• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ANSI Z87.1 : 2015

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

OCCUPATIONAL AND EDUCATIONAL PERSONAL EYE AND FACE PROTECTION DEVICES

Available format(s)

Hardcopy , PDF

Superseded date

18-04-2020

Language(s)

English

Published date

01-01-2015

Foreword
1 Preface
2 Scope, Purpose, Application, and Interpretations
3 Definitions
4 Normative References
5 General Requirements
6 Impact Protector Requirements
7 Optical Radiation Protector Requirements
8 Droplet and Splash, Dust, and Fine Dust Protector
   Requirements
9 Test Methods
10 Instructions, Use and Maintenance
Annexes
Annex A - Samples for Testing (normative)
Annex B - Reference Headforms (normative)
Annex C - Spectral Factor Tables (normative)
Annex D - Lateral (Side) Coverage Illustration
          (Medium Headform) (informative)
Annex E - Test Apparatus (informative)
Annex F - Calibration of Test Telescope (informative)
Annex G - Illustrations to Aid in Refractive Power,
          Astigmatism and Resolving Power Testing
          (informative)
Annex H - Sources for Test Apparatus (informative)
Annex I - Resource Publications (informative)
Annex J - Eye and Face Selection Guide (informative)
Annex K - Hazard Assessment and Protector Selection
          (informative)
Annex L - Examples of Protector Markings (informative)

Provides criteria related to the general requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries from such hazards as impact, non-ionizing radiation and liquid splash exposures in occupational and educational environments including, but not limited to, machinery operations, material welding and cutting, chemical handling, and assembly operations.

DevelopmentNote
Supersedes A A 1110 (B) and A A 1813 (A) (05/2000) Supersedes A A 1995 (04/2003) Supersedes A A 1994 and A A 1996. (05/2003) Supersedes GG G 531 Supersedes GGG H 211. Supersedes L F 36. (05/2004)
DocumentType
Standard
Pages
64
PublisherName
Safety Equipment Association
Status
Superseded
SupersededBy
Supersedes

