• There are no items in your cart

NF EN 10002-1 : 2001

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
Superseded date

10-01-2009

Published date

01-12-2013

Avant-propos
1 Domaine d'application
2 Références normatives
3 Principe
4 Termes et définitions
5 Symboles et désignations
6 Éprouvette
   6.1 Forme et dimensions
   6.2 Types
   6.3 Préparation des éprouvettes
7 Détermination de l'aire de la section initiale (So)
8 Marquage de la longueur initiale entre repères (Lo)
9 Exactitude de l'appareillage d'essai
10 Conditions d'exécution de l'essai
   10.1 Méthode d'amarrage
   10.2 Vitesse d'essai
11 Détermination de l'allongement pour cent après rupture (A)
12 Détermination de l'allongement total pour cent sous force
   maximale (Agt)
13 Détermination de la limite conventionnelle d'élasticité (Rp)
14 Détermination de la limite d'extension (Rt)
15 Méthode de vérification de la limite d'allongement
   rémanent (Rr)
16 Détermination du coefficient de striction (Z)
17 Rapport d'essai
Annexe A (informative) Recommandations relatives à
         l'utilisation des machines d'essai de traction
         assistées par ordinateur
Annexe B (normative) Types d'éprouvette à employer dans le
         cas de produits minces: toles, feuillards et plats
         d'épaisseur comprise entre 0,1 et 3 mm
Annexe C (normative) Types d'éprouvette à employer dans le
         cas des fils, barres et profilés de diamètre ou
         épaisseur inférieur à 4 mm
Annexe D (normative) Types d'éprouvette à employer dans le
         cas de toles et plats d'épaisseur supérieure ou égale
         à 3 mm, et des fils, barres et profilés de diamètre
         ou épaisseur égal ou supérieur à 4 mm
Annexe E (normative) Types d'éprouvette à employer dans le cas
         des tubes
Annexe F (informative) Mesurage de l'allongement pour cent
         après rupture lorsque la valeur spécifiée est
         inférieure à 5 %
Annexe G (informative) Mesurage de l'allongement pour cent
         après rupture basé sur la subdivision de la longueur
         initiale entre repères
Annexe H (informative) Méthode manuelle de détermination de
         l'allongement total pour cent sous force maximale des
Annexe J (informative) Exactitude de l'essai de traction et
         estimation de l'incertitude de mesure
Bibliographie

Describes the method for tensile testing of metallic materials and defines the mechanical properties which can be determined thereby at ambient temperature. Cover references, principle, definitions, symbols and designations, test pieces, determination of original cross sectional area, marking the original gauge length, accuracy of testing apparatus, conditions of testing, determination of percentage elongation after fracture, determination of proof strength, method of verification of permanent set strength, and test report.

DevelopmentNote
Indice de classement: A03-001. Supersedes NFA 03 001 (08/2003)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Superseded
Supersedes

Standards Relationship
I.S. EN 10002-1:2001 Identical
UNE-EN 10002-1:2002 Identical
DIN EN 10002-1:2001-12 Identical
UNI EN 10002-1 : 2004 Identical
BS EN 10002-1:2001 Identical

