Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE J 533 : 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

FLARES FOR TUBING

Available format(s)

Hardcopy , PDF

Superseded date

29-05-2020

Language(s)

English

Published date

08-02-2017

1. SCOPE
2. REFERENCES
3. GENERAL SPECIFICATIONS
4. PERFORMANCE REQUIREMENT
5. NOTES

Describes specifications and performance requirements for 37 degrees and 45 degrees single and double flares for tube ends intended for use with SAE J512, SAE J513, SAE J514, and ISO 8434-2 connectors.

DocumentType
Revision
Pages
10
PublisherName
SAE International
Status
Superseded
SupersededBy
Supersedes

ANSI B93.11M : 1981 SEAMLESS LOW CARBON STEEL HYDRAULIC LINE TUBING,
ASTM A 254/A254M : 2012 : REDLINE Standard Specification for Copper-Brazed Steel Tubing
SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
NFPA 1192 : 2018 RECREATIONAL VEHICLES
NFPA 54 : 2018 NATIONAL FUEL GAS CODE
ANSI Z223.1 : 2018 NATIONAL FUEL GAS CODE
SAE J 1650 : 2011 SEAMLESS COPPER-NICKEL 90-10 TUBING
ASTM A 254 : 1997 : R2007 Standard Specification for Copper-Brazed Steel Tubing
SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
SAE J 514 : 2012 HYDRAULIC TUBE FITTINGS
SAE J 524 : 2016 SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
NFPA 501C : 1996 RECREATIONAL VEHICLES
ASTM A 254 : 1997 : R2002 Standard Specification for Copper-Brazed Steel Tubing
SAE J 2467 : 2015 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
SAE J 1290 : 2012 AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC TUBE CONNECTIONS
ASTM B 469 : 1994 Standard Specification for Seamless Copper-Alloy Tubes for Pressure Applications (Withdrawn 2000)
SAE J 527 : 2017 BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING
SAE J 525 : 2016 WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
SAE J 2435 : 2015 WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING
SAE J 2467 : 2020 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
I.S. 808:2002 SPECIFICATION FOR CNG FUELLED VEHICLES
ASTM A 254 : 1997 Standard Specification for Copper-Brazed Steel Tubing
SAE J 356 : 2013 WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING
SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
SAE J 2551 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS
SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
SAE J512 : 1997(R2017) AUTOMOTIVE TUBE FITTINGS
SAE J 513 : 1999 REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS
SAE J 2613 : 2017 WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING
SAE J 2614 : 2018 WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING
SAE AS 4775 : 2017 AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS
SAE J 526 : 2016 WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING
SAE ARP 1247 : 2018 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS

ISO 5598:2008 Fluid power systems and components Vocabulary
ASME Y14.5 : 2009 DIMENSIONING AND TOLERANCING
ISO 4399:1995 Fluid power systems and components Connectors and associated components Nominal pressures
SAE J 2879 : 2011 AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC HYDRAULIC TUBE CONNECTIONS FOR INVERTED FLARES
ISO 10583:1993 Aerospace fluid systems — Test methods for tube/fitting assemblies
ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies
ISO 4397:2011 Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes
SAE J 1290 : 2012 AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC TUBE CONNECTIONS
SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
SAE J 513 : 1999 REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS
SAE J 1273 : 2014 RECOMMENDED PRACTICES FOR HYDRAULIC HOSE ASSEMBLIES
SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
SAE J 356 : 2013 WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING
ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
SAE J 2614 : 2009 WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
SAE J 2435 : 2015 WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING
SAE J 514 : 2012 HYDRAULIC TUBE FITTINGS
SAE J 526 : 2016 WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING
SAE J 527 : 2013 BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING
SAE J 525 : 2016 WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
SAE J 524 : 2016 SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
ISO 10763:1994 Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures
SAE J 2467 : 2015 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
SAE J 1176 : 2012 EXTERNAL LEAKAGE CLASSIFICATIONS FOR HYDRAULIC SYSTEMS
SAE TSB 003 : 1999 RULES FOR SAE USE OF SI (METRIC) UNITS
SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
ISO 2944:2000 Fluid power systems and components — Nominal pressures
SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
ISO 13486-1:1999 Road vehicles Hydraulic braking systems Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
SAE J512 : 1997 AUTOMOTIVE TUBE FITTINGS
SAE J 2613 : 2009 WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING

$178.01
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more