• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASME B46.1 : 2009

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)

Available format(s)

Hardcopy , PDF

Superseded date

26-06-2020

Language(s)

English

Published date

20-08-2010

Preview

Foreword
Committee Roster
Correspondence With the B46 Committee
Executive Summary
Section 1 - Terms Related to Surface Texture
Section 2 - Classification of Instruments for Surface
            Texture Measurement
Section 3 - Terminology and Measurement Procedures for
            Profiling, Contact, Skidless Instruments
Section 4 - Measurement Procedures for Contact, Skidded
            Instruments
Section 5 - Measurement Techniques for Area Profiling
Section 6 - Measurement Techniques for Area Averaging
Section 7 - Nanometer Surface Texture and Step Height
            Measurements by Stylus Profiling Instruments
Section 8 - Nanometer Surface Roughness as Measured With
            Phase Measuring Interferometric Microscopy
Section 9 - Filtering of Surface Profiles
Section 10 - Terminology and Procedures for Evaluation of Surface
             Textures Using Fractal Geometry
Section 11 - Specifications and Procedures for Precision Reference
             Specimens
Section 12 - Specifications and Procedures for Roughness Comparison
             Specimens
Nonmandatory Appendices
A - General Notes on Use and Interpretation of Data Produced
    by Stylus Instruments
B - Control and Production of Surface Texture
C - A Review of Additional Surface Measurement Methods
D - Additional Parameters for Surface Characterization
E - Characteristics of Certain Area Profiling Methods
F - Descriptions of Area Averaging Methods
G - Observations on the Filtering of Surface Profiles
H - Reference Subroutines
I - A Comparison of ASME and ISO Surface Texture
    Parameters
J - Functional Standards

This Standard is concerned with the geometric irregularities of surfaces.

DevelopmentNote
Supersedes MIL STD 10 (08/2005)
DocumentType
Standard
ISBN
9780791832622
Pages
124
PublisherName
American Society of Mechanical Engineers
Status
Superseded
SupersededBy
Supersedes

FED-STD-H28-2 Revision B:1991 Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms
AN849 Revision 13:2015 NIPPLE, HOSE
MIL-DTL-9395-40 Revision C:2006 SWITCHES, PRESSURE, (GAGE), TYPE 2, LOW LEVEL TO 5 AMPERE
MS123124 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1/2 INCH, ALUMINUM
MIL A 55339 : A ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES & WITHIN SERIES) GENERAL SPECIFICATION FOR
MIL-DTL-23351 Revision B:2003 Waveguides, Single Ridge and Double Ridge, (No S/S Document)
MIL F 3922 : B FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR
MIL-DTL-32371-10 Base Document:2012 Fittings, Hydraulic Tube, Sleeve, Double Angle
MIL-I-60870 Base Document:1968 INITIATOR, CARTRIDGE ACTUATED, DELAY, 15, XM17, XM19, XM21, XM23, XM25, & XM110 METAL PARTS ASSEMBLY
MIL-S-8879 Revision C:1991 SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR
GGG-S-121 Revision F:1992 SCREWDRIVER AND SCREW STARTER, HAND
MS27266 Revision B:2009 Insert, Electrical Connector - Ramp Power, 416/240 Volts, Male
MS27070 Revision E:2013 SLEEVE, HOSE COUPLING
MIL-DTL-7885-16 Base Document:1996 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 4)
AWS D14.4/D14.4M : 2012 SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT
MIL-DTL-85069 Revision D:2012 Sleeves and Grommets, Fastener,
MS24357 Revision B:2016 FLANGE, DROGUE CONE - TYPE MA-2 RECEPTION COUPLING, FLIGHT PRESSURE REFUELING, OUTLINE DIMENSIONS FOR
API SPEC 19OH : 2018 OPENHOLE ISOLATION EQUIPMENT
NASM 23460 : 2004 PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING
DOD-STD-35-24 Revision A:1978 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, BEARINGS
A-A-59200 Base Document:1998 GRINDING MACHINES, SURFACE, ROTARY TABLE, VERTICAL SPINDLE
MIL-N-45938 Revision A:1995 NUT, PLAIN, CLINCH AND NUT, SEL-LOCKING, CLINCH GENERAL SPECIFICATION FOR
MIL-B-8907 Revision A:1983 BOLT, ALLOY STEEL, SHEAR AND TENSILE (156 KSI FSU AND 260 KSI FTU, 450 DEGREE F) EXTERNAL WRENCHING, FLANGED HEAD
MIL-DTL-7885-12 Base Document:1996 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE
PIP VEEVJ001 : 2015 GASKET GUIDELINES
MS24355 Revision C:2016 COUPLING, RECEPTION - TYPE MA-2, FLIGHT-PRESSURE-REFUELING, ASSEMBLY OF
MIL-HDBK-115 Revision C:2016 U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES)
AWS D1.1/D1.1M PORTUGUESE : 2010 STRUCTURAL WELDING CODE - STEEL
SAE J 911 : 2017 SURFACE TEXTURE, ROUGHNESS (RA), PEAK COUNT(PC), AND MEAN PROFILE SPACING, (RSM) MEASUREMENT OF METALLIC COATED AND UNCOATED STEEL SHEET/STRIP TO BE FORMED AND/OR TO BE PAINTED
SAE AS 4842 : 2016 FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION
MIL-B-87114 Revision A:1978 BOLTS, RECESS DRIVE, GENERAL SPECIFICATION FOR
MIL C 24640 : A CABLE, LIGHT WEIGHT, ELECTRIC, LOW SMOKE, FOR SHIPBOARD USE GENERAL SPECIFICATION FOR
MIL-T-8606 Revision C:1973 TUBING, STEEL, CORROSION RESISTANT (18-8 STABILIZED AND EXTRA LOW CARBON)
DOD P 63245 : A (2) PROJECTILE, HE, 155MM, XM795 METAL PARTS ASSEMBLY
SAE AMS 3242 : 2011 CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85
SAE ARP 1233 : 2012 GLAND DESIGN, ELASTOMERIC O-RING SEALS, DYNAMIC RADIAL, 1500 PSI MAX
SAE ARP 618 : 2013 BOSS FITTINGS, METAL SEAL, FLUID SYSTEMS: GENERAL REQUIREMENTS FOR
SAE AS 81819 : 2010 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR
MIL-P-23460 Revision E:1991 PIN, QUICK-RELEASE, SELF-RETAINING POSITIVE-LOCKING
MIL-P-60812 Base Document:1968 PROJECTILE, 4.2INCH, WP, SMOKE, M328A1 METAL PARTS ASSEMBLY
NASM 21059 : 2002 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT STEEL, 125 KSI FTU, 450 DEGREES F
MS27069 Revision H:2017 SOCKET, HOSE COUPLING
DOD-P-63478 Base Document:1981 PIN, STRAIGHT, HEADLESS (DOWEL), GENERAL SPECIFICATION FOR, METRIC
MIL-A-27471 Revision C:1993 ADAPTER, PRESSURE-REDUCER, IN-LINE CRU-43A/A
SAE AMS 7907D : 2015(R2018) BERYLLIUM BARS, RODS, TUBING, AND SHAPES, INSTRUMENT GRADE
MIL-D-14826 Base Document:1970 DELAY ELEMENT, CARTRIDGE. M24 ASSEMBLY
MIL-P-60646 Revision B:1984 PROJECTILE, 105 MM, HEAT-T, M456A1 METAL PARTS
MIL F 16377 : G FIXTURE, LIGHTING, INCANDESCENT, GENERAL LIGHTING 100 WATTS, 120 VOLTS, DRIPPROOF 15 DEGREES, SYMBOLS 89 & 90.2
MS 124691 124730 : E INSERT, CRES HELICAL COIL FINE THREAD, 1-1/2 DIA NOMINAL LENGTH
MS24591 Revision D:2007 Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1 through 2 Inches Tubing Sizes
SAE AS 85720 : 2018 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR
MIL E 917 : E ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE)
GGG-P-446 Revision A:1964 PLATE, LAPPING
MIL-DTL-24211-2 Revision E:2013 Gaskets, Waveguide Flange (Flat Face)
MIL-B-81793 Revision D:1993 BEARING, BALL, PRECISION, FOR INSTRUMENTS AND ROTATING COMPONENTS
AWS B4.0:2016 STANDARD METHODS FOR MECHANICAL TESTING OF WELDS
MIL-STD-1312-9 Revision A:1984 FASTENER TEST METHODS - METHOD 9, STRESS CORROSION
MIL-DTL-24646 Revision C:2015 FUSE BOXES, GENERAL SPECIFICATION FOR
MS27391 Revision F:2013 Nipple, Flareless, Tube to Hose - Swivel Nut
MS27071 Revision D:2013 UNION, NIPPLE
SAE AMS7910D:2015(R2018) BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED
SAE AMS 2303 : 2016 STEEL CLEANLINESS, AIRCRAFT QUALITY, MARTENSITIC CORROSION-RESISTANT STEELS, MAGNETIC PARTICLE INSPECTION PROCEDURE
MIL-DTL-24509 Revision B:2017 Valves, Flanged, Balland Plugfor Sewageand Seawater Service
MIL-R-43010 Revision B:1988 REMOULDING SET, SOIL & COMPACTION
MIL-R-43003 Revision F:1994 RELEASE, CARGO PARACHUTE, 5,000 POUND CAPACITY
MIL-C-60861 Base Document:1971 CARTRIDGE, DELAY, M128 ASSEMBLY
MIL-STD-1312-18 Base Document:1985 FASTENER TEST METHOD 18, ELEVATED TEMPERATURE TENSILE STRENGTH
