MIL-STD-464 Revision C:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electromagnetic Environmental Effects Requirements for Systems
Available format(s)
PDF
Language(s)
English
Published date
12-01-2010
Publisher
Superseded date
12-12-2022
Superseded by
US$20.00
Excluding Tax where applicable
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - APPLICATION GUIDE
Describes electromagnetic environmental effects (E3) interface requirements and verification criteria for airborne, sea, space, and ground systems, including associated ordnance.
| DocumentType |
Standard
|
| Pages |
165
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This standard establishes electromagnetic environmental effects (E3) interface requirements and verification criteria for airborne, sea, space, and ground systems, including associated ordnance.
| 16/30337938 DC : 0 | BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| SAE AS6129 | AS6129: Interface Standard, Airborne EO/IR Systems, Electrical |
| MIL-PRF-32316 Base Document:2008 | Rifle, 7.62MM: Semi-Automatic Sniper System (SASS) - M110 |
| MIL-PRF-71185 Revision A:2013 | Dynamic Reference Unit-Hybrid-Replacement (DRU-H-R) |
| MIL-STD-1901 Revision A:2002 | MUNITION ROCKET AND MISSILE MOTOR IGNITION SYSTEM DESIGN, SAFETY CRITERIA FOR |
| 13/30286075 DC : 0 | BS EN 61000-4-36 ED 1.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-36: TESTING AND MEASUREMENT TECHNIQUES - IEMI IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS |
| MIL-DTL-32151 Revision A:2006 | Impulse Cartridge, CCU-71/A |
| MIL-STD-1791 Revision C:2017 | Designing for Internal Aerial Delivery in Fixed Wing Aircraft |
| MIL-PRF-83419 Revision F:2016 | Altimeter, Servo Controlled, Automatic Pressure Standby |
| STANREC 4567 : 2014 | NATO IMPLEMENTATION OF UNIFIED PROTECTION AGAINST ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE3) |
| SAE ARP5120 | Aircraft Gas Turbine Engine Health Management System Development and Integration Guide |
| NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-STD-2088 Revision B:2007 | Bomb Rack Unit (BRU), Single Store, Aircraft |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| AIAA G-082:2022 | Guide: Space Systems — Composite Overwrapped Pressure Vessels with a Plastic Liner |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-PRF-32565 Revision A:2017 | Battery, Rechargeable, Sealed, 6T Lithium-Ion |
| MIL-DTL-32106 Base Document:2003 | Initiators, Electrical, for Rocket Motor Igniters |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-PRF-7115 Revision G:2012 | Converters, Aircraft, General Specification for |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-27723 Revision F:2013 | Probe, Total Temperature, Deiceable |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| ANEP-80 : 2009 | NATO SONOBUOY INTEROPERABILITY SPECIFICATION - COMMON SPECIFICATIONS |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-HDBK-240 Revision A:2011 | Hazards of Electromagnetic Radiation to Ordnance Test Guide (Replaced by MIL-HDBK-240-1, MIL-HDBK-240-2, MIL-HDBK-240-3, MIL-HDBK-240-4, MIL-HDBK-240-5, MIL-HDBK-240-6, and MIL-HDBK-240-7) |
| DI-MGMT-81826 Revision C:2014 | F/A-18 and EA-18 Aircraft / System Program Protection Implementation Plan |
| MIL-DTL-15370 Revision K:2015 | Couplers, Directional General Specification for |
| AFGS-87219 Revision B:2012 | Electrical Power Systems, Aircraft |
| MIL-PRF-53024 Revision C:2012 | Compactor, High Speed, Self-Propelled, Commercial Construction Equipment (CCE) |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| NASA MSFC STD 1800 : 2008 | ELECTROSTATIC DISCHARGE (ESD) CONTROL FOR PROPELLANT AND EXPLOSIVE DEVICES |
| A-A-52316 Revision C:2010 | Tester, Construction Materials, Moisture & Density (TCMMD) |
| NASA STD 7002 : 0 | PAYLOAD TEST REQUIREMENTS |
| MIL-DTL-32572 Base Document:2017 | Anchor Windlass, Electro-Mechanical, Vertical, Two-Speedand Variable-Speed |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| SAE ARP94910 | Aerospace - Vehicle Management Systems - Flight Control Design, Installation and Test of, Military Unmanned Aircraft, Specification Guide For |
