• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASME B31.1 : 2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

POWER PIPING
Available format(s)

Hardcopy , PDF

Superseded date

21-08-2021

Language(s)

English

Published date

30-06-2016

Foreword
Committee Roster
Introduction
Summary of Changes
Chapter I - Scope and Definitions
Chapter II - Design
Chapter III - Materials
Chapter IV - Dimensional Requirements
Chapter V - Fabrication, Assembly, and Erection
Chapter VI - Inspection, Examination, and Testing
Chapter VII - Operation and Maintenance
Mandatory Appendices
A - Allowable Stress Tables
B - Thermal Expansion Data
C - Moduli of Elasticity
D - Flexibility and Stress Intensification Factors
F - Referenced Standards
G - Nomenclature
H - Preparation of Technical Inquiries
J - Quality Control Requirements for Boiler External
    Piping (BEP)
N - Rules for Nonmetallic Piping and Piping Lined With
    Nonmetals
Nonmandatory Appendices
II - Rules for the Design of Safety Valve Installations
IV - Corrosion Control for ASME B31.1 Power Piping Systems
V - Recommended Practice for Operation, Maintenance, and
    Modification of Power Piping Systems
VI - Approval of New Materials
VII - Procedures for the Design of Restrained Underground Piping
VIII - Guidelines for Determining If Low-Temperature Service
       Requirements Apply
Index

Describes requirements for the design, materials, fabrication, erection, test, inspection, operation, and maintenance of piping systems.

DocumentType
Standard
ISBN
9780791870723
Pages
366
PublisherName
American Society of Mechanical Engineers
Status
Superseded
SupersededBy
Supersedes

