2012 | Standard Test Method for Snowboard Step-in Bindings |
CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
BS EN 15646:2009 | Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods |
ISO 16287:2005 | Plain bearings Thermoplastic bushes Dimensions and tolerances |
PD ISO/TS 5660-3:2012 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Guidance on measurement |
ISO 6148:2001 | Photography — Micrographic films, spools and cores — Dimensions |
BS 3483-0:1990 | Methods for testing pigments for paints General introduction |
PREN 12226 : DRAFT 2010 | GEOSYNTHETICS - GENERAL TESTS FOR EVALUATION FOLLOWING DURABILITY TESTING |
15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
ISO 13785-1:2002 | Reaction-to-fire tests for façades — Part 1: Intermediate-scale test |
03/312217 DC : DRAFT AUG 2003 | ISO 16067-2 - PHOTOGRAPHY - ELECTRONIC SCANNERS FOR PHOTOGRAPHIC IMAGES - SPATIAL RESOLUTION MEASUREMENTS - PART 2: FILM SCANNERS |
BS EN ISO 3665:2013 | Photography. Intra-oral dental radiographic film and film packets. Manufacturer specifications |
INCITS/ISO/IEC 11159 : 1996 : R2004 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
BS EN 16516:2017 | Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air |
BS ISO 732:2000 | Photography. 120-size and 220-size films. Dimensions |
BS ISO 4090:1991 | Photography. Film dimensions. Medical radiography |
12/30242499 DC : DRAFT MAR 2012 | BS ISO 16525-2 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 2: DETERMINATION OF ELECTRICAL CHARACTERISTICS |
BS ISO 11416:1995 | Tennis rackets. Racket components and physical parameters |
DIN ISO 1012:2000-04 | PHOTOGRAPHY - FILM IN SHEETS AND ROLLS FOR GENERAL USE - DIMENSIONS |
DIN EN 15816:2011-06 | Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain |
DIN ISO 2421:2004-07 | Coated abrasives - Cylindrical sleeves (ISO 2421:2003) |
BS 5817-20:1989 | Specification for audiovisual, video and television equipment and systems Methods of measuring and reporting the performance of 16 mm sound film projectors |
PD 6633:1998 | Gas welding equipment. Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes |
BS ISO 11312:2000 | Photography. Sheets of sensitized material for the pre-press industry. Dimensions and related requirements |
03/106014 DC : DRAFT MAR 2003 | ISO 6106 - ABRASIVE PRODUCTS - CHECKING THE GRIT SIZE OF SUPERABRASIVES |
S.R. CEN/TS 16700:2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
NF EN 15818 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF DIMENSIONAL STABILITY AT HIGH TEMPERATURE |
04/19976241 DC : DRAFT AUG 2004 | |
UNI CEN/TS 16498 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF TANNIN STAINING |
UNI CEN/TS 14417 : 2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
04/30096361 DC : DRAFT APR 2004 | ISO/DIS 15242-3 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL DOUBLE-ROW SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE |
11/30234858 DC : DRAFT APR 2011 | BS ISO 3434 - SHIPBUILDING AND MARINE STRUCTURES - HEATED GLASS PANES FOR SHIPS' RECTANGULAR WINDOWS |
13/30238910 DC : 0 | BS EN ISO 13427 - GEOSYNTHETICS - ABRASION DAMAGE SIMULATION (SLIDING BLOCK TEST) |
14/30296759 DC : 0 | BS EN 1903 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
CSA Z10524 : 2002 | PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR MEDICAL GAS SYSTEMS |
UNI EN ISO 9539 : 2014 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
02/565097 DC : DRAFT DEC 2002 | BS ISO 17398 - SAFETY COLOURS AND SAFETY SIGNS - DURABILITY OF SAFETY SIGNS |
NF EN 15816 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN |
UNE-EN ISO 10580:2012 | Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010) |
BS ISO 21951:2001 | Coated abrasives. Plain discs with holes for dust extraction |
BS EN 15816:2011 | Polymer modified bituminous thick coatings for waterproofing. Resistance to rain |
DIN EN ISO 12836:2015-11 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
BS EN 14151:2010 | Geosynthetics. Determination of burst strength |
BS EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing. Reduction of the thickness of the layer when fully dried |
PD IEC/TR 60721-4-1:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Storage |
CEI EN 60312 : 2008 | VACUUM CLEANERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
11/30247565 DC : 0 | BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
DD ENV 13419-1:1999 | Building products. Determination of the emission of volatile organic compounds Emission test chamber method |
04/30115299 DC : DRAFT JUN 2004 | ISO/DIS 5172 - GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS |
ASTM F 2495 : 2005 | Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment |
08/30171147 DC : DRAFT JULY 2008 | BS ISO 16000-24 - INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUNDS AND CARBONYL COMPOUNDS WITHOUT FORMALDEHYDE CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
02/564963 DC : DRAFT NOV 2002 | EN 13419-2 - BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 2: EMISSION TEST CELL METHOD |
BS ISO 9848:2003 | Photography. Source document microfilms. Determination of ISO speed and ISO average gradient |
I.S. EN ISO 10722:2007 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
04/30123591 DC : DRAFT OCT 2004 | EN 15062 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
03/105707 DC : DRAFT MAR 2003 | BS EN ISO 21530 - DENTISTRY - DETERMINATION OF RESISTANCE TO CHEMICAL DISINFECTANTS OF MATERIALS USED FOR DENTAL EQUIPMENT SURFACES |
BS ISO 3366:1999 | Coated abrasives. Abrasive rolls |
BS EN ISO 25619-2:2015 | Geosynthetics. Determination of compression behaviour Determination of short-term compression behaviour |
PREN 4365 : 200P1 | AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, AND LOW MOISTURE ABSORPTION - PROPERTIES |
ISO 13450:1996 | Photography 110-size cartridge, film and backing paper Dimensions |
UNI ISO 5598 : 2012 | FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
PREN 3095 : 200P1 | AEROSPACE SERIES - SEALANTS - TEST METHODS - DETERMINATION OF EXTENDED ASSEMBLY TIME |
PREN 13719 : DRAFT 2014 | GEOSYNTHETICS - DETERMINATION OF THE LONG TERM PROTECTION EFFICIENCY OF GEOSYNTHETICS IN CONTACT WITH GEOSYNTHETIC BARRIERS |
UNI EN 15815 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION |
ISO 18454:2018 | Footwear — Standard atmospheres for conditioning and testing of footwear and components for footwear |
IEC TR 60721-4-5:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ground vehicle installations |
ISO 732:2000 | Photography 120-size and 220-size films Dimensions |
ISO 3800:1993 | Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results |
ISO 1007:2000 | Photography 135-size film and magazine Specifications |
BS EN ISO 9539 : 2010 | GAS WELDING EQUIPMENT- MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
I.S. EN 14151:2010 | GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
I.S. EN 62849:2016 | PERFORMANCE EVALUATION METHODS OF MOBILE HOUSEHOLD ROBOTS |
ISO 7176-16:2012 | Wheelchairs Part 16: Resistance to ignition of postural support devices |
I.S. EN 15818:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF DIMENSIONAL STABILITY AT HIGH TEMPERATURE |
ISO 16067-1:2003 | Photography Spatial resolution measurements of electronic scanners for photographic images Part 1: Scanners for reflective media |
ISO 21581:2010 | Timber structures - Static and cyclic lateral load test methods for shear walls |
ISO 21951:2001 | Coated abrasives Plain discs with holes for dust extraction |
EN ISO 5175-1 : 2017 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 1: DEVICES INCORPORATING A FLAME (FLASHBACK) ARRESTOR (ISO 5175-1:2017) |
ISO 8127-1:1989 | Micrographics — A6 size microfilm jackets — Part 1: Five channel jacket for 16 mm microfilm |
NF ISO 16000-24 : 2010 | INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUNDS (EXCEPT FORMALDEHYDE) CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
ISO 16670:2003 | Timber structures Joints made with mechanical fasteners Quasi-static reversed-cyclic test method |
NF ISO 16000-23 : 2010 | INDOOR AIR - PART 23: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF FORMALDEHYDE CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
BS ISO 7176-16:2012 | Wheelchairs Resistance to ignition of postural support devices |
I.S. EN 15812:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
ISO 3434:2012 | Ships and marine technology — Heated glass panes for ships' rectangular windows |
UNE-EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
ISO/IEC TR 24705:2005 | Information technology Office machines Machines for colour image reproduction Method of specifying image reproduction of colour devices by digital and analog test charts |
ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
ISO/IEC 28360:2015 | Information technology Office equipment Determination of chemical emission rates from electronic equipment |
NF ISO 7331 : 2011 | SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
UNI CEN/TS 16499 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
ASTM F 2494 : 2005 | Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment |
NF EN ISO 9012 : 2011 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS |
DIN EN ISO 12944-6:1998-07 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS |
BS EN ISO 13426-1:2003 | Geotextiles and geotextile-related products. Strength of internal structural junctions Geocells |
EN ISO 5175-2 : 2017 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 2: NOT INCORPORATING A FLAME (FLASHBACK) ARRESTOR (ISO 5175-2:2017) |
EN 927-6:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
I.S. EN ISO 12957-1:2005 | GEOSYNTHETICS - DETERMINATION OF FRICTION CHARACTERISTICS - PART 1: DIRECT SHEAR TEST |
NF EN ISO 5912 : 2011 | CAMPING TENTS |
I.S. EN ISO 13426-1:2003 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
ISO 14535:2001 | Photography Room-light loading packages for electronic scanners and image-setting film and paper rolls Dimensions and related requirements |
ISO 14524:2009 | Photography Electronic still-picture cameras Methods for measuring opto-electronic conversion functions (OECFs) |
DIN EN 13200-4:2006-12 | Spectator facilities - Part 4: Seats - Product characteristics |
DIN EN ISO 7291:2015-12 | Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010 + Amd 1:2015) (includes Amendment :2015) |
DIN EN 1392:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
DIN EN 927-3:2012-10 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
DIN EN 15272-2:2007-06 | Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead; German version EN 15272-2:2007 |
DIN EN 14574:2015-06 | GEOSYNTHETICS - DETERMINATION OF THE PYRAMID PUNCTURE RESISTANCE OF SUPPORTED GEOSYNTHETICS |
DIN ISO 15242-1:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS (ISO 15242-1:2004) |
UNE-EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
BS EN 12222:1997 | Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear |
BS EN 1902:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear creep test |
ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
BS EN ISO 13294:1997 | Dental handpieces. Dental air-motors |
BS EN ISO 4090:2004 | Photography. Medical radiographic cassettes/screens/films and hard-copy imaging films. Dimensions and specifications |
ISO 13426-1:2003 | Geotextiles and geotextile-related products Strength of internal structural junctions Part 1: Geocells |
ISO 15711:2003 | Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water |
ISO 15242-1:2015 | Rolling bearings Measuring methods for vibration Part 1: Fundamentals |
ISO 13426-2:2005 | Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites |
ISO 11143:2008 | Dentistry Amalgam separators |
