• There are no items in your cart

MIL-DTL-5070 Revision F:2006

Current
Current

The latest, up-to-date edition.

ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR
Available format(s)

PDF

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A

Specifies general requirements for adapter, hose to tube, pipe, and flange, reusable - hydraulic, fuel, and oil lines.

Committee
FSC 4730
DevelopmentNote
Supersedes MIL A 5070 (D) (10/2000)
DocumentType
Standard
Pages
157
PublisherName
US Military Specs/Standards/Handbooks
Status
Current

MS24587 Revision E:2007 Adapter Assembly, Straight, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
MS27229 Revision C:2015 FLANGE NIPPLE ASSEMBLY 45 DEGREES, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES
MS27225 Revision C:2007 Nipple Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
MIL-DTL-8795-1 Base Document:2007 Hose Assembly, Reusable, Hydraulic, Fuel, and Oil Resistant, 3/16 Inch through 3 Inch Tube Sizes
MS27231 Revision B:2007 Straight Flange Nipple Assembly, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
MS27227 Revision C:2015 FLANGE NIPPLE ASSEMBLY 90 DEGREES, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES
MS27235 Revision D:2007 Elbow Tube, 45 Degrees
MS27224 Revision B:2007 Swivel Nut Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines 1/4 Inch Through 2 1/2 Inch Tube Sizes
MIL-DTL-8795 Revision G:2014 HOSE ASSEMBLIES, ELASTOMERIC, HYDRAULIC, FUEL, AND OIL RESISTANT, GENERAL SPECIFICATION FOR
MS24588 Revision C:2007 Nipple, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 3/16 through 3/4 Inch Tubing Sizes
MS27238 Revision B:2007 Wire, Nut Retaining, Designed for Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
MS27237 Revision F:2007 SHOULDER, SWIVEL FLANGE, ADAPTER, HOSE TO TUBE, HYDRAULIC FUEL AND OIL LINES, 1/2 THROUGH 3 INCHES TUBING SIZES
MIL-DTL-8794 Revision F:2007 HOSE, SYNTHETIC RUBBER - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT
MS27232 Revision B:2007 Straight Flange Assembly Adapter, Hose to Flange, Reusable, Hydraulic, Fuel and Oil Lines
MS27236 Revision B:2007 Shoulder - Designed for 45 Degrees and 90 Degrees Swivel Nut, Hose to Tube Adapters, Reusable, Hydraulic, Fuel and Oil Lines
MS27239 Revision E:2007 Nipple, Straight, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1/4 through 4 Inch Tube Sizes
MS27228 Revision B:2007 Flange Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
MS27234 Revision C:2007 Elbow Tube, 90 Degrees
MS28746 Revision E:2007 Fitting End - Hose, Swivel, Detachable, 45 Degrees Flange, 4 Bolt
MS24591 Revision D:2007 Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1 through 2 Inches Tubing Sizes
MS27230 Revision B:2007 Flange Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Fuel and Oil Lines
MIL-DTL-5070-2 Base Document:2007 Nipple Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Brazeless, One-Piece Design, Hydraulic, Fuel and Oil Lines, 1/4 through 2 Inch Tube Sizes
MS24590 Revision C:2007 Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 3/16 through 3/4 Inch Tubing Sizes
MS27223 Revision C:2007 Nipple Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines 1/4 Inch through 2 Inch Tube Sizes
MS24589 Revision C:2007 Nipple, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1 through 2 Inches Tubing Sizes
MIL-DTL-5070-1 Base Document:2007 Nipple Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Brazeless, One-Piece Design, Hydraulic, Fuel and Oil Lines, 1/4 through 2 Inch Tube Sizes
MS27226 Revision B:2007 Swivel Nut Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines

SAE AMS 5689 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
SAE AMS 2486 : 2010 CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE
MS27236 Revision B:2007 Shoulder - Designed for 45 Degrees and 90 Degrees Swivel Nut, Hose to Tube Adapters, Reusable, Hydraulic, Fuel and Oil Lines
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE AMS QQ A 225/9 : 2014 ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED
SAE AS 4841 : 2017 FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION
SAE AMS QQ P 416 : 2016 PLATING, CADMIUM (ELECTRODEPOSITED)
MIL-STD-130 Revision N:2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
MS27238 Revision B:2007 Wire, Nut Retaining, Designed for Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
MS24587 Revision E:2007 Adapter Assembly, Straight, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
SAE J 1966 : 2011 LUBRICATING OILS, AIRCRAFT PISTON ENGINE (NON-DISPERSANT MINERAL OIL)
SAE AS 603 : 2015 IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES
SAE AMS 2488 : 2000 ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
ANSI/NCSL Z540 3 : 2006(R2013) REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
MIL-PRF-5606 Revision H:2002 HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE
SAE AMS 6382 : 2014 STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED
SAE AMS 5643 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AMS 5743 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED
SAE AMS 5697 : 2012 STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED
SAE AMS QQ A 200/8 : 2015 ALUMINUM ALLOY 6061, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED A96061
SAE AMS WW T 700/4 : 2012 TUBE, ALUMINUM ALLOY, DRAWN, SEAMLESS, 5052
SAE AMS A 22771 : 2012 ALUMINUM ALLOY FORGINGS, HEAT TREATED
SAE AMS 4141 : 2014 ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 6381 : 2013 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140)
SAE AMS WW T 700/6C : 2001(S2015) TUBE, ALUMINUM ALLOY, DRAWN, SEAMLESS, 6061
SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
MIL-STD-889 Revision C:2016 DISSIMILAR METALS
SAE AMS 5566 : 2011 STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304) HIGH PRESSURE, COLD DRAWN
SAE ARP 908 : 2013 TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING
MS24591 Revision D:2007 Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1 through 2 Inches Tubing Sizes
SAE AMS QQ A 367 : 2012 ALUMINUM ALLOY FORGINGS
MIL-PRF-87257 Revision C:2017 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE
SAE AMS 5567 : 2015 STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED
ASTM B 567 : 1998 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
MS27235 Revision D:2007 Elbow Tube, 45 Degrees
MS27237 Revision F:2007 SHOULDER, SWIVEL FLANGE, ADAPTER, HOSE TO TUBE, HYDRAULIC FUEL AND OIL LINES, 1/2 THROUGH 3 INCHES TUBING SIZES
MS27234 Revision C:2007 Elbow Tube, 90 Degrees
MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 4127 : 2012 ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED
MS27224 Revision B:2007 Swivel Nut Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines 1/4 Inch Through 2 1/2 Inch Tube Sizes
SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
MS24590 Revision C:2007 Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 3/16 through 3/4 Inch Tubing Sizes
SAE AMS 6370 : 2016 STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
SAE AMS QQ A 225/8 : 1998 ALUMINUM ALLOY 6061, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED
SAE AMS 6360 : 2013 STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), NORMALIZED OR STRESS RELIEVED
MIL-DTL-8795 Revision G:2014 HOSE ASSEMBLIES, ELASTOMERIC, HYDRAULIC, FUEL, AND OIL RESISTANT, GENERAL SPECIFICATION FOR
MIL-DTL-8794 Revision F:2007 HOSE, SYNTHETIC RUBBER - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT
MS28741 Revision K:2010 HOSE ASSEMBLY, DETACHABLE END FITTING, MEDIUM PRESSURE
ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
SAE AMS S 6758 : 2013 STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY)
SAE AMS 4124 : 2012 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED
SAE AMS 4928 : 2016 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
SAE AMS 6362 : 2014 STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), 150 KSI (1034 MPA) TENSILE STRENGTH
SAE AMS 5557 : 2012 STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED
SAE AMS 6361 : 2014 STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) 125 KSI (862 MPA) TENSILE STRENGTH

View more information
US$20.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.