A-A-59330 Base Document:1998 Grinding Machine, Surface, Reciprocating-Table, Horizontal-Spindle, Power-Feed
MS123121 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 5/16 INCH, ALUMINUM
MIL-DTL-24211-1 Revision D:2013 Gaskets, Waveguide Flange (Cover)
IPC 6012 RUSSIAN : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS
SAE AMS 4944 : 2015 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0AL - 2.5V COLD WORKED, STRESS RELIEVED
SAE AMS 4945 : 2014 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED
SAE AMS 7819 : 2013 MOLYBDENUM ALLOY BARS, 0.48TI - 0.90ZR - 0.02C, ARC CAST, STRESS RELIEVED
SAE MA 1937 : 2018 NUT, HEX, FREE RUNNING, PROCUREMENT SPECIFICATION FOR, METRIC
SAE ARP 1234 : 2012 GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC AXIAL, WITHOUT BACK-UP RINGS
MS16051 Revision G:2014 COUPLING, GROUND COOLING, COMBAT TYPE AIRCRAFT
MIL E 17807 : C ELEVATOR, WEAPON AND CARGO, ELECTROMECHANICAL (SHIPBOARD)
MIL-F-14805 Revision B:1977 FUSE, MT, M571 ASSEMBLY
MIL-P-60620 Revision D:1985 PROJECTILE ASSEMBLY FOR CARTRIDGE, SMOKE, WP, 81MM, M375A1
MS20761 Revision C:2016 ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES
MIL-B-85667-10 Base Document:1991 BOLT, SLEEVE, 100 DEGREES TENSION FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES A-286 PIN, 160 KSI FTU, 450 DEGREES F
MIL PRF 0032287 : 0 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT
MIL-P-70447 Base Document:1984 PROJECTILE, PRACTICE, 155MM, M804 LOADING ASSEMBLING AND PACKING
SAE AMS 7482 : 1995 STUDS - STEEL, CORROSION AND HEAT RESISTANT,ROLL THREADED AFTER HEAT TREATMENT, 1800F (980 C) SOL HEAT TREATED
SAE AS 7460 : 2017 BOLTS AND SCREWS, TITANIUM ALLOY, 6.0AL-4.0V, PROCUREMENT SPECIFICATION FOR
MS28754 Revision E:2012 FITTING END, SELF-SEALING FUEL HOSE, SWIVEL, DETACHABLE, FLANGED, 45 DEGREES
MIL C 83723/80 : B CONNECTOR, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SOLDER FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT), (SERIES 1II, CLASSES H AND Y)
MS21077 Revision H:1994 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, NON-METALLIC INSERT, STEEL 125 KSI FTU, 250 DEG F
MIL-V-2961 Revision D:1990 VALVES, GLOBE, PRESSURE REDUCING, GAS SERVICE
MS21953 Revision C:2015 BODY, CLUSTER FITTING, ONE-WAY, FLARE
MS20757 Revision C:2013 Connector, Fixed Flange, to Hose
MIL C 83723/81 : D CONNECTOR, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT)(SERIES 111, CLASSES H AND Y)
MIL-C-81703 Base Document:1971 CONNECTOR, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING
MIL-E-46440 Revision D:1979 ELEMENT, IGNITION, ELECTRIC, M18, PARTS
MS27394 Revision C:2014 ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT
MIL-DTL-3922-56 Revision D:2010 FLANGES, WAVEGUIDE (COVER) (ROUND, 8 HOLE)
MS70101 Revision C:1986
DOD-M-24672 Base Document:1986 MOLDS, AND MOLD HEATING PLATEN FOR MOLDING ELECTRICAL CONNECTORS AND CABLES (METRIC)
MS70108 Revision C:1986 LINK PARACHUTE CONNECTOR
GGG-C-2773 Base Document:1992 CYLINDER RECONDITIONING & CORRECTION EQUIPMENT - PORTABLE
MIL W 12133 : D WASHER, SPRING TENSION GENERAL SPECIFICATION FOR
MIL-D-60851 Base Document:1962 DELAY ELEMENT, CARTRIDGE, 45, ASSEMBLY
MS123138 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 7/8 INCH, ALUMINUM
MS123134 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 3/8 INCH, ALUMINUM
MIL-DTL-7891 Revision G:2008 FILLER VALVE, AIRCRAFT OXYGEN
MS9193 Revision A:2010 NIPPLE, TUBE - SAE-AMS5639, BOSS
MIL T 11891 : E TRACK SHOE ASSEMBLY, TRACK SHOE SETS, TRACK SHOE PADS, & TRACK SHOE BUSHINGS, VEHICULAR, ELASTOMERIZED
MIL-DTL-7885-14 Base Document:1996 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1)
MIL V 0024695 : B VALVE, HOSE ASSEMBLY, AND ADAPTER, VENT AND TEST HYDRAULIC SERVICE, GENERAL SPECIFICATION FOR (METRIC)
MIL-DTL-3922-54 Revision E:2013 Flanges, Waveguide (Cover) (Square, 4 Hole)
MIL-DTL-3922-55 Revision D:2013 Flanges, Waveguide (Cover) (Round, 6 Hole)
MIL A 002550 : C AMMUNITION, GENERAL SPECIFICATION FOR
MIL-V-2042 Revision E:1990 VALVE, REDUCING, WATER SERVICE, FOR NAVAL SHIPBOARD USE
MIL C 46270 : C CARTRIDGE, INITIATOR, DELAY, M71
GG-G-86 Revision C:1987 GAGE, SHEET AND PLATE, TWIST DRILL, DRILL ROD, AND WIRE
MIL-PRF-7908 Revision E:2009 VALVES, CHECK, AIRCRAFT LOW PRESSURE OXYGEN SYSTEMS
MIL C 83723/88 : C CONNECTOR ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (FLANGE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT),(SERIES 1II, CLASSES H AND Y)
MIL-C-48565 Base Document:1975 CASE, CARTRIDGE, 90MM, M108B1
MIL-W-3970-22 Revision B:2014 WAVEGUIDE ASSEMBLIES, RIGID, CAST, 90-DEGREE E-PLANE BEND, FULL CORRAL
MIL-DTL-3922 Revision E:2016 FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR
EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
AWS D1.1/D1.1M : 2015 STRUCTURAL WELDING CODE-STEEL
MS9095 Revision B:2010 NIPPLE, TUBE - ALUMINUM, BOSS
MIL-P-46199 Base Document:1989 PLATE: ALUMINUM OXIDE CERAMIC (FOR USE IN ARMOR COMPOSITES)
MIL-C-22520-29 Base Document:1977 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL FOR WIRE BARREL SIZES 12 THROUGH 20
AN842 Revision 13:2013 ELBOW - PIPE TO HOSE, 90 DEGREES
MIL-P-50398 Base Document:1979 PROJECTILE, 165MM, TP M624, METAL PARTS
MIL P 70551 : 0 PROJECTILE, 81MM, SMOKE, RP, M819 METAL PARTS
MS27611 Revision H:2018 VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE
MS27635 Revision C:2009 NIPPLE, FLARELESS, TUBE TO HOSE, SWIVEL NUT
DOD-S-63543 Base Document:1982 STUD & ROD, THREADED, METRIC, GENERAL SPECIFICATION FOR
SAE MAP 4296 : 2015 DRAWING INTERPRETATIONS, STANDARD MACHINING PRACTICE, TUBE FITTINGS AND CONNECTORS, FLUID SYSTEMS, METRIC
SAE MA 4035 : 2012 RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC
SAE AS 7452 : 2014 BOLTS AND SCREWS, STEEL, LOW ALLOY HEAT TREATED, ROLL THREADED
SAE AS 7459 : 2015 BOLTS AND SCREWS, STEEL UNS K14675 TENSILE STRENGTH 195 KSI FATIGUE AND STRESS-RUPTURE RATED PROCUREMENT SPECIFICATION
ABMA 10A : 2001 METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
MIL-DTL-7885-11 Base Document:1996 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE (TYPE I, STYLE A, CLASS 1)
MIL-HDBK-1897 Base Document:1996 TOLERANCES FOR INVESTMENT CASTINGS
SAE AS 4892 : 2012 INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED, PROCUREMENT SPECIFICATION FOR
SAE AS 27198 : 2014 SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988
SAE AS 8914 : 2016 BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION
SAE AMS 4943 : 2015 TITANIUM ALLOY, HYDRAULIC, SEAMLESS TUBING, 3.0AL - 2.5V, ANNEALED
SAE MA 3378 : 2018 BOLTS AND SCREWS, UNS N07001, TENSILE STRENGTH 1210 MPA, THREAD AND FILLET RADIUS ROLLED BEFORE AGING, PROCUREMENT SPECIFICATION, METRIC
SAE AS 1339 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC
MS27395 Revision D:2014 ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT
SAE AS 4444 : 2013 FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI
SAE AMS 6466 : 2017 STEEL, CORROSION-RESISTANT, WELDING WIRE, 5.2CR - 0.55MO
SAE AMS 2304 : 2015 STEEL CLEANLINESS, SPECIAL AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE
SAE AS 8952 : 2005 BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING
MIL-DTL-7885-28 Base Document:1996 RIVETS, BLIND, STRUCTURAL, FLANGED DOME HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 4)
MIL-B-25870 Revision A:1972 BEARINGS SINTERED METAL, PROCESSING OF
SAE MAP 3439 : 2012 O-RING GROOVE DESIGN FOR PACKING PREFORMED, ELASTOMERIC O-RING SEALS, STATIC, AXIAL COMPRESSION, METRIC
SAE AMS 2634 : 2013 ULTRASONIC INSPECTION, THIN WALL METAL TUBING
MIL B 85667/7 : A BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, NICKEL ALLOY 718 PIN, 125 KSI FSU, 220 KSI FTU, 450 DEG F.
