• There are no items in your cart

EN 1991-1-2:2002/AC:2013

Current
Current

The latest, up-to-date edition.

EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE
Amendment of

EN 1991-1-2:2002

Published date

02-06-2013

Foreword
Section 1 - General
1.1 Scope
1.2 Normative references
1.3 Assumptions
1.4 Distinction between Principles and Application
    Rules
1.5 Terms and definitions
    1.5.1 Common terms used in Eurocode Fire parts
    1.5.2 Special terms relating to design in general
    1.5.3 Terms relating to thermal actions
    1.5.4 Terms relating to heat transfer analysis
1.6 symbols
Section 2 - Structural Fire design procedure
2.1 General
2.2 Design fire scenario
2.3 Design fire
2.4 Temperature Analysis
2.5 Mechanical Analysis
Section 3 - Thermal actions for temperature analysis
3.1 General rules
3.2 Nominal temperature-time curves
    3.2.1 Standard temperature-time curve
    3.2.2 External fire curve
    3.2.3 Hydrocarbon curve
3.3 Natural fire models
    3.3.1 Simplified fire models
          3.3.1.1 General
          3.3.1.2 Compartment fires
          3.3.1.3 Localised fires
    3.3.2 Advanced fire models
Section 4 - Mechanical actions for structural analysis
4.1 General
4.2 Simultaneity of actions
    4.2.1 Actions from normal temperature design
    4.2.2 Additional actions
4.3 Combination rules for actions
    4.3.1 General rule
    4.3.2 Simplified rules
    4.3.3 Load level
Annex A (informative) Parametric temperature-time curves
Annex B (informative) Thermal actions for external
        members - Simplified calculation method
      B.1 Scope
      B.2 Conditions of use
      B.3 Effects of wind
          B.3.1 Mode of ventilation
          B.3.2 Flame deflection by wind
      B.4 Characteristics of fire and flames
          B.4.1 No forced draught
          B.4.2 Forced draught
      B.5 Overall configuration factors
Annex C (informative) Localised fires
Annex D (informative) Advanced fire models
      D.1 One-zone models
      D.2 Two-zone models
      D.3 Computational fluid dynamic models
Annex E (informative) Fire load densities
      E.1 General
      E.2 Determination of fire load densities
          E.2.1 General
          E.2.2 Definitions
          E.2.3 Protected fire loads
          E.2.4 Net calorific values
          E.2.5 Fire load classification of occupancies
          E.2.6 Individual assessment of fire load
                densities
      E.3 Combustion behaviour
      E.4 Rate of heat release Q
Annex F (informative) Equivalent time of fire exposure
Annex G (informative) Configuration factor
      G.1 General
      G.2 Shadow effects
      G.3 External members
Bibliography

Pertains to buildings, with a fire load related to the building and its occupancy.

Committee
CEN/TC 250
DevelopmentNote
Supersedes ENV 1991-2-2. (12/2002) Supersedes ENV 1991-1-2. (03/2008) To be read in conjunction with EN 1990, EN 1991-1-1, EN 1991-1-3 and EN 1991-1-4. (05/2009)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