AWS A5.4 : 92(R2000) STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING, SPECIFICATION FOR
NFPA 1999 : 2018 PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS
AIHA Z9.1 : 2006 VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS
AWS D3.6M : 2010 UNDERWATER WELDING CODE
AWS BRH:2007 BRAZING HANDBOOK
AWS C7.1M/C7.1 : 2013 RECOMMENDED PRACTICES FOR ELECTRON BEAM WELDING AND ALLIED PROCESSES
ASTM C 945 : 2005 : R2012 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
AIHA Z9.6 : 2008 EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING
ASTM F 803 : 2014 : REDLINE Standard Specification for Eye Protectors for Selected Sports
ASTM F 2940 : 2013 Standard Practice for Air Soft Field Operation
AWS WHC2.08 : 0 WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 8: ELECTROGAS WELDING
AWS WHC2.12 : 0 WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 12: BRAZING
AWS D14.1/D14.1M:2005 SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT
AWS D1.4/D1.4M : 2011 STRUCTURAL WELDING CODE - REINFORCING STEEL
AWS WHB.3.9 : 2007 WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3
AWS A5.22 : 1995 SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR FLUX CORED ARC WELDING AND STAINLESS STEEL FLUX CORED RODS FOR GAS TUNGSTEN ARC WELDING
AWS C1.1M/C1.1 : 2012 RECOMMENDED PRACTICES FOR RESISTANCE WELDING
ISO 28902-1:2012 Air quality — Environmental meteorology — Part 1: Ground-based remote sensing of visual range by lidar
UNI EN ISO 9241-303 : 2012 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 303: REQUIREMENTS FOR ELECTRONIC VISUAL DISPLAYS
ANSI/ASSE A10.6 : 2006 SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS
ASTM E 848 : 1994 : R2000 Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
ASTM E 848 : 1994 : R2016 Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
NFPA 1977 : 2016 PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING
ASME B107.410 : 2008 STRUCK TOOLS
ASME B107.400 : 2008 Striking Tools (B107.400 - 2008)
API 76 REDLINE : 2007 CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS
ANSI O2.1 : 1983 SAWMILLS - SAFETY REQUIREMENTS FOR
AIHA Z9.3 : 2007 SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION
NFPA 197 : 2018 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
ASTM F 2039 : 2000 Standard Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program
GGG-H-211 Revision D:1985 HELMETS, WELDERS'; HANDSHIELD, WELDING; AND PLATES, WELDING
API 54 RUSSIAN : 19991 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS
AAMI TIR67 : 2018 PROMOTING SAFE PRACTICES PERTAINING TO THE USE OF STERILANT AND DISINFECTANT CHEMICALS IN HEALTH CARE FACILITIES
BS ISO 18930:2011 Imaging materials. Pictorial colour reflection prints. Methods for evaluating image stability under outdoor conditions
MIL-STD-1220 Revision B:1991 MISCELLANEOUS ALCOHOLS AND AMINES, TECHNICAL GRADE
AIHA Z9.4 : 2011 ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES
AWS D14.3/D14.3M : 2010 SPECIFICATION FOR WELDING EARTHMOVING, CONSTRUCTION, AND AGRICULTURAL EQUIPMENT
MIL-DTL-43511 Revision D:2006 VISORS, FLYER'S HELMET, POLYCARBONATE
A-A-1770 Revision A:1993 FACESHIELD, INDUSTRIAL
A-A-55202 Revision A:1996 Helmet, Fireman\'s (No S/S Document)
MIL-STD-1202 Revision A:1988 FACESHIELD, INDUSTRIAL
A-A-1110 Revision B:1997 GOGGLES, INDUSTRIAL, PLASTIC
ANSI/ASSP A10.9-2013(R2018) SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS
ANSI Z49.1 : 2012 SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES
NFPA 1851 : 2014 SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR STRUCTURAL FIRE FIGHTING AND PROXIMITY FIRE FIGHTING
API 76 : 2007 : R2013 CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS
API 74 : 2001 : R2007 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
ANSI/ASSE A10.16 : 2009 SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS
API RP 76 : 2007 CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS
ANSI/ASSE Z117.1 : 2009 SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES
NFPA 1972 : 1992 HELMETS FOR STRUCTURAL FIRE FIGHTING
ANSI B165.1 : 2013 POWER TOOLS - POWER-DRIVEN BRUSHING TOOLS - SAFETY REQUIREMENTS FOR DESIGN, CARE, AND USE
SAE ARP 6161 : 2011 FLIGHT COMPARTMENT GLARE
NFPA 1992 : 2018 LIQUID SPLASH-PROTECTIVE ENSEMBLES AND CLOTHING FOR HAZARDOUS MATERIALS EMERGENCIES
ASTM F 1703 : 2013 : REDLINE Standard Guide for Skating and Ice Hockey Playing Facilities
ASTM F 3077 : 2017 : REDLINE Standard Specification for Eye Protectors for Women’s Lacrosse
ANSI/ASSP Z9.10 : 2017 FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES
UFC 3-420-01 : Change 10 UNIFIED FACILITIES CRITERIA - PLUMBING SYSTEMS
ANSI/ASSE A10.15 : 1995 : R2005 SAFETY REQUIREMENTS FOR DREDGING
ANSI/ASSE A10.15 : 1995 : R2011 SAFETY REQUIREMENTS FOR DREDGING
