Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 6026 : 2013 : REDLINE

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Using Significant Digits in Geotechnical Data

Available format(s)

PDF

Superseded date

03-07-2021

Language(s)

English

Published date

01-11-2013

CONTAINED IN VOL. 04.09, 2015 Describes to promote uniformity in recording significant digits for measured and calculated values involving geotechnical data.

1.1This practice is intended to promote uniformity in recording significant digits for measured and calculated values involving geotechnical data. The guidelines presented are industry standard, and are representative of the significant digits that should generally be retained. The guidelines do not consider material variation, purpose for obtaining the data, special purpose studies, or any considerations for the user's objectives; and it is common practice to increase or reduce significant digits of reported data to be commensurate with these considerations. It is beyond the scope of this practice to consider significant digits used in analysis methods for engineering design.

1.1.1Using significant digits in geotechnical data involves the processes of collecting, calculating, and recording either measured values or calculated values (results), or both.

1.2This practice accepts a variation of the traditional rounding method that recognizes the algorithm common to most hand-held calculators, see 5.2.3. The traditional rounding method (see 5.2) is in accordance with Practice E29 or IEEE/ASTM SI 10.

1.3This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title means only that the document has been approved through the ASTM consensus process.

Committee
D 18
DocumentType
Redline
Pages
7
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM D 4016 : 2014 : REDLINE Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method)
ASTM D 6459 : 2015 : REDLINE Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
ASTM D 7276 : 2016 : REDLINE Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
ASTM D 8169/D8169M : 2018 Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
ASTM D 7928 : 2017 : REDLINE Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D 7759/D7759M : 2014 : REDLINE Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
ASTM D 1143/D1143M : 2007 : R2013 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D 6635 : 2015 : REDLINE Standard Test Method for Performing the Flat Plate Dilatometer
ASTM D 7181 : 2011 Method for Consolidated Drained Triaxial Compression Test for Soils
ASTM D 7743 : 2012 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
AASHTO TP 104:2013 Standard Method of Test for Rapid Axial Compressive Load Testing of Deep Foundation Units
ASTM D 4406 : 2004 Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression (Withdrawn 2005)
ASTM D 5080 : 2017 : REDLINE Standard Test Method for Rapid Determination of Percent Compaction
ASTM D 698 : 2013-05 TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3]))
ASTM D 4253 : 2016 : REDLINE Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D 6393 : 2014 : REDLINE Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D 3966/D3966M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Lateral Load
ASTM D 2435/D2435M : 2011 : REDLINE Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
ASTM D 854 : 2014 : REDLINE Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
ASTM D 8107 : 2018 : REDLINE Standard Practice for Determining Sediment Pond Skimmer Flow Rate
ASTM D 7263 : 2009 : R2018 : EDT 1 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D 6724/D6724M : 2016 : REDLINE Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
ASTM D 5731 : 2016 : REDLINE Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
ASTM D 2974 : 2014 : REDLINE Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 6527 : 2000 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
ASTM D 7891 : 2015 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
ASTM D 7664 : 2010 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
ASTM D 7698 : 2011 : REV A : REDLINE Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
ASTM D 2977 : 2014 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D 6771 : 2002 Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations (Withdrawn 2011)
ASTM D 4531 : 2015 : REDLINE Standard Test Methods for Bulk and Dry Density of Peat and Peat Products
ASTM D 4612 : 2016 : REDLINE Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
ASTM D 1140 : 2017 : REDLINE Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
ASTM D 4718/D4718M : 2015 : REDLINE Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM D 425 : 2017 : REDLINE Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D 6103 : 2004 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) (Withdrawn 2013)
ASTM D 7263 : 2009 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D 3550/D3550M : 2017 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
ASTM D 4914/D4914M : 2016 : REDLINE Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
ASTM D 1633 : 2017 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
ASTM D 5270 : 1996 : R2014 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
