ISO 2859-2:1985
Withdrawn
Withdrawn
View Superseded by
Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
08-29-1985
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
Can be used when the switching rules in ISO 2859-1 are not applied. Indexing is by a preferred series of limiting qualities with a consumer's risk usually below 10 % and always below 13 %. Procedures are provided to cater for two situations: Procedure A to be used when the supplier and the consumer both wish to regard the lot in isolation (shall be used unless there is a specific instruction to use procedure B), procedure B to be used when the supplier regards the lot as one of continuing series but the consumer considers the lot received in isolation.
| Committee |
ISO/TC 69/SC 5
|
| DevelopmentNote |
Also numbered as BS 6001(1993). (06/2004) DRAFT ISO/DIS 2859-2 is also available for this standard. (11/2007)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| JIS Z 9015-2:1999 | Identical |
| BIS IS 2500-3 : 1995(R2004) | Identical |
| NBN ISO 2859 2 : 1993 | Identical |
| AS 1199.2-2003 | Identical |
| PN ISO 2859-2 : 1996 | Identical |
| NS ISO 2859-2 : 1ED 1985 | Identical |
| UNE 66020-2:2001 | Identical |
| DIN ISO 2859-2:1993-04 | Identical |
| UNE 66020-2:1988 | Identical |
| BS 6001-2:1984 | Similar to |
| UNE-ISO 2859-2:2012 | Identical |
| ISO 11596:2008 | Jewellery — Sampling of precious metal alloys for and in jewellery and associated products |
| CEI EN 62058-11 : 2011 | ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| ISO 2859-5:2005 | Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| BS ISO 3951-2:2013 | Sampling procedures for inspection by variables General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| PD CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity |
| DD CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity |
| BS ISO 3951-1:2013 | Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| VDE 0212-2 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| BS 6002-2:2007 | Sampling procedures for inspection by variables General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| BS ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| 12/30247200 DC : 0 | BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| I.S. EN 12206-1:2004 | PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
| 10/30219542 DC : 0 | BS 6001-1/A1 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| CEI EN 61897 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| BS ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principles (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| PD CR 13909:2002 | Identification card systems. Intersector thin flexible cards. Acceptance criteria |
| BS ISO 12686:1999 | Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish |
| BS ISO 3534-2:2006 | Statistics. Vocabulary and symbols Applied statistics |
| BS ISO 6305-2:2007 | Railway components. Technical delivery requirements Non-alloy carbon steel baseplates |
| CEI EN 60300-3-2 : 2006 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| CEI EN 61325 : 1998 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| I.S. EN 61325:1997 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| CEI EN 50365 : 2004 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| 17/30333593 DC : 0 | BS EN 17085 - PAPER AND BOARD - SAMPLING PROCEDURES FOR PAPER AND BOARD FOR RECYCLING |
| ISO 3951-5:2006 | Sampling procedures for inspection by variables — Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| I.S. EN 448:2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| DIN EN 12470-1:2009-11 | Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device |
| BS EN 12006-2 : 1998 | NON-ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| BS EN 326-3:2003 | Wood-based panels. Sampling, cutting and inspection Inspection of an isolated lot of panels |
| BS EN 12206-1:2004 | Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder |
| BS EN 12737 : 2004 | PRECAST CONCRETE PRODUCTS - FLOOR SLATS FOR LIVESTOCK |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| VDE 0212-3 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| DIN EN 12470-3:2000-04 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| EN 125000:1997 | Generic Specification: Cores made of ferrite materials |
| DIN EN ISO 186:2002-08 | Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002 |
| EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| EN 60300-3-2:2005 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity |
| EN 13549:2001 | Cleaning services - Basic requirements and recommendations for quality measuring systems |
| EN 61284:1997 | Overhead lines - Requirements and tests for fittings |
| EN 12470-2:2000+A1:2009 | Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers |
| EN 12470-3:2000+A1:2009 | Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device |
| EN 12470-1:2000+A1:2009 | Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device |
| DIN EN ISO 4527:2003-10 | METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS |
| EN 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS 6001-0:2006 | Sampling procedures for inspection by attributes Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes |
| ENV 1401-2:2000 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
