BS ISO 4046-5:2016
Current
The latest, up-to-date edition.
Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board
Hardcopy , PDF
English
31-03-2016
Foreword
Introduction
Scope
Terms and definitions
Bibliography
Specifies terms related to properties of pulp, paper and board, in both English and French.
Committee |
PAI/11
|
DevelopmentNote |
Supersedes 00/123974 DC (01/2003) Together with BS ISO 4046-1, BS ISO 4046-2, BS ISO 4046-3 and BS ISO 4046-4, supersedes BS 3203(1979). (01/2003)
|
DocumentType |
Standard
|
Pages |
40
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
ISO 4046-5:2002 | Identical |
ISO 4046-5:2016 | Identical |
ISO 5651:1989 | Paper, board and pulps Units for expressing properties |
ISO 13821:2002 | Corrugated fibreboard Determination of edgewise crush resistance Waxed edge method |
ISO 1974:2012 | Paper — Determination of tearing resistance — Elmendorf method |
ISO 10241:1992 | International terminology standards Preparation and layout |
ISO 4094:2005 | Paper, board and pulps International calibration of testing apparatus Nomination and acceptance of standardizing and authorized laboratories |
ISO 9932:1990 | Paper and board Determination of water vapour transmission rate of sheet materials Dynamic sweep and static gas methods |
ISO 8254-1:2009 | Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method |
ISO 5629:1983 | Paper and board Determination of bending stiffness Resonance method |
ISO 11108:1996 | Information and documentation — Archival paper — Requirements for permanence and durability |
ISO 8226-1:1994 | Paper and board Measurement of hygroexpansivity Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % |
ISO 7263:2011 | Corrugating medium Determination of the flat crush resistance after laboratory fluting |
ISO 11556:2005 | Paper and board — Determination of curl using a single vertically suspended test piece |
ISO 5351-1:1981 | Cellulose in dilute solutions Determination of limiting viscosity number Part 1: Method in cupri-ethylene-diamine (CED) solution |
ISO 1924-1:1992 | Paper and board Determination of tensile properties Part 1: Constant rate of loading method |
ISO 5626:1993 | Paper Determination of folding endurance |
ISO 699:2015 | Pulps Determination of alkali resistance |
ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
ISO 302:2015 | Pulps Determination of Kappa number |
ISO 638:2008 | Paper, board and pulps Determination of dry matter content Oven-drying method |
ISO 5637:1989 | Paper and board Determination of water absorption after immersion in water |
ISO 9706:1994 | Information and documentation — Paper for documents — Requirements for permanence |
ISO 1762:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 525 degrees C |
ISO 692:1982 | Pulps Determination of alkali solubility |
ISO 9895:2008 | Paper and board — Compressive strength — Short-span test |
ISO 15361:2000 | Pulps Determination of zero-span tensile strength, wet or dry |
ISO 3783:2006 | Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model) |
ISO 776:2011 | Pulps — Determination of acid-insoluble ash |
ISO 2758:2014 | Paper Determination of bursting strength |
ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
ISO 5636-1:1984 | Paper and board Determination of air permeance (medium range) Part 1: General method |
ISO 801-1:1994 | Pulps Determination of saleable mass in lots Part 1: Pulp baled in sheet form |
ISO 9197:2016 | Paper, board and pulps Determination of water-soluble chlorides |
ISO 217:2013 | Paper Untrimmed sizes Designation and tolerances for primary and supplementary ranges, and indication of machine direction |
ISO 9184-1:1990 | Paper, board and pulps — Fibre furnish analysis — Part 1: General method |
ISO 5628:2012 | Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods |
ISO 15359:1999 | Paper and board Determination of the static and kinetic coefficients of friction Horizontal plane method |
ISO 8787:1986 | Paper and board — Determination of capillary rise — Klemm method |
ISO 216:2007 | Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction |
ISO 10716:1994 | Paper and board Determination of alkali reserve |
ISO 2144:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 900 degrees C |
ISO 2528:2017 | Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method |
ISO 186:2002 | Paper and board — Sampling to determine average quality |
ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
ISO 5635:1978 | Paper Measurement of dimensional change after immersion in water |
ISO 8791-1:1986 | Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method |
ISO 3781:2011 | Paper and board — Determination of tensile strength after immersion in water |
ISO 536:2012 | Paper and board Determination of grammage |
ISO 2493:1992 | Paper and board Determination of resistance to bending |
ISO 287:2017 | Paper and board — Determination of moisture content of a lot — Oven-drying method |
ISO 14968:1999 | Paper and board Cut-size office paper Measurement of curl in a pack of sheets |
ISO 12192:2011 | Paper and board — Determination of compressive strength — Ring crush method |
ISO 2469:2014 | Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
ISO 3035:2011 | Corrugated fibreboard — Determination of flat crush resistance |
ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
ISO 3037:2013 | Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method) |
ISO 5267-2:2001 | Pulps — Determination of drainability — Part 2: "Canadian Standard" freeness method |
ISO 5633:1983 | Paper and board Determination of resistance to water penetration |
ISO 11480:2017 | Pulp, paper and board — Determination of total chlorine and organically bound chlorine |
ISO 535:2014 | Paper and board — Determination of water absorptiveness — Cobb method |
ISO 3260:2015 | Pulps Determination of chlorine consumption (Degree of delignification) |
ISO 2470:1999 | Paper, board and pulps Measurement of diffuse blue reflectance factor (ISO brightness) |
ISO 2759:2014 | Board — Determination of bursting strength |
ISO 7213:1981 | Pulps Sampling for testing |
ISO 9198:2001 | Paper, board and pulp Determination of water-soluble sulfates |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.