ASCE 7 10 : 2011 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
API 16D:2004 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
UFC 3-540-08 : 2017 UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS
ANSI Z49.1 : 2012 SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES
ASME A17.1 : 2016 SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES
UFC 3-430-02FA : Change 1 UNIFIED FACILITIES CRITERIA - CENTRAL STEAM BOILER PLANTS
MIL E 17813 : F EXPANSION JOINTS, PIPE, METALLIC BELLOWS
AWWA M45 : 3 FIBERGLASS PIPE DESIGN
API 538 : 2015 INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
NFPA 32 : 2016 DRYCLEANING FACILITIES
AWS D10.10/D10.10M : 1999 : R2009 RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING
API 573 : 2013 INSPECTION OF FIRED BOILERS AND HEATERS
ANSI/CSA AMERICA FC 3-2004 (R2017) PORTABLE FUEL CELL POWER SYSTEMS
A-A-50559 Base Document:1996 VALVES, TEMPERATURE-REGULATING (THERMOSTATICALLY CONTROLLED)
ANS 57.7 : 88(R1997) DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (WATER POOL TYPE)
NFPA 86D : 1999 INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE
API 579-1 : 2016 FITNESS-FOR-SERVICE
IEEE C37.122.1-2014 REDLINE IEEE Guide for Gas-Insulated Substations Rated Above 52 kV
NFPA 850 : 2015 FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS
UFC 3-310-04 : Change 1 UNIFIED FACILITIES CRITERIA - SEISMIC DESIGN FOR BUILDINGS
UNI EN 13941 : 2011 DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
EEMUA 223 : 2010 PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER
ASME AG-1 : 2019 CODE ON NUCLEAR AIR AND GAS TREATMENT
AWS EG4.0 : 1996 GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 3, EXPERT WELDER
DEFSTAN 02-348/2(2008) : 2008 GUIDE TO THE DESIGN, CORROSION ASSESSMENT AND STRESS ANALYSIS OF STEAM SYSTEMS PIPEWORK
API 16D CHINESE : 2004 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
API 577 : 2013 WELDING PROCESSES, INSPECTION, AND METALLURGY
MIL V 18500 : B VALVE, REDUCING, COMPRESSED GAS
ANS 57.2 : 1983 LIGHT WATER REACTOR SPENT FUEL STORAGE FACILITIES, REQUIREMENTS FOR,
API 16AR : 2017 STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT
MSS SP 99 : 2016 INSTRUMENT VALVES
API 2001 : 2012 FIRE PROTECTION IN REFINERIES
AWS D10.10/D10.10M : 1999 RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING
CSA B355 : 2015 LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES
CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006)
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
NFPA 8504 : 1996 ATMOSPHERIC FLUIDIZED-BED BOILER OPERATION
MIL-M-18294 Revision D:1987 METER, FLUID QUANTITY VOLUMETRIC
UFC 4-826-10 : 2002 UNIFIED FACILITIES CRITERIA - DESIGN: REFRIGERATION SYSTEMS FOR COLD STORAGE
MIL-DTL-17557 Revision F:2013 Coolers, Fluid, Industrial, Naval Shipboard (Sample Water Coolers)
AWS B5.15 : 2010 SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS
ASME B16.22 : 2013 WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS
ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION
MIL-DTL-18436 Revision G:2017 Valves, Check - Bronze -and Steel-Body
AWS B5.4 : 2005 SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES
MSS SP 97 : 2012 INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS
API 551 : 2016 PROCESS MEASUREMENT
NFPA 664 : 2017 PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES
ACI 350 : 2006 CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY
MSS SP 104 : 2012 WROUGHT COPPER SOLDER-JOINT PRESSURE FITTINGS
ACI 350M : 2006 METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY
MSS SP 69 : 2003 PIPE HANGERS AND SUPPORTS - SELECTION AND APPLICATION
ASME AG 1 : 2012 CODE ON NUCLEAR AIR AND GAS TREATMENT
NFPA 17 : 2017 DRY CHEMICAL EXTINGUISHING SYSTEMS
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
MSS SP 130 : 2013 BELLOWS SEALS FOR INSTRUMENT VALVES
API 16D RUSSIAN : 2004 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
MSS SP 105 : 2016 INSTRUMENT VALVES FOR CODE APPLICATIONS
MSS SP 123 : 2013 NON-FERROUS THREADED AND SOLDER-JOINT UNIONS FOR USE WITH COPPER WATER TUBE
ASME PTB 2 : 2009 GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY
MIL-STD-777 Revision F:2012 SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS
EN 13941:2009+A1:2010 Design and installation of preinsulated bonded pipe systems for district heating
MSS SP 109 : 2012 WELD-FABRICATED COPPER SOLDER-JOINT PRESSURE FITTINGS
NFPA 11 : 2016 LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM
API 520-2 : 2015 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION
ASME FFS 1 : 2007 FITNESS-FOR-SERVICE
MSS SP 95 : 2014 SWAGE(D) NIPPLES AND BULL PLUGS
EEMUA 184 : 2009 GUIDE TO THE ISOLATION OF PRESSURE RELIEVING DEVICES
