CEN/TS 15597-2:2012
|
Winter maintenance equipment - Spreading machines (gritting machines) - Part 2: Requirements for distribution and its test
|
ISO 11130:2010
|
Corrosion of metals and alloys Alternate immersion test in salt solution
|
ISO 9377-2:2000
|
Water quality Determination of hydrocarbon oil index Part 2: Method using solvent extraction and gas chromatography
|
EN ISO 11885:2009
|
Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007)
|
EN 573-5:2007
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
|
EN 27888 : 1993
|
WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY
|
EN 573-2:1994
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system
|
EN ISO 3104:1996
|
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
|
ISO 5815-1:2003
|
Water quality Determination of biochemical oxygen demand after n days (BODn) Part 1: Dilution and seeding method with allylthiourea addition
|
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
|
PREN 16811-1 : DRAFT 2014
|
WINTER SERVICE EQUIPMENT - DE-ICING AGENTS - PART 1: SODIUM CHLORIDE - REQUIREMENTS AND TEST METHODS
|
EN 13036-1:2010
|
Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
|
ISO 565:1990
|
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
|
EN 1484 : 1997
|
WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC)
|
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
|
ISO 2591-1:1988
|
Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
|
ISO 12846:2012
|
Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment
|
ISO 6060:1989
|
Water quality — Determination of the chemical oxygen demand
|
ISO 11885:2007
|
Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
|
ISO 8397:1988
|
Solid fertilizers and soil conditioners — Test sieving
|
PREN 16811-2 : DRAFT 2014
|
WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 2: CALCIUM CHLORIDE AND MAGNESIUM CHLORIDE - REQUIREMENTS AND TEST METHODS
|
ISO 1523:2002
|
Determination of flash point — Closed cup equilibrium method
|
ISO 758:1976
|
Liquid chemical products for industrial use — Determination of density at 20 degrees C
|
ISO 15705:2002
|
Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method
|
EN 14231:2003
|
Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
|
EN 10025-5:2004
|
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
|
ISO 7888:1985
|
Water quality — Determination of electrical conductivity
|
EN 15597-1:2009
|
Winter maintenance equipment — Spreading machines (gritting machines) — Part 1: General requirements and definitions for spreading machines
|
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
|
EN 15144:2007
|
Winter maintenance equipment - Terminology - Terms for winter maintenance
|
EN 1236 : 1995
|
FERTILIZERS - DETERMINATION OF BULK DENSITY (LOOSE)
|
EN 15749:2009
|
Fertilizers - Determination of sulfates content using three different methods
|
ISO 649-2:1981
|
Laboratory glassware — Density hydrometers for general purposes — Part 2: Test methods and use
|
EN 1235:1995/A1:2003
|
SOLID FERTILIZERS - TEST SIEVING
|
EN 573-3:2013
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
|
EN 573-1:2004
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
|
ISO 2479:1972
|
Sodium chloride for industrial use — Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
|
EN ISO 9377-2 : 2000
|
WATER QUALITY - DETERMINATION OF HYDROCARBON OIL INDEX - PART 2: METHOD USING SOLVENT EXTRACTION AND GAS CHROMATOGRAPHY (ISO 9377-2:2000)
|
EN 206:2013+A1:2016
|
Concrete - Specification, performance, production and conformity
|
ISO 2480:1972
|
Sodium chloride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method
|
ISO 3944:1992
|
Fertilizers — Determination of bulk density (loose)
|
EN ISO 1523:2002
|
Determination of flash point - Closed cup equilibrium method (ISO 1523:2002)
|
EN 932-1:1996
|
Tests for general properties of aggregates - Part 1: Methods for sampling
|