SAE AS 5270 : 2013 BOLTS, SCREWS AND STUDS, NICKEL ALLOY, UNS N07718, WORK-STRENGTHENED, TENSILE STRENGTH 220 KSI, PROCUREMENT SPECIFICATION
SAE AMS 2633 : 2017 ULTRASONIC INSPECTION, CENTRIFUGALLY-CAST, CORROSION-RESISTANT STEEL TUBULAR CYLINDERS
SAE AS 614 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC
SAE AMS 3025 : 2018 POLYALKYLENE GLYCOL HEAT TREAT QUENCHANT
MS27282 Revision B:2009 Insert, Electrical Connector - Ramp Power, 416/240 Volts, Female
MIL-DTL-24227 Revision A:2018 Fittings and Flanges, Cast Bronze, Silver-Brazing, Suitable for Ultrasonic Inspection
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
MS20759 Revision C:2013 Elbow, Hose, Flanged Swivel, 90 Degrees
MIL-C-26637 Revision A:1987 CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES LT
MIL-P-63208 Revision B:1985 PROJECTILE, 105 MM, HEAT T, M622 METAL PARTS
MS24590 Revision C:2007 Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 3/16 through 3/4 Inch Tubing Sizes
MIL-B-8906 Revision C:1988 BOLT, ALLOY STEEL, SHEAR AND TENSILE, (132 KSI MIN FSU AND 220 KS MIN FTU), 45 DEGREE F, SPLINE DRIVE
MIL-P-63514 Revision A:1986 PROJECTILE, 105MM, TP-T, M489A1, METAL PARTS ASSEMBLY
MIL-STD-1699 Revision B:1992 NONDESTRUCTIVE EVALUATION OF BUTT WELDS IN CRANE AND RAILROAD RAILS
MIL-S-21472 Revision C:1988 SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR
MIL-B-22227 Revision A:1976 BEARING, BALL, ANNULAR, GENERATOR AND MOTOR-GENERATOR
MS123123 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 7/16 INCH, ALUMINUM
ASME B89.3.7 : 2013 GRANITE SURFACE PLATES
AN844 Revision 13:2013 ELBOW - PIPE TO HOSE, 45 DEGREES
JSSG-2006 Base Document:1998 JOINT SERVICE SPECIFICATION GUIDE - AIRCRAFT STRUCTURES
MIL-B-8976 Base Document:1969 BEARINGS, PLAIN, SELF-ALIGNING, ALL METAL
MS27077 Revision D:2014 FLANGE, SWIVEL, RETAINING
MIL-P-70997 Base Document:1991 PROJECTILE, 81MM, HE, M821E1/M889E1 BODY ASSEMBLY
MIL-P-14829 Base Document:1968 PROJECTILE, 4.2 INCH TACTICAL CS, XM633 METAL PARTS ASSEMBLY
DOD STD 1312/9 : LATEST FASTENER TEST METHODS, METRIC, METHOD 9, STRESS CORROSION
AN 840 : 0011 ADAPTER, STRAIGHT, PIPE TO HOSE
DOD-T-63549 Base Document:1982 THUMBSCREW, WING HEAD, METRIC, GENERAL SPECIFICATION FOR (METRIC)
AN917 Revision 9:2011 TEE, PIPE
MIL-M-8555 Revision C:1984 MISSILE, GUIDED, DESIGN AND CONSTRUCTION, GENERAL SPECIFICATION
MS22046 Revision C:1974 RING - PARACHUTE HARNESS "D"
AN846 Revision 9:2013 ELBOW, HOSE, 45 DEGREES
MIL-W-3970-23 Revision B:2014 WAVEGUIDE ASSEMBLIES, RIGID, CAST, 90-DEGREE E-PLANE BEND, MITER AND RADIUS-BACK MITER, FULL CORRAL
MIL-DTL-45932 Revision A:2015 INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR
MIL-P-48323 Revision C:1984 PROJECTILE, 8 INCH, HE, RA, M650 ROCKET MOTOR BODY ASSEMBLY
MIL-S-45909 Revision C:1989 STUD, LOCKED IN - RING LOCKED SERRATED
SAE MA 4510 : 2015 FITTINGS, WELD, FLUID CONNECTION, 35,000 KPA, METRIC
SAE AS 22227 : 2014(S2018) BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR
SAE AMS P 5315 : 2013 ACRYLONITRILE-BUTADIENE (NBR) RUBBER FOR FUEL-RESISTANT SEALS 60 TO 70
SAE AS 7330 : 2012 RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT STEEL PROCUREMENT SPECIFICATION FOR
SAE J 1502 : 2013 CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC
GGG-P-61 Revision A:1966 PARALLELS; STEEL AND CAST-IRON, PRECISION-GROUND
MIL-R-83459 Revision A:1978 RIVET, TITANIUM, BIMETAL 95 KSI F SU GENERAL SPECIFICATION FOR
MS21206 Revision A:1991 WASHER COUNTERSUNK AND PLAIN FOR USE WITH BOLTS AND NUTS UP TO & INCLUDING 220 KSI FTU
MIL V 24509 : A VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE
MIL C 83723/89 : D CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT), (SERIES 3, CLASSES H, N, AND Y)
MIL-P-63226 Base Document:1979 PROJECTILE GUIDED, 155MM, XM712 WARHEAD FOR
AN848 Revision 13:2015 Elbow, Hose, 90 Degree
MIL P 60584 : A PROJECTILE, 155MM, SMOKE, WP, M110 METAL PARTS ASSEMBLY
MIL-S-22141 Revision B:1976 STEEL, INVESTMENT CASTINGS ALLOY AND CARBON
AN924 Revision 14:2018 NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING
MS9769 Revision B:2008 REDUCER, TUBE - STRAIGHT, TUBE TO BOSS
MS21946 Revision F:2012 Body, Cluster Fitting, One-Way, Internal Boss
MS27638 Revision E:2009 MANDREL SLEEVE SETTING
MIL-B-23964 Revision D:1981 BOLT, SELF-RETAINING, POSITIVE LOCKING
MIL-C-14814 Revision B:1978 CARTRIDGE, IMPULSE, M270
MIL-C-24706 Base Document:1988 COUPLING, PIPE, HEAT-RECOVERABLE
MIL-B-63354 Revision A:1987
MIL-S-45933 Base Document:1971 STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR
SAE MAM 5914 : 2003 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED
AWWA C507 : 2015 BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM)
A-A-51141 Revision A:1990 PLATE, LAPPING
SAE AMS 4368 : 2017 ALUMINUM ALLOY, DISCONTINUOUSLY REINFORCED HOT ISOSTATICALLY PRESSED SHAPES 6061B/SIC/40P (3[MU]M) (T1P)
A-A-59459 Base Document:1999 GRINDING MACHINE, TOOL AND CUTTER, COMPUTER NUMERICAL CONTROL (CNC)
SAE AMS 7855 : 2017 COLUMBIUM (NIOBIUM) ALLOY BARS, RODS, AND WIRE, 10W - 2.5ZR, RECRYSTALLIZED
SAE AS 4976 : 2012 Insert, Screw Thread, Non-Locking, UNS S66286, Locked in, Key Locked, Procurement Specification for(STABILIZED Mar 2019)
SAE AMS 7904E : 2015(R2018) Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade
SAE AS 7475 : 2015 BOLTS, COBALT-CHROMIUM-NICKEL ALLOY, UNS R30159, TENSILE STRENGTH 260 KSI, PROCUREMENT SPECIFICATION
MIL-F-81177 Revision E:1984 FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED ALLOY STEEL, GENERAL SPECIFICATION FOR
AWS D1.5M/D1.5 : 2015 BRIDGE WELDING CODE
MIL-B-85667-2 Revision A:1991 BOLT, SLEEVE, 100 DEG. REDUCED FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES PH 13-8MO PIN, 125 KSI FSU
MIL-P-60596 Revision B:1990 PROJECTILE, HE, 8 INCH M106 METAL PARTS ASSEMBLY
SAE AMS 7906D : 2015(R2018) BERYLLIUM BARS, RODS, TUBING, AND SHAPES, STANDARD GRADE
SAE AS 7252 : 2015 NUTS, SELF-LOCKING, STEEL HIGH STRENGTH, ALL METAL 450 DEGREES F USE, UN AND UNJ THREAD FORM
MS27086 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut
MIL-DTL-7885-20 Base Document:1996 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE, (TYPE 1, STYLE A, CLASS 3)
MIL-DTL-3928-7 Revision E:2011 SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE (COAXIAL) (MANUALLY AND SOLENOID OPERATED) CLASSES 1 (TYPE N CONNECTORS) AND 7 (TYPE BNC CONNECTORS)
NASM16562:2010 PIN, SPRING, TUBULAR, SLOTTED
MIL-PRF-31031 Revision C:2014 CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR
MIL-DTL-3922-57 Revision D:2013 Flanges, Waveguide (Cover) (Round, 8 Hole) (2 Holes Centered Horizontally, 2 Holes Centers Vertically)
MIL-G-10944 Revision B:1965 GAGE, DIMENSIONAL CONTROL
MIL-I-60231 Revision B:1995 IGNITION ELEMENT, ELECTRIC, M55 ASSEMBLY
NASM1312-11:2017 FASTENER TEST METHODS METHOD 11 TENSION FATIGUE
MIL-N-85353 Base Document:1981 NUTS (FASTENERS) INTERNALLY THREADED, PRELOAD LOCKING 450 DEG F 800 DEG F,1200 DEG F, GENERAL SPECIFICATION FOR
ASME AG-1 : 2019 CODE ON NUCLEAR AIR AND GAS TREATMENT
MIL-DTL-24705 Revision B:2010 PENETRATORS, MULTIPLE CABLE, ELECTRIC CABLE, GENERAL SPECIFICATION FOR
MIL-C-46227 Revision D:1973 COMPONENTS FOR PROPELLANT ACTUATED DEVICES
MIL C 15730 : M COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
A-A-52531 Base Document:1995 KINGPIN, FIFTH WHEEL, 2 INCH AND 3.5 INCH, UNIVERSAL
MIL-P-63293 Revision B:1983 PROJECTILE, 105 MM, HEAT T MP, M456A2 METAL PARTS ASSEMBLY
MIL-PRF-39012 Revision F:2014 CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MIL BULL 343 : A DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF
MIL F 24646 : SUPP 1 FUSE BOXES, FEEDER DISTRIBUTION, TOTALLY ENCLOSED, 125/25O VOLTS, DIRECT CURRENT, THREE WIRE BUSES, TWO WIRE BRANCHES, O-3O AMPERE MIDGET FUSES, SYMBOLS 6O9, 61O AND 611
IPC A 600 SWEDISH : H ACCEPTABILITY OF PRINTED BOARDS
MIL-A-24741 Base Document:1990 ASSEMBLIES, METAL ELECTRICAL BACKPLANE, ONE AND TWO LAYER, GENERAL SPECIFICATION FOR
MIL-A-14813 Base Document:1968 ACTUATOR, CREW EJECTION 1000-42 REMANUFACTURED METAL PARTS ASSEMBLY
MIL-B-85598 Base Document:1988 BEARINGS, ELASTOMERIC GENERAL SPECIFICATION FOR
DOD N 70329 : 0 NUT, PLAIN, ROUND, BALL AND ROLLER BEARINGS, METRIC, GENERAL SPECIFICATION FOR