| BS 6001-0(2017) : 2017 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES |
| 14/30294476 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| I.S. EN 12470-5:2003 | CLINICAL THERMOMETERS - PART 5: PERFORMANCE OF INFRA-RED EAR THERMOMETERS (WITH MAXIMUM DEVICE) |
| BS EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| BS EN 50397-2:2009 | Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC Accessories for covered conductors. Tests and acceptance criteria |
| S.R. CR 13909:2000 | IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - ACCEPTANCE CRITERIA |
| BS EN 350:2016 | Durability of wood and wood-based products. Testing and classification of the durability to biological agents of wood and wood-based materials |
| EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| 03/312758 DC : DRAFT AUG 2003 | ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE |
| BS ISO 28590:2017 | Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| BS ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| 07/30161646 DC : 0 | BS EN 15646 - ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 125000:1999 | CORES MADE FROM FERRITE MATERIALS (GENERIC SPECIFICATION) |
| NF EN 61854 : 2001 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| I.S. EN 62058-11:2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| CEI EN 61854 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| I.S. EN 61897:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| I.S. EN 61193-3:2013 | QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV)) |
| I.S. EN 60300-3-2:2005 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| PREN 448 : DRAFT 2018 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| S.R. CEN/TS 1401-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011) |
| NF EN 50365 : 2002 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| I.S. CEN TS 1555-7:2003 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| NF EN 12206-1 : 2011 | PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
| DIN EN 12470-2:2009-11 | Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers (includes Amendment A1:2009) |
| DIN EN 326-3:2004-02 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| DIN EN ISO 4589-2:2016-03 (Draft) | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| BS EN ISO 4527:2003 | Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
| IEC 62058-11:2008 | Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods |
| EN 61854:1998 | Overhead lines - Requirements and tests for spacers |
| BS EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers Evaluation of conformity and sampling |
| IEC 61897:1998 | Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers |
| BS EN 12470-3 : 2000 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| DIN EN 12470-5:2003-09 | CLINICAL THERMOMETERS - PART 5: PERFORMANCE OF INFRA-RED EAR THERMOMETERS (WITH MAXIMUM DEVICE) |
| DIN EN 12470-4:2001-02 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| DIN EN 12206-1:2004-09 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| I.S. EN 295-2:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| DIN EN 61897 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| I.S. EN ISO 4589-2:2017 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| I.S. EN 326-3:2003 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 3: INSPECTION OF AN ISOLATED LOT OF PANELS |
| I.S. EN 12470-2:2000 | CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| I.S. EN 12470-1:2000 | CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE |
| I.S. EN ISO 1461:2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| I.S. EN 12737:2004 | PRECAST CONCRETE PRODUCTS - FLOOR SLATS FOR LIVESTOCK |
| DIN EN 61284:1998-05 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| BS 6000:1996 | Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots |
| BS 6002-1:2007 | Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| VDE 0212-1:1998-05 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| NF EN 62058-11 : 2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| BS ISO/TR 12031:2000 | Micrographics. Inspection of silver-gelatin microforms for evidence of deterioration |
| BIS IS 2500-1 : 2000(R2017) | SAMPLING PROCEDURE FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| BS EN 62058-11:2010 | Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods |
| 15/30312397 DC : 0 | BS EN 16866 - METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
| BS ISO 7198:1998 | Cardiovascular implants. Tubular vascular prostheses |
| DIN EN 61854 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| 97/101296 DC : DRAFT FEB 1997 | PREN 12737 - PRECAST CONCRETE FLOOR SLATS FOR LIVESTOCK |
| 07/30167025 DC : 0 | BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
| DIN EN ISO 17668:2016-06 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| BS ISO 10587:2000 | Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method |
| 04/19983407 DC : DRAFT OCT 2004 | BS 6001-10 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 10: OVERVIEW OF THE BS 6001 (ISO 2859) ATTRIBUTE SAMPLING SYSTEMS |
| BS ISO 4589-2 : 1996 AMD 10627 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - AMBIENT-TEMPERATURE TEST |
| BS 6001-0:1996 | Sampling procedures for inspection by attributes Introduction to the BS 6001 attribute sampling system |
