Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PD 6686:2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries
Available format(s)

Hardcopy , PDF

Superseded date

31-12-2012

Language(s)

English

Published date

20-03-2006

Foreword
1 Scope
2 Terms and definitions
3 Fire and explosion safety
4 General risk assessment
Annexes
Annex A European directives and United Kingdom
        regulations
Annex B Identification of dangerous substances
Annex C Hazardous areas: Zoning procedures
Annex D Preventing, detecting and minimizing potentially
        explosive atmospheres in the workplace
Annex E Avoidance and prevention of explosive
        atmospheres inside process plant
Annex F Ignition sources
Annex G Selection of equipment for use in hazardous areas
Annex H Explosion protection
Annex I Standards for the avoidance of fires and explosion
        hazards for machinery and equipment
Annex J Fire effluents
Annex K Emergency lighting and luminaires
Annex L Standards for safety signing
Annex M Standards for personal protective equipment
Annex N Reaction to fire and resistance to fire
        tests of building materials and structures
Annex O Standards for fire resistance of construction
        materials and building elements
Annex P Standards on fire safety design
Annex Q Standards on fire safety engineering
Annex R Standards on fire detection and warning
Annex S Standards for doors and barriers
Annex T Standards for smoke and heat exhaust ventilators
Annex U Fire extinguishing installations and equipment on
        premises
Bibliography
Figures
Tables

Gives a comprehensive guide to the standards, draft standards and other documents that contain the technical, practical and organizational information to ensure compliance with EU Directives and UK regulations.

Committee
EXL/23
DocumentType
Standard
Pages
196
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

BS 5925:1991 Code of practice for ventilation principles and designing for natural ventilation
BS 476-23:1987 Fire tests on building materials and structures Methods for determination of the contribution of components to the fire resistance of a structure
BS 476-4:1970 Fire tests on building materials and structures Non-combustibility test for materials
BS 7899-1:1997 Code of practice for assessment of hazard to life and health from fire General guidance
BS EN 60519-6:2011 Safety in electroheat installations Specifications for safety in industrial microwave heating equipment
BS 8202-2:1992 Coatings for fire protection of building elements Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
BS EN 1158:1997 Building hardware. Door coordinator devices. Requirements and test methods
BS EN 61508-7:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures
BS EN 61508-5:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Examples of methods for the determination of safety integrity levels
BS EN 13468:2001 Thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH
BS ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results Alternative methods for the determination of the precision of a standard measurement method
BS 2782-1:Method 140E:1982 Methods of testing plastics. Thermal properties Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method)
DIN 51794:2003-05 TESTING OF MINERAL OIL HYDROCARBONS - DETERMINATION OF IGNITION TEMPERATURE
BS 6742-3:1990 Electrostatic painting and finishing equipment using flammable materials Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held powder spray guns (energy limit of 5 mJ) and their associated apparatus
BS 4841-2:1975 Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Laminated board for use as a wall and ceiling insulation
BS EN 60695-2-12 : 2010 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
BS 6327:1982 Specification for fire protection of reciprocating internal combustion engines
BS EN 13274-1:2001 Respiratory protective devices. Methods of test Determination of inward leakage and total inward leakage
PD CLC/TR 50404:2003 Electrostatics. Code of practice for the avoidance of hazards due to static electricity
BS 8414-1:2002 Fire performance of external cladding systems Test methods for non-loadbearing external cladding systems applied to the face of a building
BS 5378-2:1980 Safety signs and colours Specification for colorimetric and photometric properties of materials
BS EN ISO 3680:2004 Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method
BS 7629-1:1997 Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire Multicore cables
BS 3958-3:1985 Thermal insulating materials Metal mesh faced man-made mineral fibre mattresses
BS 7346-2:1990 Components for smoke and heat control systems Specification for powered smoke and heat exhaust ventilators
BS EN 60893-3-4 : 2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-4: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON PHENOLIC RESINS
BS EN 13171 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION
BS EN ISO 5659-1:1999 Plastics. Smoke generation Guidance on optical-density testing
