ISO 9229:2007
|
Thermal insulation Vocabulary
|
EN 12667:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
|
EN 12085:2013
|
Thermal insulating products for building applications - Determination of linear dimensions of test specimens
|
EN ISO 10456:2007/AC:2009
|
BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
|
EN 1606:2013
|
Thermal insulating products for building applications - Determination of compressive creep
|
ISO 717-2:2013
|
Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation
|
EN 29052-1:1992
|
Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
|
EN 12939:2000
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
|
EN 12350-6:2009
|
Testing fresh concrete - Part 6: Density
|
EN ISO 9229:2007
|
Thermal insulation - Vocabulary (ISO 9229:2007)
|
EN 1605:2013
|
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
EN ISO 717-2:2013
|
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013)
|
EN 12431:2013
|
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
|
EN 1097-3:1998
|
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
|
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
|
EN 1602:2013
|
Thermal insulating products for building applications - Determination of the apparent density
|
EN 933-1:2012
|
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
|
EN 16025-2:2013
|
Thermal and/ or sound insulating products in building construction - Bound EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster
|
ISO 140-8:1997
|
Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
|
ISO 10456:2007
|
Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
|
EN ISO 140-8 : 1997
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR
|
ISO 12570:2000
|
Hygrothermal performance of building materials and products — Determination of moisture content by drying at elevated temperature
|
EN 1609:2013
|
Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
|
EN 826:2013
|
Thermal insulating products for building applications - Determination of compression behaviour
|
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
|
EN 12086:2013
|
Thermal insulating products for building applications - Determination of water vapour transmission properties
|
EN 13172:2012
|
Thermal insulation products - Evaluation of conformity
|