BS 427-1:1961
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Method for Vickers hardness test Testing of metals
Hardcopy , PDF
30-06-1990
English
01-10-1982
Tables of hardness values applicable to tests on flat surfaces with loads in the range of 1 to 100 kgf; tables giving correction factors for making tests on spherical or cylindrical surfaces; minimum thickness of test pieces.
Committee |
ISE/101/5
|
DocumentType |
Standard
|
Pages |
53
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
EN 5 : 1974 | Similar to |
BS 1212-3:1979 | Specification for float operated valves (excluding floats). Diaphragm type (plastics body) for cold water services |
BS 1486-4:1981 | Lubricating nipples. Specification for hydraulic grease nipples |
BS 4175:1989 | Methods for superficial hardness test (Rockwell method) and for verification of superficial hardness testing machines (Rockwell method) |
BS 3673-1:1968 | Specification for spring retaining rings Carbon steel circlips |
BS 6136:1981 | Specification for dental tweezers |
BS 5770-4:1981 | Steel strip intended for the manufacture of springs Specification for martensitic and austenitic stainless steel |
BS 4292:1968 | Specification for electroplated coatings of gold and gold alloy |
BS 3990:1980 | Specification for acrylic resin teeth |
BS 3606:1978 | Specification for steel tubes for heat exchangers |
BS 5341-3:1976 | Specification for piston rings up to 200 mm diameter for reciprocating internal combustion engines Quality requirements |
BS 3877:1979 | Specification for metal cutting bandsaw blades |
BS A 300:1989 | Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads |
BS 240:1986 | Method for Brinell hardness test and for verification of Brinell hardness testing machines |
BS 4190:1967 | Specification for ISO metric black hexagon bolts, screws and nuts |
BS 411:1969 | Specification for circular saws for woodworking and their attachment |
BS 4372:1968 | Specification for engineers\' steel measuring rules |
BS 5770-2:1981 | Steel strip intended for the manufacture of springs Specification for cold rolled carbon and low alloy steel |
BS 3777:1964 | Specification for screw thread measuring cylinders |
BS 2SP 96:1982 | Specification for internal retaining rings (imperial sizes) |
BS 1978:1965 | Specification for bit braces |
BS 5535:1978 | Specification for right angle and box angle plates |
NES 779 PT 1 : ISSUE 2 | REQUIREMENTS FOR 90/10 COPPER NICKEL ALLOY MATERIAL - SHEET, STRIP, PLATE |
BS 4844-3:1974 | Specification for abrasion resisting white cast irons High chromium grades |
DEFSTAN 95-5/2(1987) : 1987 | INSPECTION OF WROUGHT STEEL FOR STRESSED APPLICATIONS |
DEFSTAN 03-4/4(1998) : 1998 | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
BS 4395-1:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
BS 5310-2B:1981 | Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications Hand crimping tools (removable and interchangeable dies, sizes A to G and Q to S) for radio frequency connectors and concentric contacts |
BS 957-1:1941 | Specification for feeler gauges Inch units |
BS 5577:1984 | Specification for table cutlery |
BS 448-2:1981 | Dimensions of electronic tubes and valves Specification for dimensions of United Kingdom electronic tubes |
BS 3288-4:1989 | Insulator and conductor fittings for overhead power lines Locking devices for ball and socket couplings of string insulator units: dimensions and tests |
BS 5310-3A:1988 | Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications Specification for hand crimping tools for contacts of electrical connectors |
BS 4825-3:1976 | Specification. Stainless steel pipes and fittings for the food industry. Clamp type couplings |
BS 4825-4:1977 | Specification for stainless steel pipes and fittings for the food industry Screwed type couplings |
BS 4208:1967 | Specification for carbon and low alloy steel containment structures for stationary nuclear power reactors |
BS 3401:1961 | Specification for beryllium copper crinkle washers |
BS SP 166:1982 | Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series) |
BS 5041-1:1987 | Fire hydrant systems equipment Specification for landing valves for wet risers |
BS 6747:1987 | Specification for orthodontic resins |
BS 2451:1963 | Specification for chilled iron shot and grit |
BS 6042:1981 | Specification for dental semi-precious metal casting alloys |
BS 812-110:1990 | Testing aggregates Methods for determination of aggregate crushing value (ACV) |
DEFSTAN 13-95/1(1978) : 1978 | COPPER AND GILDING METAL RINGS FOR DRIVING BANDS |