UNE-EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
BS EN 1244:1998 | Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light |
ISO/IEC 11159:1996 | Information technology — Office equipment — Minimum information to be included in specification sheets — Copying machines |
BS EN ISO 5912:2011 | Camping tents |
BS EN 15307:2014 | Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
UNE-EN 13238:2011 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
EN 62929:2014 | Cleaning robots for household use - Dry cleaning: Methods of measuring performance |
I.S. EN 13238:2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
EN ISO 25619-1:2008 | Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008) |
DIN EN 1902:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
I.S. EN ISO/IEC 11159:1998 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
DIN ISO 9523:2016-05 | TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS (ISO 9523:2015) |
I.S. EN 13483:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
DIN EN ISO 12957-2:2005-05 | Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005); German version EN ISO 12957-2:2005 |
DIN EN 738-1:2002-07 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES |
I.S. EN ISO 11143:2008 | DENTISTRY - AMALGAM SEPARATORS |
I.S. EN 13743:2017 | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
I.S. EN 927-5:2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 5: ASSESSMENT OF THE LIQUID WATER PERMEABILITY |
ONORM ISO 5355 : 2006 | ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
DIN EN ISO 10722:2007-08 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
I.S. EN 14574:2015 | GEOSYNTHETICS - DETERMINATION OF THE PYRAMID PUNCTURE RESISTANCE OF SUPPORTED GEOSYNTHETICS |
I.S. EN ISO 7291:2010 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS FOR MANIFOLD SYSTEMS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 30 MPA (300 BAR) (ISO 7291:2010) |
I.S. EN ISO 10062:2008 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERE AT VERY LOW CONCENTRATIONS OF POLLUTING GAS(ES) |
DIN EN 1903:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
I.S. EN 1392:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
DIN EN 1897:2002-02 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE COMPRESSIVE CREEP PROPERTIES |
DIN EN ISO 12957-1:2005-05 | GEOSYNTHETICS - DETERMINATION OF FRICTION CHARACTERISTICS - PART 1: DIRECT SHEAR TEST |
I.S. EN 15307:2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
I.S. EN ISO 10319:2015 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
I.S. EN ISO 12236:2006 | GEOSYNTHETICS - STATIC PUNCTURE TEST (CBR TEST) |
I.S. EN 1263-1:2014 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
DIN EN 737-1:1998-02 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
I.S. EN 1360:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
DIN EN 13238:2010-06 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
I.S. EN 13999-1:2013 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
I.S. EN ISO 5172:2006 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS (ISO 5172:2006) |
I.S. EN 14293:2006 | ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
I.S. EN 1902:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
I.S. EN ISO 2503:2009 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR (30 MPA) (ISO 2503:2009) |
I.S. EN ISO 13427:2014 | GEOSYNTHETICS - ABRASION DAMAGE SIMULATION (SLIDING BLOCK TEST) (ISO 13427:2014) |
I.S. EN 13851:2003 | METHODS OF TEST FOR HYDRAULIC SETTING FLOOR SMOOTHING AND/OR LEVELLING COMPOUNDS - DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
I.S. EN 927-4:2000 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 4: ASSESSMENT OF THE WATER-VAPOUR PERMEABILITY |
ASME B5.57 : 2012 | METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
ONORM EN 13483 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
BS 2782-0:1992 | Methods of testing plastics Introduction |
BS 5550-2.1.1:1993 | Cinematography. 16 mm film. Raw stock Specification for the cutting and perforating dimensions of 16 mm motion-picture film and magnetic film |
ASME B5.57 : 2012 : R2017 | METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
15/30323803 DC : 0 | BS ISO 12505-2 - SKIN BARRIER FOR OSTOMY AIDS - TEST METHODS - PART 2: WET-INTEGRITY AND ADHESIVE STRENGTH |
ECMA 328 : 8ED 2017 | DETERMINATION OF CHEMICAL EMISSION RATES FROM ELECTRONIC EQUIPMENT - PART 1 (USING-CONSUMABLES) AND PART 2 (NOT USING-CONSUMABLES) |
ISO 1012:1998 | Photography Films in sheets and rolls for general use Dimensions |
BS ISO/TR 14697:1997 | Fire tests. Guidance on the choice of substrates for building products |
ISO 3772:2000 | Photography Rolls of sensitized material for the pre-press industry Dimensions and related requirements |
BS ISO 6846:1992 | Photography. Black and white continuous tone papers. Determination of ISO speed and ISO range for printing |
17/30343039 DC : 0 | BS ISO 16000-24 - INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUND CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
S.R. CEN/TS 14417:2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
AIIM MS5 : 0 | MICROFICHE |
13/30246099 DC : 0 | BS ISO 17094 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT |
I.S. EN ISO 16000-9:2006 | INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD |
I.S. EN 15820:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF WATERTIGHTNESS |
08/30166507 DC : DRAFT OCT 2008 | BS ISO 10580 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS TEST METHOD FOR EMISSIONS OF VOLATILE ORGANIC COMPOUNDS (VOC) |
10/30216098 DC : 0 | BS ISO 3665 - PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS |
UNI EN 14151 : 2010 | GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
UNI EN ISO 3665 : 2013 | PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS |
ISO 8366:1987 | Coated abrasive products Dimensional tolerances on non-standard conversions |
07/30162228 DC : 0 | BS ISO 14524 - PHOTOGRAPHY - ELECTRONIC STILL-PICTURE CAMERAS - METHODS FOR MEASURING OPTO-ELECTRONIC CONVERSION FUNCTIONS (OECFS) |
97/713393 DC : DRAFT AUG 1997 | PREN 4364 - AEROSPACE STANDARD - CAST (PMMA) ACRYLIC - PROPERTIES |
03/101690 DC : 0 | ISO 11087 - ALPINE SKI-BINDINGS - RETENTION DEVICES - SAFETY REQUIREMENTS AND TEST METHODS |
04/30106626 DC : DRAFT APR 2004 | BS ISO 21181 - LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS |
01/124426 DC : 0 | ISO/CD 21367 - PLASTICS - REACTION TO FIRE - TEST METHOD FOR FLAME SPREAD AND COMBUSTION PRODUCT RELEASE FROM VERTICALLY ORIENTATED SPECIMENS |
CEI EN 62849 : 1ED 2017 | PERFORMANCE EVALUATION METHODS OF MOBILE HOUSEHOLD ROBOTS |
10/30175254 DC : 0 | BS ISO 5912 - CAMPING TENTS |
UNE-EN 15813:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures |
ISO/TS 19708:2007 | Geosynthetics Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
05/30098700 DC : DRAFT JUL 2005 | ISO 9680 - DENTAL OPERATING LIGHT |
98/101455 DC : DRAFT FEB 1998 | PREN ISO 12957-1:1998 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE FRICTION CHARACTERISTICS - PART 1: DIRECT SHEAR TEST |
PD IEC/TR 60721-4-2:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation |
07/30154260 DC : 0 | BS ISO 23848-1 - MACHINE TOOLS - BALL SPLINES - PART 1: CLASSIFICATION AND GEOMETRICAL REQUIREMENTS |
I.S. EN 730-1:2002 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 1: INCORPORATING A FLAME (FLASHBACK) ARRESTOR |
14/30295044 DC : 0 | BS ISO 19095-3 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 3: TEST METHODS |
BS 7007-5:1994 | Abrasive products Specification for dimensions, tolerances and designation of abrasive belts |
01/709336 DC : DRAFT JUN 2001 | ISO 732 - PHOTOGRAPHY - 120-SIZE AND 220-SIZE FILMS - DIMENSIONS |
I.S. EN 1637:1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE MEASUREMENT OF THE ELECTRICAL RESISTANCES |
14/30296753 DC : 0 | BS EN 1372 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
DIN ISO 5912 E : 2004 | CAMPING TENTS |
02/713184 DC : DRAFT NOV 2002 | ISO 1099 - METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE CONTROLLED METHOD |
BS ISO 13450:1996 | Photography. 110-size cartridge, film and backing paper. Dimensions |
04/30123559 DC : DRAFT OCT 2004 | EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS |
DIN ISO 69:1999-04 | Cinematography - 16 mm motion-picture and magnetic film - Cutting and perforating dimensions (ISO 69:1998) |
05/30137735 DC : DRAFT AUG 2005 | ISO 22264 - TELEMARK SKI-BOOTS FOR ADULTS - INTERFACE WITH TELEMARK SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
04/30109558 DC : DRAFT FEB 2004 | ISO 16000-10 - INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - EMISSION TEST CELL METHOD |
DIN EN 1360:2013-09 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
06/30065723 DC : DRAFT JUN 2006 | ISO 10321 - GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH METHOD |
BS EN 15815:2011 | Polymer modified bituminous thick coatings for waterproofing. Resistance to compression |
ISO 5655:2000 | Photography Industrial radiographic films (roll and sheet) and metal intensifying screens Dimensions |
03/115041 DC : DRAFT SEP 2003 | ISO/DIS 17431 - FIRE TEST - REDUCED-SCALE MODEL BOX TEST |
NF ISO 21367 : 2008 | PLASTICS - REACTION TO FIRE - TEST METHOD FOR FLAME SPREAD AND COMBUSTION PRODUCT RELEASE FROM VERTICALLY ORIENTED SPECIMENS |
08/30166877 DC : DRAFT FEB 2008 | BS ISO 27447 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS |
BS ISO 1012:1998 | Photography. Films in sheets and rolls for general use. Dimensions |
10/30197665 DC : 0 | BS ISO 16000-28 - INDOOR AIR - PART 28: DETERMINATION OF ODOUR EMISSIONS FROM BUILDING PRODUCTS USING TEST CHAMBERS |
97/713388 DC : DRAFT AUG 1997 | PREN 2719 - AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION |
PD ISO/TS 5660-4:2016 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Measurement of low levels of heat release |
BS ISO 1008:1992 | Photography. Paper dimensions. Pictorial sheets |
BS ISO 9236-3:1999 | Photography. Sensitometry of screen/film systems for medical radiography Determination of sensitometric curve shape, speed and average gradient for mammography |
92/76588 DC : DRAFT JUN 1992 | ISO/DIS 9960-2 - DRAUGHTING INSTRUMENTS WITH OR WITHOUT GRADUATION - PART 2: PROTRACTORS |
BS ISO 16067-2:2004 | Photography. Electronic scanners for photographic images. Spatial resolution measurements Film scanners |
BS 7329:1990 | Specification for materials for equipment used in gas welding, cutting and allied processes |
97/710376 DC : 0 | PREN 3095 - AEROSPACE SERIES - TEST METHODS FOR SEALANTS - DETERMINATION OF EXTENDED ASSEMBLY TIME |
14/30301877 DC : 0 | BS EN 13719 - GEOSYNTHETICS - DETERMINATION OF THE LONG TERM PROTECTION EFFICIENCY OF GEOSYNTHETICS IN CONTACT WITH GEOSYNTHETIC BARRIERS |
BS ISO 3665 : 2011 | PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS |
DIN EN 15815:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Resistance to compression |
BS ISO 11894-1:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics Oxide-ion-conducting solid electrolytes |
DIN EN 15812:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
I.S. EN 60312-1:2017 | VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1: DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
DIN EN 15817:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Water resistance |
BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
DIN 58648-4:1991-11 | RESPIRATORY EQUIPMENT; COMPRESSED AIR LINE BREATHING APPARATUS IN LIGHT DUTY CONSTRUCTION (LIGHT DUTY COMPRESSED AIR LINE BREATHING APPARATUS); SAFETY REQUIREMENTS, TESTING, MARKING |
13/30280551 DC : 0 | BS ISO 16840-6 - WHEELCHAIR SEATING - PART 6: SIMULATED USE AND DETERMINATION OF THE CHANGES IN PROPERTIES - SEAT CUSHIONS |