| SAE ARP4945A | Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting |
| IEC 61000-4-36:2014 | Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems |
| MIL-DTL-32015 Base Document:1999 | Microphones, Linear, General Specification for |
| MIL-HDBK-516 Revision C:2014 | Airworthiness Certification Criteria |
| AEP-62 VOL 7 : 2013 | PROCEDURES FOR TESTING AND EVALUATION PERFORMANCE LEVELS OF DAS (DEFENSIVE AIDS SUITES) FOR ARMOURED VEHICLES - VOLUME 7: PROCEDURE FOR THE ASSESSMENT OF INTEGRATION |
| MIL-STD-1310 Revision H:2009 | Shipboard Bonding, Grounding, and other Techniques for Electromagnetic Compatibility, Electromagnetic Pulse (EMP) Mitigation, and Safety |
| MIL-HDBK-510-1 Revision A:2010 | Aerospace Fuels Certification (S/S by MIL-HDBK-510) |
| MIL-DTL-32188 Base Document:2005 | Initiator, Mechanical Actuated JAU-25/A |
| MIL-HDBK-1760 Revision A:2004 | Aircraft/Store Electrical Interconnection System |
| MIL-STD-331 Revision D:2017 | Fuzes, Ignition Safety Devices and Other Related Components, Environmental and Performance Tests for |
| MIL-PRF-32381 Revision B:2016 | Acoustic Hailing Device (Light) |
| MIL-STD-1605 Revision A:2009 | Procedures for Conducting a Shipboard Electromagnetic Interference (EMI) Survey (Surface Ship) |
| NASA KSC STD E 0022 : 2013 | BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS |
| MIL-HDBK-1763 Base Document:1998 | Aircraft/Stores Compatibility: Systems Engineering Data Requirements and Test Procedures |
| MIL-PRF-53051 Revision C:2017 | Pumping Assemblies, Wheel-Mounted, Diesel Engine Driven, Bulk Transfer, Fuel and Potable Water Pumping Service |
| JSSG-2001 Revision B:2004 | Air Vehicle |
| MIL-DTL-32193 Base Document:2005 | Initiator, Explosive Actuated, JAU-29/A |
| MIL-HDBK-274 Revision A:2011 | Electrical Grounding for Aircraft Safety |
| MIL-PRF-32516 Base Document:2015 | Electronic Test Equipment, Intermittent Fault Diagnostic (Electrical) |
| SAE AS19692B | Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
| MIL PRF 0032381 : A | ACOUSTIC HAILING DEVICE (LIGHT) |
| SAE ARP4404C | Aircraft Electrical Installations |
| SAE AS1650E | Coupling Assembly, Threadless, Flexible, Fixed Cavity, Self-Bonding, Procurement Specification |
| IEEE 1709-2010 | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
| MIL-DTL-53078 Revision A:2011 | Mounting Kit: M1 Tank, Cleared Lane Marking System (Clams) |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| NASA MSFC HDBK 3697 : 2014 | ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-DTL-83361 Revision B:2007 | Indicator, Pressure, Oil, Dual, 0-100 PSI, EGU-18/A |
| MIL-PRF-57267 Base Document:2017 | Coupling, Aerial Pressure Refueling Type MA-5 |
| IPC HDBK 630 : 0 | GUIDELINES FOR DESIGN, MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES ASSEMBLY |
| SAE ARP5770 | Mechanical Control Design Guide |
| BS ISO/IEC/IEEE 80005-1:2012 | Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements |
| MIL-DTL-9490 Revision E:2008 | Flight Control Systems - Design, Installation and Test of Piloted Aircraft, General Specification for |
| MIL-DTL-85097-13 Revision C:2000 | Aircrew Escape Propulsion Systems (AEPS) Rocket Motor, Canopy Jettison, Mark 109 Mods 0 and 1 (Loaded Assemblies) |
| NASA MSFC SPEC 521 : 2013 | ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS FOR EQUIPMENT AND SUBSYSTEMS |
| MIL-DTL-82960 Revision B:2010 | Initiator, Propellant Actuated, JAU-27/A (MF72) |
| NASA STD 4003 : 2013 | ELECTRICAL BONDING FOR NASA LAUNCH VEHICLES, SPACECRAFT, PAYLOADS, AND FLIGHT EQUIPMENT |
| JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| AEP-41 VOL 1 : 2004 | UNIFIED ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE[3]) PROTECTION, PHILOSOPHY AND METHODOLOGY |
| MIL-PRF-83323 Revision D:2016 | Tester, Universal Receptacle, Aerial Refueling |
| ADS-63-SP : 2001 | AERONAUTICAL DESIGN STANDARD - STANDARD PRACTICE - RADAR SYSTEM AIRWORTHINESS QUALIFICATION AND VERIFICATION REQUIREMENTS |
