SAE J 211/2 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INSTRUMENTATION FOR IMPACT TEST - PART 2: PHOTOGRAPHIC INSTRUMENTATION
Hardcopy , PDF
03-10-2023
English
01-01-2014
1. Scope
2. References
3. Definitions
4. Performances
5. Image File Format
6. Notes
APPENDIX A - RECOMMENDED PROCEDURE FOR
DETERMINING THE PERFORMANCE OF AN
OPTICAL DATA CHANNEL
Describes criteria of performance for an optical data channel when numerical time and space data are taken from the images to analyze impact test results.
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ASTM F 2766 : 2011 : R2015 | Standard Test Method for Boat Barriers |
ISO 12353-2:2003 | Road vehicles — Traffic accident analysis — Part 2: Guidelines for the use of impact severity measures |
SAE J 3058 : 2016 | AMBULANCE INTERIOR STORAGE COMPARTMENT INTEGRITY |
SAE J 1727 : 2015 | CALCULATION GUIDELINES FOR IMPACT TESTING |
FAA AC 20-146 : 2003 | METHODOLOGY FOR DYNAMIC SEAT CERTIFICATION BY ANALYSIS FOR USE IN PARTS 23, 25, 27, AND 29 AIRPLANES AND ROTORCRAFT |
SAE J 2418 : 2015 | OCCUPANT RESTRAINT DYNAMIC SYSTEM EVALUATION - FRONTAL IMPACT HEAVY TRUCKS |
SAE J 850 : 2015 | FIXED RIGID BARRIER COLLISION TESTS |
SAE AS 6316 : 2017 | PERFORMANCE STANDARDS FOR OBLIQUE FACING PASSENGER SEATS IN TRANSPORT AIRCRAFT |
BS ISO 15829:2013 | Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation |
SAE J 3044 : 2016 | OCCUPANT RESTRAINT AND EQUIPMENT MOUNTING INTEGRITY - REAR IMPACT AMBULANCE PATIENT COMPARTMENT |
SAE J 3057 : 2017 | AMBULANCE MODULAR BODY EVALUATION-QUASI-STATIC LOADING FOR TYPE 1 AND TYPE 3 MODULAR AMBULANCE BODIES |
SAE J 3026 : 2016 | AMBULANCE PATIENT COMPARTMENT SEATING INTEGRITY AND OCCUPANT RESTRAINT |
ASTM F 3016/F3016M : 2014 | Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds |
SAE J3095:2023 | Linear Impactor Calibration Procedure |
SAE J 3102 : 2017 | AMBULANCE PATIENT COMPARTMENT STRUCTURAL INTEGRITY TEST TO SUPPORT SAE J3027 COMPLIANT LITTER SYSTEMS |
SAE AS 8049/1 : 2016 | PERFORMANCE STANDARDS FOR SIDE-FACING SEATS IN CIVIL ROTORCRAFT, TRANSPORT AIRCRAFT, AND GENERAL AVIATION AIRCRAFT |
SAE J 2956 : 2016 | OCCUPANT RESTRAINT AND EQUIPMENT MOUNTING INTEGRITY - SIDE IMPACT AMBULANCE PATIENT COMPARTMENT |
SAE J 972 : 2015 | MOVING RIGID BARRIER COLLISION TESTS |
SAE AS 8049 : 2015 | PERFORMANCE STANDARD FOR SEATS IN CIVIL ROTORCRAFT, TRANSPORT AIRCRAFT, AND GENERAL AVIATION AIRCRAFT |
SAE J 2424 : 2013 | FREE MOTION HEADFORM IMPACT TESTS OF HEAVY TRUCK CAB INTERIORS |
ISO 8721:2010 | Road vehicles Measurement techniques in impact tests Optical instrumentation |
BS ISO 7862:2004 | Road vehicles. Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions |
BS ISO 12353-2:2003 | Road vehicles. Traffic accident analysis Guidelines for the use of impact severity measures |
