ISO 4032:2012
Withdrawn
Withdrawn
View Superseded by
Hexagon regular nuts (style 1) — Product grades A and B
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
12-13-2012
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 4032:2012 specifies the characteristics of hexagon regular nuts (style 1), with threads from M1,6 up to and including M64, with product grade A for threads of diameter less than or equal to M16 and product grade B for threads of diameter greater than M16.
| Committee |
ISO/TC 2/SC 12
|
| DevelopmentNote |
DRAFT ISO/DIS 4032 has been withdrawn by the publisher. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS EN ISO 4032 : 2013 | Identical |
| DIN EN ISO 4032:2013-04 | Identical |
| NF EN ISO 4032 : 2013 | Identical |
| NBN EN ISO 4032 : 2013 | Identical |
| NEN EN ISO 4032 : 2013 | Identical |
| NS EN ISO 4032 : 2012 | Identical |
| I.S. EN ISO 4032:2012 | Identical |
| AS 1112.1:2015 | Identical |
| PN EN ISO 4032 : 2013 | Identical |
| SAC GB/T 6170 : 2015 | Identical |
| SS-EN ISO 4032:2013 | Identical |
| IS 1364 PART 3 : 2018 | Identical |
| BS EN ISO 4032:2012 | Identical |
| EN ISO 4032:2012 | Identical |
| DIN EN ISO 4032:2016-05 (Draft) | Identical |
| I.S. EN 24032:1992 | Identical |
| BIS IS 1364-3 : 2002 | Identical |
| EN 24032 : 1991 | Identical |
| NEN ISO 4032 : 1992 | Identical |
| DIN EN 24032:1992-02 | Corresponds |
| UNE-EN ISO 4032:2013 | Identical |
| BS EN 24032:1992 | Identical |
| DIN 934:1987-10 | Similar to |
| NFE 25 401 : 1983 | Similar to |
| DIN 83208:2002-08 | STAIRS AND GUARD RAILS FOR ENGINE ROOMS AND BOILER ROOMS IN SEAGOING SHIPS - PROTECTING PLATES |
| 02/705734 DC : DRAFT MAY 2002 | EN ISO 17292 - METAL BALL VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| 16/30340613 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| 03/319369 DC : DRAFT NOV 2003 | ISO 16047 - FASTENERS - TORQUE/CLAMP FORCE TESTING |
| BS ISO 8820-5:2015 | Road vehicles. Fuse-links Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| 10/30234610 DC : DRAFT NOV 2010 | BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| I.S. EN ISO 898-2:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| 03/118014 DC : DRAFT DEC 2003 | ISO 7121 - METAL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
| BS ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A |
| PREN 3794 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF TORQUE STRENGTH ON THREADED FASTENERS |
| SAE USCAR35 | TEST PROCEDURES FOR EVALUATING BOLT-LOAD RETENTION OF MAGNESIUM ALLOYS |
| ISO 3800:1993 | Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results |
| I.S. EN ISO 16047:2005 | FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005) |
| ISO 15071:2011 | Hexagon bolts with flange — Small series — Product grade A |
| BS EN ISO 10683:2014 | Fasteners. Non-electrolytically applied zinc flake coatings |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| BIS IS 1364-6 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2 |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| DIN EN ISO 7719:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012) |
| DIN EN ISO 7040:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012) |
| 14/30278953 DC : 0 | BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| BS EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10 |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| ISO 4016:2011 | Hexagon head bolts — Product grade C |
| BS EN 14420-3:2013 | Hose fittings with clamp units Clamp units, bolted or pinned |
| I.S. EN ISO 4014:2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| I.S. EN ISO 4034:2012 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| I.S. EN ISO 4018:2011 | HEXAGON HEAD SCREWS - PRODUCT GRADE C |
| DIN EN ISO 4017:2015-05 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| DIN 4935-3:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 3: SIZES DN 500 TO DN 1000 FLANGED SCREENS WITH CONTINUOUS SLOT |
| DIN EN ISO 10683:2001-02 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| EN 50014:1997/A2:1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
| NBR 15926-2 : 2011 ERRATA 2011 | EQUIPMENT AMUSEMENT PARK - PART 2: SAFETY REQUIREMENTS PROJECT |
| NBR IEC 60079-0 : 2013 ERRATA 2 2016 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN 7989-1:2001-04 | Washers for steel structures - Part 1: Product grade C |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| 11/30229160 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| 12/30274606 DC : 0 | BS ISO 8820-5 - ROAD VEHICLES - FUSE-LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES |
| BS EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components |
| 13/30290650 DC : 0 | BS ISO 2725-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 2: MACHINE-OPERATED SOCKETS ('IMPACT') |
| DIN 83205:2002-08 | STAIRS AND GUARD RAILS FOR ENGINE ROOMS AND BOILER ROOMS IN SEAGOING SHIPS - GUARD RAILS |
| BIS IS 2577-5 : 2012 | ROAD VEHICLES - FUSE-LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES |
| 03/315782 DC : DRAFT SEP 2003 | BS ISO 8820-5 - ROAD VEHICLES - FUSE LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES |
| 16/30337580 DC : 0 | BS EN ISO 7040 - PREVAILING TORQUE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
| ASTM F 2437/F2437M : 2017 : REDLINE | Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
| PREN 3095 : 200P1 | AEROSPACE SERIES - SEALANTS - TEST METHODS - DETERMINATION OF EXTENDED ASSEMBLY TIME |
