• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AMS 2825 : 1987

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

MATERIAL SAFETY DATA SHEETS
Available format(s)

Hardcopy , PDF

Superseded date

05-01-2010

Language(s)

English

Published date

01-01-1987

1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGMENT
7 REJECTIONS
8 NOTES

Defines requirements for preparing Material Safety Data Sheets for the provision of information concerning the harmful or hazardous nature of materials to facilitate purchaser's compliance with U.S. Department of Labor, Occupational Safety and Health Administration

Committee
AMS-B
DocumentType
Standard
Pages
4
PublisherName
SAE International
Status
Superseded
SupersededBy

SAE AMS 3821 : 2015 CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED 7781 STYLE FABRIC, FLAME RESISTANT
SAE AMS 1450 : 1998 DISINFECTANT (INSECTICIDE), AIRCRAFT
SAE AMS 1379 : 2007 COMPOUND, ALKALINE RUST REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS
SAE AMS 3731 : 2016 POTTING COMPOUND, EPOXY, BISPHENOL A-TYPE
SAE AMS 1384 : 2007 ACID, INHIBITED PHOSPHORIC AIRCRAFT TURBINE ENGINE COMPONENTS ROOM TEMPERATURE APPLICATION
SAE AMS 3695 : 2014 ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING
SAE AMS 1640 : 2011 CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES
SAE AMS 1428 : 2017 FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4
SAE AS 5272 : 2016 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION
SAE AMS 3126 : 2013 Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder
SAE AMS 3572 : 2016 RESIN POLYURETHANE, FOAM-IN-PLACE, RIGID
SAE AMS1428L:2023 Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV
SAE AMS3023C:2022 Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material
SAE AMS 3733 : 2015 POTTING COMPOUND, EPOXY, TWO PART, HIGHLY FILLED, HEAT CURE, HIGH COMPRESSIVE STRENGTH
SAE AMS 3831 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH
SAE AMS 3107 : 1983(R2014) PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING
SAE AMS 1426 : 2016 FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS GLYCOL BASE
SAE AMS 3826 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER RESIN IMPREGNATED, 1581 AND 7781 TYPE FABRIC
SAE AMS 1535C : 2008 CLEANER, TRANSPARENT PLASTIC
SAE AMS 1725 : 1986 SKIN PROTECTIVE COMPOUND, CHEMICAL BARRIER
SAE AMS 3897 : 2016 CLOTH, CARBON FIBER, RESIN IMPREGNATED
SAE AMS 2535 : 2015 COATING, VAPOR DEPOSITED POLY-MONOCHLORO-PARA-XYLYLENE FOR MICROCIRCUITS
SAE AMS 1545 : 2015 CLEANER, THRUST REVERSER, ALKALINE, WATER-BASE
SAE AMS 1550 : 2012 CLEANER, WATER BASE, AIRCRAFT INTERIOR HARD SURFACE MATERIALS
SAE AMS 3603 : 2002 PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS
SAE AMS 3828 : 2016 GLASS ROVING, EPOXY RESIN PREIMPREGNATED, TYPE E GLASS
SAE AMS 3619 : 2016 RESIN, POLYIMIDE, LAMINATING, HIGH TEMPERATURE RESISTANT, 315 DEGREES C (599 DEGREES F)
SAE AMS 3688 : 2014 ADHESIVE, FOAMING, HONEYCOMB CORE SPLICE, STRUCTURAL, -55 DEGREES C TO +82 DEGREES C (-65 DEGREES F TO +180 DEGREES F)
SAE AMS 3689 : 2014 ADHESIVE, FOAMING, HONEYCOMB, CORE SPLICE, STRUCTURAL, -54 TO +177 DEGREES C (-65 TO +350 DEGREES F)
SAE AMS 3100 : 2013 ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS
SAE AMS 1431 : 2012 COMPOUND, SOLID RUNWAY AND TAXIWAY DEICING/ANTI-ICING
SAE AMS 3753 : 2016 MICROSPHERES, CARBON, HOLLOW
SAE AMS 3686 : 2014 ADHESIVE, POLYIMIDE RESIN, FILM AND PASTE HIGH TEMPERATURE RESISTANT, 315 DEGREES C (599 DEGREES F)
SAE AMS 1383 : 2007 OXIDE CONDITIONER, ALKALINE PERMANGANATE AIRCRAFT TURBINE ENGINE COMPONENTS
SAE AMS 1380 : 2007 SCALE CONDITIONER, ALKALINE, AIRCRAFT TURBINE ENGINE COMPONENTS
SAE AMS 1320 : 1995 REMOVER, DECAL ADHESIVE
SAE AMS 3906 : 2016 GLASS TAPE AND FLAT SHEET, NON-WOVEN CLOTH EPOXY RESIN IMPREGNATED, FOR HAND AND MACHINE LAYUP
SAE AMS 3023 : 2017 FLUID, REFERENCE FOR TESTING POLYOL ESTER (AND DIESTER) RESISTANT MATERIAL
SAE AMS 3829 : 2016 CLOTH, TYPE 'E' GLASS, STYLE 7781 FABRIC, SOLUTION-ADDITION-TYPE PMR 15 POLYIMIDE RESIN IMPREGNATED
SAE AMS 3729 : 2014 EPOXY RESIN MATRIX, THERMOSETTING MODERATE TEMPERATURE RESISTANT, UNFILLED
MIL-P-20689 Revision D:1988 PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS)
SAE AMS 3847 : 1994(S2016) CLOTH, QUARTZ, 'B' STAGE POLYIMIDE RESIN IMPREGNATED, STYLE 581 FABRIC, 315 DEGREES C (599 DEGREES F)
MIL-PRF-46190 Revision A:1997 PREPEGS, WOVEN FABRIC, CARBON FIBER, RESIN IMPREGNATED
SAE AMS I 83387 : 2016 INSPECTION PROCESS, MAGNETIC RUBBER
SAE AMS 3845 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE ADDITION CURE POLYIMIDE-RESIN-IMPREGNATED
SAE AMS 3159 : 2017 LEAK TEST SOLUTION - LIQUID OXYGEN COMPATIBLE
SAE AMS 3077 A : 1994(S2018) COMPOUND, CORROSION PREVENTIVE, SOFT FILM, THIXOTROPIC, COLD APPLICATION
SAE AMS 1382 : 2007 OXIDE REMOVER COMPOUND, ACIDIC AIRCRAFT TURBINE ENGINE COMPONENTS
SAE AMS 1375 : 2012 REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS
SAE AMS 3834 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH
SAE AMS 3021 : 2017 FLUID, REFERENCE FOR TESTING DI-ESTER (POLYOL) RESISTANT MATERIAL
SAE AMS 3844 : 2016 Cloth, Type "E" Glass, Style 7781 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated
SAE AMS 1526 : 2008 CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE
SAE AMS 3359 : 2016 SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 TO 400 POISES (20 TO 40 PAS) VISCOSITY
SAE AMS 1385 : 2004 COMPOUND, HOT CARBON AND PAINT REMOVER AIRCRAFT TURBINE ENGINE COMPONENTS
SAE AMS 1370 : 2008 COMPOUND, RUST REMOVER, LIQUID, AIRCRAFT AND AEROSPACE COMPONENTS, IMMERSION TANK METHOD
SAE AMS 3705 : 2014 EPOXY RESIN, CYCLOALIPHATIC LIQUID
SAE AMS 1548 : 2017 CLEANER, TURBINE ENGINE GAS PATH, SOLVENT EMULSION TYPE
SAE AMS 1377 : 2012 REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT
SAE AMS 3091 : 2014 MOLD RELEASE AGENT
SAE AMS 3681F : 2017(S2019) ADHESIVE, ELECTRICALLY CONDUCTIVE, SILVER-FILLED EPOXY RESIN
SAE AMS 3692 : 2014 ADHESIVE COMPOUND, EPOXY RESIN, HIGH TEMPERATURE APPLICATION
SAE AMS 3109 : 2014 PRIMER, ADHESIVE, ELECTRODEPOSITED -55 TO +82 DEGREES C (-67 TO +180 DEGREES F)
SAE AMS 3732 : 2015 POTTING COMPOUND, EPOXY ONE PART, FILLED, HEAT CURE, LOW CTE
SAE AMS 3116 A : 2005 PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE
SAE AMS 3185 : 1999 HYDRAULIC FLUID, NONFLAMMABLE CHLOROTRIFLUOROETHYLENE (CTFE) BASE
SAE AMS 1376 : 1998 REMOVER, EPOXY PAINT, ACID TYPE, THICKENED
