Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

UNE-EN 10025-1:2006

Current
Current

The latest, up-to-date edition.

Hot rolled products of structural steels - Part 1: General technical delivery conditions
Available format(s)

Hardcopy , PDF

Language(s)

Spanish, Castilian, English

Published date

08-02-2006

Foreword
1 Scope
2 Normative references
   2.1 General standards
   2.2 Standards on dimensions and tolerances
   2.3 Standards on testing
3 Terms and definitions
4 Classification and designation
   4.1 Classification
        4.1.1 Main quality classes
        4.1.2 Grades and qualities
   4.2 Designation
5 Information to be supplied by the purchaser
   5.1 Mandatory information
   5.2 Options
6 Manufacturing process
   6.1 Steel making process
   6.2 Deoxidation or grain size
   6.3 Delivery conditions
7 Requirements
   7.1 General
   7.2 Chemical composition
   7.3 Mechanical properties
        7.3.1 General
        7.3.2 Impact properties
        7.3.3 Improved deformation properties
               perpendicular to the surface
   7.4 Technological properties
        7.4.1 Weldability
        7.4.2 Formability
        7.4.3 Suitability for hot-dip zinc-coating
        7.4.4 Machinability
   7.5 Surface properties
   7.6 Internal soundness
   7.7 Dimensions, tolerances on dimensions and shape,
        mass
8 Inspection
   8.1 General
   8.2 Type of inspection and inspection document
   8.3 Frequency of testing
        8.3.1 Sampling
        8.3.2 Test units
        8.3.3 Verification of chemical composition
   8.4 Tests to be carried out for specific inspection
9 Preparation of samples and test pieces
   9.1 Selection and preparation of samples for chemical
        analysis
   9.2 Location and orientation of samples and test pieces
        for mechanical tests
        9.2.1 General
        9.2.2 Preparation of samples
        9.2.3 Preparation of test pieces
   9.3 Identification of samples and test pieces
10 Test methods
   10.1 Chemical analysis
   10.2 Mechanical tests
        10.2.1 Tensile tests
        10.2.2 Impact tests
   10.3 Ultrasonic testing
   10.4 Retests
11 Marking, labelling, packaging
12 Complaints
13 Options
14 Evaluation of conformity
Annex A (normative) Location of samples and test pieces
Annex B (normative) Evaluation of conformity
   B.1 General
   B.2 Initial type testing by the manufacturer
        B.2.1 General
        B.2.2 Intensive routine testing
        B.2.3 Supplementary testing
        B.2.4 Documentation
   B.3 Testing of samples taken at the factory by the
        manufacturer
   B.4 Factory production control (FPC)
        B.4.1 General
        B.4.2 Equipment
        B.4.3 Raw materials
        B.4.4 Product testing and evaluation
        B.4.5 Non-conforming products
Annex C (informative) List of national standards which
                       correspond with EURONORMS referenced
Annex ZA (informative) Clauses of this European Standard
                       addressing the provisions of the EU
                       Construction Products Directive
   ZA.1 Scope and relevant characteristics
   ZA.2 Procedure(s) for the attestation of conformity of hot
        rolled structural steel products
        ZA.2.1 Systems of attestation of conformity
        ZA.2.2 EC certificate and declaration of conformity
   ZA.3 CE marking and labelling
Bibliography

Describes requirements for flat and long products of hot rolled structural steels excluding structural hollow sections and tubes.

Committee
CTN 36
DevelopmentNote
Supersedes UNE EN 10025, UNE EN 10113-1, UNE EN 10113-2, UNE EN 10113-3, UNE EN 10137-1, UNE EN 10137-2 & UNE EN 10155. (09/2006)
DocumentType
Standard
Pages
38
PublisherName
Asociacion Espanola de Normalizacion
Status
Current
Supersedes

