ISO/IEC Guide 65:1996
Withdrawn
Withdrawn
View Superseded by
General requirements for bodies operating product certification systems
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
06-27-1996
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
Specifies general requirements for third-party operating a product certification system. Replaces ISO/IEC Guide 40:1983.
| Committee |
ISO/CASCO
|
| DevelopmentNote |
Supersedes ISO GUIDE 40 (04/2001)
|
| DocumentType |
Guide
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| EN 45011:1998 | Identical |
| GOST ISO/IEC GUIDE 65 : 2012 | Identical |
| NS EN 45011 : 2ED 1998 | Identical |
| I.S. EN 45011:1998 | Identical |
| SAC GB/T 27065 : 2015 | Identical |
| AS/NZS 3843:1998 | Identical |
| BIS IS/ISO/IEC GUIDE 65 : 1996 | Identical |
| EN 45011 : 1998 | Identical |
| DIN EN 45011:1990-05 | Identical |
| SAA/SNZ HB18.65:1998 | Identical |
| JIS Q 0065:1997 | Identical |
| UNE-EN 45011:1998 | Identical |
| GOST R ISO/IEC 65 : 2000 | Identical |
| S.R. CWA 15896-2:2008 | VALUE ADDED PURCHASING MANAGEMENT - PART 2: ACCREDITED STRUCTURE AND PROCESS FOR CERTIFICATION BODIES |
| S.R. CEN/TS 12666-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| DIN V 1201:2004-08 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
| 03/307701 DC : DRAFT JUNE 2003 | ISO/IEC 17000 - CONFORMITY ASSESSMENT - GENERAL VOCABULARY |
| 10/30206406 DC : 0 | BS EN 16214-2 - SUSTAINABLY PRODUCED BIOMASS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS FOR BIOFUELS AND BIOLIQUIDS - PART 2: CONFORMITY ASSESSMENT, INCLUDING CHAIN OF CUSTODY AND MASS BALANCE |
| DD CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity |
| 04/30103162 DC : DRAFT MARCH 2004 | EN 12094-5 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5 - REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALUES AND THEIR ACTUATORS |
| S.R. CEN TR 15840:2009 | EVALUATION OF CONFORMITY OF FLY ASH FOR CONCRETE - GUIDELINES FOR THE APPLICATION OF EN 450-2 |
| 03/317039 DC : DRAFT NOV 2003 | ISO/IEC GUIDE 28 - CONFORMITY ASSESSMENT - GUIDANCE ON A THIRD-PARTY CERTIFICATION SYSTEM FOR PRODUCTS |
| CEI EN 61400-22 : 2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| PREN 14141 : DRAFT 2011 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| BS ISO 12576-2:2008 | Thermal insulation products. Conformity control systems In-situ products |
| DD CEN/TS 12666-2:2005 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| PD ISO/IEC Guide 68:2002 | Arrangements for the recognition and acceptance of conformity assessment results |
| I.S. EN ISO/IEC 17050-1:2010 | CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| BS EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
| 03/317040 DC : DRAFT NOV 2003 | ISO/IEC GUIDE 67 - FUNDAMENTALS OF PRODUCT CERTIFICATION |
| DD ENV 1329-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| 12/30255477 DC | BS ISO 13608. Decorative veneered plywood |
| DD CEN ISO/TS 14907-1:2010 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| PD CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity |
| CEI UNI 70018 : 2009 | CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| DD ENV 1453-2:2001 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| PD CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| 03/319521 DC : DRAFT NOV 2003 | ISO/IEC 17040 - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES |
| BS EN ISO/IEC 17050-1:2010 | Conformity assessment. Suppliers declaration of conformity General requirements |
| S.R. CEN/TS 13598-3:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| CEI UNI 70019 : 2008 | CONFORMITY ASSESSMENT ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS |
| EN 1279-6:2002 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
| DIN EN 15655:2016-07 (Draft) | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| CEN/TR 16017:2010 | Guide to the use of EN 598 |
| ISO/IEC 17000:2004 | Conformity assessment — Vocabulary and general principles |
| S.R. CEN/TS 1566-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 1329-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| 16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
| ISO 18776:2008 | Laminated veneer lumber (LVL) — Specifications |
| DD CEN/TS 14632:2006 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity |
| IECQ 03-6:2012 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 6: IECQ ITL SCHEME - INDEPENDENT TESTING LABORATORY ASSESSMENT PROGRAM REQUIREMENTS |
| DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| EN ISO/TS 15874-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| NFPA 1986 : 2017 | RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS |
| BS EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| BS EN 13980:2002 | Potentially explosive atmospheres. Application of quality systems |
