ISO/TS 15869:2009
Withdrawn
Withdrawn
Gaseous hydrogen and hydrogen blends — Land vehicle fuel tanks
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
02-02-2009
Withdrawn date
03-13-2019
US$96.00
Excluding Tax where applicable
ISO 15869:2009 specifies the requirements for lightweight refillable fuel tanks intended for the on-board storage of high-pressure compressed gaseous hydrogen or hydrogen blends on land vehicles.
It is not intended as a specification for fuel tanks used for solid, liquid hydrogen or hybrid cryogenic high-pressure hydrogen storage applications.
ISO 15869:2009 is applicable for fuel tanks of steel, stainless steel, aluminium or non-metallic construction material, using any design or method of manufacture suitable for its specified service conditions.
ISO 15869:2009 applies to the following types of fuel tank designs:
- Type 1: metal fuel tanks;
- Type 2: hoop-wrapped composite fuel tanks with a metal liner;
- Type 3: fully wrapped composite fuel tanks with a metal liner;
- Type 4: fully wrapped composite fuel tanks with no metal liner.
| Committee |
ISO/TC 197
|
| DocumentType |
Technical Specification
|
| Pages |
41
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DD ISO/TS 15869:2009 | Identical |
| NEN NPR ISO/TS 15869 : 2009 | Identical |
| BS ISO 12619-14:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Flexible fuel line |
| 15/30315882 DC : 0 | BS ISO 12619-3:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 3: PRESSURE REGULATOR |
| 12/30197523 DC : 0 | BS ISO 12619-2 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| 16/30342629 DC : 0 | BS ISO 12619-9 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 9: PRESSURE RELIEF VALVE (PRV) |
| BS ISO 12619-12:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Gas-tight housing and ventilation hoses |
| 16/30321031 DC : 0 | BS ISO 12619-6 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 6: AUTOMATIC VALVE |
| BS ISO 12619-16:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Fittings |
| 15/30315879 DC : 0 | BS ISO 12619-2:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| ISO 12619-2:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods |
| ISO 12619-13:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 13: Rigid fuel line in stainless steel |
| ISO 12619-16:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 16: Fittings |
| ISO 12619-11:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 11: Excess flow valve |
| ISO 12619-14:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 14: Flexible fuel line |
| OVE/ONORM EN 62282-4-101 : 2015 | FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS (IEC 62282-4-101:2014) |
| BS ISO 12619-5:2016 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Manual cylinder valve |
| BS ISO 12619-1:2014 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components General requirements and definitions |
| 12/30197526 DC : 0 | BS ISO 12619-3 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 3: PRESSURE REGULATOR |
| 16/30342728 DC : 0 | BS ISO 12619-8 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 8: PRESSURE INDICATOR |
| 12/30197519 DC : 0 | BS ISO 12619-1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS |
| 16/30343646 DC : 0 | BS ISO 12619-16 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 16: FITTINGS |
| BS ISO 12619-8:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Pressure indicator |
| BS ISO 12619-6:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Automatic valve |
| BS ISO 12619-11:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Excess flow valve |
| ISO 12619-5:2016 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 5: Manual cylinder valve |
| BS ISO 12619-2 : 2014 | ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| ISO 12619-3:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 3: Pressure regulator |
| ISO/TR 13086-1:2011 | Gas cylinders - Guidance for design of composite cylinders — Part 1: Stress rupture of fibres and burst ratios related to test pressure |
| 16/30343643 DC : 0 | BS ISO 12619-15 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 15: FILTER |
| 16/30343631 DC : 0 | BS ISO 12619-11 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 11: EXCESS FLOW VALVE |
| 15/30321034 DC : DRAFT MAY 2015 | BS ISO 12619-4 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS - PART 4: CHECK VALVE |
| BS ISO 12619-9:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Pressure relief valve (PRV) |
| 16/30342632 DC : 0 | BS ISO 12619-10 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 10: PRESSURE RELIEF VALVE (PRD) |
| 16/30343634 DC : 0 | BS ISO 12619-12 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 12: GAS-TIGHT HOUSING AND VENTILATION HOSES |
| BS ISO 12619-7:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Gas injector |
| BS ISO 12619-3 : 2014 | ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 3: PRESSURE REGULATOR |
| ISO 12619-6:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 6: Automatic valve |
| BS ISO 12619-10:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Pressure relief device (PRD) |
| BS ISO 12619-4:2016 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Check valve |
| BS ISO 12619-15:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Filter |
| ISO 12619-8:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 8: Pressure indicator |
| BS ISO 12619-13:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Rigid fuel line in stainless steel |
| 16/30343637 DC : 0 | BS ISO 12619-13 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 13: RIGID FUEL LINE IN STAINLESS STEEL |
| ISO 12619-12:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 12: Gas-tight housing and ventilation hoses |
| ISO 12619-9:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 9: Pressure relief valve (PRV) |
| ISO 12619-10:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 10: Pressure relief device (PRD) |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| PD ISO/TR 13086-1:2011 | Gas cylinders. Guidance for design of composite cylinders Stress rupture of fibres and burst ratios related to test pressure |
| ISO 12619-7:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 7: Gas injector |
| 16/30343640 DC : 0 | BS ISO 12619-14 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 14: FLEXIBLE FUEL LINE |
| 17/30342725 DC : 0 | BS ISO 12619-7 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS - PART 7: GAS INJECTOR |
| 15/30321037 DC : DRAFT MAY 2015 | BS ISO 12619-5 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS - PART 5: MANUAL CYLINDER VALVE |
| ISO 12619-4:2016 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 4: Check valve |
| ISO 12619-15:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 15: Filter |
| ISO 12619-1:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 1: General requirements and definitions |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| I.S. EN 62282-4-101:2014 | FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS |
| ISO 7225:2005 | Gas cylinders — Precautionary labels |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| ASTM D 3418 : 2015 : REDLINE | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| ISO 6506-1:2014 | Metallic materials — Brinell hardness test — Part 1: Test method |
| ISO 11114-1:2012 | Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials |
| ISO 2808:2007 | Paints and varnishes — Determination of film thickness |
| EN 12862:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| EN 1964-3:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO/TS 14687-2:2008 | Hydrogen fuel — Product specification — Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| ISO 9809-2:2010 | Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| ISO 11114-4:2017 | Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ASTM D 2794 : 1993 | TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 9809-1:2010 | Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| AIAA G 095 : 2004 | GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.