DD ENV 13999-1:2001 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
17/30355404 DC : 0 | BS IEC 62885-5 ED.1.0 - SURFACE CLEANING APPLIANCES - PART 5: HIGH PRESSURE CLEANERS AND STEAM CLEANERS - METHODS OF MEASURING THE PERFORMANCE |
DIN EN 14151:2010-11 | Geosynthetics - Determination of burst strength |
11/30236369 DC : 0 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER |
12/30274859 DC : 0 | BS ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
BS ISO 16287:2005 | Plain bearings. Thermoplastic bushes. Dimensions and tolerances |
BS ISO 16525-2:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of electrical characteristics for use in electronic assemblies |
BS ISO 28620:2010 | Medical devices. Non-electrically driven portable infusion devices |
DIN EN ISO 10773:2011-08 | Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011) |
BS ISO/IEC 15457-3:2008 | Identification cards. Thin flexible cards Test methods |
FD CR 13259 : 99 FD | GAS WELDING EQUIPMENT - INDUSTRIAL MANUAL AND MACHINE OXYGEN-FUEL GASES BLOWPIPES FOR FLAME HEATING AND ALLIED PROCESSES |
BS EN 62826:2014 | Surface cleaning appliances. Floor treatment machines with or without traction drive, for commercial use. Methods of measuring the performance |
09/30192433 DC : 0 | BS ISO 21581 - TIMBER STRUCTURES - STATIC AND CYCLIC LATERAL LOAD TEST METHOD FOR SHEAR WALLS |
02/706173 DC : DRAFT JUN 2002 | ISO/CD 21550 - PHOTOGRAPHY - ELECTRONIC SCANNERS FOR PHOTOGRAPHIC IMAGES - DYNAMIC RANGE MEASUREMENTS |
04/30098104 DC : DRAFT JUL 2004 | ISO 12232 - PHOTOGRAPHY - DIGITAL STILL CAMERAS - DETERMINATION OF EXPOSURE INDEX, ISO SPEED RATINGS, STANDARD OUTPUT SENSITIVITY, AND RECOMMENDED EXPOSURE INDEX |
17/30316733 DC : 0 | BS ISO 16696-1 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - PART 1: COMPONENT PERFORMANCE AND PRODUCTION REQUIREMENTS |
17/30343036 DC : 0 | BS ISO 16000-23 - INDOOR AIR - PART 23: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF FORMALDEHYDE AND OTHER CARBONYL COMPOUNDS CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
BS EN ISO 8362-5:2016 | Injection containers and accessories Freeze drying closures for injection vials |
UNE-EN 15817:2011 | Polymer modified bituminous thick coatings for waterproofing - Water resistance |
BS ISO 5800:1987 | Photography. Colour negative films for still photography. Determination of ISO speed |
03/317167 DC : DRAFT OCT 2003 | ISO 16287 - PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES |
12/30272385 DC : 0 | BS EN 1263-1 - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
11/30216844 DC : 0 | BS ISO 6106 - ABRASIVE PRODUCTS - CHECKING THE GRIT SIZE OF SUPERABRASIVES |
09/30175165 DC : 0 | BS EN ISO 10773 - CLAY-GEOSYNTHETIC BARRIERS - DETERMINATION OF PERMEABILITY TO GASES |
13/30256250 DC : 0 | BS EN 60312-1-1 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1-1: CORDLESS DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
BS EN ISO 9012:2011 | Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests |
11/30199626 DC : 0 | BS ISO 11894-1 - FINE CERAMIC (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CONDUCTIVITY MEASUREMENT OF ION-CONDUCTIVE FINE CERAMICS - PART 1: OXIDE-ION-CONDUCTING SOLID ELECTROLYTES |
BS ISO 6148:2001 | Photography. Micrographic films, spools and cores. Dimensions |
99/109104 DC : DRAFT NOV 1999 | BS EN 13729 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE LONG TERM PROTECTION EFFICIENCY OF GEOTEXTILES IN CONTACT WITH GEOMEMBRANES |
03/106018 DC : DRAFT APR 2003 | ISO 2976 - COATED ABRASIVES - ABRASIVE BELTS - SELECTION OF WIDTH/LENGTH COMBINATIONS |
97/711340 DC : DRAFT JUL 1997 | ISO/CD 5598 - FLUID POWER SYSTEMS - TERMINOLOGY, CLASSIFICATION AND SYMBOLS |
03/317861 DC : DRAFT OCT 2003 | EN ISO 22523 - EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
BS ISO 23848-1:2009 | Machine tools. Ball splines General characteristics and requirements |
14/30293503 DC : 0 | BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
UNI EN 15646 : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
IEC 60312-1:2010+AMD1:2011 CSV | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
02/106426 DC : DRAFT NOV 2002 | PREN 14574 - GEOSYNTHETICS - DETERMINATION OF THE PYRAMID PUNCTURE RESISTANCE OF SUPPORTED GEOSYNTHETICS |
UNE-EN 62849:2017 | Performance evaluation methods of mobile household robots |
BS ISO 5655:2000 | Photography. Industrial radiographic films (roll and sheet) and metal intensifying screens. Dimensions |
BS ISO 14524:2009 | Photography. Electronic still-picture Cameras. Methods for measuring optoelectronic conversion functions (OECFs) |
BS ISO 21550:2004 | Photography. Electronic scanners for photographic images. Dynamic range measurements |
UNE-ISO 23848-1:2013 | Machine tools -- Ball splines -- Part 1: General characteristics and requirements |
UNI EN 15817 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - WATER RESISTANCE |
NF EN 14151 : 2010 | GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
ISO 4324:1977 | Surface active agents — Powders and granules — Measurement of the angle of repose |
I.S. EN 27813:1993 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
ISO 1352:2011 | Metallic materials Torque-controlled fatigue testing |
PREN 3624 : 200P1 | AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
ISO 2240:2003 | Photography Colour reversal camera films Determination of ISO speed |
ISO 18560-1:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment Part 1: Removal of formaldehyde |
I.S. EN ISO 5175-1:2017 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 1: DEVICES INCORPORATING A FLAME (FLASHBACK) ARRESTOR (ISO 5175-1:2017) |
NF EN 15819 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - REDUCTION OF THE THICKNESS OF THE LAYER WHEN FULLY DRIED |
UNI EN ISO 25619-1 : 2009 | GEO-SYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
S.R. CEN/TS 16498:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF TANNIN STAINING |
UNE-EN ISO 3665:2013 | Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011) |
UNE-EN 62885-3:2015 | Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance |
UNE-EN 62929:2014 | Cleaning robots for household use - Dry cleaning: Methods of measuring performance |
ISO 491:2002 | Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions |
ONORM EN 927-6 : 2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
ISA TR52.00.01 : 2006 | RECOMMENDED ENVIRONMENTS FOR STANDARDS LABORATORIES |
ISO 9236-1:2004 | Photography Sensitometry of screen/film systems for medical radiography Part 1: Determination of sensitometric curve shape, speed and average gradient |
ISO 11659-3:2004 | Textile machinery and accessories Machine parts in contact with textile processing oils Part 3: Determination of the impact on lacquers |
UNI EN 15818 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF DIMENSIONAL STABILITY AT HIGH TEMPERATURE |
DIN ISO 15242-3:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-3:2006 + COR. 1:2010) |
UNI EN ISO 10722 : 2007 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
I.S. EN 50375:2002 | TESTING METHODOLOGY FOR WIPERS USED IN ELECTRICAL INSULATING OIL |
UNE-EN ISO 25619-2:2015 | Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015) |
IEC TR 60721-4-4:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations |
DD ENV 13419-2:1999 | Building products. Determination of the emission of volatile organic compounds Emission test cell method |
ISO 5598:2008 | Fluid power systems and components Vocabulary |
BS 6427-1:1983 | Conditioning of sacks for testing. Method for conditioning paper sacks |
PREN 1263-1 : DRAFT 2012 | SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
UNI CEN/TS 14418 : 2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
ISO 5355:2005 | Alpine ski-boots Requirements and test methods |
NF ISO 16000-25 : 2011 | INDOOR AIR - PART 25: DETERMINATION OF THE EMISSION OF SEMI-VOLATILE ORGANIC COMPOUNDS FOR BUILDING PRODUCTS - MICRO-CHAMBER METHOD |
I.S. EN 16416:2013 | GEOSYNTHETIC CLAY BARRIERS - DETERMINATION OF WATER FLUX INDEX - FLEXIBLE WALL PERMEAMETER METHOD AT CONSTANT HEAD |
XP G38 030 : 2008 XP | GEOTEXTILES - DETERMINATION OF THE NUMBER OF CONSTRICTIONS |
ISO 16840-10:2014 | Wheelchairs Resistance to ignition of non-integrated seat and back support cushions Part 10: Requirements and test methods |
ISO/TS 5660-3:2012 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement |
ISO 23848-1:2009 | Machine tools Ball splines Part 1: General characteristics and requirements |
ISO 18055-1:2004 | Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film) |
ISO 21948:2001 | Coated abrasives Plain sheets |
EN 16402:2013 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
ISO 16000-24:2009 | Indoor air Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials |
ISO 21367:2007 | Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens |
I.S. EN ISO 10773:2011 | CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF PERMEABILITY TO GASES |
IEC TR 60721-4-1:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage |
IEC TR 60721-4-2:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation |
ISO 21949:2001 | Coated abrasives Plain sheets with holes for dust extraction |
IEC 60312-2:2010 | Vacuum cleaners for household use - Part 2: Wet cleaning appliances - Methods of measuring the performance |
ISO 6106:2013 | Abrasive products — Checking the grain size of superabrasives |
NF EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
NF EN 1841 : 1999 | ADHESIVES - TEST METHODS FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES OF A LINOLEUM FLOOR COVERING IN CONTACT WITH AN ADHESIVE |
EN ISO 12236:2006 | Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
DIN EN 927-5:2007-03 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability |
DIN EN 1372:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
DIN EN ISO 22523:2007-04 | External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:2006) |
DIN EN 1373:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
DIN EN 13743:2016-01 (Draft) | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
UNE-EN ISO 7291:2011 | Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010) |
ISO 9523:2015 | Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods |
BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
ISO 9863-2:1996 | Geotextiles and geotextile-related products Determination of thickness at specified pressures Part 2: Procedure for determination of thickness of single layers of multilayer products |
BS EN ISO 13431:1999 | Geotextiles and geotextiles-related products. Determination of tensile creep and creep rupture behaviour |
ISO 10580:2010 | Resilient, textile and laminate floor coverings Test method for volatile organic compound (VOC) emissions |
BS EN 737-4:1998 | Medical gas pipeline systems Terminal units for anaesthetic gas scavenging systems |
BS EN 14591-2:2007 | Explosion prevention and protection in underground mines. Protective systems Passive water trough barriers |
ISO 13433:2006 | Geosynthetics — Dynamic perforation test (cone drop test) |
ISO 12957-2:2005 | Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test |
BS EN 1722:1999 | Light conveyor belts. Test method for the determination of the maximum tensile strength |
BS EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Application of repair mortar overhead |
ISO 13431:1999 | Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour |
ISO 9012:2008 | Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests |
UNE-EN 16416:2014 | Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head |
ISO 10062:2006 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method |