MIL-N-85615-4 Base Document:1989 NUT ASSEMBLY, SELF-SEALING, LOW PROFILE, FLOATING, SELF-LOCKING, 125 KSI FTU, 225 DEGREES F
IPC A 600 JAPANESE : H ACCEPTABILITY OF PRINTED BOARDS
IPC A 600 CHINESE : G ACCEPTABILITY OF PRINTED BOARDS
MIL-P-60815 Revision A:1968 PROJECTILE, TP-T, 152MM XM411E1 METAL PARTS ASSEMBLY
MIL-P-50357 Base Document:1969 PROJECTILE, 60MM. H.E., M49A3 METAL PARTS ASSEMBLY (ALLOY STEEL)
MS21949 Revision C:2014 BOLT-CLUSTER FITTING, SINGLE PORT-FLARE
MIL P 81716 : 0 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC (MINUS 65 DEG F TO PLUS 275 DEG F)
AN838 Revision 9:2011 Elbow, Tube to Hose, 90 Degrees
MIL C 39012 : C GENERAL SPECIFICATION FOR RADIO FREQUENCY COAXIAL CONNECTORS
MIL-C-48424 Base Document:1973 CASE, CARTRIDGE, 76MM, M88B1
MIL-C-81769 Base Document:1972 CHEMICAL MILLING OF METALS, SPECIFICATION FOR
SAE MA 1784 : 2012 SPACERS AND WASHERS, PROCUREMENT SPECIFICATION FOR, METRIC
SAE AS 4604 : 2003 HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS
MIL-PRF-81975 Revision C:2008 COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4
MIL C 27536 : B COUPLING, CLAMP, GROOVED, V-BAND
MIL-PRF-25961 Revision H:2008 VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-50/A
GGG-R-425 Revision B:1974 RIVET SETS, PNEUMATIC TOOL
MIL-C-14836 Revision A:1972 CASE, PROJECTILE, BURSTER, M9A1
IPC 6012 POLISH : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS
MIL-F-60612 Revision C:1977 FUZE, MTSQ, M548 ASSEMBLY
MIL-L-28796 Base Document:1973 LINE ASSEMBLIES, RADIO FREQUENCY TRANSMISSION GENERAL SPECIFICATION FOR
SAE AMS 3077 A : 1994(S2018) COMPOUND, CORROSION PREVENTIVE, SOFT FILM, THIXOTROPIC, COLD APPLICATION
MIL-DTL-14997 Revision C:2009 Projectile, 105MM, Illuminating, M314A3 and Projectile, 105MM, Infrared Illuminating, M1064 Loading Accessories
MIL F 70546 : 0 FIN ASSEMBLIES, MORTAR CARTRIDGE, 81MM, M28, M29
AN914 Revision 11:2012 ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES
MIL-STD-2131 Revision A:1991 LAUNCHER, EJECTION GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR
SAE AS 7949 : 2004 BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD
SAE ARP 4266 : 2014 HOLE CONTOUR, FLUID PASSAGE, TUBE FITTING
SAE AS 7454 : 2016 BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT 135000 PSI TENSILE STRENGTH, NORMALIZED AND TEMPERED, ROLL THREADED
SAE ARP 1232 : 2012 GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL
SAE AS 7470 : 2012 BOLTS AND SCREWS, STEEL, CORROSION AND MODERATE HEAT RESISTANT HEAT TREATED, ROLL THREADED
MIL-P-8564 Revision D:1970 PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG]
MIL-DTL-45952 Revision A:2014 PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR
MIL-D-52353 Revision A:1975 DRIFTPIN, STEEL
GGG-G-15 Revision C:1975 GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC)
MIL-S-14249 Revision C:1981 STRAIGHTEDGE, RADIAL LINE, SLOTTED TEMPLET.
SAE AS 4875 : 2016 FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION
SAE AS 39029 : 2017 CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR
SAE AS 4891 : 1999 STUD, LOCKED IN, KEY LOCKED, UNS S66286, CLASSIFICATION: 140 KSI PROCUREMENT SPECIFICATION FOR
SAE AIR 6553 : 2014 MEASUREMENT UNCERTAINTY AND CONSUMER RISK
SAE AMS 7910 : 2015 BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED
SAE MA 1339 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC
SAE AS 27196 : 2014 SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROCARBON RUBBER, AMS7276
MIL-DTL-15743 Revision F:2017 SWITCHES, ROTARY, ENCLOSED
MIL-DTL-2118 Revision D:2017 TRAP, STEAM, ANGLE, THERMOSTATIC
SAE AS 7205 : 2012 SPRING PINS, TUBULAR, CARBON STEEL, PROCUREMENT SPECIFICATION FOR
MIL-PRF-23256 Revision C:1998 VALVE ASSEMBLY, SEAL
MIL-S-24686 Revision A:1992 Sprinkler, Automatic, Quick Response
MS27636 Revision B:2009 ELBOW, FLARELESS, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT
MIL-DTL-24643 Revision C:2009 Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for
SAE AMS 2449 : 2010 GRINDING OF HVOF SPRAYED TUNGSTEN CARBIDE COATINGS APPLIED TO HIGH STRENGTH STEELS
SAE AS 5377 : 2000 NUT, SELF-LOCKING, 0.7500 THRU 1.5000 THREAD SIZES, UNS S66286, 160,000 PSI, 800 DEGREE F, UNJ THREAD - PROCUREMENT SPECIFICATION
MIL-T-60102 Revision A:1974 THRUSTER, CARTRIDGE ACTUATED, M9 METAL PARTS ASSEMBLY
MIL C 83413 : A CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR
MIL-PRF-83861 Revision D:2013 FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE
MS24588 Revision C:2007 Nipple, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 3/16 through 3/4 Inch Tubing Sizes
SAE AMS 5564 : 2013 STEEL, CORROSION RESISTANT, TUBING 19CR - 10NI (SAE 30304) HIGH-PRESSURE HYDRAULIC, WELDED PLUS ULTRASONICALLY TESTED OR SEAMLESS COLD DRAWN, ONE EIGHTH - HARD TEMPER
SAE AS 838 : 2013 AIRCRAFT HYDRAULIC STARTER/PUMPS
SAE AS 7251 : 2014 NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 DEGREES F USE, UNJ THREAD FORM
SAE AMS 7258 : 2001 RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER FUEL RESISTANT, LOW SHRINKAGE 65-75
SAE AMS 2422 : 2014 PLATING, GOLD
SAE MA 4070 : 2013 PINS, PROCUREMENT SPECIFICATION FOR, METRIC
SAE AS 8942 : 2014 BEARINGS, PLAIN AND PTFE LINED, SELF - ALIGNING
SAE AS 4873 : 2014 GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL AND FACE 800 PSI MAXIMUM SERVICE
SAE J 1453/1 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS
SAE AMS 4993F : 2017 TITANIUM ALLOY, BLENDED POWDER COMPACTS, SINTERED, 6AL - 4V
SAE AS 4723 : 2012 INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR
SAE AS 4060 : 2013 TUBE FITTINGS SWAGED JOINT, ROLLER EXPANDER, MANUAL PROCESS, REQUIREMENTS FOR
SAE AMS 2425 : 2012 PLATING, GOLD FOR THERMAL CONTROL
SAE AMS 5561 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC
SAE MA 4368 : 2018 NUT, PLAIN ROUND - SPANNER WRENCHING, SHAFT MOUNTED, UNS S66286, PROCUREMENT SPECIFICATION FOR, METRIC
MIL-R-43838 Revision B:1993 RELEASE, CARGO PARACHUTE, AIRDROP, M-2
A-A-59332 Revision A:2013 GRINDING MACHINE, CYLINDRICAL, EXTERNAL, CENTER-TYPE, COMPUTER NUMERICAL CONTROL (CNC)
MIL-T-60800 Base Document:1968 THRUSTER, CARTRIDGE ACTUATED, M17, REMANUFACTURED METAL PARTS ASSEMBLY
MIL-B-60806 Revision C:1974 BOOSTER, M125A1 ASSEMBLY LESS BOOSTER PELLET AND LEAD CUP CHARGE
MIL-D-60866 Base Document:1968 DELAY ELEMENT CARTRIDGE, M27 ASSEMBLY
MIL-B-46654 Revision C:1969 BOOSTER, M125A1 ASSEMBLY LESS BOOSTER PELLET AND LEAD CUP CHARGE
SAE MA 1943 : 2012 NUTS, SELF-LOCKING, UNS N07001, 760 DEGREE C, 1100 MPA AND 1210 MPA, PROCUREMENT SPECIFICATION FOR, METRIC
SAE MA 3376 : 2018 Bolts & Screws, UNS G87400 Tensile Strength 860 MPa & 1000 MPa Procurement Specification, Metric
SAE AS 5857 : 2010 GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS, STATIC APPLICATIONS
MSS SP 112 : 2016 QUALITY STANDARD FOR EVALUATION OF CAST SURFACE FINISHES - VISUAL AND TACTILE METHOD
MS17185 Revision A:2006 CLAMP (SYNCHRO)
MIL-T-60677 Base Document:1968 THRUSTER, CARTRIDGE ACTUATED, M9 REMANUFACTURED METAL PARTS ASSEMBLY
AGA XQ1201 : 2012(R2017) AGA REPORT NO. 3, ORIFICE METERING OF NATURAL GAS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES
SAE AMS 7909 : 2015 ALUMINUM BERYLLIUM, NNS PREFORMS HOT ISOSTATIC PRESSED 38AL - 62BE
SAE AS 7481:1996(S2015) STUDS, STEEL, UNS S66286 AGED AFTER ROLL THREADED PROCUREMENT SPECIFICATION FOR
SAE AMS 2689 : 2016 FUSION WELDING TITANIUM AND TITANIUM ALLOYS
SAE AS 7478 : 2017 BOLTS AND SCREWS, STEEL, UNS S66286, CLASSIFICATION: 130 KSI/1200 DEGREES F, 1800 DEGREES F SOLUTION HEAT TREATED, AGED AFTER ROLL THREADED, PROCUREMENT SPECIFICATION FOR
SAE AMS 2632 : 2008 INSPECTION, ULTRASONIC, OF THIN MATERIALS 0.5 INCH (12.77 MM) AND UNDER IN CROSS-SECTIONAL THICKNESS
MIL-DTL-45918 Revision A:2009 CLEVISES AND CONNECTORS (ROD END)
MIL-F-45911 Revision A:1973 FITTINGS, AUTOMOTIVE TUBE, SPHERICAL SLEEVE (COMPRESSION) TYPE, BRASS
MIL-S-7742 Revision D:1991 SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES, GENERAL SPECIFICATION FOR
GGG-C-313 Revision D:1995 CHISELS, HAND: CAPE, DIAMOND POINT, COLD, ROUND NOSE, AND SIDE CUTTING
MIL-R-60897 Base Document:1968 REMOVER, AIRCRAFT CANOPY, M8A1 METAL PARTS ASSEMBLY (CONVERSION)