ISO 1516:2002 Determination of flash/no flash — Closed cup equilibrium method
BS ISO/TR 13387-3:1999 Fire safety engineering Assessment and verification of mathematical fire models
BS 7346-3:1990 Components for smoke and heat control systems Specification for smoke curtains
BS 2782-1:Method 140D:1997 Methods of testing plastics. Thermal properties Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)
BS 7346-4:2003 Components for smoke and heat control systems Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires. Code of practice
BS 5906:1980 Code of practice for storage and on-site treatment of solid waste from buildings
BS 6262-4:1994 Glazing for buildings Safety related to human impact
PREN 15233 : DRAFT 2005 METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
BS 6664-1(1986) : 1986 FLASHPOINT OF PETROLEUM AND RELATED PRODUCTS - METHOD OF TEST FOR FLASH - NO FLASH (CLOSED CUP EQUILIBRIUM METHOD)
BS EN 50050:2006 Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
BS ISO/TR 11696-1:1999 Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products
BS EN ISO 20823:2003 Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test
ISO 28:1976 Cinematography — Camera usage of 8 mm Type R motion-picture film — Specifications
BS EN ISO 9239-1:2010 Reaction to fire tests for floorings Determination of the burning behaviour using a radiant heat source
BS EN 50268-1:2000 Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions Apparatus
BS 6742-2:1987 Electrostatic painting and finishing equipment using flammable materials Specification for selection, installation and use of hand-held paint spray guns (energy limit of 0,24 mJ) and associated apparatus
BS EN 54-7:2001 Fire detection and fire alarm systems Smoke detectors. Point detectors using scattered light, transmitted light or ionization
BS EN 3-1:1996 Portable fire extinguishers Description, duration of operation, class A and B fire test
BS EN 54-1:2011 Fire detection and fire alarm systems Introduction
BS EN 403:2004 Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking
BS EN 3-5:1996 Portable fire extinguishers Specification and supplementary tests
BS 5839-5:1988 Fire detection and alarm systems for buildings Specification for optical beam smoke detectors
BS 3958-2:1982 Thermal insulating materials Calcium silicate preformed insulation
BS IEC 61831:1999 On-line analyser systems. Guide to design and installation
BS EN 12882:2015 Conveyor belts for general purpose use. Electrical and flammability safety requirements
BS EN 50014:1998 Electrical apparatus for potentially explosive atmospheres. General requirements
BS EN 3-4:1996 Portable fire extinguishers Charges, minimum required fire
BS EN ISO 14122-1:2016 Safety of machinery. Permanent means of access to machinery Choice of fixed means and general requirements of access
BS EN 13471:2001 Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion
BS EN 1953:2013 Atomising and spraying equipment for coating materials. Safety requirements
BS 8290-1:1991 Suspended ceilings Code of practice for design
BS 7036-3:1996 Code of practice for safety at powered doors for pedestrian use Swing doors and balanced doors
BS 6458-2.3:1985 Fire hazard testing for electrotechnical products. Test methods Bad-connection test with heaters
BS 5309-3:1976 Methods for sampling chemical products Sampling of liquids
BS EN 50016:2002 Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus \'p\'
BS KIT 140 : 2004 PD 7974 SERIES - FIRE SAFETY ENGINEERING PRINCIPLES FOR THE DESIGN OF BUILDINGS
BS EN 1486:2007 Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting
BS 5234-1:1992 Partitions (including matching linings) Code of practice for design and installation
BS ISO 10294-4 : 2001 FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 4: TEST OF THERMAL RELEASE MECHANISM
BS 5225-3:1982 Photometric data for luminaires Method of photometric measurement of battery-operated emergency lighting luminaires
BS 8214:1990 Code of practice for fire door assemblies with non-metallic leaves
BS 6391:1983 Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes
BS EN 954-1:1997 Safety of machinery. Safety related parts of control systems General principles for design
BS EN ISO 14557 : 2002 FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES
BS EN 50265-1:1999 Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable Apparatus
PREN 1839 : DRAFT 2014 DETERMINATION OF EXPLOSION LIMITS OF GASES AND VAPOURS AND DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION (LOC) FOR FLAMMABLE GASES AND VAPOURS
BS IEC 62086-2 : 2001 AMD 16068 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
BS 6896:1991 Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 3958-1:1982 Thermal insulating materials Magnesia preformed insulation
BS EN 1364-2:1999 Fire resistance tests for non-loadbearing elements Ceilings
BS EN 1846-3:2013 Firefighting and rescue service vehicles Permanently installed equipment. Safety and performance
BS 6643-2:1985 Recharging fire extinguishers (manufactured to BS 5423 \'Specification for portable fire extinguishers\') Specification for powder refill charges
