I.S. EN 13445-4:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
Hardcopy , PDF
30-01-2020
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Requirements for manufacturing and subcontracting
4 Materials
5 Manufacturing tolerances
6 Weld details
7 Welding
8 Manufacture and testing of welds — Production test
9 Forming of pressure parts
10 Post weld heat treatment (PWHT)
11 Repairs
12 Finishing operations
Annex A (informative) Structural tolerances
Annex B (informative) Example of a sub-contractors form
Annex C (normative) Specification and approval of expansion procedures and operators
Annex Y (informative) History of EN 13445-4
Annex ZA (informative) Relationship between this European Standard and the essential requirements of Directive 2014/68/EU aimed to be covered
Bibliography
Defines requirements for the manufacture of unfired pressure vessels and their parts, made of steels, including their connections to non-pressure parts.
Committee |
TC 54
|
DevelopmentNote |
ISSUE 3 dated 19.08.2016 issued incorporating latest Correction Notice issued by CEN dated 03.08.2016. (09/2016)
|
DocumentType |
Standard
|
Pages |
76
|
ProductNote |
THIS STANDARD ALSO REFERS TO EN 10028-2:2009,EN 10028-3:2009,EN 10028-4:2009,EN 10222-4:1998+A1:2002,EN 13445-1:2014,EN ISO 5173:2010,EN ISO 9606-1:2013,EN ISO 14731:2007,EN 1011-2:2001,EN ISO 13916:1996, NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document.
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NBN EN 13445-4 : 2014 AMD 1 2016 | Identical |
BS EN 13445-4 : 2014 | Identical |
UNI EN 13445-4 : 2015 | Identical |
UNE-EN 13445-4:2015 | Identical |
DIN EN 13445-4:2015-12 | Identical |
SN EN 13445-4 : 2014 AMD 1 2016 | Identical |
NF EN 13445-4 : 2014 AC 2 2016 | Identical |
NS EN 13445-4 : 2014 AMD 1 2016 | Identical |
NEN EN 13445-4 : 2016 | Identical |
EN 13445-4:2014 | Identical |
EN 13445-4 : 2014 COR 2017 | Identical |
ONORM EN 13445-4 : 2017 | Identical |
DIN EN 13445-4:2002-08 | Identical |
I.S. 328:2015/AC1:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
I.S. 328:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
EN ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) |
EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
EN 1708-1:2010 | Welding - Basic welded joint details in steel - Part 1: Pressurized components |
EN 10222-2:1999 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties |
EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
EN 13445-5:2014 | Unfired pressure vessels - Part 5: Inspection and testing |
EN ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) |
ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
CR ISO 17663 : 2001 | WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
EN 10222-3:1998 | Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
EN 10217-4:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
ISO/TR 17663:2001 | Welding Guidelines for quality requirements for heat treatment in connection with welding and allied processes |
EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
EN ISO 9016:2012 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012) |
EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
EN ISO 5178:2011 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2001) |
ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
EN ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003) |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN ISO 17639:2013 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003) |
ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
EN ISO 13585:2012 | Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) |
ISO 13585:2012 | Brazing Qualification test of brazers and brazing operators |
ISO 857-1:1998 | Welding and allied processes Vocabulary Part 1: Metal welding processes |
EN 10217-2:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
ISO 17639:2003 | Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN 10217-3:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
EN 13134:2000 | Brazing - Procedure approval |
EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
ISO 9016:2012 | Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination |
ISO 5178:2001 | Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints |
EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
EN 10216-4:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
ISO 13916:2017 | Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
EN 764-3:2002 | Pressure equipment - Part 3: Definition of parties involved |
ISO 9015-1:2001 | Destructive tests on welds in metallic materials Hardness testing Part 1: Hardness test on arc welded joints |
ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
EN 10217-1:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
EN 10217-5:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN 10217-6:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.