DEFSTAN 02-310/1(2000) : 2000 | REQUIREMENTS FOR THE MANUFACTURE OF COMMERCIALLY PURE TITANIUM SEAMLESS TUBES TYPE A - HEAT EXCHANGER TYPE B - GENERAL PURPOSE |
BS 3159-2:1962 | Specification for woodworking saws for hand use Tenon and dovetail saws |
BS 2870:1980 | Specification for rolled copper and copper alloys: sheet, strip and foil |
BS 192:1982 | Specification for open-ended wrenches |
BS 4204:1989 | Specification for flash welding of steel tubes for pressure applications |
BS 1674:1976 | Specification for equipment and general procedure for mixing and vulcanizing rubber test mixes |
BS 3146-1:1974 | Specification for investment castings in metal Carbon and low alloy steels |
BS 4437:1987 | Method for determining hardenability of steel by end quenching (Jominy test) |
BS 1429:1980 | Specification for annealed round steel wire for general engineering springs |
BS 709:1983 | Methods of destructive testing fusion welded joints and weld metal in steel |
BS 3692:1967 | Specification for ISO metric precision hexagon bolts, screws and nuts. Metric units |
BS 3921:1985 | Specification for clay bricks |
BS 1449-2:1983 | Steel plate, sheet and strip Specification for stainless and heat-resisting steel plate, sheet and strip |
BS 6223:1990 | Specification for friction welding of joints in metals |
BS 3159-1:1990 | Woodworking saws for hand use Specification for hand saws |
BS 970-1:1983 | Specification for wrought steels for mechanical and allied engineering purposes General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
BS 6105:1981 | Specification for corrosion-resistant stainless steel fasteners |
BS 3111-1:1987 | Steel for cold forged fasteners and similar components Specification for carbon and low alloy steel wire |
BS 869:1978 | Specification for toolmakers\' flats and high precision surface plates |
BS 3594-1:1963 | Specification for pipe wrenches Stillson type wrenches |
BS 4276:1968 | Specification for hard metal for wire, bar and tube drawing dies |
BS 3594-2:1965 | Specification for pipe wrenches Footprint type wrenches |
BS 1016-111:1990 | Methods for analysis and testing of coal and coke Determination of abrasion index of coal |
BS 970-4:1970 | Specification for wrought steels for mechanical and allied engineering purposes Valve steels |
BS 4545:1970 | Methods for mechanical testing of steel wire |
BS 5708:1979 | Specification for pruner shears (secateurs) |
BS 1212-2:1970 | Specification for ballvalves (excluding floats) Diaphragm type (brass body) |
BS 4A 4:1966 | Test pieces and test methods for metallic materials for aircraft. Metric units |
BS 4175-2:1970 | Method for Rockwell superficial hardness test (N and T scales) Verification of the testing machine |
BS 3892-1:1982 | Pulverized-fuel ash Specification for pulverized-fuel ash for use as a cementitious component in structural concrete |
BS 4929-2:1973 | Specification for steel hexagon prevailing-torque type nuts Unified (inch) series |
BS 6516-2:1990 | Solderless connections Specification for solderless crimped connections (including test methods and practical guidance) |
BS 6333:1983 | Specification for adjustable wrenches |
BS 498:1990 | Specification for rasps and engineers\' files |
BS 5600-3.11.2:1984 | Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Determination of apparent hardness. Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen |
BS A 299:1989 | Specification for procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads |
BS A 298:1988 | Methods of test for self-locking nuts with maximum operating temperature greater than 425°C |
BS 6073-1:1981 | Precast concrete masonry units Specification for precast concrete masonry units |
BS 3537:1979 | Specification for gudgeon pins up to 200 mm diameter |
BS 3962-6:1980 | Methods of test for finishes for wooden furniture Assessment of resistance to mechanical damage |
BS 6404-2:1985 | Magnetic materials Methods of measurement of magnetic, electrical and physical properties of magnetic sheet and strip |
BS 3072:1983 | Specification for nickel and nickel alloys: sheet and plate |
BS 436-3:1986 | Spur and helical gears Method for calculation of contact and root bending stress limitations for metallic involute gears |
BS 3072:1989 | Specification for nickel and nickel alloys: sheet and plate |
BS 235:1987 | Specification for gears for electric traction |
BS 3073:1977 | Specification for nickel and nickel alloys: strip |
BS 957-2:1969 | Specification for feeler gauges Metric units |