BS 7655-8.2:1997 Specification for insulating and sheathing materials for cables. Cross-linked sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire Ordinary duty oil-resisting types
BS EN ISO 340:2013 Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method
BS EN 1365-1:2012 Fire resistance tests for loadbearing elements Walls
BS 7273-1:2000 Code of practice for the operation of fire protection measures Electrical actuation of gaseous total flooding extinguishing systems
BS EN 12259-1:1999 Fixed firefighting systems. Components for sprinkler and water spray systems Sprinklers
BS ISO 5658-2 : 2006 REACTION TO FIRE TESTS - SPREAD OF FLAME - PART 2: LATERAL SPREAD ON BUILDING AND TRANSPORT PRODUCTS IN VERTICAL CONFIGURATION
BS EN 13124-2:2004 Windows, doors and shutters. Explosion resistance. Test method Range test
BS EN 60519-2:2006 Safety in electroheat installations Particular requirements for resistance heating equipment
BS 5516-2:2004 Patent glazing and sloping glazing for buildings Code of practice for sloping glazing
BS EN 1834-1:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres
BS 5499-6:2002 Graphical symbols and signs. Safety signs, including fire safety signs Creation and design of graphical symbols for use in safety signs. Requirements
BS EN 13274-6:2002 Respiratory protective devices. Methods of test Determination of carbon dioxide content of the inhalation air
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
ISO 5660-2:2002 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
BS 5306-5.2:1984 Code of practice for fire extinguishing installations and equipment on premises. Halon systems Halon 1211 total flooding systems
BS EN 27201-1:1994 Fire protection. Fire extinguishing media. Halogenated hydrocarbons Specifications for halon 1211 and halon 1301
BS 5598-1:1978 Methods of sampling and test for halogenated hydrocarbons Sampling of liquid products
BS EN 61241-14:2004 Electrical apparatus for use in the presence of combustible dust Selection and installation
BS OHSAS 18001(1999) : 1999 AMD 14223 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - SPECIFICATION
BS EN 746-2:2010 Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
PREN 13501-4 : DRAFT 2015 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
PREN 1364-6 : DRAFT 2016 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 6: CAVITY BARRIERS
BS 2972:1989 Methods of test for inorganic thermal insulating materials
BS EN 50194:2000 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
BS EN 620 : 2002
BS 5588-12:2004 Fire precautions in the design, construction and use of buildings Managing fire safety
BS 7287:1990 Guide for the use of fire-resistant hydraulic fluids
BS EN 533:1997 Protective clothing. Protection against heat and flame. Limited flame spread materials and material assemblies
BS EN 1637:1999 Light conveyor belts. Test methods for the measurement of the electrical resistances
BS IEC 60079-19:1993 Electrical apparatus for explosive gas atmospheres Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives)
BS EN 60695-11-2:2017 Fire hazard testing Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance
BS 6464:1984 Specification for reinforced plastics pipes, fittings and joints for process plants
BS 6913-8:1992 Operation and maintenance of earth-moving machinery Specification for common symbols for operator controls and other displays
BS EN 983 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
BS 5266-4:1999 Emergency lighting Code of practice for design, installation, maintenance and use of optical fibre systems
BS 5958-2:1991 Code of practice for control of undesirable static electricity Recommendations for particular industrial situations
BS 5268-4.1:1978 STRUCTURAL USE OF TIMBER - PART 4: FIRE RESISTANCE OF TIMBER STRUCTURES - SECTION 4.1: RECOMMENDATIONS FOR CALCULATING FIRE RESISTANCE OF TIMBER MEMBERS
BS EN 13165 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION
BS OHSAS 18002(2000) : 2000 AMD 14224 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001
BS ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method
BS 5306-6.1:1988 Fire extinguishing installations and equipment on premises. Foam systems Specification for low expansion foam systems
BS EN 60079-15:2010 Explosive atmospheres Equipment protection by type of protection \'n\'
PREN 1364-5 : DRAFT 2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES
BS 8217:2005 Reinforced bitumen membranes for roofing. Code of practice
BS 5306-7:1988 Fire extinguishing installations and equipment on premises Specification for powder systems
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS EN 60893-3-2 : 2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-2: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON EPOXY RESINS
BS ISO TR 5658-1:1997 Reaction to fire tests. Spread of flame Guidance on flame spread
BS EN 13702-2:2003 Methods of test for petroleum and its products. BS 2000-514. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen Coaxial cylinders method
BS 3837-1:2004 Expanded polystyrene boards Boards and blocks manufactured from expandable beads. Requirements and test methods
BS EN 50136-2-3:1998 Alarm systems. Alarm transmission systems and equipment Requirements for equipment used in systems with digital communicators using the public switched telephone network
BS ISO 10294-1 : 1996 FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: TEST METHOD
BS EN 61508-1:2010 Functional safety of electrical/electronic/ programmable electronic safety-related systems General requirements
BS EN 13123-1:2001 Windows, doors and shutters. Explosion resistance. Requirements and classification Shock tube
BS 8110-2:1985 STRUCTURAL USE OF CONCRETE - PART 2: CODE OF PRACTICE FOR SPECIAL CIRCUMSTANCES
BS 5309-2:1976 Methods for sampling chemical products Sampling of gases
BS 5266-5:1999 Emergency lighting Specification for component parts of optical fibre systems
BS EN 1147:2001 Portable ladders for fire service use
BS EN 13821:2002 Potentially explosive atmospheres. Explosion prevention and protection. Determination of minimum ignition energy of dust/air mixtures
BS 4994:1987 Specification for design and construction of vessels and tanks in reinforced plastics
BS EN 54-4:1998 Fire detection and fire alarm systems Power supply equipment
BS 6713-2:1986 Explosion protection systems Method for determination of explosion indices of combustible gases in air
BS 5309-1:1976 Methods for sampling chemical products Introduction and general principles
ISO 7149:1982 Continuous handling equipment — Safety code — Special rules
BS 5274:1985 Specification for fire hose reels (water) for fixed installations
BS 5268-4.2(1990) : 1990 STRUCTURAL USE OF TIMBER - FIRE RESISTANCE OF TIMBER STRUCTURES - RECOMMENDATION FOR CALCULATING FIRE RESISTANCE OF TIMBER STUD WALLS AND JOISTED FLOOR CONSTRUCTIONS
BS 6742-4:1990 Electrostatic painting and finishing equipment using flammable materials Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held flock spray guns (energy limit of 0,24 mJ or 5 mJ) and their associated apparatus
BS EN 54-2 : 1998 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
BS EN 61000-4-2:2009 Electromagnetic compatibility (EMC) Testing and measurement techniques. Electrostatic discharge immunity test
BS EN 54-3:2014 Fire detection and fire alarm systems Fire alarm devices. Sounders
BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance
BS 5306-0:1986 Fire extinguishing installations and equipment on premises Guide for the selection of installed systems and other fire equipment
BS 5395-3:1985 Stairs, ladders and walkways Code of practice for the design of industrial type stairs, permanent ladders and walkways
BS EN 54-5 : 2017 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
BS EN 1047-1:2005 Secure storage units. Classification and methods of test for resistance to fire Data cabinets and diskette inserts
BS 7211:1998 Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire
BS EN 60598-1:2015 Luminaires General requirements and tests
IEC TS 60695-7-50:2002 Fire hazard testing - Part 7-50: Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method
BS EN ISO 10093:1999 Plastics. Fire tests. Standard ignition sources
BS 5266-6:1999 Emergency lighting Code of practice for non-electrical low mounted way guidance systems for emergency use. Photoluminescent systems
BS EN 730-1:2002 Gas welding equipment. Safety devices Incorporating a flame (flashback) arrestor
BS 2782-1:Method 140A:1992 Methods of testing plastics. Thermal properties Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
BS EN 1718:1999 Light conveyor belts. Test method for the measurement of the electrostatic field generated by a running light conveyor belt
BS 5041-3:1975 Fire hydrant systems equipment Specification for inlet breechings for dry riser inlets
BS 5588-11:1997 Fire precautions in the design, construction and use of buildings Code of practice for shops, offices, industrial, storage and other similar buildings
IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
BS 6458-2.1:1984 Fire hazard testing for electrotechnical products. Test methods Glow-wire test
BS 6664-2(1986) : 1986 FLASHPOINT OF PETROLEUM AND RELATED PRODUCTS - METHOD FOR DETERMINATION OF FLASHPOINT (CLOSED CUP EQUILIBRIUM METHOD)
BS 476-11:1982 Fire tests on building materials and structures Method for assessing the heat emission from building materials
BS EN 3-6:1996 Portable fire extinguishers Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5
BS EN 1568-2:2008 Fire extinguishing media. Foam concentrates Specification for high expansion foam concentrates for surface application to water-immiscible liquids
DD ENV 1187:2002 Test methods for external fire exposure to roofs
BS 8434-2(2003) : 2003 METHODS OF TEST FOR ASSESSMENT OF THE FIRE INTEGRITY OF ELECTRIC CABLES - PART 2: TEST FOR UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS - BS EN 50200 WITH A 930 DEGREE C FLAME AND WITH WATER SPRAY
BS 5499-5:2002 Graphical symbols and signs. Safety signs, including fire safety signs Signs with specific safety meanings
BS 4553-3:1998 Specification for 600/1000 V single-phase split concentric electric cables Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
BS 7899-2:1999 Code of practice for assessment of hazard to life and health from fire Guidance on methods for the quantification of hazards to life and health and estimation of time to incapacitation and death in fires
BS EN 62040-1-1:2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas
BS 6467-2:1988 Electrical apparatus with protection by enclosure for use in the presence of combustible dusts Guide to selection, installation and maintenance
BS 3187:1978 Specification for electrically conducting rubber flooring
BS 6535-3:1989 Fire extinguishing media Specification for powder
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
BS 5041-1:1987 Fire hydrant systems equipment Specification for landing valves for wet risers
BS EN 3-7 : 2004 PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS
BS EN 13274-4:2001 Respiratory protective devices. Methods of test Flame tests
BS EN 61310-2:2008 Safety of machinery. Indication, marking and actuation Requirements for marking
BS EN 60893-3-6 : 2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON SILICONE RESINS
BS 3900-A11:1974 Methods of test for paints. Tests on liquid paints (excluding chemical tests) Small scale test for combustibility
BS 476-6(1989) : 1989 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS
PD 6512-3:1987 Use of elements of structural fire protection with particular reference to the recommendations given in BS 5588 \'Fire precautions in the design and construction of buildings\' Guide to the fire performance of glass
BS 7273-3:2000 Code of practice for the operation of fire protection measures Electrical actuation of pre-action sprinkler systems
BS EN 60079-7 : 2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
BS EN 81-72:2015 Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts Firefighters lifts
BS EN 1363-2:1999 Fire resistance tests Alternative and additional procedures
BS EN 809 : 1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
BS 476-20:1987 Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles)
BS 7807:1995 Code of practice for design, installation and servicing of integrated systems incorporating fire detection and alarm systems and/or other security systems for buildings other than dwellings
BS EN 54-13:2017 Fire detection and fire alarm systems Compatibility and connectability assessment of system components
BS EN 671-3:2009 Fixed firefighting systems. Hose systems Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose
BS 5588-0:1996 Fire precautions in the design, construction and use of buildings Guide to fire safety codes of practice for particular premises/applications
BS EN 50058:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% (V/V) gas
BS 5225-1:1975 Photometric data for luminaires Photometric measurements
PREN 15198 : DRAFT 2005 METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
BS 476-13:1987 Fire tests on building materials and structures Method of measuring the ignitability of products subjected to thermal irradiance
BS 7327-1:1990 Small fixed fire extinguishers Specification for small fixed halon fire extinguishers
BS EN ISO 17776:2016 Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations
BS IEC 61511-2 : 2003 AMD 15577 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1
BS EN 13541:2012 Glass in building. Security glazing. Testing and classification of resistance against explosion pressure
BS 5839-8:1998 Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning, and maintenance of voice alarm systems
BS 6739:1986 Code of practice for instrumentation in process control systems: installation design and practice
BS 4430-2:1969 Recommendations for the safety of powered industrial trucks Operation and maintenance
BS EN ISO 1523:2002 Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
PD 6503-1:1990 Toxicity of combustion products General
BS 5588-5:2004 Fire precautions in the design, construction and use of buildings Access and facilities for fire-fighting
BS EN ISO 2592:2017 Petroleum and related products. Determination of flash and fire points. Cleveland open cup method
BS EN 50171:2001 Central power supply systems
BS 476-21:1987 Fire tests on building materials and structures Methods for determination of the fire resistance of loadbearing elements of construction
PD 7974-3:2003 Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin (Sub-system 3)
BS ISO TR 9122-3:1993 Toxicity testing of fire effluents Methods for the analysis of gases and vapours in fire effluents
BS EN 60079-26:2015 Explosive atmospheres Equipment with Equipment Protection Level (EPL) Ga
BS EN 13124-1:2001 Windows, doors and shutters. Explosion resistance. Test method Shock tube
BS 476-33:1993 Fire tests on building materials and structures Full-scale room test for surface products
BS 3900-J8(1993) : 1993 METHODS OF TEST FOR PAINTS - TESTING OF COATING POWDERS - CALCULATION OF LOWER EXPLOSION LIMIT OF COATING POWDERS
BS 5041-5:1974 Fire hydrant systems equipment Specification for boxes for foam inlets and dry riser inlets
BS EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material. Safety requirements
BS EN 746-1 : 1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
BS EN ISO 12100-1 : 2003 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
BS 7971-2:2003 Protective clothing and equipment for use in violent situations and in training Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment
BS 6713-3:1986 Explosion protection systems Method for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
BS EN ISO 12241:2008 Thermal insulation for building equipment and industrial Installations. Calculation rules
BS EN 50272-3:2002 Safety requirements for secondary batteries and battery installations Traction batteries
BS EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 12845:2015 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance
BS 5306-6.2:1989 Fire extinguishing installations and equipment on premises. Foam systems Specification for medium and high expansion foam systems
00/541672 DC : DRAFT NOV 2000 BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS
BS KIT 126 : 2003 COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS
BS 5306-1:1976 Fire extinguishing installations and equipment on premises Hydrant systems, hose reels and foam inlets
BIP 2007 : 2003 BASIC GUIDE TO FIRE ENGINEERING
BS 7273-2:1992 Code of practice for the operation of fire protection measures Mechanical actuation of gaseous total flooding and local application extinguishing systems
BS 4841-3:1994 Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Specification for two types of laminated board (roofboards) with auto-adhesively bonded reinforcing facings for use as roofboard thermal insulation for built-up roofs
BS 2000-35(1993) : 1993 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF OPEN FLASH AND FIRE POINT - PENSKY-MARTENS METHOD
BS 476-15:1993 Fire tests on building materials and structures Method for measuring the rate of heat release of products
BS EN 1366-5:2010 Fire resistance tests for service installations Service ducts and shafts
BS ISO 11925-3:1997 Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Multi-source test
BS EN 340:2003 Protective clothing. General requirements
DD ENV 13381-4:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to steel members
PD 7974-4:2003 Application of fire safety engineering principles to the design of buildings Detection of fire and activation of fire protection systems. (Sub-system 4)
BS EN 50381:2004 Transportable ventilated rooms with or without an internal source of release
BS EN 13463-2:2004 Non-electrical equipment for use in potentially explosive atmospheres Protection by flow restricting enclosure \'fr\'
BS 5345-2:1983 Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Classification of hazardous areas
BS ISO/TR 13387-8:1999 Fire safety engineering Life safety. Occupant behaviour, location and condition
BS 8434-1:2003 Methods of test for assessment of the fire integrity of electric cables Test for unprotected small cables for use in emergency circuits. BS EN 50200 with addition of water spray
DD IEC/TS 60695-11-40:2002 Fire hazard testing. Test flames Confirmatory tests. Guidance
BS 6713-4:1986 Explosion protection systems Method for determination of efficacy of explosion suppression systems
DD ENV 13381-7:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to timber members
BS EN 60695-1-30:2017 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process. General guidelines
BS EN 60519-9:2005 Safety in electroheat installations Particular requirements for high-frequency dielectric heating installations
BS EN 14043:2014 High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods
BS EN 3-3:1996 Portable fire extinguishers Construction, resistance to pressure, mechanical tests
BS 5839-3:1988 Fire detection and alarm systems for buildings Specification for automatic release mechanisms for certain fire protection equipment
BS 5041-4:1975 Fire hydrant systems equipment Specification for boxes for landing valves for dry risers
BS EN 12259-4:2000 Fixed firefighting systems. Components for sprinkler and water spray systems Water motor alarms
TH 42065 : 2008 ELECTRICAL EQUIPMENT FOR FLAMMABLE ATMOSPHERES - AN INTERNATIONAL SURVEY OF REGULATIONS, TESTS AND CERTIFICATION REQUIREMENTS
BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
BS 490-11.2:1991 Conveyor and elevator belting. Methods of test for safety Low energy and high energy propane gallery tests
BS 476-10:1983 Fire tests on building materials and structures Guide to the principles and application of fire testing
BS 7982:2001 Guidance on the environmental impact of large-scale fires involving plastics materials
BS EN 61197:1996 Insulating liquids. Linear flame propagation. Test method using a glass-fibre tape
BS EN 60695-2-11:2014 Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
BS 476-24:1987 Fire tests on building materials and structures Method for determination of the fire resistance of ventilation ducts