MIL-W-8982 Revision D:1989 WRENCHES, SPLINED, HIGH STRENGTH, THIN WALL, GENERAL SPECIFICATION FOR
MS24466 Revision K:1998 BEARING, ROLLER, NEEDLE DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, TYPE 6, ANTIFRICTION, INCH
IPC A 600 GERMAN : H ACCEPTABILITY OF PRINTED BOARDS
MIL-B-83050 Revision D:1985 BOLT, SELF RETAINING, IMPEDANCE TYPE
MS123127 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 3/4 INCH, ALUMINUM
MIL-DTL-3922-52 Revision D:2010 FLANGES, WAVEGUIDE (PRESSURIZABLE CONTACT)
MIL C 83723 : E CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS GENERAL SPECIFICATION FOR
DOD P 16232 : F PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE (FOR FERROUS METALS)
MIL-S-14197 Revision B:1977 STUD, PHOTOGRAMMETRIC SLOTTED TEMPLETS
MIL-F-18280 Revision F:1995 FITTING, FLARELESS TUBE, FLUID CONNECTION
MIL-PRF-55339 Revision C:2005 Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for
MIL-DTL-32373 Base Document:2011 Plug, Machine Thread, Magnetic: Drain
SAE AS 4417A : 2014 NUTS, SELF-LOCKING, ALLOY, CORROSION AND HEAT RESISTANT, HIGH STRENGTH, ALL METAL, SOLID FILM LUBRICATED, 1400 DEGREES F, PROCUREMENT SPECIFICATION
MIL-T-60699 Base Document:1969 THRUSTER, CARTRIDGE ACTUATED, M7, REMANUFACTURED METAL PARTS ASSEMBLY
API 11D2 : 2010 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS
AWS C7.2M : 2010 RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND ALLIED PROCESSES
MIL T 62410 : LATEST TUBE ASSEMBLY METAL, SWAGED HYDRAULIC, (M1 TANK)
MIL-T-24270 Revision B:1983 THERMOWELLS FOR THERMOMETERS AND ELECTRICAL TEMPERATURE SENSORS GENERAL SPECIFICATION FOR
MIL-DTL-3655 Revision D:2004 Connector, Plug and Receptacle, Electrical (Coaxial, Series Twin), and Associated Fittings, General Specification for
MIL-F-5509 Revision D:1978 FITTING, FLARED TUBE, FLUID CONNECTION
MIL-DTL-3922-68 Revision B:2016 FLANGES, WAVEGUIDE COVER (BUTT MOUNT) (SQUARE, 4 HOLE)
MIL V 24630 : 0 VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID
MIL C 22442/32 : A CABLE ASSEMBLY, RADIO FREQUENCY (AIRCRAFT AUDIO), ASSOCIATED PARTS
PIP VESLP001 : 2012 LOW-PRESSURE, WELDED VESSEL SPECIFICATION
MIL-DTL-12235 Revision A:2009 PROJECTILE, PLATE-PROOFING (FOR IMPACT OR SHOCK TESTING) 37 MM M1000, 57 MM M1001, 75 MM M1002, 90 MM M1003, 105 MM M1004, 20 MM M1005, 57 MM M1001A, AND 75 MM M1002A
IPC A 600 POLISH : H ACCEPTABILITY OF PRINTED BOARDS
IPC A 600 RUSSIAN : H ACCEPTABILITY OF PRINTED BOARDS
API MPM CH22.2 : 2017 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 22 - TESTING PROTOCOL - SECTION 2 - DIFFERENTIAL PRESSURE FLOW MEASUREMENT DEVICES
MIL-DTL-3922-61 Revision E:2010 FLANGES, WAVEGUIDE (CHOKE) (ROUND, 8 HOLE)
MIL-DTL-24640 Revision C:2011 CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR
MIL-S-70334 Base Document:1987 SHIM, SOLID GENERAL SPECIFICATION FOR
DOD-N-70333 Base Document:1985 NUT, PLAIN AND SELF-LOCKING, CLINCH, METRIC (SELF-CLINCHING, KNURLED COLLAR) FIXED AND FLOATING, GENERAL SPECIFICATION FOR
MIL-DTL-32258 Base Document:2007 NUT, SELF-LOCKING (RING TYPE NON-METALLIC INSERT), HEAVY HEX, CONTROLLED ROOT RADIUS, NICKEL-COPPER ALLOY
AN918 Revision 9:2011 CROSS, PIPE
GGG-B-001222 Base Document:1967 BIT, SCREWDRIVER (AND ADAPTER, SCREWDRIVER BIT)
MIL-B-85667 Revision A:1991 BOLT, SLEEVE, STRAIGHT SHANK, PROTRUDING AND FLUSH HEAD GENERAL SPECIFICATION FOR
AN841 Revision 7:2013 ADAPTER - HOSE TO FLARED TUBE
DOD-W-63474 Revision B:1994 WASHERS, SPRING TENSION, METRIC, GENERAL SPECIFICATION FOR
MIL-PRF-57267 Base Document:2017 COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5
MIL-DTL-5070-1 Base Document:2007 Nipple Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Brazeless, One-Piece Design, Hydraulic, Fuel and Oil Lines, 1/4 through 2 Inch Tube Sizes
MIL C 24231 : D CONNECTOR, PLUGS, RECEPTACLES, ADAPTORS, HULL INSERTS AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR
MS172236THRUMS172270 Revision B:1974 NUT, SPANNER, BEARING RETAINING, AERONAUTICAL (ASG)
DOD-B-82737 Base Document:1987 BALLS, BEARING, FERROUS AND NON-FERROUS, (FOR USE IN BEARINGS, VALVES AND BEARING APPLICATIONS) - GENERAL SPECIFICATION FOR
MIL-B-46066 Revision B:1983 BANDS, ROTATING, COPPER ALLOY, CENTRIFUGAL CAST (FOR CRITICAL APPLICATIONS)
MIL-T-425 Revision J:1994 TUBE, STEEL: PIPELINE SECTION; WITH GROOVED NIPPLE WELDED ON EACH END
MIL-PRF-6164 Revision G:2012 VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING
MS27082 Revision E:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES
MIL-N-85615-10 Base Document:1989 NUT, SELF-SEALING, SELF-LOCKING, CRES, 160 KSI FTU, 250 DEGREES F & 450 DEGREES F
MIL-A-14898 Base Document:1969 ACTUATOR, ROTARY 1000-34 REMANUFACTURED METAL PARTS ASSEMBLY
MS24358 Revision B:2016 FITTING, HOSE END - TYPE MA-2, FLIGHT PRESSURE REFUELING, RECEPTION COUPLING, OUTLINE DIMENSIONS FOR
AN916 Revision 11:2011 ELBOW, PIPE, INTERNAL THREAD. 90 DEGREES
MIL H 29181 : B HASP, HIGH SECURITY,SHROUDED FOR HIGH AND MEDIUM SECURITY PADLOCK GENERAL SPECIFICATION FOR
MIL-B-7874 Revision B:1982 BOLT, MACHINE 1200 DEGREES F
MIL-B-85643 Base Document:1987 BITS, SCREWDRIVER, RIBBED GENERAL SPECIFICATION FOR
MIL F 83798 : B FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-C-28859 Revision B:1990 CONNECTOR COMPONENT PART, ELECTRICAL BACK PLANE, PRINTED WIRING, GENERAL SPECIFICATION FOR
MIL-W-80119 Revision B:1971 WELDING SYSTEMS, ELECTRON BEAM, VACUUM TYPE, COMPUTER NUMERICALLY CONTROLLED (CNC)
ABMA 10A : 2001 : R2015 METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
MIL-I-45934 Base Document:1971 INSERT, SCREW THREAD, KEYRING LOCKED, SELF LOCKING AND NON SELF LOCKING, 125, 180, AND 220 KSI FTU: GENERAL SPECIFICATION FOR
MS27624 Revision B:2009 UNION, NIPPLE
MIL-F-48076 Revision A:1984 FIN, ASSEMBLY, M158
MIL-DTL-16878 Revision H:2012 WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
MIL-STD-2193 Revision C:2012 Ship Hydraulic System Components
MIL-DTL-52525 Revision F:2008 FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR
MS27076 Revision E:2013 Nipple, Straight, Swivel Flange
MIL-I-45914 Revision A:1991 INSERT, SCREW THREAD - LOCKED IN, KEY LOCKED
SAE AS 4841 : 2017 FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION
SAE AS 604 : 2012 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC
MS27404 Revision C:2017 ADAPTER, STRAIGHT, REUSABLE, TUBE TO HOSE, LOW PRESSURE
MIL-R-46631 Revision B:1972 REMOVER, AIRCRAFT CANOPY, M1A3, ASSEMBLY
MIL-P-16610 Revision B:1975 PIN, TAPERED, PLAIN
MIL-B-913 Base Document:1993 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS (METRIC) GENERAL SPECIFICATION FOR
MS123135 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 1/2 INCH, ALUMINUM
MIL-B-23990 Revision C:1984 BLOCKS, TACKLE, WIRE ROPE, EXTRA HEAVY DUTY
MS123126 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 5/8 INCH, ALUMINUM
MS123128 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 7/8 INCH, ALUMINUM
GGG-P-463 Revision C:1973 PLATE, SURFACE, (GRANITE)
MIL-M-50768 Revision A:1972 MOVEMENT, D A M ASSEMBLY
SAE AS 7456 : 2016 STUDS, STEEL, LOW ALLOY, HEAT TREATED, ROLL THREADED
EN 4176:2005 Aerospace series - Lockbolts, 100° countersunk normal head or protruding head, tension- / sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification
MIL-R-14821 Base Document:1968 REMOVER, AIRCRAFT CANOPY. M9 REMANUFACTURED METAL PARTS ASSEMBLY
GGG-P-840 Revision B:1994 PUNCHES AND DIES, AND PUNCH AND DIE SETS: METAL CUTTING, HAND; AND PUNCH, CLIP, SHEET METAL
MS24361 Revision C:2016 RING, SPLIT - TYPE MA-2, FLIGHT PRESSURE REFUELING, RECEPTION COUPLING
MS122116THRUMS122155 Revision D:1976 INSERT CRES HELICAL COIL COARSE THREAD 1 1/2 DIA NOMINAL LENGTH
MIL-A-2550 Revision B:1973 AMMUNITION, GENERAL SPECIFICATION FOR
MIL-B-8948 Revision A:1972 Bearing, Plain, Rod End, TFE Lined, Self-Aligning
MIL-P-70543 Revision B:1994 PROJECTILE, 81MM, ILLUMINATING, M853A1, METAL PARTS
SAE MA 1547 : 2012 WRENCHES, TWELVE SPLINE, METRIC
SAE MA 2537 : 2012 GROOVE DESIGN, METAL C-RING GASKET, FACE TYPE INTERNAL PRESSURE, METRIC
MIL-B-85560 Base Document:1983 BEARING, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING GENERAL SPECIFICATION FOR
MS123129 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 INCH, ALUMINUM