ISO 5912:2011 | Camping tents |
BS EN ISO 13428:2005 | Geosynthetics. Determination of the protection efficiency of a geosynthetic against impact damage |
BS EN 1542:1999 | Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off |
BS EN 12964:2001 | Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature |
ISO 9539:2010 | Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes |
BS EN 12523:1999 | External limb prostheses and external orthoses. Requirements and test methods |
UNE-EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
I.S. EN 14080:2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
ONORM EN ISO 5912 : 2013 | CAMPING TENTS (ISO 5912:2011) |
I.S. EN ISO 9073-10:2005 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 10: LINT AND OTHER PARTICLES GENERATION IN THE DRY STATE |
I.S. EN ISO 8502-6:2006 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD |
ONORM EN ISO 8502-6 : 2006 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD |
EN ISO 12957-1:2005 | GEOSYNTHETICS - DETERMINATION OF FRICTION CHARACTERISTICS - PART 1: DIRECT SHEAR TEST |
UNE-EN 927-3:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
I.S. EN 1841:1999 | ADHESIVES - TEST METHODS FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES OF A LINOLEUM FLOOR COVERING IN CONTACT WITH AN ADHESIVE |
EN 16516:2017 | Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
EN 13743:2017 | Safety requirements for coated abrasive products |
EN ISO 9012:2011 | Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2008) |
EN ISO 9864:2005 | Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005) |
EN 26891:1991 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) |
EN 738-1:1997/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES |
EN 737-1 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
UNI EN 13999-1 : 2014 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
UNI EN ISO 10321 : 2008 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
UNI EN 16416 : 2013 | GEOSYNTHETIC CLAY BARRIERS - DETERMINATION OF WATER FLUX INDEX - FLEXIBLE WALL PERMEAMETER METHOD AT CONSTANT HEAD |
EN 15816:2011 | Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain |
UNI EN 14080 : 2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
UNI EN ISO 10062 : 2008 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERE AT VERY LOW CONCENTRATIONS OF POLLUTING GAS(ES) |
EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
UNI EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
UNI EN 1360 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
EN 13999-1:2013 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
UNI EN ISO 9239-1 : 2010 | REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
UNI EN 13483 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
UNI EN ISO 11143 : 2008 | DENTISTRY - AMALGAM SEPARATORS |
UNI EN ISO 10319 : 2008 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST |
UNI EN 13238 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
BS 4756:1998 | Specification for ready-mixed aluminium priming paints for woodwork |
DIN ISO 9236-1:2007-08 | Photography - Sensitometry of screen/film systems for medical radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient (ISO 9236-1:2004) |
12/30259194 DC : 0 | BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
DIN EN ISO 3665:2013-07 | PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS (ISO 3665:2011) |
DIN ISO 8362-5:2011-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
01/710913 DC : DRAFT JULY 2001 | ISO/DIS 15242-1 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS |
DIN ISO 4324:1983-12 | SURFACE ACTIVE AGENTS - POWDERS AND GRANULES - MEASUREMENT OF THE ANGLE OF REPOSE |
04/30106622 DC : DRAFT APR 2004 | BS ISO 21180 - LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE MAXIMUM TENSILE STRENGTH |
BS 7007-6:1994 | Abrasive products Specification for dimensions, tolerances and designation of abrasive sheets |
ISO 12505-1:2014 | Skin barrier for ostomy aids Test methods Part 1: Size, surface pH and water-absorbency |
ISO 6328:2000 | Photography Photographic materials Determination of ISO resolving power |
02/102118 DC : DRAFT MAY 2002 | BS EN ISO 13426-2 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 2: GEOCOMPOSITES |
13/30275212 DC : 0 | BS ISO 16840-3 - WHEELCHAIR SEATING - PART 3: DETERMINATION OF STATIC, IMPACT AND REPETITIVE LOAD STRENGTHS FOR POSTURAL SUPPORT DEVICES |
BS 7561(1992) : AMD 8615 | METHOD FOR CORROSION TESTS IN ARTIFICIAL ATMOSPHERES AT VERY LOW CONCENTRATIONS OF POLLUTING GAS(ES) |
I.S. EN ISO 25649-1:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
I.S. EN 15062:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
BS ISO 1352:2011 | Metallic materials. Torque-controlled fatigue testing |
ISO 16057:2002 | Coated abrasives Vulcanized fibre discs |
11/30240201 DC : 0 | BS ISO/IEC 28360 - INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - DETERMINATION OF CHEMICAL EMISSION RATES FROM ELECTRONIC EQUIPMENT |
PD ISO/TS 16840-12:2015 | Wheelchair seating Apparatus and method for cushion envelopment testing |
I.S. EN ISO 9864:2005 | GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA OF GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS |
PREN 927-6 : DRAFT 2016 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
13/30275852 DC : 0 | BS EN ISO 10319 - GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST |
I.S. EN 16402:2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
18/30372409 DC : DRAFT APR 2018 | BS EN ISO 3630-1 - DENTISTRY - ENDODONTIC INSTRUMENTS - PART 1: GENERAL REQUIREMENTS |
UNI EN 15820 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF WATERTIGHTNESS |
PD 6577:1995 | The influence of environmental conditions on the testing of textile materials |
NF ISO 5912 : 2004 | CAMPING TENTS |
14/30302228 DC : 0 | BS ISO/IEC 28360 - INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - DETERMINATION OF CHEMICAL EMISSION RATES FROM ELECTRONIC EQUIPMENT |
BS ISO/IEC 28360:2015 | Information technology. Office equipment. Determination of chemical emission rates from electronic equipment |
BS ISO 8778:2003 | Pneumatic fluid power. Standard reference atmosphere |
ISO 14546:2000 | Photography Aerial films and spools Dimensions |
02/102694 DC : DRAFT MAY 2002 | PREN 14414 - GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS |
BS ISO 16000-28:2012 | Indoor air Determination of odour emissions from building products using test chambers |
BS ISO 14807:2001 | Photography. Transmission and reflection densitometers. Method for determining performance |
PD IEC/TR 60721-4-0:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Introduction |
BS 476-15:1993 | Fire tests on building materials and structures Method for measuring the rate of heat release of products |
15/30330735 DC : 0 | BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
I.S. EN 16516:2017 | CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
NF EN 15817 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - WATER RESISTANCE |
PD IEC TR 60721-4-5:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Ground vehicle installations |
DIN ISO 16000-30:2015-05 | INDOOR AIR - PART 30: SENSORY TESTING OF INDOOR AIR (ISO 16000-30:2014) |
14/30296750 DC : 0 | BS EN 1373 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
PREN 13999-1 : DRAFT 2012 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
BS EN 60312-1:2017 | Vacuum cleaners for household use Dry vacuum cleaners. Methods for measuring the performance |
05/30137738 DC : DRAFT AUG 2005 | ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
06/30156792 DC : 0 | BS EN ISO 25619-2 - GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR |
BS 7774:1994 | Threaded fasteners. Axial load fatigue testing. Test methods and evaluation of results |
NFX 30 442 : 2008 | WASTE - LABORATORY DETERMINATION OF THE PERMEABILITY COEFFICIENT OF A SATURATED MATERIAL - PERMEABILITY TESTS USING AN OEDOMETER AT CONSTANT/VARIABLE HYDRAULIC LOAD |
BS EN ISO 10580:2012 | Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions |
14/30304354 DC : 0 | BS EN ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
BS ISO 6328:2000 | Photography. Photographic materials. Determination of ISO resolving power |
07/30152892 DC : 0 | BS EN ISO 7291 - GAS WELDING EQUIPMENT - PRESSURE REGULARS FOR MANIFOLD SYSTEMS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR |
02/564962 DC : DRAFT NOV 2002 | ENV 13419-1 - BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 1: EMISSION TEST CHAMBER METHOD |
BS ISO 11040-4:2015 | Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling |
BS ISO 12505-1:2014 | Skin barrier for ostomy aids. Test methods Size, surface pH and water-absorbency |
99/109099 DC : DRAFT NOV 1999 | BS EN 13738 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF PULLOUT RESISTANCE IN SOIL |
UNE-EN 15815:2011 | Polymer modified bituminous thick coatings for waterproofing - Resistance to compression |
08/30166803 DC : DRAFT FEB 2008 | BS EN ISO 9539 - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
I.S. EN ISO 25619-1:2009 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
DIN ISO 9960-1:1993-10 | DRAUGHTING INSTRUMENTS WITH OR WITHOUT GRADUATION - PART 1: DRAUGHTING SCALE RULES |
PD CEN/TR 13259:2013 | Gas welding equipment. Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes |
BS ISO 16067-1:2003 | Photography. Spatial resolution measurements for electronic scanners for photographic images Scanners for reflective media |
DIN ISO 7331:2011-10 | Ski-poles for alpine skiing - Requirements and test methods (ISO 7331:2011) |
02/108179 DC : DRAFT JAN 2003 | EN ISO 9863-1 - GEOSYNTHETICS - DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES - PART 1: SINGLE LAYERS |
BS EN 50375:2002 | Testing methodology for wipers used in electrical insulating oil |
UNE-EN 15820:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness |
11/30250273 DC : 0 | BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
DIN EN 16416:2013-12 | Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head |
DIN ISO 3434:2015-12 | SHIPS AND MARINE TECHNOLOGY - HEATED GLASS PANES FOR SHIPS' RECTANGULAR WINDOWS (ISO 3434:2012) |
13/30273499 DC : 0 | BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
97/713395 DC : DRAFT AUG 1997 | PREN 4366 - AEROSPACE STANDARD - HEAT AND CRAZING RESISTANT ACRYLIC - CAST, CROSSLINKED AND MULTI-AXIALLY STRETCHED - LOW MOISTURE ABSORPTION - PROPERTIES |
12/30265322 DC : DRAFT SEP 2012 | BS EN 14574 - GEOSYNTHETICS - DETERMINATION OF THE PYRAMID PUNCTURE RESISTANCE OF SUPPORTED GEOSYNTHETICS |
ISO 12575-1:2012 | Thermal insulation products — Exterior insulating systems for foundations — Part 1: Material specification |
DD ISO/TS 19708:2007 | Geosynthetics. Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
BS EN 62929:2014 | Cleaning robots for household use. Dry cleaning: Methods of measuring performance |
16/30345769 DC : 0 | BS EN 927-6 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
06/30153965 DC : DRAFT JULY 2006 | BS ISO/IEC 28630 - INFORMATION TECHNOLOGY - DETERMINATION OF CHEMICAL EMISSION RATES FROM ELECTRONIC EQUIPMENT |
BS ISO 15739:2017 | Photography. Electronic still-picture imaging. Noise measurements |
06/30065729 DC : DRAFT JUN 2006 | ISO 10319 - GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST |
DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
UNI CEN/TS 16359 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
UNI EN ISO 10773 : 2011 | CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF PERMEABILITY TO GASES |
07/30167352 DC : DRAFT AUG 2007 | BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
