09/30197751 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 4678 - AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS
Hardcopy , PDF
English
31-08-2011
1 Scope
2 Normative references
3 Terms and definitions
4 Terminology
4.1 Laser beam welding
4.2 Weldability
4.3 Technical terms
4.4 Termes giniraux
5 Symbols and abbreviations
6 General requirements
6.1 Weld classification
6.2 Welding machines
6.3 Operators welders and setters
6.4 Responsibilities
7 Technical requirements for manufacturing
new parts
7.1 Materials
7.2 Preparation and qualification of
welding procedures
7.3 Process monitoring and inspection in manufacture
7.4 Acceptance of welded assemblies
8 Technical repair requirements
9 Special case
Annex A (normative)
A.1 Imperfections
Annex B (informative)- Qualification of laser welding
procedure CO[2] - Welding procedure
specification (WPS): gas process 522
Annexe C (informative) - Qualification of welding procedure
by YAG laser beam - Welding
procedure specification (WPS): solid
process
BS EN 4678
| Committee |
ACE/61/-/2
|
| DocumentType |
Draft
|
| Pages |
44
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 4678 : 200P1 | Identical |
| EN ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003) |
| EN 4632-006:2013 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys |
| EN ISO 22827-1:2005 | Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005) |
| EN ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003) |
| EN 1043-2:1996 | Destructive tests on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| EN 4632-001:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements |
| ISO 24394:2008 | Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN 895:1995 | Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| PREN 4632-002 : 200P1 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| EN ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003) |
| EN 4632-003:2010 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| ISO/TR 25901:2007 | Welding and related processes — Vocabulary |
| PREN 4632-004 : 200P1 | WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 004: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS |
| EN 875:1995 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
| ISO 857-1:1998 | Welding and allied processes — Vocabulary — Part 1: Metal welding processes |
| ISO 17639:2003 | Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds |
| EN ISO 11145:2016 | Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016) |
| EN ISO 22827-2:2005 | Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005) |
| ISO 22826:2005 | Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| ISO 6947:2011 | Welding and allied processes — Welding positions |
| EN 4632-005:2009 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.