MIL-DTL-24630 Revision A:2014 Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for
MIL-DTL-7885-27 Base Document:1996 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE (TYPE I, STYLE A, CLASS 3)
MIL B 85667/3 : A BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES PH 13-8MO PIN, 220 KSI FTU
MIL C 83723/90 : C CONNECTOR, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SOLDER FLANGE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT)(SERIES 1II)
SAE MA 2538 : 2015 GASKET, METAL C-RING SEAL NICKEL ALLOY, CORROSION AND HEAT RESISTANT, METRIC PROCUREMENT SPECIFICATION FOR
SAE AMS 4994 : 2015 TITANIUM ALLOY POWDERED METAL PRODUCTS, 6AL - 4V, HOT ISOSTATICALLY PRESSED, ANNEALED
MA1518B : 2012(R2018) BOLTS, SCREWS & NUTS, EXTERNAL WRENCHING, METRIC THREADS - DESIGN PARAMETERS FOR
MIL-DTL-3922-59 Revision F:2010 FLANGES, WAVEGUIDE (CHOKE) (SQUARE, 4 HOLE)
MIL-B-81936 Base Document:1973 BEARINGS, PLAIN, SELF ALIGNING (BECU, CRES RACE)
MS20762 Revision D:2016 ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES
SAE AS 7477 : 2017 BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 130 KSI, PROCUREMENT SPECIFICATION
SAE AMS 7913 : 2015 ALUMINUM-BERYLLIUM ALLOY, SHEET AND PLATE, 38AL - 62BE
SAE ARP 260 : 2012 (S2018) CONTROL LEVER CONNECTIONS (60 DEGREES V SERRATIONS)
SAE AMS 4946 : 2016 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC, 3AL - 2.5V, TEXTURE CONTROLLED, COLD WORKED, STRESS RELIEVED
MS27612 Revision M:2013 ADAPTER, HYDRAULIC BLEEDER VALVE, AIRCRAFT WHEEL BRAKE
MIL-P-60811 Revision B:1984 PROJECTILE, 105 MM, TP-T, M489 METAL PARTS ASSEMBLY
MS123132 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 1/4 INCH, ALUMINUM
MS27623 Revision D:2018 SLEEVE, HOSE COUPLING
SAE AS 27195 : 2014 SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362
SAE AS 71051 : 2015 PIPE THREADS, TAPER, AERONAUTICAL NATIONAL FORM, SYMBOL ANPT - DESIGN AND INSPECTION STANDARD
SAE AMS 7908 : 2015 BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, HOT ISOSTATIC PRESSED
SAE AMS 2628 : 2013 ULTRASONIC IMMERSION INSPECTION, TITANIUM AND TITANIUM ALLOY BILLET, PREMIUM GRADE
SAE AS 18280 : 2017 FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI
MIL-DTL-32372 Revision A:2016 Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F
MIL-PRF-83860 Revision D:2013 FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE
MIL I 45910 : C INSERT, SCREW THREAD LOCKED IN & RING LOCKED 1 SERRATED GENERAL SPECIFICATION FOR
MIL I 45916 : B INSERT,SCREW THREAD - THREAD CUTTING AND THREAD FORMING
SAE AS 7468 : 2012 BOLTS, COBALT-CHROMIUM-NICKEL ALLOY, UNS R30035, TENSILE STRENGTH 260 KSI, PROCUREMENT SPECIFICATION
SAE AS 7472 : 2015 BOLTS AND SCREWS, STEEL, CORROSION RESISTANT 125000 PSI TENSILE STRENGTH ROLL THREADED
SAE AMS 2407 : 2012 PLATING, CHROMIUM, POROUS
SAE J 2337-2 : 2017 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
MIL-B-85604 Revision A:1988 BOLT, NICKEL ALLOY 718, TENSION, HIGH STRENGTH, (125 KSI FSU & 220 KSI FTU) HIGH TEMPERATURE, SPLINE DRIVE, GENERAL SPECIFICATION FOR
MIL-DTL-3922-70 Revision C:2010 FLANGES, WAVEGUIDE (COVER) (SQUARE, 4 HOLE, BUTT MOUNT)
MS28753 Revision E:2012 FITTING END, SELF-SEALING FUEL HOSE, SWIVEL, DETACHABLE, FLANGED, STRAIGHT
A-A-52200 Base Document:1996 LINK ASSEMBLY, CONNECTOR, SEPARABLE
MIL-B-81934 Revision B:1991 BEARING, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING
MIL-P-63409 Base Document:1981 PROJECTILE, 8 INCH DUMMY M845
MIL-DTL-24231 Revision E:2013 Connectors, Plugs, Receptacles, Adapters, Hull Inserts, and Hull Insert Plugs, Pressure-Proof, General Specification for
EN ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)
SAE AS 7467 : 2013 BOLTS AND SCREWS, NICKEL ALLOY, UNS N07718, TENSILE STRENGTH 185 KSI, STRESS RUPTURE RATED, PROCUREMENT SPECIFICATION
SAE AMS 4089 : 2014 ALUMINUM ALLOY, PLATE 1.6CU - 2.2MG - 0.22CR - 5.7ZN (7475-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED
SAE AMS 4922 : 2014 TITANIUM ALLOY, SEAMLESS, HYDRAULIC TUBING 15V - 3.0CR - 3.0AL - 3.0SN COLD WORKED AND PRECIPITATION HEAT TREATED
AN911 Revision 10:2011 NIPPLE, PIPE
MIL-N-85615-3 Base Document:1989 NUT ASSEMBLY, SELF-SEALING, FLOATING, SELF-LOCKING, 125 KSI FTU, 225 DEGREES F, VARIABLE NUT HEIGHT 1/64 INCHES OVERSIZE (FOR REPAIR)
MIL-C-46273 Revision B:1990 CARTRIDGE, DELAY, M70, ASSEMBLY
MIL-DTL-87104 Revision C:2014 COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR
MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
MMM-A-132 Revision B:1994 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
MIL-F-13926 Revision B:1984 FIRE CONTROL MATERIAL MANUFACTURE AND INSPECTION, GENERAL SPECIFICATION FOR
MIL-DTL-70329 Revision A:2009 Nut, Plain, Round, Ball and Roller Bearings, Metric, General Specification for
MIL-DTL-28804-9 Revision E:2005 Connectors, Pin Contact, Electric, Rectangular, High Density, Polarized Center Jackscrew, Size 22, Crimp Removable
MS14056 Revision B:2009 CONTACTS, ELECTRICAL CONNECTOR, SHIELDED CABLE APPLICATIONS, SIZE 8
MIL V 81940/1 : B VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI, SYSTEMS
MIL-DTL-28748 Revision D:2001 CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR
MIL-H-7195 Revision G:1991 HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR
MIL-H-8775 Revision D:1976 HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR
MIL-STD-1312-16 Revision A:1991 FASTENER TEST METHODS, METHOD 16, CLAMPING FORCE FOR INSTALLATION FORMED FASTENERS
MIL C 38271 : B CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P
DOD STD 1312/11 : LATEST FASTENER, TEST METHODS METRIC, METHOD 11, TENSION FATIGUE (S/S BY DOD STD 1312-111)
DOD-STD-1312-111 Base Document:1984 FASTENER TEST METHODS, METRIC METHOD 111, TENSION FATIGUE
AWS D1.4/D1.4M : 2011 STRUCTURAL WELDING CODE - REINFORCING STEEL
NASM25027:2012 NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F
MIL-P-60601 Revision B:1981 PROJECTILE, 105MM, WP, M416 METAL PARTS ASSEMBLY
MIL A 5503 : E ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR
AWWA E103 : 2015 HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS
MIL-STD-1312-14 Base Document:1987 FASTENER TEST METHODS, METHOD 14, STRESS DUPABILITY INTERNALLY THREADED FASTENERS
NASM21060:1999 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEGREES F & 800 DEGREES F
MIL-DTL-5070-2 Base Document:2007 Nipple Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Brazeless, One-Piece Design, Hydraulic, Fuel and Oil Lines, 1/4 through 2 Inch Tube Sizes
MS9196 Revision C:2015 TEE, TUBE - SAE-AMS5646, BOSS
MIL-PRF-32287 Revision A:2011 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT
MIL S 55620 : 0 SUBSTRATES, CERAMIC, FOR DEPOSITION OF THIN FILM MICROCIRCUITS
SAE AS 83819 : 2013 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C)
SAE AMS 3065 : 2011 COMPOUND, CORROSION PREVENTIVE, THIN FILM, FINGERPRINT REMOVING
SAE AMS 2642 : 2016 STRUCTURAL EXAMINATION OF TITANIUM ALLOYS ETCH-ANODIZE INSPECTION PROCEDURE
API 590 : 1985 STEEL LINE BLANKS
MIL-DTL-781 Revision J:2014 TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR
MIL-DTL-46593 Revision B:2006 Projectile, Calibers .22, .30, .50 and 20MM Fragment-Simulating
SAE AS 4299 : 2012 RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION AND HEAT RESISTANT, UNS S66286
SAE AS 7479 : 2013 BOLTS AND SCREWS, STEEL, UNS S66286, 1650 DEGREES F SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATED BEFORE ROLL THREADED
SAE AS 4167 : 2016 WRENCHES; FLARE NUT, CROWFOOT, 12-POINT NON-DISTORTING
NASM 21045:2004 NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 450 DEGREES F, 125 KSIFTU
MIL-R-3211 Revision G:1977 RACK, STORAGE, SMALL ARMS
MIL-DTL-45910 Revision D:2015 INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR
MS27237 Revision F:2007 SHOULDER, SWIVEL FLANGE, ADAPTER, HOSE TO TUBE, HYDRAULIC FUEL AND OIL LINES, 1/2 THROUGH 3 INCHES TUBING SIZES
MIL F 27272 : B FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR
MIL-DTL-3922-60 Revision D:2013 Flanges, Waveguide (Choke) (Round, 6 Hole)
SAE MA 1568 : 2018 NUT, SELF LOCKING - UNS S66286, 425 DEGREE C AND 650 DEGREE C, 1100 MPA, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC
SAE ARP 1311 : 2015 LANDING GEAR STRUCTURES AND MECHANISMS
