• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASME B31.12 : 2014

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

HYDROGEN PIPING AND PIPELINES

Available format(s)

Hardcopy , PDF

Superseded date

24-12-2019

Superseded by

ASME B31.12 : 2019

Language(s)

English

Published date

16-07-2018

£184.29
Excluding VAT

Pertains to piping in gaseous and liquid hydrogen service and to pipelines in gaseous hydrogen service.

DocumentType
Standard
ISBN
9780791869604
Pages
272
PublisherName
American Society of Mechanical Engineers
Status
Superseded
SupersededBy
Supersedes

This Code is applicable to piping in gaseous and liquidhydrogen service and to pipelines in gaseous hydrogenservice. This Code is applicable up to and including thejoint connecting the piping to associated pressure vesselsand equipment but not to the vessels and equipmentthemselves. It is applicable to the location and type ofsupport elements but not to the structure to which thesupport elements are attached. The design for pressureand temperature shall be in accordance with the requirementsof Part IP for industrial piping and Part PL forpipelines. This Code is presented in the following partsand appendices:(a) Part GR—General Requirements. Part GR containsrequirements applicable to and referenced by otherparts. It contains definitions and requirements for materials,welding, brazing, heat treating, forming, testing,inspection, examination, operation, and maintenance.It also contains quality system topics common to theother parts.(b) Part IP — Industrial Piping. Part IP includesrequirements for components, design, fabrication,assembly, erection, inspection, examination, and testingof piping.(c) Part PL — Pipelines. Part PL sets forth requirementsfor components, design, installation, and testingof hydrogen pipelines.(d) Mandatory Appendices I through IX(e) Nonmandatory Appendices A through FEach part defines requirements for piping or pipelines,as applicable, within its scope. The requirements aredifferent for different aspects of components, design,fabrication, installation, assembly, erection, inspection,examination, and testing. It is required that each partbe used in conjunction with the General Requirementssection but independent of the other parts. The jointconnecting piping governed by two different parts shallbe subject exclusively to the requirements of one of thetwo parts. It is not intended that this edition of this Codebe applied retroactively to existing hydrogen systems.

ASME FFS 1 : 2007 FITNESS-FOR-SERVICE
NFPA 55 : 2016 COMPRESSED GASES AND CRYOGENIC FLUIDS CODE
NFPA 67 : 2016 GUIDE ON EXPLOSION PROTECTION FOR GASEOUS MIXTURES IN PIPE SYSTEMS
I.S. EN 62282-3-100:2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
API 941 : 2016 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
NFPA 56 : 2017 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
MSS SP 105 : 2016 INSTRUMENT VALVES FOR CODE APPLICATIONS
CSA/ANSI HGV 2 : 2014 COMPRESSED HYDROGEN GAS VEHICLE FUEL CONTAINERS
CSA HPIT 1:15 (R2020) Compressed hydrogen powered industrial truck on-board fuel storage and handling components
CSA HGV 4.7:2013:(R2018) AUTOMATIC VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
CSA HGV 4.9 : 2016 HYDROGEN FUELING STATIONS
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
CSA HPIT 1 : 2015 COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS
IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
BS EN 62282-3-100:2012 Fuel cell technologies Stationary fuel cell power systems. Safety
CSA/ANSI HGV 3.1 : 2015 FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES
EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
API 579-1 : 2016 FITNESS-FOR-SERVICE
CEI EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE

ASME PV CODE 8 DIV 2 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES
ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
API STD 1104:2013 WELDING OF PIPELINES AND RELATED FACILITIES
ASQ Q9000 3:1997 Quality Management And Quality Assurance Standards - Part 3: Guidelines For The Application Of Ansi/Iso/Asqc Q9001-1994 To The Development, Supply, Installation And Maintenance Of Computer Software
ASTM A 691 : 1998 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
ASTM B 361 : 2016 : REDLINE Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASNT SNT TC 1A : 2016 TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
AISC 317 : 1992 VOLUME 2 CONNECTIONS MANUAL OF STEEL CONSTRUCTION ASD
ASME B31.1 : 2016 POWER PIPING
MSS SP 6 : 2017 STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS
SAE J518_201303 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
ASTM A 139 : 2000 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ASTM A 537/A537M : 2013 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
ASME B31.2 : 1968 FUEL GAS PIPING
CSA HGV 4.10 : 2012 STANDARD FOR FITTINGS FOR COMPRESSED HYDROGEN GAS AND HYDROGEN RICH GAS MIXTURES
ASTM A 204/A204M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
ASTM B 467 : 2014 : REDLINE Standard Specification for Welded Copper-Nickel Pipe
NFPA 1963 : 2014 FIRE HOSE CONNECTIONS
MSS SP 83 : 2014 CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS)
ASME PV CODE 8 DIV 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
API 609 : 2016 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
ASTM B 466/B 466M : 2014-05 SPECIFICATION FOR SEAMLESS COPPER-NICKEL PIPE AND TUBE
ASME B16.10 : 2017 FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES
ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
ASTM A 516/A516M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
MSS SP 80 : 2013 BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES
ASME B16.42 : 2016 DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300
ASTM A 350 : 2004 SPECIFICATION FOR FORGINGS, CARBON AND LOW ALLOY STEEL, REQUIRING NOTCH TOUGHNESS TESTING FOR PIPING COMPONENTS
ASME B31.3:2016 PROCESS PIPING
API std 602 : 2015 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
ASME PV CODE 8 DIV 3 : 2017 BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS
ASME B31.4 : 2016 PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
MSS SP 72 : 2010 BALL VALVES WITH FLANGED OR BUTT-WELDING ENDS FOR GENERAL SERVICE
ASTM B 221 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
API STD 600 : 2015 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
ASCE 7 05 : 2006 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
SAE J513_199901 Refrigeration Tube Fittings—General Specifications
ASME B16.15 : 2013 CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250
ASTM B 169/B169M : 2015 : REDLINE Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
ASME B16.20 : 2012 METALLIC GASKETS FOR PIPE FLANGES
MSS SP 97 : 2012 INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS
API 5L : 2012 LINE PIPE
MSS SP 81 : 2017 STAINLESS-STEEL OR STAINLESS-STEEL-LINED, BONNETLESS, KNIFE GATE VALVES WITH FLANGED ENDS
ASME B16.18 : 2012 Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br>
MSS SP 42 : 2013 CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600)
NFPA 10 : 2018 PORTABLE FIRE EXTINGUISHERS
ASME B16.1 : 2015 Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ASME FFS 1 : 2007 FITNESS-FOR-SERVICE
NACE RP 04 72 : 2005 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
ASTM A 563 : 2015 : REDLINE Standard Specification for Carbon and Alloy Steel Nuts
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
MSS SP 51 : 2012 CLASS 150LW CORROSION RESISTANT FLANGES AND CAST FLANGED FITTINGS
ASME PV CODE 2D METRIC : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC)
API 608 : 2012 METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS
NFPA 55 : 2016 COMPRESSED GASES AND CRYOGENIC FLUIDS CODE
MSS SP 65 : 2012 HIGH PRESSURE CHEMICAL INDUSTRY FLANGES AND THREADED STUBS FOR USE WITH LENS GASKETS
ASME B16.28 : 1994 WROUGHT STEEL BUTT-WELDING SHORT RADIUS ELBOWS AND RETURNS
AWWA C302 : 2016 REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE
ASTM B 88 : 2016 : REDLINE Standard Specification for Seamless Copper Water Tube
API 599 : 2013 METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS
ASTM B 61 : 2015 : REDLINE Standard Specification for Steam or Valve Bronze Castings
API 941 : 2016 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
MSS SP 53 : 2012 QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD
ASME B36.10M : 2015 WELDED AND SEAMLESS WROUGHT STEEL PIPE
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
SAE J514_201201 Hydraulic Tube Fittings
ASME B31.8S : 2016 MANAGING SYSTEM INTEGRITY OF GAS PIPELINES
CSA Z245.1 : 2014 STEEL PIPE
MSS SP 119 : 2010 FACTORY-MADE WROUGHT BELLED END PIPE FITTINGS FOR SOCKET-WELDING
ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
MSS SP 95 : 2014 SWAGE(D) NIPPLES AND BULL PLUGS
MSS SP 44 : 2016 STEEL PIPELINE FLANGES
API 526 : 2017 FLANGED STEEL PRESSURE-RELIEF VALVES
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASME B16.21 : 2016 NONMETALLIC FLAT GASKETS FOR PIPE FLANGES
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
ASME PV CODE 2B : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - NONFERROUS MATERIAL SPECIFICATIONS
ASME PV CODE 5 : 2017 BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
MSS SP 134 : 2012 VALVES FOR CRYOGENIC SERVICE, INCLUDING REQUIREMENTS FOR BODY/BONNET EXTENSIONS
ASTM B 43 : 2015 : REDLINE Standard Specification for Seamless Red Brass Pipe, Standard Sizes
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
MSS SP 55 : 2011 QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES
ASME B16.4 : 2016 GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250
ASME PV CODE 2A : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END)
ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
MSS SP 75 : 2014 HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS
ASME B16.50 : 2013 WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS
API 603 : 2013 CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS
ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
MSS SP 9 : 2013 SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES
MSS SP 88 : 2015 DIAPHRAGM VALVES
NACE RP 01 69 : 2002 CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS
CGA G 5.5 : 2014 HYDROGEN VENT SYSTEMS
ASME PV CODE 2D CUSTOMARY : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY)
API 579-1 : 2016 FITNESS-FOR-SERVICE
API 594 : 2017 CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
ASTM B 62 : 2017 : REDLINE Standard Specification for Composition Bronze or Ounce Metal Castings
ASTM A 524 : 1996 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
ASME B16.14 : 2013 FERROUS PIPE PLUGS, BUSHINGS, AND LOCKNUTS WITH PIPE THREADS
ASTM B 247 : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
CGA G 4.1 : 2009 CLEANING EQUIPMENT FOR OXYGEN SERVICE
MSS SP 79 : 2011 SOCKET WELDING REDUCER INSERTS
ASME PV CODE 2C : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS
ASTM A 671 : 2009 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASME B16.22 : 2013 WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS
ASME B31E : 2008 STANDARD FOR THE SEISMIC DESIGN AND RETROFIT OF ABOVE-GROUND PIPING SYSTEMS
MSS SP 43 : 2013 WROUGHT AND FABRICATED BUTT-WELDING FITTINGS FOR LOW PRESSURE, CORROSION RESISTANT APPLICATIONS
ASTM B 171/B171M : 2012-12 SPECIFICATION FOR COPPER-ALLOY PLATE AND SHEET FOR PRESSURE VESSELS, CONDENSERS, AND HEAT EXCHANGERS
AWS A3.0M/A3.0 : 2010 STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING
MSS SP 58 : 2009 PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION
ASME B16.25 : 2012 BUTTWELDING ENDS
ASTM A 285/A285M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
MSS SP 105 : 2016 INSTRUMENT VALVES FOR CODE APPLICATIONS
ASME B16.48 : 2015 LINE BLANKS
ASTM A 302/A302M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASME B16.3 : 2016 MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.