ASTM D 4945 : 2017 : REDLINE Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
ASTM D 4320 : 2004 Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
ASTM D 4254 : 2016 : REDLINE Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D 7277 : 2016 : REDLINE Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
ASTM D 6028 : 2017 : REDLINE Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
ASTM D 5269 : 2015 : REDLINE Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
ASTM D 4394 : 2017 : REDLINE Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
ASTM D 5850 : 2018 : REDLINE Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM D 4104 : 2017 : REDLINE Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
ASTM D 5270 : 1996 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
ASTM D 5782 : 2018 : REDLINE Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 6913 : 2004 : R2009 : EDT 1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 4644 : 2016 : REDLINE Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks
ASTM D 560/D560M : 2016 : REDLINE Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
ASTM D 1632 : 2017 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D 6913 : 2004 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 8037/D8037M : 2016 Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils
ASTM D 7401 : 2008 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests (Withdrawn 2017)
ASTM D 5783 : 2018 : REDLINE Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 3551 : 2017 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
ASTM D 5195 : 2014 : REDLINE Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
ASTM D 5334 : 2014 : REDLINE Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
ASTM D 4373 : 2014 : REDLINE Standard Test Method for Rapid Determination of Carbonate Content of Soils
ASTM D 4623 : 2016 : REDLINE Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
AASHTO TP 100 : 2012 : R2015 METHOD OF TEST FOR DEEP FOUNDATION ELEMENTS UNDER BIDIRECTIONAL STATIC AXIAL COMPRESSIVE LOAD
ASTM D 5313 : 2004 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
ASTM D 4971 : 2016 : REDLINE Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM D 4648/D4648M : 2016 : REDLINE Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated<brk/>Fine-Grained Clayey Soil
ASTM D 420 : 2018 Standard Guide for Site Characterization for Engineering Design and Construction Purposes
ASTM D 4944 : 2018 : REDLINE Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM D 2166/D2166M : 2016 : REDLINE Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D 5920 : 2014 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method
ASTM D 1557 : 2012 : EDT 1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>))
ASTM D 5126 : 2016 : EDT 1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
ASTM D 4404 : 2018 : REDLINE Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
ASTM D 1883 : 2016 : REDLINE Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D 5143 : 2006 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
ASTM D 5716/D5716M : 2015 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
ASTM D 6128 : 2016 : REDLINE Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
ASTM D 5472/D5472M : 2014 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM D 6034 : 2017 : REDLINE Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM D 6027/D6027M : 2015 Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes
ASTM D 6519 : 2015 : REDLINE Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D 427 : 2004 Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn 2008)
ASTM D 7481 : 2018 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM D 6938 : 2017-03 TEST METHOD FOR IN-PLACE DENSITY AND WATER CONTENT OF SOIL AND SOIL-AGGREGATE BY NUCLEAR METHODS (SHALLOW DEPTH)
ASTM D 6725/D6725M : 2016 : REDLINE Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
ASTM D 5855 : 1995 : R2006 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
ASTM D 7458 : 2014 : REDLINE Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
ASTM D 7503 : 2018 : REDLINE Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
ASTM D 5268 : 2013 : REDLINE Standard Specification for Topsoil Used for Landscaping Purposes
AASHTO TP 104 : 2013(R2015) METHOD OF TEST FOR RAPID AXIAL COMPRESSIVE LOAD TESTING OF DEEP FOUNDATION UNITS
ASTM D 4511 : 2011 : REDLINE Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
ASTM D 5312/D5312M : 2012 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
ASTM D 7760 : 2018 : REDLINE Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
ASTM D 1997 : 2013 : REDLINE Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM D 7625 : 2010 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method (Withdrawn 2019)
ASTM D 4428/D4428M : 2014 : REDLINE Standard Test Methods for Crosshole Seismic Testing
ASTM D 2973 : 2016 : REDLINE Standard Test Method for Total Nitrogen in Peat Materials
ASTM D 1143/D1143M : 2007 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D 6572 : 2014-02 TEST METHODS FOR DETERMINING DISPERSIVE CHARACTERISTICS OF CLAYEY SOILS BY THE CRUMB TEST