SAE J 2337-1 : 2014 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
MIL-F-3541 Revision C:1989 FITTING, LUBRICATION, GENERAL SPECIFICATION FOR
SAE AS 4726 : 2017 NUTS, SELF-LOCKING, UNS S66286 CLASSIFICATION: 220 KSI/850 DEGREE F PROCUREMENT SPECIFICATION
SAE AS 7466 : 2014 BOLTS AND SCREWS, NICKEL ALLOY, UNS N07718, TENSILE STRENGTH 185 KSI, FATIGUE RATED, PROCUREMENT SPECIFICATION
SAE AS 5887 : 2014 INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR
MS27238 Revision B:2007 Wire, Nut Retaining, Designed for Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
MIL-B-8914 Revision B:1966 BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION
MIL-B-85667-6 Revision A:1991 BOLT, SLEEVE, 100 DEGREES REDUCED FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, NICKEL ALLOY 718 PIN, 125 KSI FSU, 450 DEGREES F
WW-T-696 Revision E:1984 TRAPS, STEAM
MIL-DTL-32286 Base Document:2008 MATERIAL, BALL VALVE SEAT SEAL AND THRUST WASHER
MIL-DTL-3954 Revision D:2015 DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR
SAE AS 4459 : 2013 FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR
SAE AS 4897 : 1994 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR
SAE AS 7458 : 2016 STUDS, STEEL, LOW ALLOY, HEAT RESISTANT NORMALIZED AND TEMPERED, ROLL THREADED 135000 PSI TENSILE STRENGTH
SAE AS 4393 : 2015 NUT, SELF-LOCKING, UNS S66286, 1200 DEGREES F, 160,000 PSI, UNJ THREAD
MIL-DTL-55041 Revision F:2012 Switches, Waveguide, General Specification for
AN6027 Revision 5:2013 COUPLING HALF, QUICK DISCONNECT
MIL W 23351 : A WAVEGUIDE, SINGLE RIDGE AND DOUBLE RIDGE, GENERAL SPECIFICATION FOR
API 609 CHINESE : 2009 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
SAE MA 2060 : 2015 FITTINGS, WELDED, HYDRAULIC, TITANIUM AND CORROSION RESISTANT STEEL, 21 000 KPA, METRIC
SAE AS 4843 : 2016 FITTINGS, BEADED, FLUID CONNECTION
SAE AMS 2636 : 2016 ULTRASONIC IMMERSION INSPECTION TITANIUM AND TITANIUM ALLOY FORGINGS PREMIUM GRADE
SAE AS 871 : 2012 MANUFACTURING AND INSPECTION STANDARD FOR PREFORMED PACKINGS (O-RINGS)
SAE MA 2005 : 2015 TUBE FITTINGS, AEROSPACE FLUID SYSTEMS, SEPARABLE, FOR 24 DEGREE CONE, GENERAL SPECIFICATION, METRIC
MIL F 39000 : A FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR
MIL-N-25161 Revision C:1969 NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2
MIL-R-5049 Revision D:1989 RING, WIPER, PISTON ROD
MIL-N-85729 Base Document:1988 NUT, SELF-LOCKING, A-286, 160 KSI FTU, 450 DEGREES F, GENERAL SPECIFICATION FOR
MS27236 Revision B:2007 Shoulder - Designed for 45 Degrees and 90 Degrees Swivel Nut, Hose to Tube Adapters, Reusable, Hydraulic, Fuel and Oil Lines
MIL-N-85615 Base Document:1986 NUT, SEALING, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, GENERAL SPECIFICATION FOR
MIL-HDBK-660 Revision B:2012 FABRICATION OF RIGID WAVEGUIDE ASSEMBLIES (SWEEP BENDS AND TWISTS)
MIL-P-48322 Revision B:1981 PROJECTILE, 8 INCH HE, RA, M650 AFT WARHEAD SECTION & STRIPPABLE COATING ASSEMBLY
MIL-DTL-5523 Revision E:2011 VALVE; RELIEF, HYDRAULIC PRESSURE
MS20756 Revision F:2011 FLANGE, SWIVEL, RETAINING
MS20760 Revision D:2013 ADAPTER, STRAIGHT, FLANGE TO TUBE
MIL-P-63137 Revision B:1981 PROJECTILE, 8-INCH HE, RA, M650 WARHEAD SECTION FORWARD
MS27239 Revision E:2007 Nipple, Straight, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1/4 through 4 Inch Tube Sizes
MIL-S-63540 Revision C:1995 STUD, SELF-CLINCHING GENERAL SPECIFICATION FOR
MIL-C-14810 Base Document:1969 CARTRIDGE, DELAY, XM86, ASSEMBLY
MIL C 31031 : 0 CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES GENERAL SPECIFICATION FOR
GGG-S-1808 Base Document:1973 SCREWDRIVER, JEWELLERS, (SWIVEL KNOB, INTERCHANGEABLE BLADES)
API 609 : 2016 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
MIL-DTL-24704 Revision B:2011 Flanges, Four-Bolt, Square, for Hydraulic Systems, General Specification for
MIL-B-85667-9 Base Document:1991 BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES A-286 PIN, 95 KSI FSU, 160 KSI FTU, 450 DEGREES F
MIL-R-71126 Base Document:1992 RIFLE, 7.62 MILLIMETER, SNIPER W/DAY OPTICAL SIGHT AND CARRYING CASES - M24
ASME AG 1 : 2012 CODE ON NUCLEAR AIR AND GAS TREATMENT
SAE ARP 1598 : 2013(R2018) LANDING GEAR SYSTEM DEVELOPMENT PLAN
MIL-W-5013 Revision L:1991 WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-DTL-85 Revision K:2011 WAVEGUIDES, RIGID, RECTANGULAR - GENERAL SPECIFICATION FOR
MIL-C-46793 Revision C:1992 CUPOLA BODY ASSEMBLY FOR ARMORED VEHICLE BRIDGE LAUNCHER, M60A1 & M48A5 TANK CHASSIS
MIL-DTL-7885-13 Base Document:1996 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE
MIL-DTL-7034 Revision F:2005 PULLEYS, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT, GENERAL SPECIFICATION FOR
MS27087 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut
MIL-DTL-83723-79 Revision E:2010 Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Flange Mount, Bayonet Coupling, Solder Pin Contact), (Series III, Classes H, J, L, P and Y)
AN910 Revision 11:2011 COUPLING, PIPE
MIL-DTL-83723-89 Revision G:2015 CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT), (SERIES 3, CLASSES H, J, L, N, P AND Y)
MIL-R-70502 Base Document:1984 RACK STORAGE SMALL SAW, (M13)
MIL-P-50784 Base Document:1973 PROJECTILE, 105MM, HE, M1 (HF-1) METAL PARTS ASSEMBLY
MIL-P-71089 Base Document:1991 PROJECTILE, PRACTICE, 155 MM, M804E1 LOADING, ASSEMBLING AND PACKING
MMM-A-134 Base Document:1970 ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
MS27084 Revision D:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES
FED-STD-H28-21 Revision B:1984 Screw-Thread Standards for Federal Services Section 21 Metric Screw-Threads
DOD STD 100 : C NOTICE 6 ENGINEERING DRAWING PRACTICES
MIL-DTL-44481 Revision A:1996 RELEASE, CARGO PARACHUTE, AIRDROP, M-3
AN116 Revision 3:2013 Shackle, Anchor, Forger Carbon Steel Screw Pin
MIL-DTL-8789 Revision G:2015 FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR
NFPA 1981 : 2013 OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES
SAE AS 85421 : 2015 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR
MIL P 24705 : A PENETRATORS, MULTIPLE CABLE, FOR ELECTRICAL CABLES, GENERAL SPECIFICATION FOR
MIL-DTL-25427 Revision B:2009 COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR
MIL-T-46590 Revision C:1993 THRUSTER, CARTRIDGE ACTUATED, M15, METAL PARTS ASSEMBLY
MIL-STD-1312-11 Revision A:1984 FASTENER TEST METHODS, METHOD 11, TENSION AND FATIGUE
DOD-STD-35-36 Revision B:1979 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING
MS9879 Revision B:2016 SLEEVE, SWIVEL-PILOTED O-RING TUBE CONNECTION, BRAZING, AMS 5046
MIL-DTL-83296 Revision B:2009 Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for
MIL-DTL-25027 Revision H:1997 NUT, SELF-LOCKING, 250 DEG F, 450 DEG F, AND 850 DEG F
MS21958 Revision D:2011 Body, Cluster Fitting, Two-Way, 180 Degrees, Internal Boss
AN775 Revision 14:2011 BOLT - FLUID PASSAGE
MIL-DTL-28804 Revision D:1998 CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW - GENERAL SPECIFICATION FOR
MIL-F-8975 Revision B:1982 FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED CORROSION RESISTANT STEEL, HEAT RESISTANT STEEL AND TITANIUM, GENERAL SPECIFICATION FOR
MIL-T-46602 Revision A:1961 THRUSTER, CARTRIDGE ACTUATED, M19 METAL PARTS ASSEMBLY
AWS D18.1/D18.1M : 2009 SPECIFICATION FOR WELDING OF AUSTENITIC STAINLESS STEEL TUBE AND PIPE SYSTEMS IN SANITARY (HYGIENIC) APPLICATIONS
SAE AS 7461 : 2015 BOLTS AND SCREWS, TITANIUM ALLOY, 6AL-4V, UNS R56400, FATIGUE-RATED, PROCUREMENT SPECIFICATION FOR
MIL C 45918 : 0 CLEVISES AND CONNECTORS (ROD END)
MIL-DTL-45913 Revision D:2011 NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE
MIL-DTL-28754 Revision E:2016 Connectors, Electrical, Modular, and Component Parts General Specification for
FF-S-85 Revision D:2005 Screw, Cap, Slotted and Hexagon Head
MIL-DTL-83723-90 Revision G:2015 CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SOLDER OR WELD FLANGE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT), (SERIES 3, CLASSES H, J, L, N, P AND Y)
ASA/ANSI S2.45:1983 ELECTRODYNAMIC TEST EQUIPMENT FOR GENERATING VIBRATION-METHOD OF DESCRIBING EQUIPMENT CHARACTERISTICS,