DIN ISO 15242-2:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-2:2004 + COR. 1:2010) |
ISO/TR 17252:2008 | Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering |
PD CEN/TS 16359:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of knot staining resistance of wood coatings |
S.R. CEN/TR 13259:2013 | GAS WELDING EQUIPMENT - INDUSTRIAL MANUAL AND MACHINE BLOWPIPES FOR FLAME HEATING, FLAME BRAZING AND ALLIED PROCESSES |
DD ISO/TS 22269:2005 | Reaction to fire tests. Fire growth. Full-scale test for stairs and stair coverings |
14/30280977 DC : 0 | BS ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY |
I.S. EN 282:1992 | AVALANCHE BEACONS - TRANSMITTER/RECEIVER SYSTEMS - SAFETY REQUIREMENTS AND TESTING |
DIN ISO 2976:2005-10 | Coated abrasives - Abrasive belts - Selection of width/length combinations (ISO 2976:2005) |
12/30259433 DC : 0 | BS EN 16416 - GEOSYNTHETIC CLAY BARRIERS - DETERMINATION OF WATER FLUX INDEX - FLEXIBLE WALL PERMEAMETER METHOD AT CONSTANT HEAD |
16/30333765 DC : DRAFT JAN 2016 | BS EN ISO 5175-1 - GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 1: INCORPORATING A FLAME (FLASHBACK) ARRESTOR |
15/30322088 DC : 0 | BS EN 16516 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
98/101458 DC : DRAFT FEB 1998 | PREN ISO 12957-2:1998 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE FRICTION CHARACTERISTICS - PART 2: INCLINED PLANE TEST |
DIN EN ISO 8362-5:2016-07 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
14/30287632 DC : 0 | BS EN ISO 12836:2012/AMD 1 - DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY |
08/30176450 DC : DRAFT JAN 2008 | BS EN ISO 27668-1 - GEL INK BALL PENS AND REFILLS - PART 1: GENERAL USE |
04/30112114 DC : DRAFT APR 2004 | ISO 10303-56 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - INTEGRATED GENERIC RESOURCE - STATE |
BS ISO 6106:2013 | Abrasive products. Checking the grain size of superabrasives |
BS ISO 21949:2001 | Coated abrasives. Plain sheets with holes for dust extraction |
NF EN ISO 9539 : 2010 AMD 1 2014 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
10/30197474 DC : 0 | BS ISO 12505 - SKIN BARRIER FOR OSTOMY AIDS - TEST METHODS |
PD CEN/TS 14418:2014 | Geosynthetic Barriers. Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers |
BS ISO 5598:2008 | Fluid power systems and components. Vocabulary |
09/30193698 DC : DRAFT JAN 2009 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED LAMINATED SOLID TIMBER - REQUIREMENTS |
ISO 21550:2004 | Photography Electronic scanners for photographic images Dynamic range measurements |
12/30242496 DC : DRAFT MAR 2012 | BS ISO 16525-1 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 1: GENERAL TEST METHODS |
NFX 30 441 : 2008 | WASTE - LABORATORY DETERMINATION OF THE PERMEABILITY COEFFICIENT OF A SATURATED MATERIAL - PERMEABILITY TESTS USING A RIGID WALL PERMEAMETER AT CONSTANT/VARIABLE HYDRAULIC HEAD |
S.R. CEN/TS 16516:2013 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
BS ISO 2976:2005 | Coated abrasives. Abrasive belts. Selection of width/length combinations |
BS ISO 18055-1:2004 | Photography and imaging. Inkjet media. Classification, nomenclature and dimensions Photo-grade media (paper and film) |
ISO 11087:2015 | Alpine ski-bindings Retention devices Requirements and test methods |
BS ISO 1007:2000 | Photography. 135-size film and magazine. Specifications |
BS ISO 17398:2004 | Safety colours and safety signs. Classification, performance and durability of safety signs |
08/30189962 DC : 0 | BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
BS ISO 2240:2003 | Photography. Colour reversal camera films. Determination of ISO speed |
FD ISO 7331 : 2006 FD | SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
BS ISO 21950:2001 | Coated abrasives. Plain discs |
UNI EN 15812 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
02/102698 DC : DRAFT MAY 2002 | PREN 14417 - GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
UNE-EN ISO 9539:2011 | Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010) |
UNI CEN/TS 16516 : 2013 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
06/30140321 DC : DRAFT JULY 2006 | ISO 15242-4 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 4: RADIAL CYLINDRICAL ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE |
CSA ISO/IEC 15457-3:09 (R2019) | Identification cards - Thin flexible cards - Part 3: Test methods (Adopted ISO/IEC 15457-3:2008, second edition, 2008-03-01) |
UNI EN 15816 : 2011 | POLYMER-MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN |
DIN EN ISO 10580:2012-04 | Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010) |
BS ISO 16000-24:2009 | Indoor air Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials |
DIN 5510-2:2009-05 | PREVENTIVE FIRE PROTECTION IN RAILWAY VEHICLES - PART 2: FIRE BEHAVIOUR AND FIRE SIDE EFFECTS OF MATERIALS AND PARTS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
BS EN ISO 1716:2010 | Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value) |
PIMA IT3.112 : 1999 | PHOTOGRAPHICALLY ACTIVE MATERIALS - METHOD FOR IDENTIFYING |
UNI EN 15649-1 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
BIS IS 15060 : 2001(R2006) | GEOTEXTILES - TENSILE TEST FOR JOINT/SEAMS BY WIDE-WIDTH METHOD |
BS EN 585:1995 | Gas welding equipment. Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 200 bar |
NF EN 15812 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
ISO 69:1998 | Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions |
I.S. EN ISO 8362-5:2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
INCITS/ISO/IEC 15404 : 2008 | INFORMATION TECHNOLOGY - OFFICE MACHINES - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - FACSIMILE EQUIPMENT |
UNI ISO 16057 : 2013 | COATED ABRASIVES - VULCANIZED FIBRE DISCS |
ISO/TS 16840-11:2014 | Wheelchair seating Part 11: Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity |
UNI EN 15813 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES |
ISO 5658-4:2001 | Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
BS EN ISO 16000-9:2006 | Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method |
ISO 17178:2013 | Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements |
DIN ISO 15242-4:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 4: RADIAL CYLINDRICAL ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-4:2007) |
ISO/TS 5660-4:2016 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release |
CEI EN 50375 : 2003 | TESTING METHODOLOGY FOR WIPERS USED IN ELECTRICAL INSULATING OIL |
ISO 5800:1987 | Photography Colour negative films for still photography Determination of ISO speed |
PREN 15307 : DRAFT 2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
PREN 1903 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
I.S. EN 15815:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION |
BS ISO 27447:2009 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials |
ASTM F 2546 : 2007 : R2018 | Standard Test Method for Snowboard Step-in Bindings |
NAPM IT2.51 : 0 | PHOTOGRAPHY - SOURCE DOCUMENT MICROFILMS DETERMINATION OF ISO SPEED AND ISO AVERAGE GRADIENT |
EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
ISO 5660-4:2008 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 4: Measurement of heat release for determination of low levels of combustibility |
ISO 1009:2000 | Photography Paper dimensions Rolls for printers |
ISO 11894-1:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes |
ISO 16000-28:2012 | Indoor air Part 28: Determination of odour emissions from building products using test chambers |
ISO 16000-23:2009 | Indoor air Part 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials |
IEC PAS 62611:2009 | Vacuum cleaners for commercial use - Methods for measuring performance |
I.S. 140-2:1987 | SCHOOL FURNITURE - PART 2: PERFORMANCE REQUIREMENTS AND TESTS FOR CHAIRS FOR SCHOOLS |
ISO 16840-2:2018 | Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
UNI EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
ISO/TS 22269:2005 | Reaction to fire tests Fire growth Full-scale test for stairs and stair coverings |
ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
I.S. EN 15819:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - REDUCTION OF THE THICKNESS OF THE LAYER WHEN FULLY DRIED |
ISO 8778:2003 | Pneumatic fluid power — Standard reference atmosphere |
IEC TR 60721-4-3:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations |
I.S. EN 15816:2011 | POLYMER-MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN |
IEC TR 60721-4-0:2002 | Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction |
DIN EN ISO 13427:2015-03 | GEOSYNTHETICS - ABRASION DAMAGE SIMULATION (SLIDING BLOCK TEST) (ISO 13427:2014) |
DIN EN 13872:2004-04 | Method of test for smoothing and/or levelling compounds - Determination of shrinkage |
DIN EN 14080:2013-09 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
DIN EN 1263-1:2015-03 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
DIN EN ISO 12236:2006-11 | Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
DIN EN ISO 2503:2015-12 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR (30 MPA) (ISO 2503:2009 + AMD 1:2015) |
BS EN 14293:2006 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
BS EN 731:1996 | Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests |
BS EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods Determination of shrinkage and expansion |
BS EN ISO 5172 : 2006 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS |
BS EN 1841:1999 | Adhesives. Test methods for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
ISO 10722:2007 | Geosynthetics Index test procedure for the evaluation of mechanical damage under repeated loading Damage caused by granular material |
BS EN 13918:2003 | Gas welding equipment. Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes. Classification, specification and tests |
BS EN 14030:2001 | Geotextiles and geotextile-related products. Screening test method for determining the resistance to acid and alkaline liquids |
UNE-EN 1903:2015 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
BS EN 1724:1999 | Light conveyor belts. Test method for the determination of the coefficient of friction |
ISO 25619-2:2015 | Geosynthetics Determination of compression behaviour Part 2: Determination of short-term compression behaviour |
IEC 60312:2007 | Vacuum cleaners for household use - Methods of measuring the performance |
BS EN 1391:1998 | Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification |
EN ISO 5912:2011 | Camping tents (ISO 5912:2011) |
ISO 7331:2011 | Ski-poles for alpine skiing Requirements and test methods |
BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
BS EN ISO 15711:2004 | Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water |
BS EN ISO 13426-2:2005 | Geotextiles and geotextile-related products. Strength of internal structural junctions Geocomposites |
BS EN 1897:2001 | Geotextiles and geotextile-related products. Determination of the compressive creep properties |
ISO 11110:2015 | Winter-sports equipment Test devices for the setting of the functional unit ski/boot/binding Requirements and tests |
ISO 6891:1983 | Timber structures Joints made with mechanical fasteners General principles for the determination of strength and deformation characteristics |
BS EN 1903:2015 | Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing |
BS EN 20187:1993 | Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
DIN EN 15307:2015-04 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
BS EN 1373:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear test |
ISO 9864:2005 | Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products |
EN ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006) |
