NF EN 1010-2 : 2006 + A1 2010
Current
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
01-12-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
5.1 General
5.2 Pre-press machinery
5.3 Sheet-fed printing presses and varnishing machines
(except screen printing presses)
5.4 Web-fed rotary printing presses and varnishing machines
5.4.1 General
5.5 Screen printing presses
5.6 Auxiliary devices for printing and varnishing machines
5.6.1 General
5.6.2 Cylinder and roller washing devices
5.6.3 Continuous-flow drying devices
5.6.4 Powder spraying devices
5.6.5 Auxiliary devices on inking and damping units
5.6.6 Plate clamping devices
5.6.7 Washing equipment for printing forms, rollers and
doctor blades
5.6.8 Pile turners
5.6.9 Measuring and control devices
6 Verification of safety requirements and/or measures
7 Information for use
7.1 Instruction handbook
7.1.1 Pre-press machinery
7.1.2 Sheet-fed printing presses and varnishing machines
7.1.3 Web-fed rotary printing presses and varnishing machines
7.1.4 Screen printing presses
7.1.5 Automatic cylinder and roller washing device
7.1.6 Continuous-flow drying devices
7.1.7 Alcohol-dosing devices
7.1.8 Washing equipment for printing forms, rollers and
doctor blades
7.1.9 Pile turners
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 94/9/EC
Bibliography
Pertains to Pre-press machinery (machinery and devices for the production of master copies and printing forms), Printing and varnishing machines and Auxiliary devices.
| DevelopmentNote |
Indice de classement: Q79-003-2. PR NF EN 1010-2 October 2004. (10/2004) 2006 Edition Re-issued in October 2010 & incorporates AMD 1 2010. (10/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 1010-2 : 2006 | Identical |
| EN 1010-2:2006+A1:2010 | Identical |
| NEN EN 1010-2 : 2006 + A1 2010 | Identical |
| I.S. EN 1010-2:2006 | Identical |
| NS EN 1010-2 : 2006 + A1 2010 | Identical |
| DIN EN 1010-2:2011-05 | Identical |
| NBN EN 1010-2 : 2006 + A1 2010 | Identical |
| UNE-EN 1010-2:2006 | Identical |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 378-1:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN ISO 13855:2010 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |