API SPEC 16C : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CHOKE AND KILL EQUIPMENT
Hardcopy , PDF
10-04-2021
01-03-2015
1 Scope
2 Normative References
3 Terms, Definitions, and Abbreviations
4 Design Requirements
5 Material Requirements
6 Welding
7 Quality Control
8 Marking
9 Storing and Shipping
10 Equipment-specific Requirements
Annex A (informative) - Use of the API Monogram by Licensees
Annex B (normative) - Design Validation Procedures
Annex C (informative) - Weld Preparation Designs
Annex D (informative) - Heat Treating Equipment Qualification
Annex E (informative) - Pipe Thermal Expansion Calculations
Annex F (informative) - Purchasing Guidelines
Annex G (normative) - Drilling Choke Control Console System
Annex H (informative) - Example Choke and Kill System
Configurations
Bibliography
Provides the minimum requirements for the design and manufacture of the following types of new equipment: a) articulated choke and kill lines; b) choke and kill manifold buffer chamber; c) choke and kill manifold assembly; d) drilling choke actuators; e) drilling choke controls; f) drilling chokes; g) flexible choke and kill lines; h) union connections used in choke and kill assemblies; i) rigid choke and kill lines; j) swivel unions used in choke and kill equipment.
DevelopmentNote |
Chinese, Russian & Kazakh versions of 1ED 1993 editions are still available, see API 16C CHINESE, API 16C RUSSIAN & API 16C KAZAKH records respectively. (03/2015) 'ERRATA 4 2016' incorporates 'ERRATA 3 2016', 'ERRATA 2 2015' & 'ERRATA 1 2015'. (07/2016)
|
DocumentType |
Standard
|
Pages |
165
|
ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria New child ADD 1 2016 is added NEW CHILD ERR 3 2016 IS NOW ADDED New child ERR 1 2015 is added New child ERR 2 2015 is added New child ERR 1 2016 is added NEW CHILD ERR 4 2016 IS NOW ADDED
|
PublisherName |
American Petroleum Institute
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
API 92U : 2008 : INC : ADD 1 : 2015 : R201300 | UNDERBALANCED DRILLING OPERATIONS |
03/312144 DC : DRAFT JULY 2003 | ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
API 53 RUSSIAN : 1997 : R2004 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
UNI EN ISO 13624-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: DESIGN AND OPERATION OF MARINE DRILLING RISER EQUIPMENT |
BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
API 92U : 2008 : R2013 | UNDERBALANCED DRILLING OPERATIONS |
API 49 RUSSIAN : 2001 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
I.S. EN ISO 13624-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: DESIGN AND OPERATION OF MARINE DRILLING RISER EQUIPMENT |
04/301931 DC : DRAFT JAN 2004 | ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
API RP 68 : 1998 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
API 5C7:1996 | RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
API 68 : 1998 : R2010 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
NORSOK D 001 : REV 3 COR 2013 | DRILLING FACILITIES |
I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
API RP 17W : 2014 | RECOMMENDED PRACTICE FOR SUBSEA CAPPING STACKS |
API 92U : 2008 | UNDERBALANCED DRILLING OPERATIONS |
BS EN ISO 13624-1:2009 | Petroleum and natural gas industries. Drilling and production equipment Design and operation of marine drilling riser equipment |
API RP 16Q : 2017 | DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
API 49 : 2001 : R2013 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
API 7K : 2015+ERR 2:2016 | DRILLING AND WELL SERVICING EQUIPMENT |
UNI EN ISO 13628-2 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
API RP 16Q RUSSIAN : 2017 | DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
API 92M : 2017 | MANAGED PRESSURE DRILLING OPERATIONS WITH SURFACE BACK-PRESSURE |
API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
API 49 RUSSIAN : 2001 : R2007 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
API 7K CHINESE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
ISO 13628-2:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
EN ISO 13624-1:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment (ISO 13624-1:2009) |
API 5C7 : 1996 : R2007 | RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
API 16ST : 2009 : R2014 | COILED TUBING WELL CONTROL EQUIPMENT SYSTEMS |
ABS 0063 : 2018 COR 2018 | RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS |
API Std 53 RUSSIAN:1997 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
API 6X : 2014 | DESIGN CALCULATIONS FOR PRESSURE-CONTAINING EQUIPMENT |
07/30167130 DC : 0 | BS ISO 13624-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: DESIGN AND OPERATION OF MARINE DRILLING RISER EQUIPMENT |
API 16ST:2009 | COILED TUBING WELL CONTROL EQUIPMENT SYSTEMS |
API 49 : 2001 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
API 7K : 2015 | DRILLING AND WELL SERVICING EQUIPMENT |
API 7K REDLINE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
EN ISO 13628-2:2006/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
ISO 13624-1:2009 | Petroleum and natural gas industries Drilling and production equipment Part 1: Design and operation of marine drilling riser equipment |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
SAE J 517 : 2016 | HYDRAULIC HOSE |
API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ASTM E 446 : 2015 : REDLINE | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
API 5CT : 2012 | CASING AND TUBING |
ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
ASME B31.3:2016 | PROCESS PIPING |
NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
API 5L : 2012 | LINE PIPE |
AWS B5.1 : 2013 | SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTORS |
AWS A5.1M/A5.1 : 2012 | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
API 6X : 2014 | DESIGN CALCULATIONS FOR PRESSURE-CONTAINING EQUIPMENT |
API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.