SAE AMS 1386 : 2004 COMPOUND, SILICONE RUBBER REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATIONS
SAE AMS 3020 : 2013 OIL, REFERENCE, FOR 'L' STOCK RUBBER TESTING
SAE AMS 1388 : 2008 REMOVER, TEMPORARY COATING, ALKALINE TYPE, WATER BASE
SAE AMS 3867 : 2016 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED
SAE AMS 1374 : 2004 REMOVER, POLYURETHANE/EPOXY PAINT, ALKALINE, HOT-TANK TYPE
SAE AMS 3895 : 2016 BROADGOODS AND TAPE, CARBON FIBER-EPOXY RESIN IMPREGNATED MULTI-PLY, UNIFORM FIBER
SAE AMS 3267 : 1992 SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES
SAE AMS 1432 : 1995 FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS, POTASSIUM ACETATE BASE
SAE AMS 3849 : 2016 CLOTH, QUARTZ, STYLE 581 FABRIC - HOT MELT, ADDITION TYPE, POLYIMIDE RESIN IMPREGNATED
SAE AMS 3704 : 2016 ADHESIVE, CONTACT, POLYCHLOROPRENE (CR) RUBBER, RESIN MODIFIED
SAE AMS 3259 : 1997 SEALING COMPOUND, POLYTHIOETHER - NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 DEGREE F (182 DEGREE C)
SAE AMS 1539:1996(S2018) CLEANING COMPOUND, TERPENE, CIRCUIT BOARD CLEANER
SAE AMS 3894 : 2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated
SAE AMS 1371 : 2007 COMPOUND, RUST REMOVER, SOLID/POWDER AIRCRAFT AND AEROSPACE COMPONENTS, IMMERSION TANK METHOD
SAE MAM 3053 : 2012 GREASE, WATER RESISTANT POLYALPHAOLEFIN BASE
SAE AMS 1378 : 1995 COMPOUND, CARBON SOIL AND PAINT REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATION
SAE AMS 1387B : 2004(S2018) REMOVER, ANTI GALLING COMPOUND, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATION
SAE AMS 3085 : 2016 FLUID, REFERENCE FOR TESTING AS5780 HPC CLASS (POLYOL) RESISTANT MATERIAL (ALSO KNOWN AS EASTMAN REFERENCE OIL 300)
MIL L 46197 : (1) LAMINATE: HIGH STRENGTH GLASS, FABRIC REINFORCED, POLYESTER RESIN PREIMPREGNATED
SAE AMS 3684 : 2016 RESIN, POLYIMIDE, SEALING HIGH-TEMPERATURE RESISTANT, 315 DEGREES C (600 DEGREES F) UNFILLED
SAE AMS 3728 : 2014 EPOXY CRESOL NOVOLAC RESIN LOW MOLECULAR WEIGHT
SAE AMS 1659 : 1991 COATING, SOIL BARRIER, SEMI-PERMANENT
SAE AMS 1527 : 2014 CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING
SAE AMS 1540 : 2015 CLEANER, THRUST REVERSER, WATER-BASE
SAE AMS 1435 : 2012 FLUID, GENERIC, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS
SAE AMS 3144 : 2012 PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS
SAE AMS 1451 : 1998 DISINFECTANT, AIRCRAFT FOR USE IN CARGO COMPARTMENTS
SAE ARP 4118 : 2013 ISOLATION AND CORROSION PROTECTION OF DISSIMILAR MATERIALS, CARBON COMPOSITE STRUCTURE REPAIR
SAE AMS 3136 : 2016 COATING MATERIAL, PHENOLIC RESIN, PTFE FILLED PIGMENTED, 150 DEGREE C (302 DEGREE F) CURE
SAE AMS 3827 : 2016 Cloth, Type "E” Glass, “B” Stage Polyester-Resin-Impregnated 7781 Style Fabric, Flame Resistant
SAE ARP 1611 : 2014 QUALITY INSPECTION PROCEDURE, COMPOSITES TRACER FLUOROSCOPY AND RADIOGRAPHY
SAE AMS 3167 : 2005 SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS
SAE AMS 1541 : 2005 CLEANER, FUEL DROP TANK, WATER-SOLUBLE
SAE AMS1454A:2010(S2023) Cleaning/Scale Removing Compound Aircraft Vacuum Toilet Systems
SAE AMS1541D:2005(S2023) Cleaner, Fuel Drop Tank Water Soluble

View more information
$116.63
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more