| BS EN 12094-2:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices |
| BS EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks General |
| BS EN 450-2:2005 | Fly ash for concrete Conformity evaluation |
| BS EN 15038:2006 | Translation services. Service requirements |
| BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 12094-8:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors |
| BS EN 12094-13:2001 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves |
| BS EN 13616:2004 | Overfill prevention devices for static tanks for liquid petroleum fuels |
| EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
| CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity |
| EN 50518-3:2013 | Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation |
| CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity |
| CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity |
| EN 12094-11:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices |
| DIN EN 12094-9:2003-07 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 9: REQUIREMENTS AND TEST METHODS FOR SPECIAL FIRE DETECTORS |
| CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity |
| CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity |
| EN 12094-12:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices |
| EN ISO/IEC 17050-1:2010 | Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) |
| EN 12094-2:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
| EN 12094-8:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
| EN 12094-10:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches |
| DIN EN 15189:2007-02 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| EN 12094-6:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
| 13/30246894 DC : 0 | BS EN ISO 17100 - TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES |
| 04/30103157 DC : DRAFT MARCH 2004 | BS EN 12094-8 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8 - REQUIREMENTS AND TEST METHODS FOR FLEXIBLE CONNECTORS |
| PD ISO/IEC Guide 67:2004 | Conformity asessment. Fundamentals of product certification |
| OIML B 10-2 : 2004 | CHECKLISTS FOR ISSUING AUTHORITIES AND TESTING LABORATORIES CARRYING OUT OIML TYPE EVALUATIONS |
| S.R. CEN ISO/TS 22391-7:2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011) |
| I.S. EN ISO 21898:2005 | PACKAGING - FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBCS) FOR NON-DANGEROUS GOODS |
| BS EN ISO 17100 : 2015 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES |
| PD CEN/TR 15545:2006 | Guide to the use of EN 545 |
| 04/30103167 DC : DRAFT MARCH 2004 | BS EN 12094-6 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6 - REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES FOR CO2 SYSTEMS |
| 11/30218121 DC : 0 | BS EN 15085-1:2007/A1 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL |
| PD CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity |
| PD CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity |
| ISO/IEC TR 14516:2002 | Information technology — Security techniques — Guidelines for the use and management of Trusted Third Party services |
| BS EN ISO/IEC 17040:2005 | Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies |
| 03/102154 DC : DRAFT MAY 2003 | CEN TS 14632 - PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 10/30216654 DC : 0 | BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| 12/30254896 DC : 0 | BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION |
| PD CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity |
| FD ISO/IEC GUIDE 28 : 2006 FD | CONFORMITY ASSESSMENT - GUIDANCE ON A THIRD-PARTY CERTIFICATION SYSTEM FOR PRODUCTS |
| 13/30286132 DC : 0 | BS EN 13616-2 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT CLOSURE DEVICE |
| 00/541127 DC : DRAFT AUG 2000 | BS EN 13980 - POTENTIALLY EXPLOSIVE ATMOSPHERES - APPLICATION OF QUALITY SYSTEMS |
| DD ENV 1451-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity |
| PD IEC TR 62248:2002 | Approaches to conformance and certification testing for design automation standards |
| 04/30117386 DC : DRAFT JUL 2004 | EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| PREN 50518-3 : DRAFT 2009 | MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
| CEI UNI EN ISO/IEC 17050-1 : 2010 | CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| CEI UNI EN ISO/IEC 17040 : 2008 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES |
| DD CEN/TS 12201-7:2003 | Plastics piping systems for water supply. Polyethylene (PE) Guidance for the assessment of conformity |
| ASTM D 7793 : 2017 : REDLINE | Standard Specification for Insulated Vinyl Siding |
| NFPA 790 : 2018 | COMPETENCY OF THIRD-PARTY FIELD EVALUATION BODIES |