UNE 27252:2014 Civil shipbuilding and ship repairing. Standardised components. Flush oval manhole
UNE 27007:2013 Civil shipbuilding and ship repairing. Standardised components. Mooring elements: Welded steel bollard
UNE 27255:2012 Civil shipbuilding and ship repairing. Standardised components. Manholes: Hinged handle for manhole cover
UNE 27025:2013 Civil shipbuilding and ship repairing. Standardised components. Mooring elements: Pedestal fairlead
UNE 27585:2016 Civil shipbuilding and ship repairing. Standardised components. Watertight cover (up/down opening) for ventilation louver
UNE 27666:2014 Civil shipbuilding and ship repairing. Standardised components. Short angle bar pipe support with round bar pipe clamp
UNE 27261:2014 Civil shipbuilding and ship repairing. Standardised components. Circular manhole without coaming
UNE 27017:2013 Civil shipbuilding and ship repairing. Standardised components. Mooring elements: Cleats
UNE 27658:2014 Civil shipbuilding and ship repairing. Standardised components. Pipe supports: Long angle bar pipe support with flat bar pipe clamp
UNE 27762:2018 Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: Flanged penetration piece for PN10 and PN16, with ASTM tube
UNE 27008:2013 Civil shipbuilding and ship repairing. Standardised components. Mooring elements: Cruciform bollard
UNE 27670:2014 Civil shipbuilding and ship repairing. Standardised components. Flat bar pipe clamp for CUNI pipes
UNE 207018:2010 Plate metallic supports for overhead electrical lines.
UNE 27757:2018 Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: Flanged penetration piece for PN6
UNE 27584:2014 Civil shipbuilding and ship repairing. Standardised components. Ventilation cowls and louvers: Non removable ventilation louver (free area < 0,6 m2)
UNE 27663:2014 Civil shipbuilding and ship repairing. Standardised components. Pipe supports: One leg type "A" flat bar pipe support with flat bar pipe clamp.
UNE 207017:2010 Lattice steel towers for distribution overhead electrical lines.
UNE 27760:2018 Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: Flanged angle penetration piece
UNE 27551:2016 Civil shipbuilding and ship repairing. Standardised components. Ventilation cowls
UNE 27256:2012 Civil shipbuilding and ship repairing. Standardised components. Manholes: Lifting ring for manhole cover
UNE 27659:2014 Civil shipbuilding and ship repairing. Standardised components. Pipe supports: Shot angle bar pipe support with flat bar pipe clamp
UNE 27586:2016 Civil shipbuilding and ship repairing. Standardised components. Watertight cover (lateral opening) for ventilation louver
UNE 27550:2016 Civil shipbuilding and ship repairing. Standardised components. Flat flange for ventilation cowls
UNE 27671:2014 Civil shipbuilding and ship repairing. Standardised components. Angle bar pipe support with flat bar pipe clamp for CUNI pipes
UNE 27026:2013 Civil shipbuilding and ship repairing. Standardised components. Mooring elements: Shipside roller fairleads
UNE 27587:2014 Civil shipbuilding and ship repairing. Standardised components. Manhole for ventilation structural ducts
UNE 27657:2014 Civil shipbuilding and ship repairing. Standardised components. Pipe supports: U shaped flat bar pipe support with flat bar pipe clamp
UNE 27672:2014 Civil shipbuilding and ship repairing. Standardised components. T pipe support with flat bar pipe clamp for CUNI pipes
UNE 27250:2014 Civil shipbuilding and ship repairing. Standardised components. Oval manhole with coaming
UNE 27652:2014 Civil shipbuilding and ship repairing. Standardised components. Flat bar pipe clamp
UNE 27552:2016 Civil shipbuilding and ship repairing. Standardised components. Ventilation cowls and louvers: Watertight ventilation cowl
UNE 27009:2013 Civil shipbuilding and ship repairing. Standardised components. Mooring elements: Steel rollers
UNE 27270:2012 Civil shipbuilding and ship repairing. Standardised components. Ladders: Vertical ladder (mild steel)
UNE 27758:2018 Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: Flanged penetration piece for PN10 and PN16
UNE 27766:2018 Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: Flanged penetration piece with sleeve for PN10 and PN16
UNE 27254:2012 Civil shipbuilding and ship repairing. Standardised components. Manholes: Fixed handle for manhole cover
UNE 27764:2018 Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: flanged angle penetration piece with ASTM tube
UNE 27662:2014 Civil shipbuilding and ship repairing. Standardised components. Pipe supports: One leg type "O" flat bar pipe support with flat bar pipe clamp
UNE 27768:2018 Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: Flanged penetration piece with sleeve for PN10 and PN16, with ASTM tube
UNE 27667:2016 Civil shipbuilding and ship repairing. Standardised components. Long angle bar pipe support with round bar pipe clamp
UNE 27276:2012 Civil shipbuilding and ship repairing. Standardised components. Ladders: Steel folded rung for dog-step ladder
UNE 27665:2014 Civil shipbuilding and ship repairing. Standardised components. Angle bar foundation for pipes with round bar pipe clamp

View more information
$138.17
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more