ASTM D 4341 : 2003 Standard Test Method for Creep of Cylindrical Hard Rock Core Specimens in Uniaxial Compression (Withdrawn 2005)
ASTM D 4611 : 2016 : REDLINE Standard Test Method for Specific Heat of Rock and Soil
ASTM D 5873 : 2014 : REDLINE Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D 5270 : 1996 : R2002 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
ASTM D 7626 : 2010 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
ASTM D 6913/D6913M : 2017 : REDLINE Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 2850 : 2015 : REDLINE Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM D 5855/D5855M : 2015 : REDLINE Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
ASTM D 7013 : 2004 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup
AASHTO T 216 : 2007 METHOD OF TEST FOR ONE-DIMENSIONAL CONSOLIDATION PROPERTIES OF SOILS
AASHTO TP 100 : 2012 METHOD OF TEST FOR DEEP FOUNDATION ELEMENTS UNDER BIDIRECTIONAL STATIC AXIAL COMPRESSIVE LOAD
ASTM D 558 : 2011 : REDLINE Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM D 4221 : 2018 : REDLINE Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
ASTM D 5855 : 1995 : R2000 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of a Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in a Flowing Well
ASTM D 6773 : 2016 : REDLINE Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
ASTM D 6230 : 2013 : REDLINE Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM D 4554 : 2012 : REDLINE Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
ASTM D 5785/D5785M : 2015 : REDLINE Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
ASTM D 6836 : 2016 : REDLINE Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
ASTM D 5876/D5876M : 2017 : REDLINE Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 5607 : 2016 : REDLINE Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM D 4633 : 2016 : REDLINE Standard Test Method for Energy Measurement for Dynamic Penetrometers
ASTM D 7100 : 2011 : REDLINE Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM D 5855 : 1995 : R2013 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
ASTM D 6913 : 2004 : R2009 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 7608 : 2010 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
ASTM D 6913 : 2004 : EDT 2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 7560 : 2016 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
ASTM D 5143 : 2006 : R2015 : EDT 1 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023)
ASTM D 6391 : 2011 : REDLINE Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
ASTM D 4405 : 2004 Standard Test Method for Creep of Cylindrical Soft Rock Core Specimens in Uniaxial Compressions (Withdrawn 2005)
ASTM D 7013 : 2004 : EDT 1 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup
ASTM D 7380 : 2015 : REDLINE Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
ASTM D 6473 : 2015 : REDLINE Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control
ASTM D 806 : 2011 : REDLINE Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
ASTM D 5121 : 2015 : REDLINE Standard Practice for Preparation of Rock Slabs for Durability Testing
ASTM D 6236 : 2011 : REDLINE Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil
ASTM D 2664 : 2004 Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements (Withdrawn 2005)
ASTM D 6032/D6032M : 2017 : REDLINE Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
ASTM D 7481 : 2009 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder (Withdrawn 2018)
ASTM D 1587/D1587M : 2015 : REDLINE Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes
ASTM D 4050 : 2014 : REDLINE Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems
ASTM D 4643 : 2017 : REDLINE Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
ASTM D 7830/D7830M : 2014 : REDLINE Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D 7262 : 2010 : R2016 : EDT 1 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
ASTM D 6539 : 2013 : REDLINE Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air
ASTM D 5240 : 2004 Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate
ASTM D 5240/D5240M : 2013-05 STANDARD TEST METHOD FOR EVALUATION OF DURABILITY OF ROCK FOR EROSION CONTROL USING SODIUM SULFATE OR MAGNESIUM SULFATE
ASTM D 5143 : 2006 : R2010 : EDT 1 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
ASTM D 7263 : 2009 : R2018 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D 5092/D5092M : 2016 : REDLINE Standard Practice for Design and Installation of Groundwater Monitoring Wells
ASTM D 4395 : 2017 : REDLINE Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
ASTM D 3080/D3080M : 2011 : REDLINE Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020)
ASTM D 5311/D5311M : 2013 : REDLINE Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM D 6030 : 2015 : REDLINE Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
ASTM D 6475 : 2017 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
ASTM D 7300 : 2012-01 TEST METHOD FOR LABORATORY DETERMINATION OF STRENGTH PROPERTIES OF FROZEN SOIL AT A CONSTANT RATE OF STRAIN
ASTM D 4223 : 1999 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
ASTM D 5220 : 2014 : REDLINE Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM D 5335 : 2014 : REDLINE Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
