• There are no items in your cart

NF EN 1999-1-1 : 2007 AMD 2 2014

Current
Current

The latest, up-to-date edition.

EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
Published date

01-12-2013

Avant-propos
1 Généralités
  1.1 Domaine d'application
  1.2 Références normatives
  1.3 Hypothèses
  1.4 Distinction entre les principes et les règles
      d'application
  1.5 Termes
  1.6 Symboles
  1.7 Conventions pour les axes des barres
  1.8 Spécification pour l'exécution des travaux
2 Base de calcul
  2.1 Exigences
  2.2 Principes du calcul aux états limites
  2.3 Variables fondamentales
  2.4 Vérification par la méthode des coefficients partiels
  2.5 Calcul assisté par des essais
3 Matériaux
  3.1 Généralités
  3.2 Aluminium de construction
  3.3 Dispositifs d'assemblage
4 Durabilité
5 Analyse structurale
  5.1 Modélisation structurale en vue de l'analyse
  5.2 Analyse globale
  5.3 Imperfections
  5.4 Méthodes d'analyse
6 États limites ultimes des barres
  6.1 Principe
  6.2 Résistance des sections transversales
  6.3 Résistance au flambement des barres
  6.4 Barres composées uniformes
  6.5 Plaques non renforcées soumises à une charge
      dans le plan
  6.6 Plaques renforcées soumises à une charge dans le plan
  6.7 Poutres à âme pleine
  6.8 Barres à âmes nervurées
7 États limites de service
  7.1 Généralités
  7.2 États limites de service pour les bâtiments
8 Calcul des assemblages
  8.1 Base de calcul
  8.2 Intersections relatives aux assemblages boulonnés,
      rivetés et soudés
  8.3 Assemblages cisaillés soumis à des vibrations et/ou
      à des inversions de charge
  8.4 Classification des assemblages
  8.5 Liaisons effectuées avec des boulons, des rivets et
      des goupilles
  8.6 Liaisons soudées
  8.7 Liaisons hybrides
  8.8 Liaisons fixées par adhésif
  8.9 Autres méthodes de liaison
Annexe A (normative) Classes d'exécution
Annexe B (normative) Bout en T équivalent en traction
Annexe C (informative) Sélection des matériaux
Annexe D (informative) Corrosion et protection de surface
Annexe E (informative) Modèles analytiques relatifs à la
         relation contrainte-déformation
Annexe F (informative) Comportement des sections
         transversales au-delà de la limite d'élasticité
Annexe G (informative) Capacité de rotation
Annexe H (informative) Méthode d'analyse des rotules
         plastiques pour poutres continues
Annexe I (informative) Déversement des poutres et
         flambement par torsion ou par torsion-flexion
         des barres en compression
Annexe J (informative) Propriétés des sections transversales
Annexe K (informative) Effets du traînage de cisaillement
         dans le calcul des barres
Annexe L (informative) Classification des liaisons
Annexe M (informative) Liaisons assemblées par collage

Applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design.

DevelopmentNote
Indice de classement: P22-151. (08/2007) National Annex to NF EN 1999-1-1 is available separately, see NF EN 1999-1-1/NA. (07/2016) Supersedes DTU P 22-702. (08/2017)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current
Supersedes

NF EN 81-43 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
NFP 95 304 : 1992 PROTECTION EQUIPMENT AGAINST AVALANCHES - SNOW NET - DESIGN SPECIFICATIONS
NFE 85 015 : 2008 ELEMENTS OF INDUSTRIAL FACILITIES - PERMANENT MEANS OF ACCESS - STAIRWAYS, STEPLADDERS AND GUARDRAILS
NFP 93 551 : 2016 BUILDING SITE EQUIPMENT - LOAD BEARING TOWERS - TECHNICAL SPECIFICATIONS - DESIGN - TESTS
XP P98 550-1 : 2008 XP OVERHEAD ROAD TRAFFIC SIGNS - GANTRIES, CANTILEVERS AND HIGH MASTS - PART 1: CALCULATION, SPECIFICATIONS, IMPLEMENTATION, CONTROL, MAINTENANCE, SURVEILLANCE
NF EN 1999-1-4 : 2007 AMD 1 2011 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
NF EN 1999-1-5 : 2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES
NF EN 1090-3 : 2009 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES

NF EN 586-1 : 1997 ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
NF EN 1418 : 1998 WELDING PERSONNEL - APPROVAL TESTING OF WELDING OPERATORS FOR FUSION WELDING AND RESISTANCE WELD SETTERS FOR FULLY MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS
NF EN 755-5 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM
NF EN 1999-1-3 : 2007 AMD 1 2012 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE
NF EN 439 : 1994 WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING
NF EN 754-2 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 2: MECHANICAL PROPERTIES
NF EN 755-9 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 9: PROFILES, TOLERANCES ON DIMENSIONS AND FORM
NF EN 755-1 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
NF EN 12681 : 2003 FOUNDING - RADIOGRAPHIC EXAMINATION
NF EN 573-2 : 1994 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 2: CHEMICAL SYMBOL BASED DESIGNATION SYSTEM
NF EN 1371-1 : 2011 FOUNDING - LIQUID PENETRANT TESTING - PART 1: SAND, GRAVITY DIE AND LOW PRESSURE DIE CASTINGS
NF EN 754-7 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM
NF EN 12020-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
NF EN 13068-3 : 2002 NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 3: GENERAL PRINCIPLES OF RADIOSCOPIC TESTING OF METALLIC MATERIALS BY X- AND GAMMA RAYS
NF EN 28839 : 1992 MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS
NF EN 1999-1-2 : 2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
NF EN 754-1 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
NF EN 485-2 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
NF EN 1990 : 2003 AMD 1 2006 EUROCODE - BASIS FOR DESIGN
NF EN 1999-1-4 : 2007 AMD 1 2011 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
NF EN 586-2 : 1994 ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 2: MECHANICAL PROPERTIES AND ADDITIONAL PROPERTY REQUIREMENTS
NF EN 754-6 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM
NF EN ISO 10042 : 2006 WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS
NF EN 754-3 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM
NF EN 755-2 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES
NFX 02 006 : 1994 FUNDAMENTAL STANDARDS - THE INTERNATIONAL SYSTEMS OF UNITS - DESCRIPTION AND RULES FOR USE - CHOICE OF MULTIPLES AND SUB-MULTIPLES
NF EN 755-6 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM
NF EN 485-1 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
NF EN 1592-4 : 1997 ALUMINIUM AND ALUMINIUM ALLOYS - HF SEAM WELDED TUBES - PART 4: TOLERANCES ON DIMENSIONS AND FORM FOR SQUARE, RECTANGULAR AND SHAPED TUBES
NF EN ISO 1302 : 2002 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION
NFX 02 003 : 2012 FUNDAMENTAL STANDARDS - WRITING RULES FOR NUMBERS, QUANTITIES, UNITS AND SYMBOLS
NF EN ISO 18273 : 2016 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION
NF EN 1592-2 : 1997 ALUMINIUM AND ALUMINIUM ALLOYS - HF SEAM WELDED TUBES - PART 2: MECHANICAL PROPERTIES
NF EN 13068-1 : 2000 NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 1: QUANTITATIVE MEASUREMENT OF IMAGING PROPERTIES
NF EN ISO 4287 : 1998 AMD 1 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
NF EN 287-2 : 92 AMD 1 97 APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS
NF EN 1706 : 2010 ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
NF EN 13068-2 : 2000 NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 2: CHECK OF LONG TERM STABILITY OF IMAGING DEVICES
NF EN 515 : 2017 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS - TEMPER DESIGNATIONS
NF EN 754-4 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM
NF EN ISO 898-1 : 2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
NF EN 573-3 : 2013 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
NF EN 485-3 : 2003 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 3: TOLERANCES ON DIMENSIONS AND FORM FOR HOT-ROLLED PRODUCTS
NF EN 755-4 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM
NF EN 755-7 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM
NF EN 1999-1-5 : 2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES
NF EN 1559-4 : 2015 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS
NF EN 19970 : 1997 NON-DESTRUCTIVE EXAMINATION OF FUSION WELDS - VISUAL EXAMINATION
NF EN 755-3 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM
NF EN 485-4 : 1994 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 4: TOLERANCES ON SHAPE AND DIMENSIONS FOR COLD-ROLLED PRODUCTS
NF EN 1090-1 : 2009 + A1 2012 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
NF EN 755-8 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM
NFP 06 005 : 1988 BASES FOR DESIGN OF STRUCTURES - NOTATIONS - GENERAL SYMBOLS
NF EN 1011-4 : 2000 AMD 1 2004 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS
NF EN 754-5 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM
NF EN 12020-2 : 2017 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM
NF EN 754-8 : 2016 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM
NF EN 1592-3 : 1997 ALUMINIUM AND ALUMINIUM ALLOYS - HF SEAM WELDED TUBES - PART 3: TOLERANCES ON DIMENSIONS AND FORM FOR CIRCULAR TUBES
NFP 06 007 : 1988 FD GENERAL PRINCIPLES ON RELIABILITY OF STRUCTURES - LIST OF EQUIVALENT TERMS
NF EN 1011-1 : 2009 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
NF EN 288-4 : 93 AMD 1 97 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 4: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF ALUMINIUM AND ITS ALLOYS
NF EN 573-1 : 2005 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 1: NUMERICAL DESIGNATION SYSTEM
NF EN 1090-3 : 2009 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
NF EN 1559-1 : 2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
NF EN 1592-1 : 1997 ALUMINIUM AND ALUMINIUM ALLOYS - HF SEAM WELDED TUBES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
NF EN 444 : 1994 NON-DESTRUCTIVE TESTING - GENERAL PRINCIPLES FOR RADIOGRAPHIC EXAMINATION OF METALLIC MATERIALS BY X- AND GAMMA RAYS
NF EN 571-1 : 1997 NON DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES
NF EN 586-3 : 2002 ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 3: TOLERANCES ON DIMENSIONS AND FORM
NF EN 508-2 : 2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
NF EN ISO 4288 : 1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
NF EN 1993 1-1 : 2005 AMD 1 2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.