MIL-H-82000 Revision C:1990 HEATER, HOT OIL, 1.5, 3 AND 5 MILLION BTU/H OUTPUT, SKID MOUNTED
NFPA 67 : 2016 GUIDE ON EXPLOSION PROTECTION FOR GASEOUS MIXTURES IN PIPE SYSTEMS
API 2RD : 2013 DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
ANS 40.35 : 1991 VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE
CSA FC 3 : 2004 PORTABLE FUEL CELL POWER SYSTEMS
BS ISO 18647:2017 Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
AWS D10.7M/D10.7 : 2008 GUIDE FOR THE GAS SHIELDED ARC WELDING OF ALUMINUM AND ALUMINUM ALLOY PIPE
API 16D : 2004 : R2013 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
CSA Z180.1 : 2013 COMPRESSED BREATHING AIR AND SYSTEMS
ANSI B11.17 : 2004 : R2009 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
AWS TSS : 1985 THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION
EN ISO 10440-2:2001 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
NFPA 12 : 2018 CARBON DIOXIDE EXTINGUISHING SYSTEMS
NFPA 2010 : 2015 FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS
NFPA 805 : 2015 PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS
NFPA 12A : 2018 HALON 1301 FIRE EXTINGUISHING SYSTEMS
DEFSTAN 02-772/1(2007) : 2007 WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS
API 12F : 2008 SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
MIL-E-17814 Revision F:1992 EXPANSION JOINTS, PIPE, SLIP-TYPE PACKED
API 577 CHINESE : 2013 WELDING PROCESSES, INSPECTION AND METALLURGY
API 12F CHINESE : 2008 SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
NFPA 804 : 2015 FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS
NFPA 45 : 2015 FIRE PROTECTION FOR LABORATORIES USING CHEMICALS
NFPA 8506 : 1998 HEAT RECOVERY STEAM GENERATOR SYSTEMS
API 520-1 : 2014 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION
API 620 CHINESE : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
NFPA 804 : 2020 FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS
NFPA 8502 : 1999 PREVENTION OF FURNACE EXPLOSIONS/IMPLOSIONS IN MULTIPLE BURNER BOILERS
NFPA 803 : 1998 FIRE PROTECTION FOR LIGHT WATER NUCLEAR POWER PLANTS
NFPA 86C : 1999 INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE
UFC 3-430-01FA : 2003 UNIFIED FACILITIES CRITERIA - HEATING AND COOLING DISTRIBUTION SYSTEMS
NFPA 750 : 2015 WATER MIST FIRE PROTECTION SYSTEMS
ANSI B11.17 : 2004 : R2015 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
MSS SP 58 : 2009 PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION
MIL-DTL-17813 Revision H:2009 Expansion Joints, Pipe, Metallic Bellows, General Specification for
ANS 58.2 : 1988 DESIGN BASIS FOR PROTECTION OF LIGHT WATER NUCLEAR POWER PLANTS AGAINST THE EFFECTS OF POSTULATED PIPE RUPTURE
ASTM F 2014 : 2000 : R2019 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ASTM F 1172 : 1988 : R2010 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
CSA N293 : 2012 FIRE PROTECTION FOR NUCLEAR POWER PLANTS
ISO 3977-3:2004 Gas turbines — Procurement — Part 3: Design requirements
ASTM F 1271 : 1990 : R2001 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM F 1271 : 1990 : R2018 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
ASTM F 1386 : 1992 : R2010 Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding
ASTM F 1201 : 1988 : R2010 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ASTM F 1201 : 1988 : R2004 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ASTM F 1271 : 1990 : R2012 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM F 1200 : 1988 : R2004 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
ASTM F 2015 : 2000 Standard Specification for Lap Joint Flange Pipe End Applications
ASTM F 1172 : 1988 : R1998 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ASTM F 2015 : 2000 : R2006 Standard Specification for Lap Joint Flange Pipe End Applications
ASTM F 1120 : 1987 : R2010 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F 1020 : 1986 : R2018 Standard Specification for Line-Blind Valves for Marine Applications
CSA Z275.2 : 2015 OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS
ASTM F 1120 : 1987 : R2004 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F 1139 : 1988 : R2015 Standard Specification for Steam Traps and Drains
ASME PV CODE 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS
ASTM F 1298 : 1990 : R2012 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
ANSI/ASSE Z117.1 : 2009 SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES
ASTM F 1199 : 1988 : R2004 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150&#176F Maximum)
BS ISO 13577-3:2016 Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases
CSA N289.3 : 2010 : INC : UPD 1 : 2012 DESIGN PROCEDURES FOR SEISMIC QUALIFICATION OF NUCLEAR POWER PLANTS
BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
ASTM F 2014 : 2000 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
ASTM F 1298 : 1990 : R2018 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
NFPA 56 : 2017 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
ASTM F 1386 : 1992 : R2016 : EDT 1 Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding
ASTM F 1007 : 1986 : R1996 : EDT 1 Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application
ISO 18647:2017 Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms
NEMA SM 24-1991 (R1997, R2002) LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW
VDI 3842:2004-06 Vibrations in piping systems
CSA B139 : 2015 INSTALLATION CODE FOR OIL-BURNING EQUIPMENT
CSA N290.8 : 2015 TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS
ASTM F 1298 : 1990 : R2006 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
IEEE C37.38-1989 IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
ISO 16111:2008 Transportable gas storage devices Hydrogen absorbed in reversible metal hydride
ASTM F 1122 : 2004 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
ASTM F 1122 : 2004 : R2015 : EDT 1 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
ASTM F 2014 : 2000 : R2006 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
N289.1-08 (R2013) General requirements for seismic design and qualification of CANDU nuclear power plants
BS ISO 16111:2008 Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
ASTM F 1155 : 2010 Standard Practice for Selection and Application of Piping System Materials
ASTM F 1298 : 1990 : R2001 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
ASME PV CODE 7 : 2017 BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS
ASTM F 681 : 1982 : R1998 Standard Practice for Use of Branch Connections
ISO 13577-3:2016 Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases
NFPA 2001 : 2018 CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
ASTM A 1091/A1091M : 2016 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
ASTM F 1298 : 1990 : R1995 : EDT 1 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
ASTM A 1091/A1091M : 2016 : EDT 1 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
ASTM F 1020 : 1986 : R2006 Standard Specification for Line-Blind Valves for Marine Applications
ASTM F 1201 : 1988 : R2016 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
N289.3-10 (R2015) Design procedures for seismic qualification of nuclear power plants
CAN/CSA-Z662-15 Oil and gas pipeline systems
ISO 13577-2:2014 Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
NFPA 85 : 2015 BOILER AND COMBUSTION SYSTEMS HAZARDS CODE
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
ASTM F 1199 : 1988 : R2010 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150&#176F Maximum)
ASTM F 1386 : 1992 : R1997 Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding
CSA N293 : 2012 : INC : UPD 1 : 2017 : R201700 FIRE PROTECTION FOR NUCLEAR POWER PLANTS
ASTM F 1122 : 2004 : R2010 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
ASTM F 1139 : 1988 : R2004 Standard Specification for Steam Traps and Drains
NASA-STD-8719.17C:2017 NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS)
ASTM F 1200 : 1988 : R1998 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
NFPA 87 : 2018 FLUID HEATERS
ASTM B 673 : 2005 : R2011 : EDT 1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
ASTM F 1172 : 1988 : R2015 : EDT 1 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
ASTM F 1007 : 1986 : R2002 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
CSA N289.1 : 2008 : INC : UPD 1 : 2014: R201300 GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS
CSA N393:13 (R2018) Fire protection for facilities that process, handle, or store nuclear substances
ANSI/ASSE A10.15 : 1995 : R2005 SAFETY REQUIREMENTS FOR DREDGING
ASTM F 1120 : 1987 : R1998 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F 1386 : 1992 : R2004 Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding
BS ISO 13577-2:2014 Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
ASTM F 1200 : 1988 : R2010 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
ASTM F 1172 : 1988 : R2004 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ASTM F 1020 : 1986 : R2001 Standard Specification for Line-Blind Valves for Marine Applications
ASTM F 1139 : 1988 : R1998 Standard Specification for Steam Traps and Drains
ISO 24817:2017 Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection
S6-14 Canadian Highway Bridge Design Code
CSA N289.1 : 2008 GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS
ASTM F 1200 : 1988 : R2016 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
NEMA SM 23-1991 (R1997, R2002) STEAM TURBINES FOR MECHANICAL DRIVE SERVICE
ASTM F 1199 : 1988 : R2015 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
ASTM F 1271 : 1990 : R1995 : EDT 1 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM B 673 : 2005 : EDT 1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
ANSI/ASSE A10.15 : 1995 : R2011 SAFETY REQUIREMENTS FOR DREDGING
ASME A17.1-2016/CSA B44-16 Safety code for elevators and escalators (Bi-national standard, with ASME A17.1)
UFC 3-430-11 : 2001 UNIFIED FACILITIES CRITERIA - BOILER CONTROL SYSTEMS
BS EN ISO 10440-2:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free)
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
ASTM F 681 : 1982 : R2004 Standard Practice for Use of Branch Connections
ASTM B 673 : 2005 : R2011 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection
ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
CSA N289.3 :2010 DESIGN PROCEDURES FOR SEISMIC QUALIFICATION OF NUCLEAR POWER PLANTS
ASTM F 1120 : 1987 : R2015 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F 2014 : 2000 : R2013 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ASTM F 1020 : 1986 : R1996 : EDT 1 Standard Specification for Line-Blind Valves for Marine Applications
ISO 19859:2016 Gas turbine applications Requirements for power generation
ASTM F 2934 : 2012 Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
ASTM F 1007 : 1986 : R2014 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
ASTM F 1323 : 2014 : REDLINE Standard Specification for Shipboard Incinerators
ASTM F 681 : 1982 : R2008 Standard Practice for Use of Branch Connections
ASTM F 1199 : 1988 : R1998 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150&#176F Maximum)
ASTM F 1139 : 1988 : R2010 Standard Specification for Steam Traps and Drains
ASTM F 2934 : 2012 : R2018 Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
ASTM F 2015 : 2000 : R2013 Standard Specification for Lap Joint Flange Pipe End Applications
ASTM B 673 : 2005 : R2016 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
ASTM F 1201 : 1988 : R1998 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
CSA N289.1 : 2008 : INC : UPD 1 : 2015 : R201300 GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS
N293-12 (R2017) Fire protection for nuclear power plants
ASTM F 1155 : 2010 : R2015 Standard Practice for Selection and Application of Piping System Materials
CSA N293 : 2012(R2018) FIRE PROTECTION FOR NUCLEAR POWER PLANTS
ASTM F 1007 : 1986 : R2007 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
BS EN 13941 : 2009 DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
BS ISO 3977-3:2004 Gas turbines. Procurement Design requirements
ASTM F 1020 : 1986 : R2011 Standard Specification for Line-Blind Valves for Marine Applications
ASTM B 834 : 2017 : REDLINE Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts
DD CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
ASTM F 1271 : 1990 : R2006 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
BS EN ISO 24817:2017 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
ASTM B 673 : 2005 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
API SPEC 12L : 2008 SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
API 620 REDLINE : 2008 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
NFPA 85C : 1991 PREVENTION OF FURNACE EXPLOSIONS & IMPLOSIONS IN MULTIPLE BURNER BOILER FURNACES
ASME PTC19.11 : 2008 STEAM AND WATER SAMPLING, CONDITIONING, AND ANALYSIS IN THE POWER CYCLE
NBR 12615 : 1992 SISTEMA DE COMBATE A INCENDIO POR ESPUMA
API 2T REDLINE : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
ASME STP-PT-003 : 2005 HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES
ANSI B88.2 : 1974 PROCEDURE FOR BENCH CALIBRATION OF TANK LEVEL GAGING TAPES AND SOUNDING RULES
API RP 2T : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
ASME B16.50 : 2013 WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS
ASME PTB 11 : 2017 GUIDE FOR ASME BPVC SECTION 1 STAMP HOLDERS
ASME PTC19.3 : 1974(R2004) PERFORMANCE TEST CODE - PART 3: TEMPERATURE MEASUREMENT
ASME PTC19.11 : 2008 : R2013 STEAM AND WATER SAMPLING, CONDITIONING, AND ANALYSIS IN THE POWER CYCLE
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
ASME PTC19.3 TW : 2016 THERMOWELLS
ASME STP-PT-002 : 2005 ASME SECTION 1 PED GUIDE - SUPPLEMENT TO GUIDE FOR ASME STAMP HOLDERS USE OF ASME SECTION 1 TO MEET THE EC PRESSURE EQUIPMENT DIRECTIVE (97/23/EC)
API 2T : 2010 : R2015 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
ASME PVHO 1 : 2016 SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY

ASTM B 625 : 2017 : REDLINE Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip
ASTM B 247M : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
ASTM B 234M : 2017 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
ASTM B 688 : 1996 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
AWWA C606 : 2015 GROOVED AND SHOULDERED JOINTS
AWWA C153/A21.53 : 2011 DUCTILE-IRON COMPACT FITTINGS
ASTM A 691 : 1998 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
ASTM B 361 : 2016 : REDLINE Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
AWWA C207 : 2013 STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM)
ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM B 234 : 2017 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
MSS SP 6 : 2017 STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS
ASTM B 338 : 2017 : REDLINE Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
ASTM B 348 : 2013 : REDLINE Standard Specification for Titanium and Titanium Alloy Bars and Billets
ASTM A 47/A47M : 1999 Standard Specification for Ferritic Malleable Iron Castings
ASME TDP 1 : 2013 PREVENTION OF WATER DAMAGE TO STEAM TURBINES USED FOR ELECTRIC POWER GENERATION: FOSSIL-FUELED PLANTS
ASTM A 376/A376M : 2017 : REDLINE Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
ASME B18.2.4.6M : 2010 METRIC HEAVY HEX NUTS
ASTM B 409 : 2006 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
ASTM B 265 : 2015 : REDLINE Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
AWWA C500 : 2009 METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
ASTM B 467 : 2014 : REDLINE Standard Specification for Welded Copper-Nickel Pipe
NFPA 1963 : 2014 FIRE HOSE CONNECTIONS
ASTM B 575 : 2017 : REDLINE Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip
ASTM A 181/A181M : 2014 : REDLINE Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
ASTM A 299/A299M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
ANSI/AWWA C115/A21.15 : 2011 FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES
MSS SP 83 : 2014 CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS)
ASTM B 473 : 2007 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
ASTM A 395/A395M : 1999 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
ANSI/AWWA C200 : 2017 STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER
ASTM A 409/A409M : 2015 : REDLINE Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM B 466/B 466M : 2014-05 SPECIFICATION FOR SEAMLESS COPPER-NICKEL PIPE AND TUBE
ASME B16.10 : 2017 FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES
ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
FCI 79.1 : 2009 STANDARD FOR PROOF OF PRESSURE RATINGS FOR PRESSURE REGULATORS
ASTM A 516/A516M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
MSS SP 80 : 2013 BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES
ASTM A 358/A358M : 2015 : REDLINE Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASME B16.42 : 2016 DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300
AWWA C151/A21.51 : 2017 DUCTILE-IRON PIPE, CENTRIFUGALLY CAST
ASME B31.3:2016 PROCESS PIPING
MSS SP 67 : 2017 BUTTERFLY VALVES
ASTM B 584 : 2014 : REDLINE Standard Specification for Copper Alloy Sand Castings for General Applications
AWWA C600 : 2010 INSTALLATION OF DUCTILE-IRON MAINS AND THEIR APPURTENANCES
ASME B31.4 : 2016 PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
AWWA C208 : 2012 DIMENSIONS FOR FABRICATED STEEL WATER PIPE FITTINGS
AWWA C150/A21.50 : 2014 THICKNESS DESIGN OF DUCTILE-IRON PIPE
ASTM B 221 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASCE 7 05 : 2006 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
PFI ES 24 : 2013 PIPE BENDING METHODS, TOLERANCES, PROCESS AND MATERIAL REQUIREMENTS
ASME B16.15 : 2013 CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250
ASTM B 161 : 2005 : EDT 1 Standard Specification for Nickel Seamless Pipe and Tube
ASME B16.20 : 2012 METALLIC GASKETS FOR PIPE FLANGES
MSS SP 97 : 2012 INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS
API 5L : 2012 LINE PIPE
AWWA C304 : 2014 DESIGN OF PRESTRESSED CONCRETE CYLINDER PIPE
ANSI/AWWA C300 : 2016 REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE
ASTM A 437/A437M : 2015 : REDLINE Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
AWWA C504 : 2015 RUBBER-SEATED BUTTERFLY VALVES
ASTM A 254 : 1997 Standard Specification for Copper-Brazed Steel Tubing
AWS D10.10 : 1990 LOCAL HEATING OF WELDS IN PIPING AND TUBING, RECOMMENDED PRACTICE FOR
ASME B16.18 : 2012 Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br>
MSS SP 42 : 2013 CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600)
ASTM A 420/A420M : 2016 : REDLINE Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASME B16.1 : 2015 Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250
ASTM A 214/A214M : 1996 Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
MSS SP 68 : 2017 HIGH PRESSURE BUTTERFLY VALVES WITH OFFSET DESIGN
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
MSS SP 51 : 2012 CLASS 150LW CORROSION RESISTANT FLANGES AND CAST FLANGED FITTINGS
ASTM A 928/A928M : 2014 : REDLINE Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