DIN EN 15254-5 E : 2010 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
14/30300270 DC : 0 BS ISO 16733-1 - FIRE SAFETY ENGINEERING - SELECTION OF DESIGN FIRE SCENARIOS AND DESIGN FIRES - PART 1: SELECTION OF DESIGN FIRE SCENARIOS
04/30124505 DC : 0 EN 15080-8 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
PD CEN/TR 1317-6:2012 Road restraint systems Pedestrian restraint system. Pedestrian parapets
I.S. EN 1996-1-2:2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
15/30328765 DC : 0 BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
I.S. EN 1993-6:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
S.R. CEN/TR 1317-6:2012 ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
BS EN 16869:2017 Design/construction of Via Ferratas
16/30330693 DC : 0 BS EN 15254-5 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
DIN EN 15254-7:2012-09 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
PREN 12871 : DRAFT 2011 WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
ISO/TS 24679:2011 Fire safety engineering Performance of structures in fire
BS EN 1993-4-2 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
DIN EN 15254-5:2010-04 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
PREN 12602 : DRAFT 2015 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
UNE-EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
18/30369304 DC : DRAFT APR 2018 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
14/30297831 DC : 0 BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 16869:2017/AC:2018 DESIGN/CONSTRUCTION OF VIA FERRATAS
ISO/TR 24679-3:2015 Fire safety engineering Performance of structure in fire Part 3: Example of an open car park
EN 1993-4-2:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
EN 15567-1:2015 Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements
I.S. EN 1991-1-6:2005 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION
DIN EN 1993-1-2:2010-12 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2009)
DIN EN 14879-1 E : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
DIN EN 1473:2016-10 Installation and equipment for liquefied natural gas - Design of onshore installations
DIN EN 1996-1-2:2011-04 Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2010)
13/30280057 DC : 0 BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY
BS EN 14620-4:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Insulation components
DIN EN 14879-1:2005-12 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
BS EN 13451-1 : 2011 SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 1993-6:2010-12 Eurocode 3: Design of steel structures - Part 6: Crane supporting structures (includes Corrigendum AC:2009)
DIN EN 15254-2:2009-10 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
CEN/TR 1317-6 : 2012 ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
EN 12871:2013 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
I.S. EN 1994-1-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
I.S. EN 16869:2017 DESIGN/CONSTRUCTION OF VIA FERRATAS
13/30277104 DC : 0 BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
I.S. EN 1995-1-2:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
PREN 1176-1 : DRAFT 2014 PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
PD CEN/TR 16949:2016 Road restraint system. Pedestrian restraint system. Pedestrian parapets
13/30277107 DC : 0 BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
BS ISO 16733-1:2015 Fire safety engineering. Selection of design fire scenarios and design fires Selection of design fire scenarios
15/30321787 DC : 0 BS EN 16869 - DESIGN/CONSTRUCTION OF VIA FERRATA
DIN EN 12602:2015-12 (Draft) PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
CEN/TR 16949:2016 Road restraint system - Pedestrian restraint system - Pedestrian parapets
PREN 14389-2 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
UNI EN 15080-12 : 2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
10/30218985 DC : DRAFT JUNE 2010 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
BS EN 1999-1-2:2007 Eurocode 9. Design of aluminium structures Structural fire design
PREN 13107 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
I.S. EN 15080-12:2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
UNI CEN/TR 1317-6 : 2012 ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
I.S. EN 1993-4-2:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
I.S. EN 1176-1:2017 PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
ISO 16733-1:2015 Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios
UNI EN 15254-5 : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
PREN 752 : DRAFT 2015 DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT
UNE-EN 15080-12:2011 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
DIN EN 12871:2013-09 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
DIN EN 1995-1-2 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
BS EN 12871:2013 Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
BS EN 15567-1:2015 Sports and recreational facilities. Ropes courses Construction and safety requirements
BS EN 14389-1:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
BS EN 1473:2016 Installation and equipment for liquefied natural gas. Design of onshore installations
I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
DIN EN 1473:1997-11 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 13451-1:2011 SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 12602:2016-12 Prefabricated reinforced components of autoclaved aerated concrete
I.S. EN 12871:2013 WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
I.S. EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
09/30194124 DC : DRAFT MAY 2009 BS EN 15254-7 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 7: NON-LOAD BEARING SANDWICH PANELS - CEILINGS
11/30253904 DC : 0 BS EN 12871 - WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
PREN 14389-1 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
PREN 1473 : DRAFT 2018 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
BS EN 15254-2:2009 Extended application of results from fire resistance tests. Nonloadbearing walls Masonry and gypsum blocks
14/30299480 DC : 0 BS EN 1176-1 - PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
UNE-EN 1996-1-2:2011 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
BS EN 15254-5:2009 Extended application of results from fire resistance tests. Non-loadbearing walls Metal sandwich panel construction
DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
ISO/TS 16733:2006 Fire safety engineering Selection of design fire scenarios and design fires
17/30359807 DC : DRAFT SEP 2017 BS ISO 24679-1 - FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE - PART 1: GENERAL
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
13/30275585 DC : 0 BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
PD ISO/TR 24679-3:2015 Fire safety engineering. Performance of structure in fire Example of an open car park
DIN EN 15080-12:2011-04 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
I.S. EN 15254-7:2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
PREN 15254-7 : DRAFT 2016 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