BS EN 965:1995 | Geotextiles and geotextile-related products. Determination of mass per unit area |
BS EN 730-2:2002 | Gas welding equipment. Safety devices Not incorporating a flame (flashback) arrestor |
BS EN 12961:2001 | Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
BS EN 961:1996 | Gas welding equipment. Manifold regulators used in welding, cutting and allied processes up to 200 bar |
BS EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation |
BS EN 392:1995 | Glued laminated timber. Shear test of glue lines |
BS EN 13851:2003 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of flexural and compressive strength |
BS EN 927-3:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood Natural weathering test |
BS EN 1263-1:2014 | Temporary works equipment. Safety nets Safety requirements, test methods |
BS EN 1637:1999 | Light conveyor belts. Test methods for the measurement of the electrical resistances |
BS EN 26891:1991 | Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics |
BS EN ISO 7785-1:1999 | Dental handpieces High-speed air turbine handpieces |
BS EN 29539:1992 | Specification for materials for equipment used in gas welding, cutting and allied processes |
ISO 11498:1997 | Dental handpieces Dental low-voltage electrical motors |
ISO 22264:2006 | Telemark ski-boots for adults Interface with Telemark ski-bindings Requirements and test methods |
BS EN 13408:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of bond strength |
BS EN ISO 15465:2004 | Pipework. Stripwound metal hoses and hose assemblies |
UNE-EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
ISO 11416:1995 | Tennis rackets Racket components and physical parameters |
BS EN ISO 10062:2008 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
BS EN ISO 21530:2004 | Dentistry. Materials used for dental equipment surfaces. Determination of resistance to chemical disinfectants |
BS EN 1718:1999 | Light conveyor belts. Test method for the measurement of the electrostatic field generated by a running light conveyor belt |
I.S. EN 1372:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
ISO 7785-1:1997 | Dental handpieces Part 1: High-speed air turbine handpieces |
15/30320322 DC : 0 | BS ISO 15242-1 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS |
UNE-EN 15307:2015 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
ISO 12236:2006 | Geosynthetics — Static puncture test (CBR test) |
BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
BS EN 1129-2:1995 | Furniture. Foldaway beds. Safety requirements and testing Test methods |
ISO 3665:2011 | Photography Intra-oral dental radiographic film and film packets Manufacturer specifications |
ISO 8362-5:2016 | Injection containers and accessories Part 5: Freeze drying closures for injection vials |
BS EN 13057:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption |
UNE-EN ISO 5912:2012 | Camping tents (ISO 5912:2011) |
BS EN 522:1998 | Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification |
BS EN 26599-1:1993 | Packaging. Sacks. Conditioning for testing. Paper sacks |
UNE-EN 1902:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
ISO 2503:2009 | Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) |
BS EN ISO 3630-1:2008 | Dentistry. Root-canal instruments General requirements and test methods |
BS EN ISO 9863-2:1996 | Geotextiles and geotextile-related products. Determination of thickness at specified pressures Procedure for determination of thickness of single layers of multilayer products |
BS EN 15272-2:2007 | Inland navigation vessels. Rope leading Fairlead |
ISO 15465:2004 | Pipework — Stripwound metal hoses and hose assemblies |
ISO 10321:2008 | Geosynthetics — Tensile test for joints/seams by wide-width strip method |
I.S. EN 13415:2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
ISO 2231:1989 | Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing |
ISO 4090:2001 | Photography Medical radiographic cassettes/screens/films and hard-copy imaging films Dimensions and specifications |
BS EN 1937:1999 | Test method for hydraulic setting floor smoothing and/or levelling compounds. Standard mixing procedures |
BS EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
ISO 22523:2006 | External limb prostheses and external orthoses — Requirements and test methods |
ISO/TR 10722-1:1998 | Geotextiles and geotextile-related products — Procedure for simulating damage during installation — Part 1: Installation in granular materials |
BS EN 1723:2000 | Light conveyor belts. Method of test for the determination of the relaxed elastic modulus |
BS EN ISO 12236:2006 | Geosynthetics. Static puncture test (CBR test) |
ISO 15344:2005 | Snowboard step-in bindings — Requirements and test methods |
ISO 5172:2006 | Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests |
BS EN 1372:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Peel test |
ISO 21530:2004 | Dentistry — Materials used for dental equipment surfaces — Determination of resistance to chemical disinfectants |
BS EN 14510:2005 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
BS ISO 15242-1:2015 | Rolling bearings. Measuring methods for vibration Fundamentals |
ISO 16000-10:2006 | Indoor air — Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method |
DIN EN ISO 21530:2004-09 | Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004) |
UNI EN ISO 5912 : 2011 | CAMPING TENTS |
BS EN ISO 13433:2006 | Geosynthetics. Dynamic perforation test (cone drop test) |
ISO 12836:2015 | Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy |
I.S. EN 1373:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
BS EN 927-5:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood Assessment of the liquid water permeability |
BS EN ISO 11143:2008 | Dental equipment. Amalgam separators |
BS EN 730:1995 | Gas welding equipment. Equipment used in gas welding, cutting and allied processes, safety devices for fuel gases and oxygen or compressed air. General specifications, requirements and tests |
BS EN ISO 10319:2015 | Geosynthetics. Wide-width tensile test |
BS EN 14080:2013 | Timber structures. Glued laminated timber and glued solid timber. Requirements |
I.S. EN 1903:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
BS EN 13562:2000 | Geotextiles and geotextile-related products. Determination of resistance to penetration by water (hydrostatic pressure test) |
ISO 13427:2014 | Geosynthetics Abrasion damage simulation (sliding block test) |
IEC 62826:2014 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance |
BS EN 14414:2004 | Geosynthetics. Screening test method for determining chemical resistance for landfill applications |
ISO 9073-10:2003 | Textiles Test methods for nonwovens Part 10: Lint and other particles generation in the dry state |
BS EN 730-1:2002 | Gas welding equipment. Safety devices Incorporating a flame (flashback) arrestor |
UNE-EN 14574:2017 | Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics |
UNE-EN ISO 9239-1:2011 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
BS EN ISO/IEC 11159:1998 | Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines |
ISO 6599-1:1983 | Packaging — Sacks — Conditioning for testing — Part 1: Paper sacks |
ISO 25619-1:2008 | Geosynthetics Determination of compression behaviour Part 1: Compressive creep properties |
BS EN ISO 12957-2:2005 | Geotextiles. Determination of friction characteristics Inclined plane test |
BS EN 13738:2004 | Geotextiles and geotextile-related products. Determination of pullout resistance in soil |
DIN EN 13743:2017-04 | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
DIN EN 13851:2004-02 | METHODS OF TEST FOR HYDRAULIC SETTING FLOOR SMOOTHING AND/OR LEVELLING COMPOUNDS - DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
EN 20187:1993 | Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) |
EN 927-5:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability |
EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
EN ISO 10062:2008 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006) |
EN 522 : 1998 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - BOND STRENGTH - MINIMUM REQUIREMENTS AND ADHESIVE CLASSIFICATION |
EN ISO 3665:2013 | Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011) |
EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
EN 730-2:2002 | Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor |
EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
EN ISO 13428:2005 | Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005) |
EN ISO 25619-2:2015 | Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015) |
EN 927-3:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
EN 15820:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness |
EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
EN 14510:2005 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
EN 1724 : 1998 COR 1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION |
EN ISO/IEC 11159 : 1998 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
EN ISO 16000-10:2006 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
EN 282 : 1991 | AVALANCHE BEACONS - TRANSMITTER/RECEIVER SYSTEMS - SAFETY REQUIREMENTS AND TESTING |
EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
EN ISO 15711:2004 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
EN 15817:2011 | Polymer modified bituminous thick coatings for waterproofing - Water resistance |
EN ISO 12957-2:2005 | Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005) |
EN ISO 9863-2 : 1996 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES - PART 2: PROCEDURE FOR DETERMINATION OF THICKNESS OF SINGLE LAYERS OF MULTILAYER PRODUCTS |
EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation |
EN ISO 13433:2006 | Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006) |
EN ISO 10773:2011 | Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011) |
EN ISO 3630-1:2008 | Dentistry - Root-canal instruments - Part 1: General requirements and test methods (ISO 3630-1:2008) |
EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
EN 1937:1999 | Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures |
EN ISO 15465:2004 | Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004) |
EN 964-1 : 1995 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES - PART 1: SINGLE LAYERS |
EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
EN ISO 7785-1:1999 | Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
EN 737-4 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
EN 15062:2006 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
EN 1841:1998 | Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
EN 965 : 1995 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF MASS PER UNIT AREA |
EN 29539 : 1992 | SPECIFICATION FOR MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
EN ISO 13426-1 : 2003 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
EN 730 : 1995 | GAS WELDING EQUIPMENT - EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES, SAFETY DEVICES FOR FUEL GASES AND OXYGEN OR COMPRESSED AIR - GENERAL SPECIFICATIONS, REQUIREMENTS AND TESTS |
EN 1722 : 1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE MAXIMUM TENSILE STRENGTH |
EN 15815:2011 | Polymer modified bituminous thick coatings for waterproofing - Resistance to compression |
EN 14574:2015 | Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics |
EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
EN 13918 : 2003 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
EN 26599-1 : 1992 | PACKAGING - SACKS - CONDITIONING FOR TESTING - PAPER SACKS (ISO 6599-1:1983) |
EN 16416:2013 | Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head |
EN 14151:2010 | Geosynthetics - Determination of burst strength |
EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
EN 15813:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures |
EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
EN 27813:1992/AC:1992 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
EN 1903:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
EN ISO 13427:2014 | Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014) |
EN 1637 : 1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE MEASUREMENT OF THE ELECTRICAL RESISTANCES |
EN 392:1995 | Glued laminated timber - Shear test of glue lines |
EN 15646:2009 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
EN 1392:2006 | Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
EN ISO 12836:2015 | Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2015) |
EN 918 : 1995 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DYNAMIC PERFORATION TEST (CONE DROP TEST) |
EN 15272-2:2007 | Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead |
EN 730-1:2002 | Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor |
EN 13738 : 2004 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF PULLOUT RESISTANCE IN SOIL |
EN ISO 11143:2008 | Dentistry - Amalgam separators (ISO 11143:2008) |
EN ISO 13294:1997 | Dental handpieces - Dental air-motors (ISO 13294:1997) |
EN ISO 21530:2004 | Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004) |
EN ISO 10580:2012 | Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010) |
EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
EN ISO 2231 : 1995 | RUBBER- OR PLASTICS-COATED FABRICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
EN ISO 11498:1999 | Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997) |
EN 1902:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
EN ISO 13426-2:2005 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) |
EN ISO 4090:2004 | Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications (ISO 4090:2004) |
EN 731:1995 | Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests |
EN 1723 : 1999 | LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS |
EN 927-4 : 2000 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 4: ASSESSMENT OF THE WATER-VAPOUR PERMEABILITY |
EN 13872:2004 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change |
EN ISO 13431:1999 | Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) |
EN 585 : 1994 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 200 BAR |
EN 13851 : 2003 | METHODS OF TEST FOR HYDRAULIC SETTING FLOOR SMOOTHING AND/OR LEVELLING COMPOUNDS - DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
EN 961 : 1995 | GAS WELDING EQUIPMENT - MANIFOLD REGULATORS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 200 BAR |
EN 739:1998/A1:2002 | LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
EN 15307:2014 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
EN 1897 : 2001 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE COMPRESSIVE CREEP PROPERTIES |
EN ISO 10321:2008 | Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008) |
EN ISO 9073-10:2004 | Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state (ISO 9073-10:2003) |
EN 14293:2006 | ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
EN 14414 : 2004 | GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS |
EN 15818:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature |
EN 12964:2001 | Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature |
04/30106618 DC : DRAFT APR 2004 | BS ISO 21179 - LIGHT CONVEYOR BELTS - TEST METHOD FOR THE MEASUREMENT OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT |
ISO 6846:1992 | Photography Black-and-white continuous-tone papers Determination of ISO speed and ISO range for printing |
BS ISO 11110:2015 | Winter-sports equipment. Test devices for the setting of the functional unit ski/boot/binding. Requirements and tests |
BS ISO 491:2002 | Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions |
UNE-EN 15818:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature |
02/709945 DC : DRAFT SEP 2002 | ISO/DIS 9236-1 - PHOTOGRAPHY - SENSITOMETRY OF SCREEN/FILM SYSTEMS FOR MEDICAL RADIOGRAPHY - PART 1: DETERMINATION OF SENSITOMETRIC CURVE SHAPE, SPEED AND AVERAGE GRADIENT |
03/300798 DC : DRAFT JAN 2003 | EN 13483 - HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEM - SPECIFICATION |
BS ISO 5660-1:2015 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
NF EN 15813 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES |
DIN ISO 11087:2016-05 | ALPINE SKI-BINDINGS - RETENTION DEVICES - REQUIREMENTS AND TEST METHODS (ISO 11087:2015) |
DIN EN 15818:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature |
I.S. EN 13918:2003 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
PREN 1902 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
I.S. EN 730-2:2002 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 2: NOT INCORPORATING A FLAME (FLASHBACK) ARRESTOR |
BS ISO 9523:2015 | Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods |
I.S. EN 737-1:1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
08/30172827 DC : DRAFT AUG 2008 | BS EN 14151 - GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
14/30296443 DC : 0 | BS ISO 11087 - ALPINE SKI-BINDINGS - RETENTION DEVICES - REQUIREMENTS AND TEST METHODS |
BS 3900-0:1989 | Methods of test for paints General introduction |
DIN EN ISO 9539:2014-04 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010 + AMD.1:2013) |
BS ISO 5658-4:2001 | Reaction to fire tests. Spread of flame Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
BS EN 15818:2011 | Polymer modified bituminous thick coatings for waterproofing. Determination of dimensional stability at high temperature |
I.S. EN ISO 13294:1998 | DENTAL HANDPIECES - DENTAL AIR-MOTORS |
15/30316155 DC : 0 | BS ISO 16840-2 - WHEELCHAIR SEATING - PART 2: DETERMINATION OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF DEVICES INTENDED TO MANAGE TISSUE INTEGRITY - SEAT CUSHIONS |
BS EN ISO 10722:2007 | Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material |
BS ISO 17178:2013 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
BS ISO 16057:2002 | Coated abrasives. Vulcanized fibre discs |
DIN EN ISO 25619-1:2009-06 | Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008) |
PD CEN/TS 14417:2014 | Geosynthetic barriers. Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers |
02/123547 DC : DRAFT SEP 2002 | BS 2782-0 - METHODS OF TESTING - PLASTICS - PART 0: INTRODUCTION |
BS ISO 16840-6:2015 | Wheelchair seating Simulated use and determination of the changes in properties of seat cushions |
DIN 53170:2009-08 | SOLVENTS FOR PAINTS AND VARNISHES - DETERMINATION OF THE EVAPORATION RATE |
05/30136487 DC : DRAFT JUL 2005 | EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
PREN 1360 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
NAPM IT2.41 : 0 | PHOTOGRAPHY - SENSITOMETRY OF SCREEN/FILM SYSTEMS FOR MEDICAL RADIOGRAPHY - PART 1: DETERMINATION OF SENSITOMETRIC CURVE SHAPE, SPEED AND AVERAGE GRADIENT |
DIN ISO 2240:2005-10 | Photography - Colour reversal camera films - Determination of ISO speed (ISO 2240:2003) |
13/30275849 DC : 0 | BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
UNE-EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
11/30237910 DC : 0 | BS EN 927-3 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
CSA Z323.4.12 : 0 | WHEELCHAIRS - CLIMATIC TESTS FOR ELECTRIC WHEELCHAIRS |
BS EN ISO 12836:2015 | Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy |
BS ISO 6:1993 | Photography. Black-and-white pictorial still camera negative film/process systems. Determination of ISO speed |
BS EN 15813:2011 | Polymer modified bituminous thick coatings for waterproofing. Determination of flexibility at low temperatures |
PD CEN/TS 16499:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Resistance to blocking of paints and varnishes on wood |
03/311846 DC : DRAFT AUG 2003 | BS ISO 16840-3 - WHEELCHAIR SEATING - PART 3: POSTURAL SUPPORT DEVICES - MEASUREMENT OF STATIC, IMPACT AND REPETITIVE LOAD STRENGTHS |
10/30216835 DC : 2010 | BS ISO 7331 - SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
ASTM F 2494 : 2005 : R2011 | Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment (Withdrawn 2020) |
DIN ISO 11110:2016-05 | WINTER-SPORTS EQUIPMENT - TEST DEVICES FOR THE SETTING OF THE FUNCTIONAL UNIT SKI/BOOT/BINDING - REQUIREMENTS AND TESTS (ISO 11110:2015) |
BIS IS 16078 : 2013 | GEOSYNTHETICS - STATIC PUNCTURE TEST (CBR TEST) |
11/30250270 DC : 0 | BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
DIN 50014:1985-07 | CLIMATES AND THEIR TECHNICAL APPLICATION; STANDARD ATMOSPHERES |
91/83289 DC : DRAFT DEC 1991 | PREN 3624 - AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
ISO 19049:2016 | Timber structures Test method Static load tests for horizontal diaphragms including floors and roofs |
BS EN ISO 10773:2011 | Clay geosynthetic barriers. Determination of permeability to gases |
PD ISO/TS 16840-11:2014 | Wheelchair seating Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity |
10/30216645 DC : 0 | BS EN 12226 - GEOSYNTHETICS - GENERAL TESTS FOR EVALUATION FOLLOWING DURABILITY TESTING |
09/30184110 DC : 0 | BS ISO 16000-25 - INDOOR AIR - PART 25: DETERMINATION OF THE EMISSION OF SEMI-VOLATILE ORGANIC COMPOUNDS BY BUILDING PRODUCTS - MICRO-CHAMBER METHOD |
06/30156785 DC : 0 | BS EN ISO 25619-1 - GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
BS ISO 16840-10:2014 | Wheelchairs. Resistance to ignition of non-integrated seat and back support cushions Requirements and test methods |
ISO 3029:1995 | Photography 126-size cartridges Dimensions of cartridge, film and backing paper |
ISO 16067-2:2004 | Photography - Electronic scanners for photographic images - Spatial resolution measurements Part 2: Film scanners |
14/30280574 DC : 0 | BS ISO 16840-10 - WHEELCHAIR - RESISTANCE TO IGNITION OF NON-INTEGRATED SEAT AND BACK SUPPORT CUSHIONS - PART 10: REQUIREMENTS AND TEST METHODS |
NF ENV ISO 10722-1 : 98 XP | GEOTEXTILES AND GEOTEXTILES RELATED PRODUCTS - PROCEDURE FOR SIMULATING DAMAGE DURING INSTALLATION - PART 1: INSTALLATION IN GRANULAR MATERIALS |
12/30258159 DC : 0 | BS EN 16402 - PAINT AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
PD CEN/TS 16700:2014 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of resistance to impact of a coating on a wooden substrate |
DIN ISO 11040-4:2007-10 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
06/30149088 DC : DRAFT SEP 2006 | ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
BS EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing. Determination of crack bridging ability |
BS EN 62885-3:2015 | Surface cleaning appliances Wet carpet cleaning appliances. Methods for measuring the performance |
BS EN 16416:2013 | Geosynthetic clay barriers. Determination of water flux index. Flexible wall permeameter method at constant head |
04/30113213 DC : 0 | EN 14591-3 - EXPLOSION PROTECTION IN UNDERGROUND MINING - PROTECTIVE SYSTEMS - PART 3: WATER TROUGHS FOR EXPLOSION BARRIERS |
ISO 12957-1:2005 | Geosynthetics Determination of friction characteristics Part 1: Direct shear test |
13/30246948 DC : 0 | BS ISO 17554 - REACTION TO FIRE TESTS - MASS LOSS MEASUREMENT |
BS EN 15817:2011 | Polymer modified bituminous thick coatings for waterproofing. Water resistance |
15/30328599 DC : 0 | BS ISO 1099 - METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD |
NF EN 15820 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF WATERTIGHTNESS |
BS ISO 18560-1:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment Removal of formaldehyde |
BS EN ISO 25619-1:2008 | Geosynthetics. Determination of compression behaviour Compressive creep properties |