ASTM D 6527 : 2000 : R2008 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation (Withdrawn 2017)
ASTM D 6780/D6780M : 2012 : REDLINE Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
ASTM D 4106 : 2015 : REDLINE Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
ASTM D 4542 : 2015 : REDLINE Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
ASTM D 4223/D4223M : 2012 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
ASTM D 3441 : 2016 Standard Test Method for Mechanical Cone Penetration Testing of Soils
ASTM D 1143/D1143M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D 5299/D5299M : 2018 : REDLINE Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM D 1557 : 2012 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>))
ASTM D 4943 : 2008-07 TEST METHOD FOR SHRINKAGE FACTORS OF SOILS BY THE WAX METHOD
ASTM D 6760 : 2016 : REDLINE Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
ASTM D 5874 : 2016 : REDLINE Standard Test Methods for Determination of the Impact Value (IV) of a Soil
ASTM D 2167 : 2015 : REDLINE Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM D 5202/D5202M : 2016 : REDLINE Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
ASTM D 2435 : 2004 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
ASTM D 4223 : 1999 : R2006 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
ASTM D 4648 : 2005 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
ASTM D 6035/D6035M : 2013 : REDLINE Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
ASTM D 5779/D5779M : 2014 : REDLINE Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control (Withdrawn 2023)
ASTM D 1143/D1143M : 2007 : EDT 1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D 6914/D6914M : 2016 : REDLINE Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
ASTM D 5882 : 2016 : REDLINE Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
ASTM D 5473/D5473M : 2015 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
ASTM D 5982 : 2015 : REDLINE Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
ASTM D 4767 : 2011 : REDLINE Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D 6067/D6067M : 2017 : REDLINE Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity
ASTM D 8106 : 2017 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
ASTM D 4829 : 2011 : REDLINE Standard Test Method for Expansion Index of Soils
ASTM D 6024/D6024M : 2016 : REDLINE Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
ASTM D 7949 : 2014 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations (Withdrawn 2023)
ASTM D 3689/D3689M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
ASTM D 8030/D8030M : 2016 Standard Practice for Sample Preparation for GCCM
ASTM D 653 : 2014 : REDLINE Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D 4452 : 2014 : REDLINE Standard Practice for X-Ray Radiography of Soil Samples
ASTM D 7013/D7013M : 2015 : REDLINE Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
ASTM D 3967 : 2016 : REDLINE Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D 1452/D1452M : 2016 : REDLINE Standard Practice for Soil Exploration and Sampling by Auger Borings
ASTM D 6151/D6151M : 2015 : REDLINE Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
ASTM D 5270 : 1996 : R2008 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
ASTM D 559/D559M : 2015 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
ASTM D 7262 : 2010 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
ASTM D 5550 : 2014 : REDLINE Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D 559 : 2003 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures (Withdrawn 2012)
ASTM D 5333 : 2003 Standard Test Method for Measurement of Collapse Potential of Soils (Withdrawn 2012)
ASTM D 6780 : 2005 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
ASTM D 6029 : 2017 : REDLINE Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
ASTM D 6913 : 2004 : EDT 1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 5519 : 2015 : REDLINE Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D 4959 : 2016 : REDLINE Standard Test Method for Determination of Water Content of Soil By Direct Heating
ASTM D 3080 : 2004 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
ASTM D 7070 : 2016 : REDLINE Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
ASTM D 1635/D1635M : 2012 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D 1634 : 2017 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D 6528 : 2017 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils
ASTM D 4044/D4044M : 2015 : REDLINE Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
ASTM D 2976 : 2015 Standard Test Method for pH of Peat Materials
ASTM D 4647/D4647M : 2013 : REDLINE Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test

ASTM E 833 : 2014 : REDLINE Standard Terminology of Building Economics
IEEE/ASTM SI_10-2010 American National Standard for Metric Practice
ASTM E 344 : 2016-12 TERMINOLOGY RELATING TO THERMOMETRY AND HYDROMETRY
ASTM D 653 : 2014 : REDLINE Standard Terminology Relating to Soil, Rock, and Contained Fluids

View more information
$125.58
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more