NF EN 12581 : 2006 + A1 2010
Current
COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
01-12-2013
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Liste des phénomènes dangereux significatifs
4.1 Généralités
4.2 Phénomènes dangereux mécaniques
4.3 Phénomènes dangereux électriques
4.4 Phénomènes dangereux thermiques
4.5 Phénomènes dangereux engendrés par le bruit
4.6 Phénomènes dangereux engendrés par les substances
dangereuses
4.7 Phénomènes dangereux d'incendie et d'explosion
4.8 Phénomènes dangereux dus à la défaillance de
l'alimentation en énergie
4.9 Phénomènes dangereux relatifs à la défaillance des
systèmes de commande
5 Prescriptions et/ou mesures de sécurité
5.1 Généralités
5.2 Prescriptions de sécurité mécanique
5.3 Prescriptions de sécurité électrique
5.4 Prescriptions et mesures de sécurité contre les
phénomènes dangereux thermiques
5.5 Prescriptions et mesures de sécurité contre le bruit
5.6 Prescriptions de sécurité contre les substances
dangereuses
5.7 Prescriptions et mesures de sécurité contre
l'incendie et l'explosion
5.8 Prescriptions et mesures de sécurité contre la
défaillance de l'alimentation en énergie
5.9 Prescriptions et mesures de sécurité contre la
défaillance des systèmes de commande
6 Vérification des prescriptions et/ou mesures de sécurité
6.1 Généralités
6.2 Équipements mécaniques
6.3 Équipements électriques
6.4 Équipements thermiques
6.5 Bruit
6.6 Substances dangereuses
6.7 Vérification des prescriptions et mesures de sécurité
contre l'incendie et l'explosion
6.8 Défaillance de l'alimentation en énergie
6.9 Systèmes de commande
7 Informations pour l'utilisation
7.1 Généralités
7.2 Notice d'instructions
7.3 Marquage
Annexe A (normative) Schémas associés aux zones de danger
d'une atmosphère explosible
Figure A.1 - Installation d'application au trempé utilisant
une peinture à base de solvant - Avec enceinte
Figure A.2 - Installation d'application au trempé utilisant
une peinture à base de solvant avec ou sans
enceinte
Annexe B (normative) Détermination de la concentration en
solvants inflammables en termes de LIE
B.1 Installations d'application au trempé utilisant une
peinture à base de solvant
B.2 Installation d'application de peinture en phase aqueuse
au trempé et par électrophorèse
Annexe C (informative) Schémas relatifs à la classification
des installations d'application au
trempé et par électrophorèse
Figure C.1 - Installation d'application au trempé sans
enceinte spécifique - Avec ou sans opérateur
Figure C.2 - Installation d'application au trempé avec
enceinte spécifique - Avec ou sans opérateur
Figure C.3 - Installation d'application par électrophorèse
sans enceinte spécifique - Avec ou sans opérateur
Figure C.4 - Installation d'application par électrophorèse
placée dans un tunnel de traitement - Sans
opérateur
Annexe D (informative) Classification de la réaction au feu
des matériaux- Normes nationales
Annexe E (informative) Références nationales aux valeurs
limites d'exposition
Annexe ZA (informative) Relation entre la présente norme
européenne et les exigences
essentielles de la Directive UE
98/37/CE
Annexe ZB (informative) Relation entre la présente Norme
européenne et les exigences
essentielles de la Directive UE
94/9/CE
Bibliographie
Applies to the design and construction of machinery for dip coating and electrodeposition of organic liquid coating material to industrial items.
| DevelopmentNote |
Indice de classement: T35-015. 2006 Edition Re-Issued in July 2010 & incorporates AMD 1 2010. (07/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 12581:2006 | Identical |
| BS EN 12581 : 2005 | Identical |
| DIN EN 12581:2011-02 | Identical |
| EN 12581:2005+A1:2010 | Identical |
| NEN EN 12581 : 2005 + A1 2010 | Identical |
| NS EN 12581 : 2005 + A1 2010 | Identical |
| NBN EN 12581 : 2006 + A1 2010 | Identical |
| UNE-EN 12581:2006 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
| EN 971-1 : 1996 | PAINTS AND VARNISHES - TERMS AND DEFINITIONS FOR COATING MATERIALS - PART 1: GENERAL TERMS |
| EN 60079-29-1:2016 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| CR 954-100:1999 | Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996 |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 12978:2003+A1:2009 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN 12445:2000 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| EN 50073:1999 | Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen |
| EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| EN 14462:2015 | Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
| EN 1838:2013 | Lighting applications - Emergency lighting |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |