IEEE C57.19.100-2012 REDLINE
|
IEEE Guide for Application of Power Apparatus Bushings
|
ISO 3772:2000
|
Photography Rolls of sensitized material for the pre-press industry Dimensions and related requirements
|
IEEE 62-1995
|
IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors
|
ASTM D 1816 : 2012 : REDLINE
|
Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
|
NEMA 107:2016
|
Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus
|
ASTM D 924 : 2015 : REDLINE
|
Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
|
IEC 60599:2015
|
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
|
NETA ATS : 2017
|
ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
|
IEEE C57.93-2007
|
IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers
|
IEEE C57.149-2012
|
IEEE Guide for the Application and Interpretation of Frequency Response Analysis for Oil-Immersed Transformers
|
IEEE C57.19.00 : 2004
|
GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS
|
IEEE C57.91-2011 REDLINE
|
IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators
|
IEEE C57.12.80-2010
|
IEEE Standard Terminology for Power and Distribution Transformers
|
IEEE 510-1983
|
IEEE Recommended Practices for Safety in High-Voltage and High-Power Testing
|
IEEE C57.12.90-2010
|
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
|
ASTM D 1275 : 2015
|
Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
|
IEEE 4-2013
|
IEEE Standard for High-Voltage Testing Techniques
|
ASTM D 1533 : 2012 : REDLINE
|
Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
|
IEEE C57.139-2010
|
IEEE Guide for Dissolved Gas Analysis in Transformer Load Tap Changers
|
IEEE C57.140-2006
|
IEEE Guide for Evaluation and reconditioning of Liquid Immersed Power Transformers
|
IEEE C57.104-2008
|
IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
|
IEEE C57.143-2012
|
IEEE Guide for Application for Monitoring Equipment to Liquid-Immersed Transformers and Components
|
NFPA 70E : 2018
|
ELECTRICAL SAFETY IN THE WORKPLACE
|
IEEE C57.111 : 1989
|
GUIDE FOR ACCEPTANCE OF SILICONE INSULATING FLUID AND ITS MAINTENANCE IN TRANSFORMERS
|
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE
|
CFR 29(PT1910.1000 TO END) : 0
|
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
|
IEEE C57.150-2012
|
IEEE Guide for the Transportation of Transformers and Reactors Rated 10 000 kVA or Higher
|
ISO 11171:2016
|
Hydraulic fluid power Calibration of automatic particle counters for liquids
|
ASTM D 1524 : 2015 : REDLINE
|
Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field
|
ASTM D 5837 : 2015 : REDLINE
|
Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
|
ASTM D 923 : 2015 : REDLINE
|
Standard Practices for Sampling Electrical Insulating Liquids
|
ASTM D 6786 : 2015 : REDLINE
|
Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
|
IEEE C57.147-2008
|
IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers
|
ISO 4402:1991
|
Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant
|
IEEE C57.106-2006
|
IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
|