AWS A3.0 : 0 STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING
AWWA C302 : 2016 REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE
ASTM B 88 : 2016 : REDLINE Standard Specification for Seamless Copper Water Tube
ASTM B 61 : 2015 : REDLINE Standard Specification for Steam or Valve Bronze Castings
ASCE 7 10 : 2010 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
AWS QC1 : 2007 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS
MSS SP 53 : 2012 QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD
AWWA C111/A21.11 : 2017 RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS
ASTM B 861 : 2014 : REDLINE Standard Specification for Titanium and Titanium Alloy Seamless Pipe
ASME B36.10M : 2015 WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASTM B 649 : 2017 : REDLINE Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925,<brk/> UNS N08031, UNS N08034, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
NFPA 85 : 2015 BOILER AND COMBUSTION SYSTEMS HAZARDS CODE
MSS SP 94 : 2015 QUALITY STANDARD FOR FERRITIC AND MARTENSITIC STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - ULTRASONIC EXAMINATION METHOD
ASTM A 965/A965M : 2014-05 SPECIFICATION FOR STEEL FORGINGS, AUSTENITIC, FOR PRESSURE AND HIGH TEMPERATURE PARTS
AWWA C110/A21.10 : 2012 DUCTILE-IRON AND GRAY-IRON FITTINGS
ASTM A 453/A453M : 2017 : REDLINE Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
MSS SP 61 : 2013 PRESSURE TESTING OF VALVES
ASTM A 217/A217M : 2014 : REDLINE Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
ASTM B 828 : 2016 : REDLINE Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
AWWA C301 : 2014 PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE
MSS SP 95 : 2014 SWAGE(D) NIPPLES AND BULL PLUGS
MSS SP 93 : 2014 QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - LIQUID PENETRANT EXAMINATION METHOD
ASTM B 675 : 2002 Standard Specification for UNS N08367 Welded Pipe
ASTM A 105/A105M : 2014-11 SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS
ASTM E 125 : 1963 : R2003 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASTM A 449 : 2014 : REDLINE Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
ASME B16.21 : 2016 NONMETALLIC FLAT GASKETS FOR PIPE FLANGES
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
MSS SP 106 : 2012 CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300
ASTM E 280 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ASTM B 43 : 2015 : REDLINE Standard Specification for Seamless Red Brass Pipe, Standard Sizes
ASTM A 139/A139M : 2016 : REDLINE Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
ASTM B 151/B151M : 2013 : REDLINE Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
ASTM A 530/A530M : 2012-06 SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE
MSS SP 55 : 2011 QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES
ASME B16.4 : 2016 GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250
AWWA C509 : 2015 RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
ASTM B 705 : 2017 : REDLINE Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
MSS SP 75 : 2014 HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS
ASME B16.50 : 2013 WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS
ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
MSS SP 54 : 2013 QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - RADIOGRAPHIC EXAMINATION METHOD
ASTM B 862 : 2014 : REDLINE Standard Specification for Titanium and Titanium Alloy Welded Pipe
API 570 : 2016 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
MSS SP 9 : 2013 SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES
MSS SP 88 : 2015 DIAPHRAGM VALVES
ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
PFI ES 16 : 0 ACCESS HOLES, BOSSES AND PLUGS FOR RADIOGRAPHIC INSPECTION OF PIPE WELDS
ASTM A 515/A515M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ASTM B 62 : 2017 : REDLINE Standard Specification for Composition Bronze or Ounce Metal Castings
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
ASTM B 247 : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM B 381 : 2013 : REDLINE SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS
MSS SP 79 : 2011 SOCKET WELDING REDUCER INSERTS
ANSI Z223.1 : 2018 NATIONAL FUEL GAS CODE
ASTM A 671 : 2009 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASME B16.22 : 2013 WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS
ASTM A 815/A815M : 2017 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM B 804 : 2002 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
MSS SP 43 : 2013 WROUGHT AND FABRICATED BUTT-WELDING FITTINGS FOR LOW PRESSURE, CORROSION RESISTANT APPLICATIONS
MSS SP 58 : 2009 PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION
ASME B16.25 : 2012 BUTTWELDING ENDS
ASTM A 285/A285M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
MSS SP 105 : 2016 INSTRUMENT VALVES FOR CODE APPLICATIONS
ASME B16.48 : 2015 LINE BLANKS
ASME B16.3 : 2016 MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300

View more information

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.