NFPA 1855 : 2018 SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS
AWS D14.4/D14.4M : 2012 SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT
DIN ISO 28902-1 E : 2012 AIR QUALITY - ENVIRONMENTAL METEOROLOGY - PART 1: GROUND-BASED REMOTE SENSING OF VISUAL RANGE BY LIDAR (ISO 28902-1:2012)
AWS WHC2.10 : 0 WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 10: ELECTROSLAG WELDING
MIL-H-1987 Revision G:1980 HELMET, FIRE FIGHTERS
API RP 74 : 2001 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
ASTM E 848 : 1994 : R2006 Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
09/30165797 DC : 0 BS EN 60601-2-57 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
ASTM E 2770 : 2017 : REDLINE Standard Guide for Operational Guidelines for Initial Response to Suspected Biological Agents and Toxins
DIN ISO 28902-1:2012-06 Air quality - Environmental meteorology - Part 1: Ground-based remote sensing of visual range by lidar (ISO 28902-1:2012)
AIHA Z9.1 : 2006 VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS
ASTM C 945 : 2005 : R2017 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
ASTM C 945 : 2005 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
10/30215313 DC : 0 BS ISO 18930 - IMAGING MATERIALS - PICTORIAL COLOUR REFLECTION PRINTS - METHODS FOR EVALUATING IMAGE STABILITY UNDER OUTDOOR CONDITIONS
MIL-B-44315 Base Document:1987 Body Armor, Chest Plate and Face Shield, Explosive Ordnance Disposal (No S/S Document)
A-A-1994 Revision A:1998 HELMET AND HANDHELD SHIELD, WELDERS
MIL-STD-1208 Revision B:1991 INORGANIC SODIUM SALTS AND COMPOUNDS, TECHNICAL GRADE
ANSI Z245.41 : 2015 FACILITIES FOR THE PROCESSING OF COMMINGLED RECYCLABLE MATERIALS - SAFETY REQUIREMENTS
NFPA 57 : 2002 LIQUEFIED NATURAL GAS (LNG) VEHICULAR FUEL SYSTEMS CODE
ASTM F 2039 : 2000 : R2006 Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
NFPA 1991 : 2016 Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies
AWS C5.7 : 2000 RECOMMENDED PRACTICES FOR ELECTROGAS WELDING
AEP-4495 : 2016 GUIDANCE FOR THE PROCUREMENT OF LASER EYE PROTECTION (LEP) FOR THE INDIVIDUAL MILITARY USER
AWS WHC2.03 : 0 WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 3: GAS TUNGSTEN ARC WELDING
ANSI Z117.1 REDLINE : 2009 COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009)
AIHA Z9.6 : 2008 EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING
ANSI/ASSE A10.47 : 2015 WORK ZONE SAFETY FOR HIGHWAY CONSTRUCTION
ANSI A10.16 REDLINE : 2009 COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009)
ASTM E 2458 : 2017 : REDLINE Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
NASA STD 8719.12 : 2010 SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS
AIHA Z9.10 : 2010 FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES
OPEI B175.4 : 2013 OUTDOOR POWER EQUIPMENT - PORTABLE, HANDHELD, INTERNAL COMBUSTION ENGINE-POWERED CUT-OFF MACHINES - SAFETY AND ENVIRONMENTAL REQUIREMENTS
ANSI B165.2 : 1987 POWER TOOLS - POWER DRIVEN BRUSHING TOOLS CONSTRUCTED WITH WOOD, PLASTIC, OR COMPOSITION HUBS AND CORES - SAFETY REQUIREMENTS FOR THE DESIGN, CARE, AND USE,
ANSI L1.1 : 1981 SAFETY AND HEALTH REQUIREMENTS FOR THE TEXTILE INDUSTRY,
ASTM F 2941 : 2013 Standard Practice for Air Soft Player Safety Briefing
AWS F2.3M : 2011 SPECIFICATION FOR USE AND PERFORMANCE OF TRANSPARENT WELDING CURTAINS AND SCREENS
ASTM F 2812 : 2012 Standard Specification for Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports
PD ISO/TS 16976-8:2013 Respiratory protective devices. Human factors Ergonomic factors
ANSI B11.7 : 1995 COLD HEADERS AND COLD FORMERS - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE
API RP 1646 : 2017 SAFE WORKING PRACTICES FOR CONTRACTORS WORKING AT RETAIL PETROLEUM/CONVENIENCE FACILITIES
NFPA 1500 : 2018 FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM
ANSI B11.9:2010 SAFETY REQUIREMENTS FOR GRINDING MACHINES
SAE J 2967 : 2013 READY MIXED CONCRETE TRUCK RECOMMENDED PRACTICE
ANSI B24.1 : 1985 FORGING MACHINERY, SAFETY REQUIREMENTS FOR,
ANSI B11.9 : 2010(R2015) SAFETY REQUIREMENTS FOR GRINDING MACHINES
ANSI SNT 101 : 2015 SAFETY REQUIREMENTS FOR PORTABLE COMPRESSED - AIR - ACTUATED FASTENER DRIVING TOOLS
DIN EN ISO 9241-303:2012-03 Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays (ISO 9241-303:2011)
ASTM F 1776 : 2016-11 SPECIFICATION FOR EYE PROTECTIVE DEVICES FOR PAINTBALL SPORTS
AWS C7.3 : 2016 PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING
API 74 : 2001 : R2013 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
ASTM E 2501 : 2011 : R2017 Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
NFPA 1994 : 2018 PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS
API 54 :1999 RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS
ANSI/ASSP A10.9:2013 SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS
AWS D1.6 : 1999 ERRATA 1999 STRUCTURAL WELDING CODE - STAINLESS STEEL
ISO 18930:2011 Imaging materials Pictorial colour reflection prints Methods for evaluating image stability under outdoor conditions
ANSI A10.16 REDLINE : 2009 COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009)
ANSI A10.24 : 2014 ROOFING - SAFETY REQUIREMENTS FOR LOW-SLOPED ROOFS
API 54 : 1999 : R2013 RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS
AIHA Z9.3 : 2007 SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION
ANSI/ASSP Z9.1 : 2016 VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS
ANSI/ASSE A10.6 : 2006 SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS
ANSI/ASSE Z117.1 : 2009 SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES
ANSI A10.3 : 2013 SAFETY REQUIREMENTS FOR POWDER-ACTUATED FASTENING SYSTEMS
ANSI Z80.5 : 2010 OPHTHALMICS - REQUIREMENTS FOR OPHTHALMIC FRAMES
I.S. EN ISO 9241-303:2011 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 303: REQUIREMENTS FOR ELECTRONIC VISUAL DISPLAYS (ISO 9241-303:2011)
NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
ISO 9241-303:2011 Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays
EN ISO 9241-303:2011 Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays (ISO 9241-303:2011)
FAA 3900.69 : 2016 FLIGHT STANDARDS SERVICE AIRCRAFT ACCIDENT INVESTIGATION SAFETY PROGRAM
10/30197237 DC : 0 BS ISO 28902 - AIR QUALITY - ENVIRONMENTAL METEOROLOGY - GROUND-BASED REMOTE SENSING OF VISUAL RANGE
GG-G-531 Revision C:1978 GOGGLES, INDUSTRIAL AND SPECTACLES, INDUSTRIAL, PLASTIC
AWS TSS : 1985 THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION
AIHA Z9.4 : 2011 ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES
ASTM F 2941 : 2013 : R2017 Standard Practice for Air Soft Player Safety Briefing
API 54 RUSSIAN : 1999 : R2007 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS
MIL-STD-606 Revision A:1988 HELMET WELDERS; SHIELD, WELDING, HAND HELD, AND LENSES, HELMET
CSA Z94.3 : 2015 EYE AND FACE PROTECTORS
AWS C7.2 : 1998 RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING AND DRILLING
MIL-STD-1217 Revision C:1991 ORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE
BS EN ISO 9241-303:2011 Ergonomics of human-system interaction Requirements for electronic visual displays
ANSI B152.2 : 1982 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR THE CONSTRUCTION, CARE AND USE OF PERMANENT-MOLD CASTING MACHINES (OTHER THAN GRAY IRON)
ANSI Z80.31 : 2017 OPHTHALMIC OPTICS - SPECIFICATIONS FOR READY-TO-WEAR NEAR-VISION SPECTACLES
ANSI Z117.1 REDLINE : 2009 COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009)
MIL-STD-1434 Revision A:1988 GOGGLES, (METRIC)
MIL PRF 44366 : D SPECTACLES, PROTECTIVE, LASER, BALLISTIC (BLPS)
DOD-G-51510 Base Document:1985 GOGGLES, INDUSTRIAL, EYECUP AND LENSES, GOGGLES, INDUSTRIAL (METRIC)
ASTM E 2501 :2011 Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
ANSI B169.1 : 1990 SAFETY REQUIREMENTS FOR THE CONSTRUCTION, CARE, AND USE OF MACHINERY USED IN ENVELOPE MANUFACTURING
AWS C5.3 : 2000 RECOMMENDED PRACTICES FOR AIR CARBON ARC GOUGING AND CUTTING
NFPA 1951 : 2013 PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS
ASTM F 2039 : 2000 : R2012 Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
ANSI Z80.1 : 2015 OPHTHALMICS - PRESCRIPTION OPHTHALMIC LENSES - RECOMMENDATIONS
AWS D10.11M/D10.11:2007 GUIDE FOR ROOT PASS WELDING OF PIPE WITHOUT BACKING
AWS D10.6/D10.6M : 2000 RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING OF TITANIUM PIPING AND TUBING
AWS C5.4 : 1993 RECOMMENDED PRACTICES FOR STUD WELDING
AWS WHC2.02 : 0 WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 2: SHIELDED METAL ARC WELDING
AWS A5.9 : 93(R1999) BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR
AWS EG4.0 : 1996 GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 3, EXPERT WELDER
AWS A5.10 : 1992 BARE ALUMINUM AND ALUMINUM ALLOY WELDING ELECTRODES AND RODS, SPECIFICATION FOR
ASTM F 2039 : 2000 : R2018 Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
ANSI/ASSE A10.16 : 2009 SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS
ASTM F 2940 : 2013 : R2017 Standard Practice for Air Soft Field Operation
ASTM E 848 : 1994 : R2012 Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
ASME PASE : 2014 SAFETY STANDARD FOR PORTABLE AUTOMOTIVE SERVICE EQUIPMENT

ANSI Z80.1 : 2015 OPHTHALMICS - PRESCRIPTION OPHTHALMIC LENSES - RECOMMENDATIONS
EN 168:2001 Personal eye-protection - Non-optical test methods
ANSI Z80.3 : 2015 OPHTHALMICS - NONPRESCRIPTION SUNGLASS AND FASHION EYEWEAR REQUIREMENTS
ASTM D 1003 : 2013 : REDLINE Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ANSI Z80.5 : 2010 OPHTHALMICS - REQUIREMENTS FOR OPHTHALMIC FRAMES

View more information
£51.23
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.