| I.S. EN ISO/IEC 17065:2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES (ISO/IEC 17065:2012) |
| I.S. EN ISO 17100:2015 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES (ISO 17100:2015) |
| S.R. CEN/TS 14632:2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CEN/TS 1456-2:2003 | Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| ISO/IEC 17007:2009 | Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment |
| DIN EN ISO/IEC 17000:2005-03 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| S.R. CEN/TS 16214-2:2014 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 2: CONFORMITY ASSESSMENT INCLUDING CHAIN OF CUSTODY AND MASS BALANCE |
| S.R. CEN/TS 1401-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| S.R. CEN ISO TS 21003-7:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DD CEN/TS 1456-2:2003 | Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011) |
| ISO 13609:2014 | Wood-based panels — Plywood — Blockboards and battenboards |
| IECQ 03-3:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME |
| ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity |
| CEI UNI EN ISO/IEC 17000 : 2011 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity |
| ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) — Part 3: Global conformity assessment procedures (GCAP) — Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| I.S. EN ISO/IEC 17040:2005 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES |
| IECQ 03-3-1:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3-1: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME, IECQ APPROVED COMPONENT-TECHNOLOGY CERTIFICATION (IECQ AC-TC) |
| NFPA 1952 : 2015 | SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT |
| DIN EN ISO 21898:2005-12 | Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004) |
| DIN EN 12839:2012-03 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN 1916:2003-04 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 12842:2012-11 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| DIN EN 1917:2003-04 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 598:2009-10 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
| BS EN 598 : 2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 12839:2012 | Precast concrete products. Elements for fences |
| BS EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) - Part 2: Guidance for the assessment of conformity |
| I.S. EN 598:2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 969:2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12842:2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13616:2004-09 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| DIN EN 12094-8:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
| I.S. EN 545:2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12094-8:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
| ANSI/NEMA SG-IC 1:2013 | Smart Grid Interoperable & Conformant (SG-IC) Testing and Certification Scheme Operator Guidelines |
| OIML B 10 : 2011 AMD 2012 | FRAMEWORK FOR A MUTUAL ACCEPTANCE ARRANGEMENT ON OIML TYPE EVALUATIONS |
| PREN 12842 : DRAFT 2010 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 450-2:2005 | FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| 02/121563 DC : DRAFT APR 2002 | BS EN 14409-1 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| DD ENV 1852-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
| NFPA 1851 : 2014 | SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR STRUCTURAL FIRE FIGHTING AND PROXIMITY FIRE FIGHTING |
| BS EN ISO/IEC 17000:2004 | Conformity assessment. Vocabulary and general principles |
| 09/30183531 DC : 0 | BS EN 50518-3 - MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
| BS ISO/IEC TR 14516:2002 | Information technology. Security techniques. Guidelines for the use and management of trusted third party services |
| NFPA 1984 : 2016 | RESPIRATORS FOR WILDLAND FIRE-FIGHTING OPERATIONS |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| 08/30139611 DC : DRAFT JUNE 2008 | BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| 12/30257189 DC | BS ISO 13609. Blockboards and battenboards |
| CLC/TR 50090-9-2:2007 | Home and Building Electronic Systems (HBES) - Part 9-2: Installation requirements - Inspection and testing of HBES installation |
| PD CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for assessment of conformity |
| DIN EN ISO 17100:2016-05 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES (ISO 17100:2015/AMD.1:2017) |
| BS 8577:2012 | Framework for the provision of financial advice and planning services. Specification |
| ASTM E 1906 : 1999 | Standard Guide for General Requirements for Bodies Operating Product Certification Systems (Withdrawn 2004) |