NFC 32 102-15 : 2007 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 15: MULTICORE CABLES INSULATED AND SHEATHED WITH HEAT RESISTANT SILICONE RUBBER
NFA 35 020-2 : 1999 STEEL PRODUCTS - END COUPLING AND ANCHORING STEEL DEVICES FOR HIGH ADHERENCE STEEL FOR CONCRETE REINFORCEMENT - PART 2: TEST METHODS
NFP 84 206 : 1995 BUILDING WORKS - GROOVED SHEET METAL ROOFING WITH WATERPROOF COATING - PART 1: TECHNICAL CLAUSES - PART 2: SPECIAL CLAUSES
NF EN 15512 : 2009 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
NF EN 10217-6 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
NF EN 10217-1 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
NF EN ISO 16047 : 2005 AMD 1 2013 FASTENERS - TORQUE/CLAMP FORCE TESTING
NF EN 50164-2 : 2008 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
NF ENV 1993-5 : 2002 FD EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING
NF EN 10248-1 : 1995 HOT ROLLED SHEET PILING OF NON-ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
NFL 06-351 : 1995 AEROSPACE INDUSTRY - COATINGS THROUGH THERMAL SPRAYING - QUALITY OF COATINGS
NF EN 1993 1-10 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES
NF EN 50306-4 : 2003 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 4: MULTICORE AND MULTIPAIR CABLES STANDARD WALL SHEATHED
NF EN 50264-3-1 : 2008 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - SINGLE CORE CABLES
NF EN ISO 15614-3 : 2008 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW ALLOYED CAST IRONS
FD A35 029 : 1999 FD STEEL FOR CONCRETE REINFORCEMENT - WELDED CONNECTIONS - APPROVAL OF A WELDING PROCEDURE - APPROVAL OF WELDERS
NF EN 14525 : 2005 DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT
NF EN 74-1 : 2006 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
NF EN 12020-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
NF EN 10250-1 : 1999 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS
NFP 93 523 : 2002 BUILDING SITE EQUIPMENT - TEMPORARY METALLIC STAIRWAYS INTENDED FOR PUBLIC USE
NFA 33 200 : 95 XP IRON AND STEEL - MARAGING STEEL FOR FORGING INTENDED FOR THE MANUFACTURE OF FENCING BLADES
NFS 94 080-1 : 2007 SURGICAL IMPLANTS - TITANIUM ALLOY TI 6 AI 4V - PART 1: BARS AND RODS
NFP 94 325-1 : 2004 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GABION STRUCTURES - PART 1: STRUCTURES ON LAND
NF EN 50306-2 : 2003 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 2: SINGLE CORE CABLES
XP M88 561 : 2005 XP SECONDARY CONTAINMENTS OF THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, LIQUID FUELS FOR MOVABLE HEATING APPLIANCE AND DIESEL FUELS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE (PE) OR METALLIC SECONDARY CONTAINMENTS - REQUIREMENTS AND TEST METHODS
NFS 94 081-1 : 2007 SURGICAL IMPLANTS - TITANIUM 6-ALUMINIUM AND 7-NIOBIUM ALLOY - PART 1: BARS AND RODS
NF EN 50382-2 : 2008 AMD 1 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2: SINGLE CORE SILICONE RUBBER INSULATED CABLES FOR 120 DEGREES C OR 150 DEGREES C
NF EN 10088-4 : 2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
NF EN 10343 : 2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
NFP 98 550 : 96 XP VERTICAL ROAD TRAFFIC SIGNS - GANTRIES, CANTILEVERS AND HIGH MASTS - CALCULATION SPECIFICATIONS, INSTALLATION AND CONTROL
NF EN 50264-2-2 : 2008 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - MULTICORE CABLES
NF EN 10217-4 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
NF EN 10164 : 2005 STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS
NF EN 12807 : 2009 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
NF EN 10202 : 2002 COLD REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE AND ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL
NFD 65 031 : 2009 SHOP/STORE PRODUCT DISPLAY EQUIPMENT - METHODOLOGY AND CALCULATION METHOD FOR DETERMINATION OF GONDOLA CHARACTERISTICS
NF EN 10217-2 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
NFS 94 051 : 2000 IMPLANTS FOR SURGERY - METALLIC MATERIALS - WROUGHT STAINLESS STEEL
NF EN 1999-1-4 : 2007 AMD 1 2011 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
NFS 94 090 : 2005 MEDICO-SURGICAL EQUIPMENT - MATERIALS FOR ANCILLARY POSITIONING INSTRUMENTS FOR BONE SURGERY - MARTENSITIC, PRECIPITATION HARDENING, AUSTENITIC AND AUSTENO-FERRITIC STAINLESS STEELS
NF EN 50382-1 : 2008 AMD 1 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
NF EN 50264-3-2 : 2008 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - MULTICORE CABLES
NFE 29 204 : 2008 INDUSTRIAL PIPEWORKS - FORGED STEEL FLANGES AND COLLARS - MATERIALS - MECHANICAL PROPERTIES - FABRICATION - TESTS
XP A49 342 : 97 XP STEEL TUBES - WELDED STEEL TUBES WITH IMPROVED MACHINABILITY FOR MECHANICAL MACHINED PARTS - DIMENSIONS - TECHNICAL DELIVERY REQUIREMENTS
NF EN 10217-3 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
NFA 35 555 : 95 FD IRON AND STEEL - STRUCTURAL STEEL BARS DELIVERED IN THE QUENCHED AND TEMPERED CONDITION
NF CEN/TS 1071-9 : 2004 XP ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 9: DETERMINATION OF FRACTURE STRAIN
NF EN 50264-2-1 : 2008 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - SINGLE CORE CABLES
NFA 35 035 : 2001 STEEL PRODUCTS - HOT-DIP ZINC OR ZINC-ALUMINIUM COATED PRESTRESSING SMOOTH WIRES AND 7-WIRE STRANDS
NF EN 10088-5 : 2009 STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
NF ENV 1993 1-3 : 99 XP STEEL CONSTRUCTION - EUROCODE 3: DESIGN OF STEEL STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING
NF EN 15381 : 2008 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.