AEP-63 : 2009
Current
The latest, up-to-date edition.
PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS
Hardcopy , PDF
English
01-04-2009
CHAPTER 1 - INTRODUCTION
CHAPTER 2 - SCOPE
CHAPTER 3 - NORMATIVE REFERENCES
CHAPTER 4 - DEFINITIONS
CHAPTER 5 - FIELD OF APPLICATION
CHAPTER 6 - REQUIREMENTS FOR QUALIFICATION
CHAPTER 7 - QUALIFICATION TESTS
CHAPTER 8 - PAINT IDENTIFICATION
CHAPTER 9 - TEST REPORT
ANNEX A
ANNEX B - SPECIFIC TEST METHODS
Specifies the performance requirements for non-skid performance and corrosion resistance by non-skid coating systems of ships exterior and interior decks exposed to the marine atmosphere. Also describes high durability protective non-skid coating systems for ships exterior and interior decks.
DocumentType |
Standard
|
Pages |
50
|
PublisherName |
NATO
|
Status |
Current
|
STANAG 4698 : 2010 | PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS AND THEIR APPLICATION FOR NAVAL PLATFORMS |
BS 381C:1996 | Specification for colours for identification, coding and special purposes |
ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
STANAG 1162 : 0 | VERTICAL REPLENISHMENT VERTREP OPERATING AREA MARKING CLEARANCES AND LIGHTING |
ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
ISO 3233:1998 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
ISO 3549:1995 | Zinc dust pigments for paints — Specifications and test methods |
ISO 6745:1990 | Zinc phosphate pigments for paints — Specifications and methods of test |
ISO 3001:1999 | Plastics Epoxy compounds Determination of epoxy equivalent |
ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
ISO 2808:2007 | Paints and varnishes Determination of film thickness |
STANAG 1278 : 2017 | STANDARD FOR THE REQUIRED LEVEL AND MEASUREMENT OF COEFFICIENT OF FRICTION ON FLIGHT DECKS |
ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
ISO 11507:2007 | Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water |
ISO 8501-3:2006 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
ISO 6270:1980 | Paints and varnishes — Determination of resistance to humidity (continuous condensation) |
ISO 3678:1976 | Paints and varnishes — Print-free test |
ISO 9117:1990 | Paints and varnishes — Determination of through-dry state and through-dry time — Method of test |
ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
ISO 2811:1974 | Paints and varnishes — Determination of density |
ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
ISO 11909:2007 | Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
ISO 4628-3:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
STANAG 4602 : 2004 | FIRE ASSESSMENT OF MATERIALS |
ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
ISO 11908:1996 | Binders for paints and varnishes — Amino resins — General methods of test |
ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
MIL-STD-1623 Revision E:2006 | FIRE PERFORMANCE REQUIREMENTS AND APPROVED SPECIFICATIONS FOR INTERIOR FINISH MATERIALS AND FURNISHINGS (NAVAL SHIPBOARD USE) |
ISO 1248:2006 | Iron oxide pigments Specifications and methods of test |
MIL F 24385 : F | FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
ISO 3682:1996 | Binders for paints and varnishes — Determination of acid value — Titrimetric method |
ISO 4618:2014 | Paints and varnishes — Terms and definitions |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
ISO 4629:1996 | Binders for paints and varnishes Determination of hydroxyl value Titrimetric method |
ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method |
ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
ISO 14680-1:2000 | Paints and varnishes Determination of pigment content Part 1: Centrifuge method |
ISO 8502-9:1998 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts |
ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
STANAG 1135 : 2017 | INTERCHANGEABILITY OF FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS USED BY THE ARMED FORCES OF THE NORTH ATLANTIC TREATY NATIONS |
ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
ISO 8504-3:1993 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning |
ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
ISO 10601:2007 | Micaceous iron oxide pigments for paints Specifications and test methods |
ISO 14680-2:2000 | Paints and varnishes Determination of pigment content Part 2: Ashing method |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.