EN 14576:2005
|
Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking
|
EN 14575:2005
|
Geosynthetic barriers - Screening test method for determining the resistance to oxidation
|
EN 14150:2006
|
Geosynthetic barriers - Determination of permeability to liquids
|
ISO 13438:2004
|
Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation
|
EN ISO 10319:2015
|
Geosynthetics - Wide-width tensile test (ISO 10319:2015)
|
ISO 527-4:1997
|
Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
|
EN 806-1:2000/A1:2001
|
SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL
|
CEN/TS 14418:2014
|
Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
|
ISO 10320:1999
|
Geotextiles and geotextile-related products Identification on site
|
ISO 12236:2006
|
Geosynthetics — Static puncture test (CBR test)
|
EN 1849-2:2009
|
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
|
EN ISO 527-4:1997
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
|
EN 495-5:2013
|
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
|
EN 14151:2010
|
Geosynthetics - Determination of burst strength
|
ISO 10319:2015
|
Geosynthetics — Wide-width tensile test
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
EN 12224 : 2000
|
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
|
EN ISO 10773:2011
|
Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011)
|
EN ISO 10318 : 2005
|
GEOSYNTHETICS - TERMS AND DEFINITIONS
|
ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces
|
EN 12311-2:2013
|
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
|
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
|
ISO 9862:2005
|
Geosynthetics — Sampling and preparation of test specimens
|
EN ISO 10320:1999
|
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE
|
EN 12311-1:1999
|
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
|
ISO/TS 13434:2008
|
Geosynthetics Guidelines for the assessment of durability
|
EN 1844:2013
|
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
|
EN 12310-1:1999
|
Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank)
|
EN 14414 : 2004
|
GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS
|
ASTM D 1603 : 2014 : REDLINE
|
Standard Test Method for Carbon Black Content in Olefin Plastics
|
EN 16416:2013
|
Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
|
EN 1109:2013
|
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
|
CEN/TS 14417:2014
|
Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers
|
ASTM D 696 : 2016 : REDLINE
|
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
|
EN ISO 11358 : 1997
|
PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - GENERAL PRINCIPLES
|
EN 12225 : 2000
|
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST
|
EN 14196:2016
|
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
|
EN ISO 9864:2005
|
Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
|
ISO 11358:1997
|
Plastics Thermogravimetry (TG) of polymers General principles
|
ISO 11357-6:2008
|
Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
ISO 10773:2011
|
Clay geosynthetic barriers Determination of permeability to gases
|
EN 1849-1:1999
|
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
|
ISO 10318:2005
|
Geosynthetics Terms and definitions
|
EN ISO 12236:2006
|
Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
|
ISO 527-3:1995
|
Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
|
EN ISO 527-3:1995/AC:2002
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
|
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
|
ISO 9864:2005
|
Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products
|
EN ISO 9862:2005
|
Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
|
CEN/TS 14416:2014
|
Geosynthetic barriers - Test method for determining the resistance to roots
|
EN 14415:2004
|
Geosynthetic barriers - Test method for determining the resistance to leaching
|
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles
|