SAE AMS6350N
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
Hardcopy , PDF
13-04-2020
English
19-12-2015
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
DevelopmentNote |
Supersedes SAE AMS 6355 (07/1999) Supersedes SAE AMS S 18728. (07/2006)
|
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
Standards | Relationship |
MIL-S-18729 Revision C:1965 | Similar to |
SAE AMS 1375 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
SAE AMS2644F | Inspection Material, Penetrant |
MIL-DTL-613 Revision D:2014 | Grapnels, Marine, Trip Wire, and Crash Truck |
SAE AIR 5479 : 2017 | ENVIRONMENTALLY COMPLIANT PROCESSES FOR LANDING GEAR |
SAE AMS2437C | Coating, Plasma Spray Deposition |
SAE MA1573A | Nut, Self-Locking - Steel, Class 1100 MPa/235 °C, MJ Thread Procurement Specification For, Metric |
SAE AMS 6457E : 2017 | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
SAE AMSP5315B | Acrylonitrile-butadiene (NBR) Rubber For Fuel-Resistant Seals 60 to 70 |
BS M 75:1994 | Aircraft de-icing/anti-icing Newtonian fluids, ISO type I |
SAE AMS 1377 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
SAE AMS3158C | Solution, Fluorescent Penetrant Water Base for LOX Compatibility |
MIL PRF 0032287 : 0 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
SAE AMS6375D | Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, Environment Controlled Packaging |
SAE AMS2484B | Blackening Solution for Steel Touch-Up Method |
MIL-STD-1884 Revision A:1991 | COATING, PLASMA SPRAY DEPOSITION |
SAE AMSP5510A | O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F) |
MIL-PRF-32287 Revision A:2011 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
SAE AS269J | Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts |
SAE AMS6461L | Steel, Welding Wire 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) Vacuum Melted, Environment Controlled Packaging |
SAE AS1241D | Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft |
MIL-DTL-5521 Revision C:2007 | Washer, Aircraft Hydraulic Packing Back-Up |
MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
SAE AMS 7258 : 2001 | RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER FUEL RESISTANT, LOW SHRINKAGE 65-75 |
SAE AMS2370L | Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock |
ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
SAE AMS2301K | Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure |
ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
SAE AMS 2807B : 2012 | IDENTIFICATION, CARBON AND LOW-ALLOY STEELS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, SHEET, STRIP, PLATE, AND AIRCRAFT TUBING |
SAE AMS2259E | Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels |
ASTM E 290 : 2014 : REDLINE | Standard Test Methods for Bend Testing of Material for Ductility |
SAE AMS 2252 : 2016 | TOLERANCES - LOW-ALLOY STEEL SHEET, STRIP, AND PLATE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.