| 02/121776 DC : DRAFT APR 2002 | PREN 14403 - SAMPLING OF THE PRECIOUS METAL ALLOYS IN JEWELLERY AND ASSOCIATED PRODUCTS |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| 14/30312373 DC : 0 | BS EN 350 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - TESTING AND CLASSIFICATION OF THE RESISTANCE TO BIOLOGICAL AGENTS, THE PERMEABILITY TO WATER AND THE PERFORMANCE OF WOOD AND WOOD-BASED MATERIALS |
| BS EN 125000:1998 | Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials |
| BS EN 61193-3:2013 | Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS EN 60383-1:1998 | Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria |
| BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
| I.S. EN 16866:2017 | METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
| DD ENV 1401-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity |
| I.S. EN ISO 17668:2016 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| I.S. EN 61854:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach |
| NF EN 61284 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| ISO/TR 8550-1:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 1: Acceptance sampling |
| ISO/TR 8550-2:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 2: Sampling by attributes |
| ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity |
| ISO 2859-0:1995 | Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system |
| DIN EN 12737:2008-02 | PRECAST CONCRETE PRODUCTS - FLOOR SLATS FOR LIVESTOCK |
| DIN EN 12470-3:2009-11 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| DIN EN 12470-4:2009-11 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| DIN EN 295-2:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| DIN EN 448:2016-02 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 13549:2001 | Cleaning services. Basic requirements and recommendations for quality measuring systems |
| ISO 17668:2016 | Zinc diffusion coatings on ferrous products — Sherardizing — Specification |
| BS EN 12470-5:2003 | Clinical thermometers Performance of infra-red ear thermometers (with maximum device) |
| GEIA TA HB 0009 : 2013 | RELIABILITY PROGRAM HANDBOOK |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| I.S. EN 12006-2:1998 | NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| BS 4778-2:1991 | Quality vocabulary Quality concepts and related definitions |
| 03/102273 DC : DRAFT MAR 2003 | BS ISO 13448-0 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION OF PRIORITIES PRINCIPLES (APP) - PART 1: GUIDELINES FOR THE APP APPROACH |
| PD CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| BS ISO 11596:2008 | Jewellery. Sampling of precious metal alloys for and in jewellery and associated products |
| 16/30319043 DC : 0 | BS EN ISO 4589-2 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST |
| PREN 295-2 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| BS 5341-6.5:1992 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabularly, inspection methods and generic specifications. Quality requirements |
| BS EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products. Sherardizing. Specification |
| 10/30216987 DC : 0 | BS EN 295-2 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| OIML G 20 : 2017 | SURVEILLANCE OF UTILITY METERS IN SERVICE ON THE BASIS OF SAMPLING INSPECTIONS |
| 04/30119227 DC : DRAFT SEP 2004 | BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| 94/110814 DC : DRAFT JAN 1995 | ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS |
| DD CEN/TS 1555-7:2003 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
| 03/108624 DC : DRAFT JULY 2003 | IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| 16/30340580 DC : 0 | BS EN 17009 - FLOORING OF LIGNIFIED MATERIALS OTHER THAN WOOD - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 60300-3-2:2005 | Dependability management Application guide. Collection of dependability data from the field |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| 07/30165568 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| BS 6002-4:2006 | Sampling procedures for inspection by variables Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| 07/30168266 DC : 0 | BS ISO 27830 - METALLIC AND OTHER INORGANIC COATINGS - STANDARD GUIDE FOR SPECIFYING SUCH COATINGS |
| ISO 3951-2:2013 | Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| CR 13909:2000 | Identification card systems - Intersector thin flexible cards - Acceptance criteria |
| S.R. CEN/TS 13476-4:2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO 2859-10:2006 | Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| ISO/TR 8550-3:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 3: Sampling by variables |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| IEC 61854:1998 | Overhead lines - Requirements and tests for spacers |
| DIN EN 10242:1995-03 | Threaded pipe fitting in malleable cast iron |
| DIN EN ISO 1461:2009-10 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| BS EN ISO 4589-2:2017 | Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| BS EN 12470-4 : 2001 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| IEC 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS EN 12470-2 : 2001 | CLINICAL THERMOMETERS - PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| BS EN ISO 186:2002 | Paper and board. Sampling to determine average quality |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