| DIN 16966-7:1995-04 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED POLYESTER RESINS - PART 7: BUSHINGS, FLANGES, FLANGED AND BUTT JOINTS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| BS EN 14592 : 2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| PREN 14399-10 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
| EN ISO 4017:2014 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| DIN EN ISO 17292:2016-05 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| DIN EN 1993-1-8:2010-12 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
| DIN EN ISO 8675:2016-05 (Draft) | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| DIN EN ISO 8765:2011-06 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| DIN EN ISO 8676:2011-07 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| DIN EN ISO 8673:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| BS EN ISO 4033:2012 | Hexagon high nuts (style 2). Product grades A and B |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0). Product grade B |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| I.S. EN 14399-3:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| I.S. EN ISO 7719:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012) |
| I.S. EN ISO 8673:2012 | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| DIN EN 14420-3:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN ISO 4036:2012 | HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012) |
| I.S. EN ISO 8676:2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| I.S. EN ISO 8675:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| I.S. EN ISO 4033:2012 | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
| I.S. EN ISO 4016:2011 | HEXAGON HEAD BOLTS - PRODUCT GRADE C |
| I.S. EN ISO 4017:2014 | FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014) |
| I.S. EN 15048-2:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| I.S. EN ISO 8765:2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| DIN EN 14399-3:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| I.S. EN ISO 7040:2012 | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012) |
| I.S. EN ISO 8674:2012 | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
| I.S. EN 14420-3:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN ISO 17292:2015 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| I.S. EN ISO 4035:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012) |
| VDI/VDE 2251 Blatt 1.1:2016-02 | Bolted joints - Tensioned joints - Precision engineering components |
| BS ISO 4162:2012 | Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B |
| BS ISO 2725-2:2017 | Assembly tools for screws and nuts. Square drive sockets Machine-operated sockets (\'impact\') |
| BS ISO 2725-3:2017 | Assembly tools for screws and nuts. Square drive sockets Machine-operated sockets (\'non-impact\') |
| IEEE 810-2015 | IEEE Standard for Hydraulic Turbine and Generator Shaft Couplings and Shaft Runout Tolerances |
| BS ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| BS 6104-2:1983 | Mechanical properties of fasteners Specification for nuts with specified proof load values |
| 15/30322555 DC : 0 | BS ISO 7121 - STEEL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
| 97/710376 DC : 0 | PREN 3095 - AEROSPACE SERIES - TEST METHODS FOR SEALANTS - DETERMINATION OF EXTENDED ASSEMBLY TIME |
| 15/30332551 DC : 0 | BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| BS ISO 2725-1:2017 | Assembly tools for screws and nuts. Square drive sockets Hand-operated sockets |
| 16/30327548 DC : DRAFT APR 2016 | BS ISO 2725-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 2: MACHINE-OPERATED SOCKETS ('IMPACT') |
| BS EN ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
| BS EN 50014:1998 | Electrical apparatus for potentially explosive atmospheres. General requirements |
| SAE USCAR11 | TORQUE-TENSION TESTING AND EVALUATION OF FASTENER FINISHES |
| ISO 4162:2012 | Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B |
| ISO 16047:2005 | Fasteners — Torque/clamp force testing |
| EN ISO 10683:2014 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| ISO 13584-511:2006 | Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
| EN 14399-7:2007 | High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| BIS IS 1363-1 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64) |
| ISO 2725-2:2017 | Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ("impact") |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| IEC 61241-0:2004 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| DIN EN ISO 4034:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| DIN EN ISO 8674:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
| BS EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B |
| ISO 4017:2014 | Fasteners — Hexagon head screws — Product grades A and B |
| BS EN ISO 4018:2011 | Hexagon head screws. Product grade C |
| EN ISO 4759-1:2000 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000) |
| DIN 6319 : 2007-01 | SPHERICAL WASHERS - CONICAL SEATS |
| ISO 8820-5:2015 | Road vehicles — Fuse-links — Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| ISO 2725-3:2017 | Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets ("non-impact") |
| 14/30290647 DC : 0 | BS ISO 2725-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 1: HAND-OPERATED SOCKETS |
| DIN 7989-2:2001-04 | Washers for steel structures - Part 2: Product grade A |
| I.S. 808:2002 | SPECIFICATION FOR CNG FUELLED VEHICLES |
| ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| DIN EN 14592:2012-07 | Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012) |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| 03/300201 DC : DRAFT FEB 2003 | IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| 10/30165712 DC : 0 | BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
| DIN 19207:2004-02 | Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories |
| 16/30337630 DC | BS EN ISO 7719. Prevailing torque (all-metal) hexagon regular nuts. Product grades A and B |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| BS EN 14399-7:2007 | High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut assemblies |
| BS EN ISO 16047 : 2005 | FASTENERS - TORQUE/CLAMP FORCE TESTING |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| I.S. EN 14592:2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| ISO 2725-1:2017 | Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A |
| DIN EN 15048-2:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| BS EN 14399-3:2015 | High-strength structural bolting assemblies for preloading System HR. Hexagon bolt and nut assemblies |
| BS EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| BS EN ISO 4014:2011 | Hexagon head bolts. Product grades A and B |
| BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0). Product grades A and B |
| BS EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread. Product grades A and B |
| BS EN ISO 4016:2011 | Hexagon head bolts. Product grade C |
| ISO 4034:2012 | Hexagon regular nuts (style 1) — Product grade C |
| BS EN 20898-2:1994 | Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
| BS EN ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B |
| BS EN 15048-2:2007 | Non-preloaded structural bolting assemblies Suitability test |
| ISO 4014:2011 | Hexagon head bolts — Product grades A and B |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread — Product grades A and B |
| ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) — Product grade B |
| BS EN ISO 4017:2014 | Fasteners. Hexagon head screws. Product grades A and B |
| 05/30134569 DC : DRAFT JUN 2005 | IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| BS EN 1993-1-8:2005 | Eurocode 3. Design of steel structures Design of joints |
| BS EN 1515-1:2000 | Flanges and their joints. Bolting Selection of bolting |
| ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 4018:2011 | Hexagon head screws — Product grade C |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread — Product grades A and B |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| BS EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread. Product grades A and B |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) |
| EN 14592:2008+A1:2012 | Timber structures - Dowel-type fasteners - Requirements |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| EN 1515-1:1999 | Flanges and their joints - Bolting - Part 1: Selection of bolting |
| EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) |
| EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| EN ISO 4033:2012 | Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012) |
| EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| EN 15048-2:2016 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| EN ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012) |
| EN 14399-3:2015 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
| EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| EN ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012) |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| DIN ISO 8820-5:2011-05 | ROAD VEHICLES - FUSE-LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES |
| I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| 16/30327545 DC : DRAFT APR 2016 | BS ISO 2725-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 1: HAND-OPERATED SOCKETS |
| 15/30332545 DC : 0 | BS EN 14399-7 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| DIN 87101:2003-10 | NON-RETURN FLAPS (STORM VALVES), SELF-CLOSING, VERTICAL TYPE, DN 50 UP TO DN 150, PN 1 - MATING DIMENSIONS FOR FLANGES ACCORDING TO PN 10 |
| PREN 14420-3 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| 14/30299749 DC : 0 | BS EN ISO 17292 - METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| BIS IS 15855 : 2010 | COTTON SEED DELINTING MACHINERY - SURGE BIN MACHINE - SPECIFICATION |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| 14/30301109 DC : 0 | BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
| DIN 3237-1:1994-10 | STRAIGHT PATTERN VALVES WITH FLANGE SOCKET IN MAIN POWER CONNECTION - PART 1: WITHOUT LINING |
| 05/30127446 DC : DRAFT JAN 2005 | ISO 13584-511 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS |
| PREN 3795 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF FREEDOM FROM EXCESSIVE CURE RATE |
| PREN 14399-7 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| I.S. EN 14399-7:2007 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| BIS IS 1363-3 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64) |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| I.S. EN 50180-2:2015 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN EN 14399-7:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| I.S. EN ISO 10683:2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| ISO 10683:2014 | Fasteners — Non-electrolytically applied zinc flake coatings |
| DIN EN ISO 4033:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
