Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AS 4897 : 1994

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR

Available format(s)

Hardcopy , PDF

Superseded date

03-09-2019

Language(s)

English

Published date

01-01-1994

1 SCOPE
2 APPLICABLE DOCUMENTS
3 REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 NOTES

Specifies the requirements for polytetrafluoroethylene (PTFE) hose assemblies for use in aerospace fuel and lubricating oil systems at temperatures between -67 and 450 degrees F and at operating pressures.

Committee
G-3
DocumentType
Standard
Pages
18
PublisherName
SAE International
Status
Superseded
SupersededBy

SAE AS 150 : 2017 HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE
SAE AIR 5693 : 2014 COMPATIBILITY OF PTFE HOSE ASSEMBLIES WITH TYPICAL FLUIDS FOUND IN AEROSPACE APPLICATIONS

SAE AMS 5689 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
SAE AMS5659S : 2016 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br>
SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE ARP 1835 : 2013 PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES
SAE ARP 603 : 1985 IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES
SAE AS 611F : 2010 HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
ASTM A 262 : 2015 : REDLINE Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
MIL-STD-130 Revision N:2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
QQ-P-35 Revision C:1988 PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL
NAS1760:2015 FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR
MIL-T-8808 Revision B:1981 TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY
MIL H 25579 : E HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR
SAE AS 1708 : 2017 FITTING END, INTERNAL FLARE, DESIGN STANDARD
SAE AMS 5643 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AS 4395 : 2013 FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AMS 5743 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED
SAE AMS 5697 : 2012 STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED
SAE AMS 5690 : 2015 STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
SAE AS 1055 : 2013 FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS
ASTM D 792 : 2013 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
SAE ARP 1153 : 2014 METHOD FOR DETERMINING RELATIVE SPECIFIC GRAVITY POLYTETRAFLUOROETHYLENE TUBING
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
SAE ARP 908 : 2013 TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING
SAE AMS 4965 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
MS33656 Revision J:1987 FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL
MIL-STD-831 Base Document:1963 TEST REPORTS, PREPARATION OF
SAE AMS 5637 : 2012 STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH
SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
SAE AMS 4945 : 2014 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED
MIL-S-8879 Revision C:1991 SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR
SAE AMS 5685 : 2001 STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR - 11.5NI (SAE 30305), SOLUTION HEAT TREATED, COLD FINISHED
QQ-S-763 Revision F:1996 STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT
SAE AS 2078 : 2015 TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE)
SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE AS 1946 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC
SAE AS 4375 : 2013 FITTING END, FLARELESS, DESIGN STANDARD
MIL-C-5501 Revision G:1989 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL
SAE AS 150 : 2014 HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE
SAE AMS5644E:1964(S2017) STEEL, BARS AND FORGINGS, CORROSION RESISTANT, 17CR - 7NI - 1AL
MS33514 Revision G:1990 FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL (ASG)
SAE AMS 4928 : 2016 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
MIL T 31000 : 0 TECHNICAL DATA PACKAGES - GENERAL SPECIFICATION FOR

View more information
$232.31
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more