| BS EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects |
| EN 16866:2017 | Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016) |
| EN ISO 186:2002 | Paper and board - Sampling to determine average quality (ISO 186:2002) |
| EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
| EN 12006-2:1998+A1:2009 | Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 2: Vascular prostheses including cardiac valve conduits |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 12470-4:2000+A1:2009 | Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement |
| EN 350:2016 | Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials |
| EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| EN 448:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
| EN ISO 17526:2003 | Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003) |
| EN ISO 4527:2003 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
| EN 13628-2:2002 | Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods |
| ISO 6305-2:2007 | Railway components — Technical delivery requirements — Part 2: Non-alloy carbon steel baseplates |
| BS EN 61854:1998 | Overhead lines. Requirements and tests for spacers |
| 12/30245656 DC : 0 | ISO/DIS 3951-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| CEI EN 50397-2 : 2011 | COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA |
| NF EN 61897 : 2001 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| BS EN 61897:1999 | Overhead lines. Requirements and tests for Stockbridge type aeolian vibration dampers |
| 04/30110040 DC : DRAFT FEB 2004 | BS 6001-4 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 4: SYSTEM OF SEQUENTIAL SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| 14/30256684 DC : 0 | BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION |
| BS EN 61284:1998 | Overhead lines. Requirements and tests for fittings |
| ISO/TR 12031:2000 | Micrographics — Inspection of silver-gelatin microforms for evidence of deterioration |
| BS EN 16866:2017 | Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| BS ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| S.R. CEN ISO/TS 22391-7:2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011) |
| SAE ARP9013 | Statistical Product Acceptance Requirements |
| 00/564528 DC : DRAFT SEP 2000 | BS EN 13975 - SAMPLING PROCEDURES USED FOR ACCEPTANCE TESTING OF INVITRO DIAGNOSTIC MEDICAL DEVICES - STATISTICAL ASPECTS |
| 07/30152250 DC : 0 | BS ISO 11596 - SAMPLING OF THE PRECIOUS METAL ALLOYS FOR AND IN JEWELLERY AND ASSOCIATED PRODUCTS |
| I.S. EN 50397-2:2009 | COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA |
| I.S. EN 50365:2002 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| 18/30368651 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
| I.S. EN 350:2016 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - TESTING AND CLASSIFICATION OF THE DURABILITY TO BIOLOGICAL AGENTS OF WOOD AND WOOD-BASED MATERIALS |
| SAE ARP9013/1 | Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods |
| ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach |
| BS EN 448:2015 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| DIN EN 12006-2:2009-08 | NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| BS EN 13628-2:2002 | Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography Industrial methods |
| BS EN 12470-1 : 2000 | CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE |
| ISO 4527:2003 | Metallic coatings — Autocatalytic (electroless) nickel-phosphorus alloy coatings — Specification and test methods |
| EN 61897:1998 | Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| BS 6001-1(1999) : 1999 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| EN 12737:2004+A1:2007 | Precast concrete products - Floor slats for livestock |
| EN 12470-5:2003 | Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) |
| EN 62058-11:2010 | Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods |
| EN 61325:1995 | Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria |
| BS 6001-4:2005 | Sampling procedures for inspection by attributes System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| EN 50397-2:2009 | Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria |
| UNE-ISO 3951-2:2012 | Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| UNE-ISO 3951-1:2012 | Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| UNE-ISO 2859-1:2012 | Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| UNE-EN 62058-11:2011 | Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods |
| UNE-ISO 2859-10:2013 | Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| UNE-EN 350:2016 | Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials |
| UNE-ISO 2859-5:2014 | Sampling procedures for inspection by attributes. Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| UNE-ISO 3534-2:2013 | Statistics -- Vocabulary and symbols -- Part 2: Applied statistics |
| UNE-EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| UNE-EN 448:2017 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| UNE-EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| BS 627(1991) : 1991 AMD 8670 | METHODS FOR SAMPLING OF ANIMAL AND VEGETABLE FATS AND OILS |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.