BS 6467-1:1985 Electrical apparatus with protection by enclosure for use in the presence of combustible dusts Specification for apparatus
BS EN 54-10:2002 Fire detection and fire alarm systems Flame detectors. Point detectors
BS EN 61144:1993 Test method for the determination of oxygen index of insulating liquids
BS 5839-4:1988 Fire detection and alarm systems for buildings Specification for control and indicating equipment
BS 3212:1991 Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations
BS 6244:1982 Code of practice for stationary air compressors
BS 6207-3:2001 Mineral insulated cables with a rated voltage not exceeding 750 V Guide to use
BS 5410-2:1978 Code of practice for oil firing Installations of 45 kW and above output capacity for space heating, hot water and steam supply services
BS EN 136:1998 Respiratory protective devices. Full face masks. Requirements, testing, marking
BS EN 60079-1:2014 Explosive atmospheres Equipment protection by flameproof enclosures \'d\'
BS 8300:2001 Design of buildings and their approaches to meet the needs of disabled people. Code of practice
PD 7974-7:2003 Application of fire safety engineering principles to the design of buildings Probabilistic risk assessment
BS 5395-2:1984 Stairs, ladders and walkways Code of practice for the design of helical and spiral stairs
BS EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS 8218:1998 Code of practice for mastic asphalt roofing
BS 5442-1:1989 Classification of adhesives for construction Classification of adhesives for use with flooring materials
BS 5839-6:2004 Fire detection and fire alarm systems for buildings Code of practice for the design, installation and maintenance of fire detection and fire alarm systems in dwellings
BS EN 420 : 2003 PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS
BS 7974:2001 Application of fire safety engineering principles to the design of buildings. Code of practice
BS 4422:2005 Fire. Vocabulary
BS EN 50266-1:2001 Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables Apparatus
BS EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
BS EN 179:2008 Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods
BS PD TR 13480-7 : 2002 METALLIC INDUSTRIAL PIPING - GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES
BS EN 60801-2:1993 Electromagnetic compatibility for industrial-process measurement and control equipment Electrostatic discharge requirements
BS EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
BS EN 13480-4:2017 Metallic industrial piping Fabrication and installation
BS 476-12:1991 Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement
BS EN 1866:2005 Mobile fire extinguishers
BS 5173-103.13:1994 Methods of test for rubber and plastics hoses and hose assemblies. Physical tests Determination of resistance to fire
IEC 61241-2-1:1994 Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust
BS EN ISO 15029-1:2000 Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray flame persistence. Hollow-cone nozzle method
BS 1230-1:1985 Gypsum plasterboard Specification for plasterboard excluding materials submitted to secondary operations
BS EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\'
BS 6287:1982 Code of practice for safe operation of traction batteries
BS 3958-6:1972 Thermal insulating materials Finishing materials; hard setting composition, self-setting cement and gypsum plaster
BS EN 13673-1:2003 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours Determination of the maximum explosion pressure
DD IEC/TS 60695-11-4:2004 Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method
PREN 14351-2 : DRAFT 2014 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS
BS EN 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions Test for vertical flame propagation for a single small insulated wire or cable. Apparatus
BS 5309-4:1976 Methods for sampling chemical products Sampling of solids
BS 5588-1:1990 Fire precautions in the design, construction and use of buildings Code of practice for residential buildings
BS 5803-4:1985 Thermal insulation for use in pitched roof spaces in dwellings Methods for determining flammability and resistance to smouldering
BS 6165:2002 Specification for small disposable fire extinguishers of the aerosol type
BS 476-31.1:1983 Fire tests on building materials and structures Methods for measuring smoke penetration through doorsets and shutter assemblies - Method of measurement under ambient temperature conditions
BS 3958-4:1982 Thermal insulating materials Bonded preformed man-made mineral fibre pipe sections
BS 5499-4:2000 Safety signs, including fire safety signs. Code of practice for escape route signing
BS EN 1593:1999 Non-destructive testing. Leak testing. Bubble emission techniques
BS ISO 13344:2015 Estimation of the lethal toxic potency of fire effluents
BS 7944:1999 Type 1 heavy duty fire blankets and type 2 heavy duty heat protective blankets
BS ISO TR 5925-2:1997 Fire tests. Smoke control door and shutter assemblies Commentary on test method and test data application