| I.S. CEN TS 12666-2:2006 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD IEC WT 01:2001 | IEC system for conformity testing and certification of wind turbines. Rules and procedures |
| S.R. CEN/TS 1565-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
| DD ENV 1519-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Guidance for the assessment of conformity |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| S.R. CEN/TS 1455-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DD ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Certification and accreditation requirements |
| 03/307737 DC : DRAFT JUNE 2003 | ISO/IEC 17050-1 - CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| EN ISO/TS 15876-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO/IEC TR 15443-3:2007 | Information technology — Security techniques — A framework for IT security assurance — Part 3: Analysis of assurance methods |
| ISO/TS 21003-7:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity |
| CEI UNI ISO/IEC 17007 : 2012 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| DD ENV 1401-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity |
| NFPA 1951 : 2013 | PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| CEI UNI EN ISO/IEC 17011 : 2008 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES |
| ACI 423.7 : 2014 | SPECIFICATION FOR UNBONDED SINGLE-STRAND TENDON MATERIALS |
| CEN ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2009) |
| S.R. CEN/TS 1519-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| OIML B 3 : 2011 | OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS |
| PREN 197-2 : DRAFT 2012 | CEMENT - PART 2: CONFORMITY EVALUATION |
| DD CEN ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity |
| ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity |
| ISO/IEC Guide 28:2004 | Conformity assessment — Guidance on a third-party certification system for products |
| ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 7: Guidance for the assessment of conformity |
| CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003) |
| I.S. EN 15655:2009 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| S.R. CR 14245:2001 | GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION' |
| IECQ 03-1:2012 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 1: GENERAL REQUIREMENTS FOR ALL IECQ SCHEMES |
| I.S. EN 50380:2017 | MARKING AND DOCUMENTATION REQUIREMENTS FOR PHOTOVOLTAIC MODULES |
| I.S. EN 1917:2002 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods |
| BS EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods |
| ISO 21469:2006 | Safety of machinery — Lubricants with incidental product contact — Hygiene requirements |
| BS EN 12094-16:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for odorizing devices for CO<sub>2</sub> low pressure systems |
| CEN/TS 16214-2:2014 | Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance |
| ASTM E 2634 : 2017-06 | SPECIFICATION FOR FLAT WALL INSULATING CONCRETE FORM (ICF) SYSTEMS |
| EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks - Part 1: General |
| EN ISO/IEC 17040:2005 | Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005) |
| I.S. EN 14525:2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
| BS EN ISO 14024:2001 | Environmental labels and declarations. Type I environmental labelling. Principles and procedures |
| BS EN ISO/IEC 17030:2009 | Conformity assessment. General requirements for third-party marks of conformity |
| PD CEN/TS 16214-2:2014 | Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers Conformity assessment including chain of custody and mass balance |
| DD CEN/TS 1852-2:2009 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
| DD CEN/TS 14758-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD) Guidance for the assessment of conformity |
| PD ISO/IEC GUIDE 28:2004 | Conformity assessment. Guidance on a third-party certification system for products |
| IEC TR 62248:2002 | Approaches to conformance and certification testing for automation standards |
| CEI UNI EN ISO/IEC 17030 : 2009 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR THIRD-PARTY MARKS OF CONFORMITY |
| 10/30214970 DC : 0 | BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| I.S. EN 13616:2004 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| 11/30248438 DC : 0 | BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| 13/30286135 DC : 0 | BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| PD CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2 |
| PD CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylen (PE) Guidance for the assessment of conformity |
| BS EN 15655:2009 | Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods |
| DD ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| DD CEN ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance for the assessment of conformity |