BS SP139 & SP140(1969) : 1969 | AEROSPACE SERIES - SPECIFICATION FOR CORROSION-RESISTING STEEL CRINKLE WASHERS |
BS 6813:1987 | Specification for trade cutlery for use with food |
BS 4311-2:1977 | Specification for gauge blocks and accessories Accessories |
BS 5194-4:1985 | Surgical instruments Specification for scissors, shears and other jointed cutting instruments |
BS 3HR 100:1978 | Procedure for inspection and testing of wrought heat-resisting alloys |
BS 6104-2:1983 | Mechanical properties of fasteners Specification for nuts with specified proof load values |
BS 7079-A1:SUPP1(1989) : 1989 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS & RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - REPRESENTATIVE PHOTOGRAPHIC EXAMPLES OF THE CHANGE OF APPEARANCE IMPARTED TO STEEL WHEN BLAST CLEANED WITH DIFFERENT ABRASIVES |
BS HC 100:1972 | Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings |
BS 3388:1973 | Specification for forks, shovels and spades |
BS 1098-2:1977 | Specification for jig bushes Metric units |
BS 4395-3:1973 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts (waisted shank), nuts and general grade washers |
BS 2965:1970 | Specification for dental chisels, excavators, probes and scalers |
BS 1016-19:1980 | Methods for analysis and testing of coal and coke Determination of the index of abrasion of coal |
BS 601-5:1973 | Specification for steel sheet and strip for magnetic circuits of electrical apparatus Methods of test |
BS 1561:1966 | Specification for silver anodes and silver salts for electroplating |
BS 5590:1978 | Specification for screw thread metric series measuring cylinders |
BS 3828:1973 | Specification for crystal glass |
BS 5770-3:1981 | Steel strip intended for the manufacture of springs Specification for pre-hardened and tempered carbon steel |
BS 4844:1986 | Specification for abrasion resisting white cast iron |
BS 5194-3:1985 | Surgical instruments Specification for dissecting forceps |
BS 2816:1973 | Specification for electroplated coatings of silver for engineering purposes |
BS 6104-1:1981 | Mechanical properties of fasteners Specification for bolts, screws and studs |
BS 3322:1981 | Specification for carpenters\' squares and bevels |
BS 3064:1978 | Specification for metric sine bars and sine tables (excluding compound tables) |
BS 2982:1986 | Specification for scalpels with detachable blades |
BS 5194-2:1989 | Surgical instruments Specification for instruments with pivot joints (excluding cutting instruments) |
BS 6944:1988 | Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications) |
BS 6104-3:1981 | Mechanical properties of fasteners Specification for set screws and similar threaded fasteners not under tensile stresses |
BS 1804-1:1966 | Specification for parallel steel dowel pins Inch series |
BS 6271:1982 | Specification for miniature hacksaw blades |
BS 3673-3:1968 | Specification for spring retaining rings Carbon steel C clips |
BS 4933:1973 | Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts |
BS 5770-1:1981 | Steel strip intended for the manufacture of springs Specification for hot rolled carbon and low alloy steel |
BS 5194-2:1985 | Surgical instruments Specification for instruments with pivot joints (excluding cutting instruments) |
BS 3366-2:1976 | Dental base metal casting alloys Inlay, crown and bridge alloys |
BS 4411:1969 | Specification for woodcutting bandsaw blades |
BS 3066:1981 | Specification for engineers\' cold chisels and allied tools |
BS 1804-2:1968 | Specification for parallel steel dowel pins Metric series |
BS 4929-1:1973 | Specification for steel hexagon prevailing-torque type nuts Metric series |
BS 812-111:1990 | Testing aggregates Methods for determination of ten per cent fines value (TFV) |
BS 2782-7 Method 720A:1979 | Methods of testing plastics. Rheological properties Determination of melt flow rate of thermoplastics |
DEFSTAN 03-4/3(1991) : 1991 | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPa |
DEFSTAN 02-749(PT2)/1(2000) : 2000 | REQUIREMENTS FOR ALUMINIUM-NICKEL-SILICON-BRASS - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS 1449-1:1983 | Steel plate, sheet and strip. Specification for carbon and carbon-manganese plate, sheet and strip |
BS 891:1989 | Methods for hardness test (Rockwell method) and for verification of hardness testing machines (Rockwell method) |
BS 427-2:1962 | Method for Vickers hardness test Verification of the testing machine |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.