EN ISO 4032:2012
Withdrawn
Withdrawn
Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Published date
12-19-2012
Publisher
Withdrawn date
06-30-2013
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Dimensions
4 Requirements and reference International Standards
5 Designation
Bibliography
ISO 4032:2012 specifies the characteristics of hexagon regular nuts (style 1), with threads from M1,6 up to and including M64, with product grade A for threads of diameter less than or equal to M16 and product grade B for threads of diameter greater than M16.
| Committee |
CEN/TC 185
|
| DevelopmentNote |
Supersedes EN 24032. (06/2007)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DS EN ISO 4032 : 2013 | Identical |
| BS EN ISO 4032:2012 | Identical |
| PN EN ISO 4032 : 2013 | Identical |
| NF EN ISO 4032 : 2013 | Identical |
| SS-EN ISO 4032:2013 | Identical |
| ISO 4032:2012 | Identical |
| NEN EN ISO 4032 : 2013 | Identical |
| DIN EN ISO 4032:2016-05 (Draft) | Identical |
| DIN EN ISO 4032:2013-04 | Identical |
| NBN EN ISO 4032 : 2013 | Identical |
| I.S. EN ISO 4032:2012 | Identical |
| NS EN ISO 4032 : 2012 | Identical |
| UNE-EN ISO 4032:2013 | Identical |
| DIN 83208:2002-08 | STAIRS AND GUARD RAILS FOR ENGINE ROOMS AND BOILER ROOMS IN SEAGOING SHIPS - PROTECTING PLATES |
| 14/30304786 DC : 0 | BS EN 15048-2 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| 10/30234610 DC : DRAFT NOV 2010 | BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS EN 14399-7:2007 | High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut assemblies |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| BS EN 14420-3:2013 | Hose fittings with clamp units Clamp units, bolted or pinned |
| EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN 7989-1:2001-04 | Washers for steel structures - Part 1: Product grade C |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| BS EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components |
| I.S. EN 14399-10:2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| NF EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS EN 14592 : 2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| PREN 14399-10 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| EN 14399-10:2018 | High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload |
| DIN EN 1993-1-8:2010-12 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
| I.S. EN 14399-3:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| DIN EN 14420-3:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN 15048-2:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| DIN EN 14399-3:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| I.S. EN 14420-3:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| VDI/VDE 2251 Blatt 1.1:2016-02 | Bolted joints - Tensioned joints - Precision engineering components |
| 13/30277431 DC : 0 | BS EN 14399-3 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| 15/30332551 DC : 0 | BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| PREN 14399-3 : DRAFT 2013 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| EN 14399-7:2007 | High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| DIN EN 14399-7:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| EN ISO 4759-1:2000 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000) |
| DIN 7989-2:2001-04 | Washers for steel structures - Part 2: Product grade A |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| DIN EN 14592:2012-07 | Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012) |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| 08/30173031 DC : DRAFT JAN 2008 | BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| DIN 19207:2004-02 | Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories |
| PREN 15048-2 : DRAFT 2014 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 14592:2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| DIN EN 15048-2:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| BS EN 14399-3:2015 | High-strength structural bolting assemblies for preloading System HR. Hexagon bolt and nut assemblies |
| BS EN 15048-2:2007 | Non-preloaded structural bolting assemblies Suitability test |
| BS EN 1993-1-8:2005 | Eurocode 3. Design of steel structures Design of joints |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN 14592:2008+A1:2012 | Timber structures - Dowel-type fasteners - Requirements |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| EN 15048-2:2016 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| EN 14399-3:2015 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| 15/30332545 DC : 0 | BS EN 14399-7 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| DIN 87101:2003-10 | NON-RETURN FLAPS (STORM VALVES), SELF-CLOSING, VERTICAL TYPE, DN 50 UP TO DN 150, PN 1 - MATING DIMENSIONS FOR FLANGES ACCORDING TO PN 10 |
| PREN 14420-3 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN 83205:2002-08 | STAIRS AND GUARD RAILS FOR ENGINE ROOMS AND BOILER ROOMS IN SEAGOING SHIPS - GUARD RAILS |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| 14/30301109 DC : 0 | BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
| PREN 14399-7 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| I.S. EN 14399-7:2007 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| I.S. EN 50180-2:2015 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| I.S. EN 1993-1-8:2005 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS (INCLUDING IRISH NATIONAL ANNEX) |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| UNE-EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| UNE-EN 1993-1-8:2013 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
| UNE-EN 14399-3:2016 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| UNE-EN 15048-2:2017 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| UNE-EN 14420-3:2014 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| UNE-EN 14592:2009 | Timber structures - Dowel-type fasteners - Requirements |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
| ISO 8839:1986 | Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread — Product grades A and B |
| ISO 10683:2014 | Fasteners — Non-electrolytically applied zinc flake coatings |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ISO 21670:2014 | Fasteners — Hexagon weld nuts with flange |
| ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 |
| ISO 4042:1999 | Fasteners — Electroplated coatings |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9 |
| ISO 4016:2011 | Hexagon head bolts — Product grade C |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 4034:2012 | Hexagon regular nuts (style 1) — Product grade C |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread — Product grades A and B |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| ISO 7043:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B |
| ISO 4015:1979 | Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter) |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 4017:2014 | Fasteners — Hexagon head screws — Product grades A and B |
| ISO 225:2010 | Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions |
| ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) — Product grade B |
| ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
| ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 |
| ISO 15071:2011 | Hexagon bolts with flange — Small series — Product grade A |
| ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 |
| ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
| ISO 12125:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| ISO 6157-2:1995 | Fasteners — Surface discontinuities — Part 2: Nuts |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12 |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| ISO 3269:2000 | Fasteners — Acceptance inspection |
| ISO 7044:2012 | Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B |
| ISO 4014:2011 | Hexagon head bolts — Product grades A and B |
| ISO 4018:2011 | Hexagon head screws — Product grade C |
| ISO 12126:2012 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B |
| ISO 4162:2012 | Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B |
Summarise
Sorry this product is not available in your region.