| DD CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance for the assessment of conformity |
| 05/30133451 DC : 0 | EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS |
| 04/30108568 DC : 0 | ISO/IEC GUIDE 60 - CODE OF GOOD PRACTICE FOR CONFORMITY ASSESSMENT |
| DD CEN ISO/TS 21003-7 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 15267-1:2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES |
| OIML B 10-1 : 2004 | FRAMEWORK FOR A MUTUAL ACCEPTANCE ARRANGEMENT ON OIML TYPE EVALUATIONS |
| ISO/IEC Guide 53:2005 | Conformity assessment — Guidance on the use of an organization's quality management system in product certification |
| S.R. CEN/TS 13476-4:2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO/IEC Guide 68:2002 | Arrangements for the recognition and acceptance of conformity assessment results |
| ISO 12576-2:2008 | Thermal insulation products — Conformity control systems — Part 2: In-situ products |
| ISO 10381-1:2002 | Soil quality — Sampling — Part 1: Guidance on the design of sampling programmes |
| NSF 347 : 2012 | SUSTAINABILITY ASSESSMENT FOR SINGLE PLY ROOFING MEMBRANES |
| BS EN 50518-3:2013 | Monitoring and alarm receiving centre Procedures and requirements for operation |
| I.S. EN ISO/IEC 17000:2004 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2 |
| ISO/TR 12662:1997 | Certification scheme for prestressing steels |
| ISO/IEC Guide 67:2004 | Conformity assessment — Fundamentals of product certification |
| I.S. CWA 15554:2006 | SPECIFICATIONS FOR A WEB ACCESSIBILITY CONFORMITY ASSESSMENT SCHEME AND A WEB ACCESSIBILITY QUALITY MARK |
| I.S. EN ISO/IEC 17030:2009 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR THIRD-PARTY MARKS OF CONFORMITY |
| I.S. EN 12839:2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN 969:2009-07 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
| DIN EN 12094-8:2016-06 (Draft) | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
| ISO 21898:2004 | Packaging — Flexible intermediate bulk containers (FIBCs) for non-dangerous goods |
| BS EN 12094-12:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pneumatic alarm devices |
| BS EN 12094-6:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical disable devices |
| BS EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| BS EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| 15/30324856 DC : 0 | BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| BS EN ISO 21898:2005 | Packaging. Flexible intermediate bulk containers (FIBCs) for non-dangerous goods |
| EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
| BS EN 45010:1998 | General requirements for assessment and accreditation of certification systems |
| BS EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks General |
| BS EN 12094-4:2004 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for container valve assemblies and their actuators |
| ISO/IEC 17030:2003 | Conformity assessment — General requirements for third-party marks of conformity |
| BS EN 12094-11:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for mechanical weighing devices |
| BS EN 12094-10:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pressure gauges and pressure switches |
| BS EN 12094-9:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for special fire detectors |
| BS EN 12094-1:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for electrical automatic control and delay devices |
| ISO/IEC 17040:2005 | Conformity assessment — General requirements for peer assessment of conformity assessment bodies and accreditation bodies |
| ASTM E 2924 : 2014 | Standard Practice for Intumescent Coatings |
| CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
| BS EN 12101-1 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS |
| ISO/IEC 17050-1:2004 | Conformity assessment — Supplier's declaration of conformity — Part 1: General requirements |
| BS EN 1917:2002 | Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
| EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks - Part 1: General |
| EN 450-2:2005 | Fly ash for concrete - Part 2: Conformity evaluation |
| EN ISO 21469:2006 | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006) |
| EN 15038:2006 | Translation services - Service requirements |
| EN ISO 21898:2005 | Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004) |
| EN 13980:2002 | Potentially explosive atmospheres - Application of quality systems |
| EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
| CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity |
| EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation |
| EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement |
| EN ISO/TS 15877-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| EN 15267-1:2009 | Air quality - Certification of automated measuring systems - Part 1: General principles |
| I.S. CEN TR 15545:2006 | GUIDE TO THE USE OF EN 545 |
| PD CEN/TR 16017:2010 | Guide to the use of EN 598 |
| PD ISO/IEC TR 15443-3:2007 | Information technology. Security techniques. A framework for IT security assurance Analysis of assurance methods |
| NF EN 61400-22:2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| DD CEN/TS 13476-4:2008 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| 16/30276974 DC : 0 | BS ISO/IEC 24709-1 - INFORMATION TECHNOLOGY - CONFORMANCE TESTING FOR BIOAPI - PART 1: METHODS AND PROCEDURES |
| I.S. CEN TS 14632:2006 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 15038:2006 | TRANSLATION SERVICES - SERVICE REQUIREMENTS |
| I.S. EN 14409-1:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| PD CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity |
| CEI UNI EN 50518-3 : 2015 | MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
| I.S. CEN ISO TS 14907-1:2005 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES |
| DD CEN/TS 13244-7:2003 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| BS ISO/IEC 18009:1999 | Information technology. Programming languages. Ada: conformity assessment of a language processor |
| 08/30181473 DC : DRAFT JULY 2008 | BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| BIP 2206:2012 | Quality in market research from theory to practice |
| 07/30163668 DC : 0 | BS EN 12839 - PRECAST CONCRETE PRODUCTS - ELEMENTS OF FENCES |
| PD CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene-copolymer blends (SAN+PVC) Guidance for the assessment of conformity |
| I.S. EN 50518-3:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
| DD ENV 1455-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS) Guidance for the assessment of conformity |
| BS ISO 10381-1:2002 | Soil quality. Sampling Guidance on the design of sampling programmes |
| 12/30217447 DC : 0 | BS ISO 13611 - INTERPRETING - GUIDELINES FOR COMMUNITY INTERPRETING |
| ANSI INCITS 429:2008(R2018) | INFORMATION TECHNOLOGY - CONFORMANCE TESTING METHODOLOGY FOR ANSI INCITS 358-2002, BIOAPI SPECIFICATION |
| DD CEN/TS 12200-2:2003 | Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| PD ISO/IEC Guide 53:2005 | Conformity assessment. Guidance on the use of an organization\'s quality management system in product certification |
| 04/30107387 DC : DRAFT JUN 2004 | ISO/IEC GUIDE 53 - CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| INCITS/ISO/IEC 24709-1 : 2009 | INFORMATION TECHNOLOGY - CONFORMANCE TESTING FOR THE BIOMETRIC APPLICATION PROGRAMMING INTERFACE (BIOAPI) - PART 1: METHODS AND PROCEDURES |
| NFPA 1975 : 2014 | EMERGENCY SERVICES WORK CLOTHING ELEMENTS |
| ISO 12465:2007 | Plywood — Specifications |
| 04/30095858 DC : DRAFT AUG 2004 | BS ISO 21469 - SAFETY OF MACHINERY - LUBRICANTS WITH INCIDENTAL PRODUCT CONTACT - HYGIENE REQUIREMENTS |
| BS EN 15267-1:2009 | Air quality. Certification of automated measuring systems General principles |
| DIN EN 15267-1:2009-07 | Air quality - Certification of automated measuring systems - Part 1: General principles |
| IECQ 03-2:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 2: IECQ APPROVED PROCESS SCHEME |
| BS EN 1279-6:2002 | Glass in building. Insulating glass units Factory production control and periodic tests |
| S.R. CEN/TS 1555-7:2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. TR 50090-9-2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION |
| S.R. CEN TR 16017:2010 | GUIDE TO THE USE OF EN 598 |
| ISO 17100:2015 | Translation services — Requirements for translation services |
| ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity |
| S.R. CEN/TS 1451-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DD CEN ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance for the assessment of conformity |
| PD CEN/TS 1329-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| ISO/IEC Guide 60:2004 | Conformity assessment — Code of good practice |
| CEN/TR 15545:2006 | Guide to the use of EN 545 |
| NFPA 1981 : 2013 | OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES |
| BIS IS 14639 : 1998(R2016) | INFORMATION TECHNOLOGY - SOFTWARE PACKAGES - QUALITY REQUIREMENTS AND TESTING |
| ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) — Part 4: Global conformity assessment procedures (GCAP) — Certification and accreditation requirements |
| EN 15655:2009 | Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods |
| EN ISO/IEC 17000:2004 | Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004) |
| I.S. EN 61400-22:2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| IEC WT 01:2001 | IEC System for Conformity Testing and Certification of Wind Turbines - Rules and procedures |