BS ISO 3772:2000 | Photography. Rolls of sensitized material for the pre-press industry. Dimensions and related requirements |
FD X07 008 : 2008 FD | METROLOGY - ARBORESCENCE OF STANDARDS AND WORK ON METROLOGY ('ROAD MAP' OF STANDARDS) |
I.S. EN 15813:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES |
ISO 5175-1:2017 | Gas welding equipment — Safety devices — Part 1: Devices incorporating a flame (flashback) arrestor |
BS ISO 14697:2007 | Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products |
06/30149441 DC : DRAFT SEP 2006 | ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
16/30333769 DC : DRAFT JAN 2016 | BS EN ISO 5175-2 - GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 2: NOT INCORPORATING A FLAME (FLASHBACK) ARRESTOR |
ISO 11040-4:2015 | Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
NFP 84 503 : 2008 XP | GEOMEMBRANES - GEOMEMBRANES LINING SYSTEMS - DETERMINATION OF BIAXIAL TENSILE STRENGTH |
ISO 14697:2007 | Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products |
BS ISO 5912 : 2003 AMD 15519 | CAMPING TENTS |
01/648266 DC : DRAFT MAY 2001 | ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
I.S. EN ISO 25619-2:2015 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR (ISO 25619-2:2015) |
BS 7650:1993 | Specification for pressure regulators used in welding, cutting and related processes with compressed gases up to 300 bar |
NFX 08 050-1 : 2003 | PHOTOLUMINESCENT SAFETY SYSTEMS - PART 1: GENERAL RULES |
04/30115437 DC : 0 | ISO 5598 - FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
CEN/TS 16360:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE |
CSA ISO/IEC 15457-3 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
ISO 14807:2001 | Photography Transmission and reflection densitometers Method for determining performance |
DIN EN ISO 25619-2:2015-12 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR (ISO 25619-2:2015) |
DIN EN ISO 9012:2011-12 | Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2008) |
S.R. CEN/TS 14418:2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
I.S. EN ISO 12836:2015 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
NFP 84 705 : 2008 | GEOSYNTHETIC BARRIERS - DETERMINATION OF THE SWELLING, FLOW AND PERMEABILITY CHARACTERISTICS OF GEOSYSNTHETIC CLAY LINERS (GCL) USING AN OEDOPERMEAMETER - CHARACTERISATION TEST AND PERFORMANCE TEST |
NF ISO 3366 : 1999 | COATED ABRASIVE PRODUCTS - ABRASIVE ROLLS |
ONORM EN ISO 25619-1 : 2009 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
UNE-EN 14151:2010 | Geosynthetics - Determination of burst strength |
ISO/TS 16840-12:2015 | Wheelchair seating Part 12: Apparatus and method for cushion envelopment testing |
ISO 15635:2001 | Coated abrasives Flap discs |
DIN ISO 16000-24:2013-01 | INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUND (EXCEPT FORMALDEHYDE) CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS (ISO 16000-24:2009) |
ISO 3366:1999 | Coated abrasives Abrasive rolls |
PREN 927-3 : DRAFT 2011 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
ISO 11312:2000 | Photography Sheets of sensitized material for the pre-press industry Dimensions and related requirements |
UNE-EN 16402:2014 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
ISO 14548:1998 | Photography Dimensions of glass plates |
NFX 07 008 : 2008 FD | METROLOGY - ARBORESCENCE OF STANDARDS AND WORK ON METROLOGY ("ROAD MAP" OF STANDARDS) |
UNI EN 15819 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - REDUCTION OF THE THICKNESS OF THE LAYER WHEN FULLY DRIED |
I.S. EN 62885-3:2015 | SURFACE CLEANING APPLIANCES - PART 3: WET CARPET CLEANING APPLIANCES - METHODS FOR MEASURING THE PERFORMANCE |
BS EN ISO 5175-1:2017 | Gas welding equipment. Safety devices Devices incorporating a flame (flashback) arrestor |
UNE-EN 15816:2011 | Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain |
IEC TR 60721-4-6:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment |
EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
PREN 13419-1 : DRAFT 2002 | BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 1: EMISSION TEST CHAMBER METHOD |
EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
ISO 28620:2010 | Medical devices Non-electrically driven portable infusion devices |
ISO 16525-2:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 2: Determination of electrical characteristics for use in electronic assemblies |
ASTM D 7143 : 2017 : REDLINE | Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products |
ISO 16000-30:2014 | Indoor air Part 30: Sensory testing of indoor air |
NF ISO 5355 : 2006 | ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
BS EN ISO 12957-1:2005 | Geotextiles. Determination of friction characteristics Direct shear test |
IEC TR 60721-4-7:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use |
ISO 15739:2017 | Photography — Electronic still-picture imaging — Noise measurements |
ISO 1008:1992 | Photography — Paper dimensions — Pictorial sheets |
ISO 16525-1:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods |
ISO 9957-3:1997 | Fluid draughting media Part 3: Water-based coloured draughting inks Requirements and test conditions |
I.S. EN ISO 9012:2011 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS (ISO 9012:2008) |
I.S. EN 60312:2008 | VACUUM CLEANERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
ONORM EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
UNE-EN ISO 2503:2010 | Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009) |
DIN EN 14591-2:2007-07 | Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers |
DIN EN ISO 16000-10:2006-06 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
DIN EN ISO 10319:2015-09 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
BS EN ISO 2231:1995 | Rubber- or plastics-coated fabrics. Standard atmospheres for conditioning and testing |
BS EN 13415:2002 | Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films |
BS EN ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Extraction of soluble contaminants for analysis. The Bresle method |
UNE-EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
BS EN 13872:2004 | Method of test for smoothing and/or levelling compounds. Determination of dimensional change |
ISO 10319:2015 | Geosynthetics — Wide-width tensile test |
BS EN 13200-4:2006 | Spectator facilities Seats. Product characteristics |
BS EN ISO 16000-10:2006 | Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method |
ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
BS EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
ISO 13294:1997 | Dental handpieces Dental air-motors |
I.S. EN ISO 5912:2011 | CAMPING TENTS (ISO 5912:2011) |
BS EN 13238:2010 | Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates |
BS EN 14574:2015 | Geosynthetics. Determination of the pyramid puncture resistance of supported geosynthetics |
BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
BS EN 13409:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of setting time |
BS EN ISO 9239-1:2010 | Reaction to fire tests for floorings Determination of the burning behaviour using a radiant heat source |
BS EN ISO 13427:2014 | Geosynthetics. Abrasion damage simulation (sliding block test) |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
BS EN 737-1:1998 | Medical gas pipeline systems Terminal units for compressed medical gases and vacuum |
BS EN 918:1996 | Geotextiles and geotextile-related products. Dynamic perforation test (Cone drop test) |
DIN EN ISO 13426-1:2003-08 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
BS EN 13999-1:2013 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
ISO 3630-1:2008 | Dentistry Root-canal instruments Part 1: General requirements and test methods |
EN 62885-3:2015 | Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance |
CEN/TS 16516:2013 | Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air |
DIN EN ISO 16000-9:2008-04 | Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006) |
DIN EN ISO 5912:2013-08 | CAMPING TENTS (ISO 5912:2011) |
ONORM ONR CEN/TS 16360 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE (CEN/TS 16360:2012) |
EN 13562:2000 | Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test) |
ONORM ISO 7331 : 2012 | SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS (ISO 7331:2011) |
EN 50375:2002 | Testing methodology for wipers used in electrical insulating oil |
EN 60312:2008 | Vacuum cleaners for household use - Methods of measuring the performance |
DIN EN 14510:2005-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
DIN EN 13918:2003-08 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
DIN EN ISO 9073-10:2005-03 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 10: LINT AND OTHER PARTICLES GENERATION IN THE DRY STATE |
CEN/TS 16700:2014 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate |
EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
DIN EN 13738:2005-02 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF PULLOUT RESISTANCE IN SOIL |
DIN ISO 5912:2004-05 | CAMPING TENTS |
CEN/TS 14418:2014 | Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers |
DIN EN ISO 4090:2004-08 | Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications (ISO 4090:2001) |
DIN EN ISO 13428:2005-05 | Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005); German version EN ISO 13428:2005 |
DIN EN 14030:2003-11 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO ACID AND ALKALINE LIQUIDS |
EN 12523 : 1999 | EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
EN 1244:1998 | Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
CEN/TS 14417:2014 | Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers |
EN 13200-4:2006 | Spectator facilities - Part 4: Seats - Product characteristics |
CEN/TR 13259:2013 | Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes |
DIN ISO 5800:2003-11 | PHOTOGRAPHY - COLOUR NEGATIVE FILMS FOR STILL PHOTOGRAPHY - DETERMINATION OF ISO SPEED |
DIN ISO 6106:2015-11 | ABRASIVE PRODUCTS - CHECKING THE GRAIN SIZE OF SUPERABRASIVES (ISO 6106:2013) |
DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
DIN ISO 11040-4:2017-07 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
DIN EN 14414:2004-08 | Geosynthetics - Screening test method for determining chemical resistance for landfill applications |
DIN EN ISO 15711:2005-03 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
DIN EN 16402:2014-02 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
DIN EN ISO 15465:2004-07 | Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004) |
CEN/TS 16359 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
DIN EN ISO 3630-1:2008-04 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
DIN ISO 22264:2007-01 | TELEMARK SKI-BOOTS FOR ADULTS - INTERFACE WITH TELEMARK SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
DIN EN 15646:2009-07 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
DIN EN ISO 5172:2015-12 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS (ISO 5172:2006 + AMD 1:2012 + AMD 2:2015) |
BS 3424-2(1992) : 1992 AMD 8189 | TESTING COATED FABRICS - METHOD 4. PRE-CONDITIONING AND CONDITIONING OF COATED FABRICS FOR TESTING PURPOSES |
ONORM EN ISO 9012 : 2011 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS (ISO 9012:2008) |
BS 5550-3.1.1:1993 | Cinematography. 35 mm film. Raw stock Specification for the cutting and perforating dimensions of 35 mm motion-picture film and magnetic film |
NF EN ISO 13426-2 : 2005 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 2: GEOCOMPOSITES |
PREN 6095 : 200P1 | AEROSPACE SERIES - ROTARY FASTENERS - STRUCTURAL AND NON-STRUCTURAL APPLICATIONS - TECHNICAL SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.