BS 3379:1975 Specification for flexible urethane foam for loadbearing applications
BS 6941:1988 Specification for electrical apparatus for explosive atmospheres with type of protection N
BS EN 2:1992 Classification of fires
DD IEC/TS 60695-7-51:2002 Fire hazard testing. Toxicity of fire effluent Estimation of toxic potency. Calculation and interpretation of test results
BS EN 694:2014 Fire-fighting hoses. Semi-rigid hoses for fixed systems
BS 6713-1:1986 Explosion protection systems Method for determination of explosion indices of combustible dusts in air
BS 7244:1990 Specification for flame arresters for general use
BIP 2003 : 2003 FIRE EXTINGUISHING SYSTEMS - A GUIDE TO THE TYPES, APPLICATION AND CONSIDERATIONS
BS 7629-2:1997 Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multipair cables
BS EN 50266-2-4:2001 Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category C
BS EN 12416-1:2001 Fixed firefighting systems. Powder systems Requirements and test methods for components
BS EN 61340-4-3:2002 Electrostatics. Standard test methods for specific applications Footwear
BS 5427-1:1996 Code of practice for the use of profiled sheet for roof and wall cladding on buildings Design
BS 5516-1:2004 Patent glazing and sloping glazing for buildings Code of practice for design and installation of sloping and vertical patent glazing
04/30117071 DC : DRAFT JUL 2004 EN 14994 - GAS EXPLOSION VENTING PROTECTIVE SYSTEMS
BS 5306-3:2003 Fire extinguishing installations and equipment on premises Code of practice for the inspection and maintenance of portable fire extinguishers
BS EN 1149-1:2006 Protective clothing. Electrostatic properties Test method for measurement of surface resistivity
BS 7990:2003 Tube furnace method for the determination of toxic product yields in fire effluents
BS 7036-2:1996 Code of practice for safety at powered doors for pedestrian use Straight and curved sliding doors and prismatic and folding doors
BS 7346-1:1990 Components for smoke and heat control systems Specification for natural smoke and heat exhaust ventilators
BS 5266-3:1981 Emergency lighting Specification for small power relays (electromagnetic) for emergency lighting applications up to and including 32 A
BS KIT 141 : 2004 PD 7974 SERIES - FIRE SAFETY ENGINEERING PRINCIPLES FOR THE DESIGN OF BUILDINGS
IEC 62305-3:2010 Protection against lightning - Part 3: Physical damage to structures and life hazard
BS 3566:1982 Specification for lightweight salvage sheets for fire service use
BS EN 167:2002 Personal eye protection. Optical test methods
BS 6262:1982 Code of practice for glazing for buildings
BS EN 1366-3:2009 Fire resistance tests for service installations Penetration seals
BS 5173-103.6:1990 Methods of test for rubber and plastics hoses and hose assemblies. Physical tests Determination of ignitability of lining
BS 5839-9:2003 Fire detection and alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems
BS EN 50057:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% lower explosive limit
BS EN 13478 : 2002 SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
BS 5598-2:1979 Methods of sampling and test for halogenated hydrocarbons Sampling of liquefied gases
02/122678 DC : DRAFT JULY 2002 EN 14489 - FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION OF THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT
BS EN 367:1992 Protective clothing. Protection against heat and fire. Method for determining heat transmission on exposure to flame
BS 5422:2001 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C
BS EN 60332-1-1 : 2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS
BS 476-32:1989 Fire tests on building materials and structures Guide to full scale fire tests within buildings
BS 7481:1992 Code of practice for testing venting systems and shields for lead-acid starter batteries
IEC 61241-14:2004 Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
BS EN 1726-2:2000 Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
BS 5266-2:1998 Emergency lighting Code of practice for electrical low mounted way guidance systems for emergency use
BS 476-22:1987 Fire tests on building materials and structures Method for determination of the fire resistance of non-loadbearing elements of construction
BS 6767-2:1998 Transportable accommodation units Recommendations for design and installation of services and fittings with guidance on transportation, siting and aspects relating to habitation
BS 5588-7:1997 Fire precautions in the design, construction and use of buildings Code of practice for the incorporation of atria in buildings
BS EN 3-2:1996 Portable fire extinguishers Tightness, dielectric test, tamping test, special provisions
BS 5946:1980 Method of test for determination of the punking behaviour of phenol-formaldehyde foam
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
BS EN 60893-2:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test
BS EN 1088 : 1995 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION

View more information
$733.34
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more