| S.R. CEN ISO TS 15877-7:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN ISO/IEC 17030:2009 | Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2003) |
| BS EN 1916:2002 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
| BS EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation |
| 10/30216944 DC : 0 | BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| IEC 61400-22:2010 | Wind turbines - Part 22: Conformity testing and certification |
| BS EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
| BS EN ISO 21469:2006 | Safety of machinery. Lubricants with incidental product contact. Hygiene requirements |
| BS EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General |
| CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
| CR 14245:2001 | Guidelines for the application of EN 197-2 "Conformity Evaluation" |
| EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
| DIN EN 12094-3:2003-07 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR MANUAL TRIGGERING AND STOP DEVICES |
| DIN EN 12094-6:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
| EN 12094-16:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems |
| EN ISO/IEC 17065:2012 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
| DIN EN 14525:2005-02 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| EN 12094-1:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices |
| DIN EN 12094-4:2004-10 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004 |
| EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| EN 12839:2012 | Precast concrete products - Elements for fences |
| DIN EN 15038:2006-08 | TRANSLATION SERVICES - SERVICE REQUIREMENTS |
| EN 12094-4:2004 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators |
| DIN EN 450-2:2005-05 | Fly ash for concrete - Part 2: Conformity evaluation |
| DIN EN 12094-5:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
| CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| EN 12094-9:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors |
| EN 45010 : 1998 | GENERAL REQUIREMENTS FOR ASSESSMENT AND ACCREDITATION OF CERTIFICATION/REGISTRATION BODIES |
| DIN EN ISO 21469:2006-05 | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006) |
| DIN EN 545:2011-09 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity |
| ASTM E 2924 : 2014 : R2020 | Standard Practice for Intumescent Coatings |
| I.S. EN 1916:2002 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| I.S. EN 12094-13:2001 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 13: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES AND NON-RETURN VALVES |
| UNE-ISO/IEC 17007:2010 | Conformity assessment. Guidance for drafting normative documents suitable for use for conformity assessment |
| I.S. EN 12101-1:2005 | SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS |
| UNE-EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
| UNE-CEN/TS 1555-7:2015 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| UNE-EN ISO 17100:2015 | Translation Services - Requirements for translation services (ISO 17100:2015) |
| UNE-EN 12839:2012 | Precast concrete products - Elements for fences |
| UNE-EN 50518-3:2013 | Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation |
| UNE-EN 545:2011 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| UNE-EN 12842:2013 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| I.S. EN 15167-2:2007 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| ISO 10011-1:1990 | Guidelines for auditing quality systems — Part 1: Auditing |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ISO/IEC Guide 25:1990 | General requirements for the competence of calibration and testing laboratories |
| ISO/IEC Guide 23:1982 | Methods of indicating conformity with standards for third-party certification systems |
| EN 30011-1 : 1993 | GUIDELINES FOR AUDITING QUALITY SYSTEMS - AUDITING |
| EN 45020:2006 | Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004) |
| ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
| EN ISO 8402 : 1995 | QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY |
| ISO/IEC Guide 28:2004 | Conformity assessment — Guidance on a third-party certification system for products |
| EN 45020 : 2006 | STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| ISO/IEC Guide 39:1988 | General requirements for the acceptance of inspection bodies |
| ISO/IEC Guide 7:1994 | Guidelines for drafting of standards suitable for use for conformity assessment |
| EN 45004 : 1995 | GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
| ISO/IEC Guide 53:2005 | Conformity assessment — Guidance on the use of an organization's quality management system in product certification |
| EN 45001 : 1989 | GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.