09/30155228 DC : 0 | BS ISO 15829 - ROAD VEHICLES - SIDE IMPACT TEST PROCEDURES FOR THE EVALUATION OF OCCUPANT INTERACTIONS WITH SIDE AIRBAGS BY POLE IMPACT SIMULATION |
BS ISO 3984:2004 | Road vehicles. Rear moving barrier impact test procedure |
SAE J 2422 : 2010 | CAB ROOF STRENGTH EVALUATION - QUASI-STATIC LOADING HEAVY TRUCKS |
ISO 3984:2004 | Road vehicles Rear moving barrier impact test procedure |
SAE J 374 : 2015 | VEHICLE ROOF STRENGTH TEST PROCEDURE |
SAE J 2917 : 2016 | OCCUPANT RESTRAINT AND EQUIPMENT MOUNTING INTEGRITY - FRONTAL IMPACT AMBULANCE PATIENT COMPARTMENT |
SAE J 2092 : 1999 | TESTING OF WHEELCHAIR LIFTS FOR ENTRY TO OR EXIT FROM A PERSONALLY LICENSED VEHICLE |
SAE J 3095 : 2016 | LINEAR IMPACTOR CALIBRATION PROCEDURE |
ASTM F 2766:2011 | Standard Test Method for Boat Barriers |
SAE J 2937 : 2016 | LINEAR IMPACT PROCEDURE FOR OCCUPANT EJECTION PROTECTION |
SAE J 3027 : 2016 | AMBULANCE LITTER INTEGRITY, RETENTION, AND PATIENT RESTRAINT |
SAE J 2419 : 2017 | OCCUPANT RESTRAINT SYSTEM EVALUATION - FRONTAL IMPACT SYSTEM - LEVEL HEAVY TRUCKS |
ISO 7862:2004 | Road vehicles — Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions |
ASTM F 2656 : 2007 | Standard Test Method for Vehicle Crash Testing of Perimeter Barriers |
ISO 15828:2004 | Road vehicles — Offset frontal impact test procedure |
ISO 15829:2013 | Road vehicles Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation |
SAE J 3059 : 2017 | AMBULANCE PATIENT COMPARTMENT SEATED OCCUPANT EXCURSION ZONE EVALUATION |
PD ISO/TR 14933:2012 | Road vehicles. Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags |
SAE USCAR 24 : 2013 | USCAR INFLATOR TECHNICAL REQUIREMENTS AND VALIDATION |
UNE-ISO 3984:2016 | Road vehicles. Rear moving barrier impact test procedure |
BS ISO 15828:2004 | Road vehicles. Offset frontal impact test procedure |
SAE ARP 5482 : 2003(S2011) | Photometric Data Acquisition Procedures for Impact Test(STABILIZED Nov 2011) |
SAE J 3043 : 2014 | AMBULANCE EQUIPMENT MOUNT DEVICE OR SYSTEMS |
ISO/TR 14933:2012 | Road vehicles Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags |
SAE ARP 5765 : 2015 | ANALYTICAL METHODS FOR AIRCRAFT SEAT DESIGN AND EVALUATION |
SAE J 2481 : 2013 | DYNAMIC SIMULATION SLED TESTING |
SAE J 2423 : 1998 | CAB ROOF STRENGTH EVALUATION - DYNAMIC LOADING HEAVY TRUCKS |
SAE J 2961 : 2012 | LINEAR IMPACT TEST FOR PASSENGER AIRBAG MODULES COMPONENT EVALUATION |
SAE J 2426 : 2015 | OCCUPANT RESTRAINT SYSTEM EVALUATION - LATERAL ROLLOVER SYSTEM-LEVEL HEAVY TRUCKS |
SAE J 2858 : 2017 | HYBRID 3 TEN-YEAR-OLD CHILD DUMMY USER'S MANUAL |
SAE J 2425 : 2013 | STEERING CONTROL SYSTEMS - LABORATORY TEST PROCEDURE HEAVY TRUCKS |
SAE ARP 6316 : 2016 | PERFORMANCE STANDARDS FOR OBLIQUE FACING PASSENGER SEATS IN TRANSPORT AIRCRAFT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.