DEFSTAN 02-113/2(2010) : 2010
Current
The latest, up-to-date edition.
REQUIREMENTS FOR MECHANICAL HANDLING
Hardcopy , PDF
English
01-12-2010
Foreword
1 Scope
2 Warning
3 Normative References
4 Basic Principles of Design
5 Fixed Cranes, Gantries, Davits and Derricks
Design Parameters
6 Anchor Capstans, Capstans and Cable Holders
7 Lifts
8 Winches, Reels and Windlasses
9 Lever Hoists
10 Jacks
11 Non-Traversing Hand Operated Chain Blocks and
their Associated Non-Geared Overhead Trolleys
12 Pulley Blocks and Snatch Blocks (Non-Geared)
13 Lifting Beams, Spreaders and Frames
Annex A - Normative References
Annex B - Abbreviations and Definitions
Describes the minimum requirements to be applied to lifting equipment used on-board Royal Navy (RN) Vessels and the specific requirements to ensure that the equipment shall be considered 'Fit for Purpose'.
DevelopmentNote |
Supersedes DEFSTAN 02-113/1(2005). (01/2011) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (05/2016)
|
DocumentType |
Standard
|
Pages |
64
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Current
|
Supersedes |
BS 3643-1:2007 | ISO metric screw threads Principles and basic data |
ISO 2408:2017 | Steel wire ropes — Requirements |
DEFSTAN 00-35(PT4)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 4: NATURAL ENVIRONMENTS |
DEFSTAN 07-279/3(2006) : 2006 AMD 1 2007 | REQUIREMENTS FOR REPLENISHMENT AT SEA HM SURFACE SHIPS |
DEFSTAN 02-632/2(2004) : 2004 | REQUIREMENTS FOR AC AND DC MOTORS |
BS EN 12385-3 : 2004 | STEEL WIRE ROPES - SAFETY - PART 3: INFORMATION FOR USE AND MAINTENANCE |
DEFSTAN 02-324(PT1)/1(2000) : 2000 | REQUIREMENTS FOR HYDRAULIC SYSTEMS - PART 1: GENERAL |
DEFSTAN 08-144/2(2001) : 2001 AMD 1 2003 | MATERIAL REQUIREMENTS FOR THE NBC DEFENCE OF HM SURFACE SHIPS INCLUDING RFA - CATEGORY 1 |
BS EN ISO 9001:2015 | Quality management systems. Requirements |
DEFSTAN 02-177/2(2002) : 2002 AMD 1 2002 | REQUIREMENTS FOR THE MANUFACTURE, TEST AND IDENTIFICATION FOR ITEMS OF SMITHS WORK |
DEFSTAN 08-123/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2 |
DEFSTAN 00-35(PT5)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 5: INDUCED MECHANICAL ENVIRONMENTS |
BS EN 1677-5 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
BS 545:1982 | Specification for bevel gears (machine cut) |
BS 2452:1954 | Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes) |
IMO IE110 : 2009 | SOLAS (CONSOLIDATED EDITION) |
DEFSTAN 00-35(PT1)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 1: CONTROL AND MANAGEMENT |
DEFSTAN 02-723/1(2000) : 2000 | REQUIREMENTS FOR MARKER PLATES |
BS EN 81-2 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
DEFSTAN 08-118(PT1)/1(2000) : 2000 | DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 1: REDUCTION OF NOISE RADIATED UNDERWATER |
BS EN 12385-1 : 2002 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
DEFSTAN 91-99/2(2002) : 2002 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, PETROLEUM NATO CODE: O-135 JOINT SERVICE DESIGNATION: OM-11 |
BS EN 81-1 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
BS EN 12385-5:2002 | Steel wire ropes. Safety Stranded ropes for lifts |
BS MA 47:1977 | Code of practice for ships\' cargo blocks |
BS EN 13157 : 2004 | CRANES - SAFETY - HAND POWERED CRANES |
DEFSTAN 61-12(PT25)/5(2010) : 2010 | WIRES, CORDS AND CABLES ELECTRICAL - PART 25: WIRES AND CABLES ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10MM[2] CROSS SECTIONAL AREA |
BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
DEFSTAN 00-35(PT3)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS |
BS EN 12385-4 : 2002 | STEEL WIRE ROPES - SAFETY - PART 4: STRANDED ROPES FOR GENERAL LIFTING APPLICATIONS |
BS 7471:1991 | Specification for mooring winches |
BS 721-1:1963 | Specification for worm gearing Imperial units |
BS 721-2:1983 | Specification for worm gearing Metric units |
BS EN 1494 : 2001 | MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT |
DEFSTAN 02-626/1(2000) : 2000 | CONTROL AND SURVEILLANCE EQUIPMENT FOR PLANT AND SYSTEM INSTALLATIONS CATEGORY 2 |
BS 463-1:1958 | Specification for sockets for wire ropes Inch units |
BS 2573-2:1980 | Rules for the design of cranes Specification for classification, stress calculations and design of mechanisms |
DEFSTAN 02-314/3(2005) : 2005 | COMPRESSED AIR SYSTEMS |
BS EN ISO 7500-1:2015 | Metallic materials — Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system |
BS 463-2:1970 | Specification for sockets for wire ropes Metric units |
BS EN 60893-3-1:2012 | Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Specifications for individual materials. Types of industrial rigid laminated sheets |
DEFSTAN 02-587(PT1)/3(2008) : 2008 | REQUIREMENTS FOR LIGHTING SYSTEMS - PART 1: SURFACE SHIPS |
BS EN 81-3 : 2003 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
DEFSTAN 66-2/4(2003) : 2003 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) |
BS EN 60893-2:2004 | Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.