SAE AS45909A
Withdrawn
Stud, Locked In, Ring Locked, Serrated, General Specification For
Hardcopy , PDF
English
12-06-2015
12-06-2015
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES
Specifies the requirements for locked-in studs.
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
SAE International
|
| Status |
Withdrawn
|
| Supersedes |
The specification covers the requirements for locked-in studs. The method of locking in the stud is by means of a serratedcollar and an accessory lockring with matching serrations installed within the parent material to prevent rotation.
| SAE AMS5663N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| SAE AMS5662N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable |
| SAE AMS6322P | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) |
| MIL-STD-2073-1 Revision E:2008 | Standard Practice for Military Packaging |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AS51989B | STUD, LOCKED IN-RING LOCKED, SERRATED |
| SAE AMS4965L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged |
| FED-STD-H28-2 Revision B:1991 | Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AMS2401J | Plating, Cadmium Low Hydrogen Content Deposit |
| SAE AMSH81200D | Heat Treatment of Titanium and Titanium Alloys |
| MS51995 Revision D:2015 | Fasteners, Ring Locked Inserts and Studs, Installation and Replacement of |
| SAE AS51997B | RING, LOCKED, SERRATED-HIGH STRENGTH |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| MS51497 Base Document:1985 | STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER |
| SAE AS51990B | RING, LOCK, SERRATED |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MS51994 Revision A:1988 | Hole Preparation-Ring Locked Insets and Studs, Standard Dimensions for |
| SAE AMS6370P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| FED-STD-H28-20 Revision B:1994 | Screw-Thread Standards for Federal Services Section 20 Inspection Methods for Acceptability of UN, UNR, UNJ, M, AND MJ Screw Threads |
| SAE AMS4967L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable |
| SAE AS51992B | STUD, LOCKED IN-RING, SERRATED, HIGH STRENGTH |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.