| BS EN ISO 4759-1:2001 | Tolerances for fasteners Bolts, screws, studs and nuts. Product grades A, B and C |
| BS EN ISO 4034:2012 | Hexagon regular nuts (style 1). Product grade C |
| BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
| BS EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B |
| BS EN ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert). Property classes 5, 8 and 10 |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| DIN EN ISO 4016:2011-06 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| DIN EN ISO 4036:2013-04 | HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012) |
| DIN EN ISO 4014:2011-06 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| DIN EN ISO 16047:2013-01 | Fasteners - Torque/clamp force testing (ISO 16047:2005 + Amd 1:2012) (includes Amendment :2012) |
| DIN EN ISO 898-2:2012-08 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| DIN EN ISO 4018:2011-07 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| SAE USCAR10-2 | TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP OF BOTH EXTERNAL AND INTERNAL METRIC THREADED FASTENERS |
| SAE USCAR11-1 | TORQUE-TENSION TESTING AND EVALUATION OF FASTENER FINISHES |
| UNE-EN ISO 898-2:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| I.S. EN 1993-1-8:2005 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS (INCLUDING IRISH NATIONAL ANNEX) |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| UNE-EN ISO 4035:2013 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| UNE-EN ISO 4033:2013 | Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012) |
| UNE-EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| UNE-EN ISO 8675:2013 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| UNE-EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
| UNE-EN ISO 4017:2015 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| UNE-EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| UNE-EN ISO 8673:2013 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| UNE-EN ISO 4036:2013 | Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012) |
| UNE-EN ISO 7040:2013 | Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) |
| UNE-EN 14399-3:2016 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
| UNE-EN 1993-1-8:2013 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| UNE-EN ISO 8674:2013 | Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012) |
| UNE-EN 15048-2:2017 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| UNE-EN 14420-3:2014 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| UNE-EN 14592:2009 | Timber structures - Dowel-type fasteners - Requirements |
| UNE-EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| UNE-EN ISO 17292:2016 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| UNE-EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| UNE-EN ISO 10683:2015 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| UNE-EN ISO 4034:2013 | Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012) |
| UNE-EN ISO 7719:2013 | Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) |
| UNE-EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| ASME B18.2.4.1M:2002 | METRIC HEX NUTS, STYLE 1 |
| ASME B18.2.4.1M : 2002 : R2007 | METRIC HEX NUTS, STYLE 1 |
| ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
| ISO 8839:1986 | Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread — Product grades A and B |
| ISO 10683:2014 | Fasteners — Non-electrolytically applied zinc flake coatings |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ISO 21670:2014 | Fasteners — Hexagon weld nuts with flange |
| ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 |
| ISO 4042:1999 | Fasteners — Electroplated coatings |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9 |
| ISO 4016:2011 | Hexagon head bolts — Product grade C |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 4034:2012 | Hexagon regular nuts (style 1) — Product grade C |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread — Product grades A and B |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| ISO 7043:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B |
| ISO 4015:1979 | Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter) |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 4017:2014 | Fasteners — Hexagon head screws — Product grades A and B |
| ISO 225:2010 | Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions |
| ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) — Product grade B |
| ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
| ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 |
| ISO 15071:2011 | Hexagon bolts with flange — Small series — Product grade A |
| ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 |
| ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
| ISO 12125:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| ISO 6157-2:1995 | Fasteners — Surface discontinuities — Part 2: Nuts |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12 |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| AS 3996:2019 | Access covers and grates |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| ISO 3269:2000 | Fasteners — Acceptance inspection |
| ISO 7044:2012 | Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B |
| ISO 4014:2011 | Hexagon head bolts — Product grades A and B |
| ISO 4018:2011 | Hexagon head screws — Product grade C |
| ISO 12126:2012 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B |
| ISO 4162:2012 | Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.