IEC 60534-2-3:2015
Current
The latest, up-to-date edition.
Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, English - French
16-12-2015
IEC 60534-2-3:2015 is applicable to industrial-process control valves and provides the flow capacity test procedures for determining the following variables used in the equations given in IEC 60534-2-1:
a) flow coefficient C;
b) liquid pressure recovery factor without attached fittings FL;
c) combined liquid pressure recovery factor and piping geometry factor of a control valve with attached fittings FLP;
d) piping geometry factor FP;
e) pressure differential ratio factors xT and xTP;
f) valve style modifier Fd;
g) Reynolds number factor FR.
This third edition cancels and replaces the second edition published in 1997, of which it constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Addition of informative Annexes B, C, D, E and F.
b) Organizational and formatting changes were made to group technically related subject matter.
Committee |
TC 65/SC 65B
|
DevelopmentNote |
Stability date: 2021. (12/2015)
|
DocumentType |
Standard
|
ISBN |
978-2-8322-8666-1
|
Pages |
42
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NF EN 60534-2-3:2016 | Identical |
IS/IEC 60534 : Part 2 : Sec 3:2015 | Identical |
NBN EN 60534 2-3 : 2016 | Identical |
NEN EN IEC 60534-2-3 : 2016 | Identical |
SN EN 60534-2-3 : 2016 | Identical |
UNE-EN 60534-2-3:2016 | Identical |
BS EN 60534-2-3:2016 | Identical |
CEI EN 60534-2-3 : 2016 | Identical |
EN 60534-2-3:2016 | Identical |
DIN EN 60534-2-3:2017-01 | Identical |
UNE-EN 60534-2-3:1999 | Identical |
PN EN 60534-2-3 : 2016 | Identical |
BIS IS/IEC 60534-2-3 : 1997 | Identical |
CEI EN 60534-8-4 : 2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
I.S. EN 60534-2-4:2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
NF EN 60534 8-2 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES |
BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
BS EN 60534-2-1:2011 | Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures Power metering and monitoring devices (PMD) |
BS EN 60534-3-2:2001 | Industrial-process control valves. Dimensions Face-to-face dimensions for rotary control valves except butterfly valves |
BS EN 60534-8-4:2015 | Industrial-process control valves Noise considerations. Prediction of noise generated by hydrodynamic flow |
09/30202711 DC : 0 | BS EN 1267 - INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
ISO 10631:2013 | Metallic butterfly valves for general purposes |
16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
I.S. EN 60534-8-2:2011 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES (IEC 60534-8-2:2011 (EQV)) |
DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
DIN EN ISO 23553-1:2014-09 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
BS EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
EN 60534-2-5:2003 | Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
EN 1349:2009 | Industrial process control valves |
BS EN 1349:2009 | Industrial process control valves |
BS EN 60534-2-4:2009 | Industrial-process control valves Flow capacity. Inherent flow characteristics and rangeability |
16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
BS ISO 10631:2013 | Metallic butterfly valves for general purposes |
04/30117386 DC : DRAFT JUL 2004 | EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
CEI EN 60534-2-5 : 2004 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY |
CEI EN 60534-8-2 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES |
I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
IEC 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
IEC 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
BS EN 60534-8-2:2011 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves |
I.S. EN 60534-2-1:2011 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS |
BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
UNE-EN 593:2009 | Industrial valves - Metallic butterfly valves |
I.S. EN 1267:2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
VDI/VDE 2178:2009-07 | Fluidic characteristic quantities of quarter turn valves and their determination |
I.S. EN 88-2:2007 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR |
VDI/VDE 2176:2007-09 | Fluidic characteristic quantities of vanes and their determination |
DIN EN 60534-2-4:2009-11 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
BS EN 60534-8-1:2005 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves |
I.S. EN 60534-8-1:2005 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
NF EN 60534 8-1 : 2006 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
CEI EN 60534-2-4 : 2010 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
UNI EN 334 : 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
CEI EN 60534-8-1 : 2006 | VANNES DE REGULATION DES PROCESSUS INDUSTRIELS - PARTIE 8-1: CONSIDERATIONS SUR LE BRUIT - MESURE EN LABORATOIRE DU BRUIT CREE PAR UN DEBIT AERODYNAMIQUE A TRAVERS UNE VANNE DE REGULATION |
UNE-EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
UNE-EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
IEC 60534-2-4:2009 | Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability |
UNI EN 1267 : 2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
UNI EN ISO 23553-1 : 2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
DIN IEC 60534-2-4:1990-11 | INDUSTRIAL-PROCESS CONTROL VALVES; FLOW CAPACITY; INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
12/30236280 DC : 0 | BS ISO 10631 - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
BS EN 60534-2-5:2003 | Industrial-process control valves. Flow capacity Sizing equations for fluid flow through multistage control valves with interstage recovery |
PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
NF EN 60534-2-4 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
I.S. EN ISO 23553-1:2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
DIN EN 1267:2012-04 | Industrial valves - Test of flow resistance using water as test fluid |
IEC 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
IEC 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
DIN EN 88-2:2008-03 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
BS EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
12/30250105 DC : 0 | BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
IEC 60534-2-5:2003 | Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
DIN EN 60534-2-1:2012-01 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011) |
03/321016 DC : DRAFT DEC 2003 | IEC 60534-8-1 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
I.S. EN 60534-8-4:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
PREN 88-2 : DRAFT 2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 50 KPA UP TO AND INCLUDING 500 KPA AND ASSOCIATED SAFETY DEVICES |
I.S. EN 60534-2-5:2003 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY |
EN 60534-2-1:2011/AC:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011) |
IEC 60534-2-1:2011 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
BS EN 1267:2012 | Industrial valves. Test of flow resistance using water as test fluid |
EN 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
EN 60534-2-4 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
EN 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
EN 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
EN 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
IEC 61298-1:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations |
IEC 61298-2:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions |
IEC 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
IEC 60534-2-1:2011 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
IEC 60534-1:2005 | Industrial-process control valves - Part 1: Control valve terminology and general considerations |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.