BS EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
UNI EN 15254-2 : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
PREN 1090-4 : DRAFT 2014 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 1993-4-1:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
I.S. EN 1993-4-1:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
UNE-EN 12602:2011 Prefabricated reinforced components of autoclaved aerated concrete
EN 1176-1:2017 Playground equipment and surfacing - Part 1: General safety requirements and test methods
DIN EN 1991-1-6:2010-12 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS, ACTIONS DURING EXECUTION
EN 13451-1:2011+A1:2016 Swimming pool equipment - Part 1: General safety requirements and test methods
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
EN 1993-1-2:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1991-4 : 2006 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS
UNI EN 1991-1-6 : 2005 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION
UNI EN 1995-1-2 : 2005 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
UNI EN 1994-1-2 : 2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1993-1-2 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1992-1-2 : 2005 EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 12871 : 2013 WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
UNI EN 1996-1-2 : 2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1993-6 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
UNI EN 1999-1-2 : 2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
16/30330690 DC : 0 BS EN 15254-7 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
07/30172842 DC : 0 BS EN 15080-12 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
DIN EN 1993-4-2:2017-09 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
05/30134891 DC : 0 EN 15254-2 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
15/30325882 DC : 0 BS EN 16932-1 - DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
I.S. EN 1999-1-2:2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 1992-1-2:2010-12 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008)
UNE-EN 1995-1-2:2016 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design.
15/30326160 DC : 0 BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS
ISO/TR 13571-2:2016 Life-threatening components of fire Part 2: Methodology and examples of tenability assessment
UNI EN 15254-7 : 2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
PREN 15254-5 : DRAFT 2016 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
EN 15254-7:2018 Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction
I.S. EN 1992-1-2:2005 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 1991-4:2010-12 EUROCODE 1: ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS
BS EN 1993-6:2007 Eurocode 3. Design of steel structures Crane supporting structures
BS EN 1992-1-2:2004 Eurocode 2. Design of concrete structures General rules - Structural fire design
UNE-EN 12871:2013 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
BS EN 14879-1:2005 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate
BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
UNE-EN 1991-4:2011 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
BS EN 1995-1-2:2004 Eurocode 5. Design of timber structures General - Structural fire design
BS EN 1991-4:2006 Eurocode 1. Actions on structures Silos and tanks
BS EN 14620-1:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C General
BS EN 1994-1-2 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
I.S. EN 15567-1:2015 SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
BS EN 1991-1-6:2005 Eurocode 1. Actions on structures General actions. Actions during execution
EN 1992-1-2:2004/AC:2008 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
EN 15254-2:2009 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks
EN 14620-1:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General
EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
EN 1991-1-6:2005/AC:2013 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1995-1-2:2004/AC:2009 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
EN 1999-1-2:2007/AC:2009 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
EN 1993-6:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
EN 1991-4:2006/AC:2012 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS
EN 15080-12:2011 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
EN 14620-4:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components
EN 1994-1-2:2005/A1:2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1996-1-2:2005/AC:2010 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
DD ISO/TS 24679:2011 Fire safety engineering. Performance of structures in fire
BS EN 1993-4-1 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
UNE-EN 1993-1-2:2016 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
DIN EN 15254-2 E : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
BS EN 15080-12:2011 Extended application of results from fire resistance tests Loadbearing masonry walls
UNE-ISO 16733-1:2017 Fire safety engineering.Selection of design fire scenarios and design fires.Part 1: Selection of design fire scenarios
DIN EN 1993-4-1:2017-09 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
DIN EN 1999-1-2:2010-12 Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design (includes Corrigendum AC:2009)
14/30297213 DC : 0 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
BS EN 1176-1:2017 Playground equipment and surfacing General safety requirements and test methods
KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
UNE-EN 1994-1-2:2016 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design.
BS EN 15254-7:2012 Extended application of results from fire resistance tests. Non-loadbearing ceilings Metal sandwich panel construction
UNE-EN 15254-2:2010 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks
S.R. CEN/TR 16949:2016 ROAD RESTRAINT SYSTEM - PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
I.S. EN 15254-2:2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NONLOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 15254-5:2018 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction
I.S. EN 15254-5:2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
I.S. EN 12602:2016 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
DIN EN 1994-1-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008)
BS EN 1993-1-2:2005 Eurocode 3. Design of steel structures General rules - Structural fire design
BS EN 1996-1-2:2005 Eurocode 6. Design of masonry structures General rules. Structural fire design
EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
DIN EN 15567-1:2015-08 SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
DIN EN 1995-1-2:2010-12 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design (includes Corrigendum AC:2009)

PREN 13501-2 : DRAFT 2015 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES
ISO 1716:2010 Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
EN 1991-1-1:2002/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
EN 1363-2:1999 Fire resistance tests - Part 2: Alternative and additional procedures
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.