| MIL-PRF-52955 Revision D:2009 | Improved Position and Azimuth Determining System (IPADS) |
| MIL-STD-1316 Revision F:2017 | Fuze Design, Safety Criteria for |
| MIL-DTL-32194 Revision B:2009 | Impulse Cartridge, CCU-72/A |
| MIL-STD-1289 Revision D:2003 | AIRBORNE STORES, GROUND FIT AND COMPATIBILITY REQUIREMENTS |
| JSSG-2010-12 Base Document:1998 | Crew Systems Deployable Aerodynamic Decelerator (DAD) Systems Handbook |
| MIL-PRF-32293 Base Document:2008 | Cap, Blasting, Electric - M6 |
| AEP-24 : 2006 | AIRCRAFT ELECTRICAL HAZARDS ON THE FLIGHT LINE |
| SAE AS50881F | Wiring Aerospace Vehicle |
| SAE AS5652A | 10 Megabit/sec Network Configuration Digital Time Division Command/Response Multiplex Data Bus |
| AECTP-250 : 2014 | ELECTRICAL AND ELECTROMAGNETIC ENVIRONMENTAL CONDITIONS |
| SAE AS94900 | Aerospace - Flight Control Systems - Design, Installation and Test of Piloted Military Aircraft, General Specification For |
| BS IEC 61000-4-36:2014 | Electromagnetic compatibility (EMC) Testing and measurement techniques. IEMI immunity test methods for equipment and systems |
| MIL-HDBK-235-1 Revision C:2010 | Military Operational EME Profiles Part 1D General Guidance |
| AEP-41 VOL 6 : 2014 | NATO IMPLEMENTATION OF UNIFIED PROTECTION AGAINST ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE[3]) |
| MIL-PRF-32294 Base Document:2008 | Cap, Blasting, Non-Electric - M7 Cap, Blasting, Practice, Inert, Non-Electric - XM30 |
| ADS-65-HDBK : 2004 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIRWORTHINESS QUALIFICATION AND VERIFICATION GUIDANCE FOR ELECTRO-OPTICAL AND SENSOR SYSTEMS |
| AECTP-500 : 2016 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
| MIL-DTL-28875 Revision C:2012 | Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for |
| MIL-DTL-23659 Revision F:2010 | Initiators, Electric, General Design Specification for |
| IEEE C62.55-2017 | IEEE Guide for Surge Protection of DC Power Feeds to Remote Radio Heads |
| MIL-DTL-62421 Revision A:2009 | Control, Unit, Electronic, Digital |
| SAE ARP5794 | Centrifugal Aircraft Fuel Pump Requirements, Design and Testing, Aerospace Standard |
| MIL-HDBK-237 Revision D:2005 | Electromagnetic Environmental Effects and Spectrum Supportability Guidance for the Acquisition Process |
| AEP-41 VOL 7 : 2014 | NATO IMPLEMENTATION OF UNIFIED PROTECTION AGAINST ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE[3]) - VOLUME 7: SUSTAINMENT TEST AND EVALUATION |
| AEP-41 VOL 2 : 2004 | ELECTROMAGNETIC (EM), ENVIRONMENTS (EMES), EM ENVIRONMENTAL EFFECTS (E[3]) AND OPERATIONAL CATEGORIES (OCS) |
| SAE AS4941B | Aerospace - General Requirements for Commercial Aircraft Hydraulic Components |
| ANEP-45 : 0 | |
| SAE AS5356B | Coupling, Fuel Line, Flexible, 125 psi General Specification for |
| SAE ARP5415A | User\'s Manual for Certification of Aircraft Electrical/Electronic Systems for the Indirect Effects of Lightning |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| IEEE/ANSI C63.26-2015 | IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services |
| SAE AIR825/12A | Oxygen System Integration and Performance Precautions |
| AAS3P-10 : 2011 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS |
| IEC/ISO/IEEE 80005-1:2012 | Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements |
| MIL-STD-704 Revision F:2004 | Aircraft Electric Power Characteristics |
| ISO 46:1973 | Aircraft — Fuel nozzle grounding plugs and sockets |
| FAA AC 20-53 : 2006 | PROTECTION OF AIRCRAFT FUEL SYSTEMS AGAINST FUEL VAPOR IGNITION CAUSED BY LIGHTNING |
| MIL-STD-1541 Revision A:1987 | Electromagnetic Compatibility Requirements for Space Systems (Future Acquisitions may Refer to: SMC-S-008, AIAA-S-121, and MIL-STD-464) |
| FAA AC 20-136 : 2011 | AIRCRAFT ELECTRICAL AND ELECTRONIC SYSTEM LIGHTNING PROTECTION |
| NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
| MIL-STD-449 Revision D:1973 | Radio Frequency Spectrum Characteristics Measurement of |
| MIL-HDBK-83578 Base Document:1999 | Criteria for Explosive Systems and Devices used on Space Vehicles (No S/S Document) |
