Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 2566.2:2002

Current

Current

The latest, up-to-date edition.

Buried flexible pipelines Installation (Reconfirmed 2016)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

12-08-2002

Preview

Specifies requirements for the installation of buried flexible pipelines with structural design in accordance with AS/NZS2566.1.

This Standard specifies requirements for the installation, field testing and commissioning of buried flexible pipelines with structural design in accordance with AS/NZS 2566.1. These pipelines rely primarily upon side support to resist vertical loads without excessive deformation by adopting an elliptical shape.NOTE: Australian and New Zealand Standards generally do not—(a) restate the duties of employers, employees, designers and installers; (b) determine the applicability of regulatory limitations; or(c) determine appropriate health and safety practices.

Committee
WS-028
DocumentType
Standard
ISBN
0 7337 4667 5
Pages
82
ProductNote
Reconfirmed 07/10/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 7/10/2016
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS/NZS 2566.2:2002.Reconfirmed 2016. First published as AS/NZS 2566.2:2002. Reissued incorporating Amendment No. 1 (June 2013). Reissued incorporating Amendment No. 2 (May 2018). Reissued incorporating Amendment No. 3 (November 2018).

AS/NZS 2566.1:1998 Buried flexible pipelines Structural design
AS 1289.5.4.1-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS 1289.5.2.1-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compactive effort
AS 3706.3-2000 Geotextiles - Methods of test Determination of tearing strength - Trapezoidal method
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
AS/NZS 2041:1998 Buried corrugated metal structures
AS 1141.51-1996 Methods for sampling and testing aggregates Unconfined compressive strength of compacted materials
AS 3571-1989 Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications
AS 1289.3.2.1-1995 Methods of testing soils for engineering purposes Soil classification tests - Determination of the plastic limit of a soil - Standard method
AS 3706.1-1990 Geotextiles - Methods of test - General requirements, sampling, conditioning, basic physical properties and statistical analysis
AS 1289.6.3.3-1997 Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test (Reconfirmed 2013)
AS 3972-1997 Portland and blended cements
AS 4087-1996 Metallic flanges for waterworks purposes
AS 1289.5.3.1-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus
AS/NZS 4130:2001 Polyethylene (PE) pipes for pressure applications
AS 1289.3.4.1-1995 Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil - Standard method
AS 4799-2000 Installation of underground utility services and pipelines within railway boundaries
AS 1289.5.5.1-1998 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016)
AS/NZS 4129:2000 Fittings for polyethylene (PE) pipes for pressure applications
AS 1289.4.1.1-1997 Methods of testing soils for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil - Normal method
AS 3703.2-1989 Long-span corrugated steel structures - Design and installation
AS 1726-1993 Geotechnical site investigations
AS 1289.5.3.5-1997 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013)
AS 2129-2000 Flanges for pipes, valves and fittings (Reconfirmed 2016)
AS 4041-1998 Pressure piping
AS/NZS 1462.1:2001 Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings
AS 3706.9-2001 Geotextiles Methods of test - Determination of permittivity, permeability and flow rate
AS 1289.3.6.1-1995 Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
AS 3690-1989 Installation of ABS pipe systems
AS 1289.6.3.2-1997 Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9 kg dynamic cone penetrometer test
AS 1289.5.8.1-1995 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode
AS 2033-1980 Installation of polyethylene pipe systems
AS/NZS 2280:1999 Ductile iron pressure pipes and fittings
AS/NZS 4331.2:1995 Metallic flanges Cast iron flanges (Reconfirmed 2020)
AS 3582.1-1998 Supplementary cementitious materials for use with portland and blended cement Fly ash
AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
AS 2001.2.3-1988 Methods of test for textiles Physical tests - Determination of breaking force and extension of textile fabrics
AS 1289.5.1.1-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort
AS 4321-2001 Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings (Reconfirmed 2019)
AS 1289.5.7.1-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method)
AS 1762-1984 Helical lock-seam corrugated steel pipes - Design and installation
AS/NZS 4331.3:1995 Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020)
AS 3706.4-2001 Geotextiles - Methods of test Determination of burst strength - California bearing ratio (CBR) - Plunger method
AS 3798-1996 Guidelines on earthworks for commercial and residential developments
AS 1289.6.9.1-2000 Methods of testing soils for engineering purposes Soil strength and consolidation test - Determination of stiffness of soil - Clegg impact value (CIV)
AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
AS 2032-1977 Code of practice for installation of UPVC pipe systems
AS 1289.5.3.2-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer
AS/NZS 4331.1:1995 Metallic flanges Steel flanges (Reconfirmed 2020)
AS 3706.7-1990 Geotextiles - Methods of test Determination of pore-size distribution - Dry-sieving method
AS/NZS 1554.1:2000 Structural steel welding Welding of steel structures
AS 1289.5.6.1-1998 Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material (Reconfirmed 2016)
AS 3706.5-2000 Geotextiles - Methods of test Determination of puncture resistance - Drop cone method

AS 3571.2-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD)
AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications (Reconfirmed 2024)
AS/NZS 3518:2013 Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications
AS/NZS 4645.3:2008 Gas distribution networks Plastics pipe systems
AS/NZS 3690:2009 Installation of ABS pipe systems (Reconfirmed 2024)
AS/NZS 2033:2008 Installation of polyethylene pipe systems
AS/NZS 4798(INT):2005 Polyethylene maintenance shafts
AS 2419.1:2017 Fire hydrant installations System design, installation and commissioning
AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 1260:2009 PVC-U pipes and fittings for drain, waste and vent application
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications
AS 5100.8:2017 Bridge design Rehabilitation and strengthening of existing bridges
AS/NZS 4645.3:2018 Gas distribution networks Plastics pipe systems
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
AS/NZS 3084:2017 Telecommunications installations - Telecommunications pathways and spaces for commercial buildings
AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
AS/NZS 4765:2017 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 2280:2014 Ductile iron pipes and fittings
AS/NZS 2280:2020 Ductile iron pipes and fittings
AS 3571.1-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD)
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
AS/NZS 2032:2006 Installation of PVC pipe systems (Reconfirmed 2024)

View more information
$249.99
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more