| MIL-STD-1542 Revision B:1991 | Electromagnetic Compatibility and Grounding Requirements for Space System Facilities |
| MIL-STD-188-125-2 Base Document:1999 | High-Altitude Electromagnetic Pulse (HEMP) Protection for Ground-Based Facilities Performing Critical, Time-Urgent Missions Part 2 - Transportable Systems |
| MIL-HDBK-235-10 Base Document:2010 | Military Operational EME Profiles Part 10DExternal Electromagnetic Environment Levels for Submarine Operations |
| MIL-HDBK-1568 Base Document:1996 | Material and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems (S/S by MIL-STD-1568) |
| AECTP-500 : 2016 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-STD-1605 Revision A:2009 | Procedures for Conducting a Shipboard Electromagnetic Interference (EMI) Survey (Surface Ship) |
| MIL-STD-188-124 Revision B:1992 | Grounding, Bonding and Shielding for Common Long Haul/TacticalCommunication Systems Including Ground Based Communications-Electronics Facilities and Equipments |
| MIL-DTL-23659 Revision F:2010 | Initiators, Electric, General Design Specification for |
| MIL-STD-1310 Revision H:2009 | Shipboard Bonding, Grounding, and other Techniques for Electromagnetic Compatibility, Electromagnetic Pulse (EMP) Mitigation, and Safety |
| SAE ARP1870A | Aerospace Systems Electrical Bonding and Grounding for Electromagnetic Compatibility and Safety |
| ANEP-45 : 0 | |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| MIL-HDBK-423 Base Document:1993 | High-Altitude Electromagnetic Pulse (HEMP) Protection for Fixed and Transportable Ground - Based C4 1 Facilities - Volume 1 - Fixed Facilities |
| SAE ARP4242A | Electromagnetic Compatibility Control Requirements Systems |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| MIL-HDBK-235-1 Revision C:2010 | Military Operational EME Profiles Part 1D General Guidance |
| MIL-STD-1399-300 Revision B:2008 | Department of Defense Interface Standard Section 300B Electric Power, Alternating Current (S/S By MIL-STD-1399-300-1) |
| MIL-STD-1576 Base Document:1984 | Electroexplosive Subsystem Safety Requirements and Test Methods for Space Systems (Future Acquisitions may refer to:AIAA-S-113) |
| DOD-STD-1399-70-1 Base Document:1979 | Interface Standard for Shipboard Systems Section 070 - Part 1 D.C. Magnetic Field Environment (S/S by MIL-STD-1399-407) |
| SAE ARP5416A | Aircraft Lightning Test Methods |
| IEC 61000-2-9:1996 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance. Basic EMC publication |
| SAE ARP5414A | Aircraft Lightning Zone |
| MIL-HDBK-237 Revision D:2005 | Electromagnetic Environmental Effects and Spectrum Supportability Guidance for the Acquisition Process |
| MIL-HDBK-240 Revision A:2011 | Hazards of Electromagnetic Radiation to Ordnance Test Guide (Replaced by MIL-HDBK-240-1, MIL-HDBK-240-2, MIL-HDBK-240-3, MIL-HDBK-240-4, MIL-HDBK-240-5, MIL-HDBK-240-6, and MIL-HDBK-240-7) |
| MIL-STD-188-125-1 Base Document:1998 | High-Altitude Electromagnetic Pulse (HEMP) Protection for Ground-Based Facilities Performing Critical, Time-Urgent Missions Part 1 Fixed Facilities |
| MIL-STD-331 Revision D:2017 | Fuzes, Ignition Safety Devices and Other Related Components, Environmental and Performance Tests for |
| SAE ARP5412B | Aircraft Lightning Environment and Related Test Waveforms |
| MIL-HDBK-274 Revision A:2011 | Electrical Grounding for Aircraft Safety |
| MIL-DTL-83413 Revision C:2012 | Connectors and Assemblies, Electrical, Aircraft Grounding, General Specification for |
| CFR 47(PTS80-END) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| MIL-HDBK-83575 Base Document:1998 | General Handbook for Space Vehicle Wiring Harness Design and Testing |
| MIL-HDBK-419 Revision A:1987 | Grounding, Bonding and Shielding for Electronic Equipments and Facilities, (Handbook Contains both Volume I Basic Theory, and Volume II Applications) |
| MIL-HDBK-235-7 Base Document:2010 | Military Operational EME Profiles Part 7E External Electromagnetic Environment Levelsfor Ordnance |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.