MIL-N-52110 Revision F:1982 NOZZLE, FUEL & OIL SERVICING, NONAUTOMATIC SHUTOFF & NOZZLES, FUEL SERVICING AUTOMATIC SHUTOFF
MIL-P-10388 Revision H:1990 PIPE FITTING, ONE OR MORE ENDS GROOVED
MIL-O-60831 Revision C:1989 OBTURATING BAND, PLASTIC, SPLIT, (MOLDED)
MIL-T-60229 Revision A:1974 THRUSTER, CARTRIDGE ACTUATED, M7 METAL PARTS ASSEMBLY
MIL-L-52325 Revision D:1988 LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS
MIL-DTL-9395-41 Revision D:2006 SWITCHES, PRESSURE, GAUGE (TYPE 2), LOW LEVEL TO 1 AMPERE
MS123120 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1/4 INCH, ALUMINUM
MIL-V-24586 Revision A:1985 VALVE, NEEDLE, SIZE 1/4 INCH AND 1/2 INCH, UNION BONNET CONSTRUCTION
MIL-DTL-60584 Revision B:2006 Projectile,155 Millimeter - Smoke, WP, Metal Parts Assembly, M110A2
NASM 21056:2015 NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEGREES F & 800 DEGREES F
MIL-V-27296 Revision C:1993 VALVE, OXYGEN MASK, COMBINATION INHALATION AND EXHALATION
MIL-DTL-45916 Revision C:2014 INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING
MIL-B-9946 Revision E:1987 BIT, SCREWDRIVER, GENERAL SPECIFICATION FOR
GGG-W-660 Revision A:1973 SOCKET, SOCKET WRENCH AND ATTACHMENTS (FOR POWER DRIVEN IMPACT WRENCHES)
MIL-Q-45970 Revision A:1975 QUALITY ASSURANCE FOR WEAPONS AND SUPPORT MATERIAL
MS27626 Revision B:2009 NIPPLE, FLARED, TUBE TO HOSE-SWIVEL NUT
MS123130 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 1/16 INCH, ALUMINUM
MS9195 Revision B:2010 ELBOW, TUBE - SAE-AMS5639, BOSS, 45 DEGREES
A-A-59935-5 Base Document:2013 Conical Seals, Crush, 37 Degree Flared Tube Fitting, Gold
MIL-STD-777 Revision F:2012 SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS
SAE AS 5960 : 2013 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS
SAE AMS C 81769 : 2015 CHEMICAL MILLING OF METALS, SPECIFICATION FOR
SAE AS 39901 : 2012 BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH
A-A-59935-4 Base Document:2013 Conical Seals, Crush, 37 Degree Flared Tube Fitting, Corrosion Resistant Steel
SAE AMS P 5510 : 2013 O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F)
SAE AS 27197 : 2014 SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268
SAE AMS 2301 : 2015 STEEL CLEANLINESS, AIRCRAFT QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE
SAE MA 4036 : 2012 RINGS, RETAINING - TAPERED WIDTH, UNIFORM THICKNESS CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC
SAE MA 620 : 2015 HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT METRIC
SAE J 755 : 2015 MARINE PROPELLER-SHAFT ENDS AND HUBS
MIL-DTL-26202 Revision E:2006 LIGHT, MARKER, AIRPORT, SEMIFLUSH, GENERAL SPECIFICATION FOR
MIL-B-8831 Revision B:1982 BOLT, 180 KSI FTU AND 180 KSI FSU 450 DEG F PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR
SAE AS 5586 : 2005 GENERAL REQUIREMENTS FOR HYDRAULIC SYSTEM RESERVOIRS
MS123133 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 5/16 INCH, ALUMINUM
SAE AMS 3240 : 2011 CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45
SAE AS 85560 : 2013 BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR
SAE AS 4623 : 2016 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS
SAE AMS 2680 : 2010 ELECTRON-BEAM WELDING, FOR FATIGUE CRITICAL APPLICATIONS
MIL-G-15214 Revision E:1980 GAGE, DEPTH, WRIST, DIVER'S, SELF LUMINOUS DIAL
MIL-DTL-21338 Revision B:2014 WASHER, KEY RETAINING, BALL AND ROLLER BEARINGS
SAE AMS 2759/6 : 2005 GAS NITRIDING OF LOW-ALLOY STEEL PARTS
SAE AS 6235 : 2015 FACE SEAL GLAND DESIGN, STATIC, O-RING AND OTHER SEALS FOR AEROSPACE HYDRAULIC AND PNEUMATIC APPLICATIONS
SAE AMS 2675 : 2013 BRAZING, NICKEL ALLOY FILLER METAL
SAE AS 82819 : 2013 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES
SAE AS 1576 : 2016 FITTINGS, WELDED, HYDRAULIC, TITANIUM, CORROSION RESISTANT STEEL AND NICKEL, 3000 PSI HYDRAULIC
SAE AMS 3054 : 2016 OIL, LUBRICATING, LOW TEMPERATURE FOR -55 DEGREES C (-67 DEGREES F) SERVICE
SAE AMS 2412 : 2015 PLATING, SILVER, COPPER STRIKE, LOW BAKE
SAE AMS 7911 : 2015 ALUMINUM BERYLLIUM, PREFORMS HOT ISOSTATIC PRESSED AND HEAT TREATED 38AL - 62BE
SAE AMS 4355 : 2015 ALUMINUM ALLOY, DISCONTINUOUSLY REINFORCED HOT ISOSTATICALLY PRESSED SHAPES 2124A/SIC/25P (3[MU]M) (T1P)
SAE AS 7474 : 2018 BOLTS AND SCREWS, STEEL, CORROSION RESISTANT, UNS S17400 TENSILE STRENGTH 140 KSI PROCUREMENT SPECIFICATION
SAE AMS R 7362 : 2012 NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT
SAE MAM 2410 : 2000 PLATING, SILVER, NICKEL STRIKE, HIGH BRAKE
SAE AS 81934 : 2016 BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING
SAE AS 3506 B: 2014(R2019) INSERT - SCREW THREAD, THIN WALL, SELF-LOCKING UNS N07718, SILVER PLATED, CLASS: 185 KSI/1025 DEGREES F, PROCUREMENT SPECIFICATION
SAE J 2337-3 : 2017 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
SAE AS 81820 : 2014 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION
API 599 : 2013 METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS
MIL-DTL-83723-80 Revision D:2010 Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Solder or Weld Flange Mount, Bayonet Coupling, Solder Pin Contact), (Series III, Classes H, J, L, P and Y)
MS27075 Revision D:2013 NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT
A-A-51150 Revision B:1996 "V" BLOCKS AND CLAMPS, SINGLE "V" GROOVE REVERSIBLE CLAMPING
SAE AS 620 : 2012 HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT
AWWA C207 : 2013 STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM)
ABMA 10A : 2001 : R2008 METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
SAE AMS 2631 : 2017 ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE
SAE MA 614 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC
SAE AS 1946 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC
SAE MA 3374 : 2012 BOLTS AND SCREWS, UNS S66286, CORROSION AND HEAT RESISTANT STEEL, PROCUREMENT SPECIFICATION, METRIC
MIL P 60547 : F PROJECTILE, 105 MM, HE, M1 & M760 METAL PARTS ASSEMBLY
MIL-DTL-60547 Revision G:2008 PROJECTILE, 105 MM, HE, M1 AND M760 - METAL PARTS ASSEMBLY
GGG-P-831 Revision F:1995 PUNCHES; CENTER, DRIVE PIN, ALIGNING, AND PRICK
MIL-DTL-83413 Revision C:2012 CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR
JSSG-2009 Revision A:2013 Air Vehicle Subsystems
MS27231 Revision B:2007 Straight Flange Nipple Assembly, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
MIL-DTL-13931 Revision J:1999 Cannon: General Specification for
MIL-PRF-20042 Revision F:2015 FLANGES, PIPE, BRONZE (SILVER BRAZING)
AN912 Revision 10:2011 BUSHING, PIPE
NASM8846:2011 INSERT, SCREW-THREAD, HELICAL COIL
IPC 6013 GERMAN : B QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE PRINTED BOARDS
API 589 : 1998 FIRE TEST FOR EVALUATION OF VALVE STEM PACKING
MIL-DTL-14852 Revision D:2009 PROJECTILE, 105 MM, ILLUMINATING, M314A3 AND PROJECTILE, 105 MM, INFRARED ILLUMINATING, M1064 METAL PARTS ASSEMBLY
NASM 7838 : 2004 BOLT, INTERNAL WRENCHING, 160 KSI FTU
MS21955 Revision C:2009 BODY, CLUSTER FITTING, TWO-WAY, 180 DEGREES, FLARE
MIL-I-8846 Revision D:1994 INSERT, SCREW THREAD, HELICAL COIL
MIL-C-22520-28 Base Document:1977 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL FOR WIRE BARREL SIZES 20 THROUGH 28
IPC 6012 FRENCH : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS
MIL-P-21143 Revision B:1984 PIN, STRAIGHT, HEADLESS (DOWEL)
MIL-B-7838 Revision C:1989 BOLT, INTERNAL WRENCHING 160 KSI FTU
MIL-W-63150 Base Document:1977 WEAPONS AND SUPPORT MATERIAL STANDARD QUALITY ASSURANCE PROVISIONS FOR
MIL-DTL-28754-94 Revision A:2015 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DIP, 0.4 PITCH, FORMAT C, D AND E
MIL-T-6845 Revision D:1985 TUBING, STEEL, CORROSION-RESISTANT (304) AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION
MIL-W-45595 Revision D:1985 WASHER, RECESSED, SADDLE AND SHOULDERED METAL
MS9483 Revision C:2010 FERRULE, BRAZING, TUBE FITTING - CRES SAE-AMS5646, STRAIGHT
MIL-P-46518 Revision D:1979 PRIMER, ELECTRIC, M73, PARTS FOR
MIL-DTL-3922-53 Revision E:2010 FLANGES, WAVEGUIDE (COVER) (SQUARE, 4 HOLE) (CIRCULAR BACK)
MIL F 52525 : D FITTING, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP HALVES, GENERAL SPECIFICATION FOR
MIL-N-8984 Base Document:1972 NUT, SELF-LOCKING, STEEL, 260 KS1 FTU 450 DEGREES F
MIL-S-3443 Revision G:1993 SHOTGUN, 12 GAGE, RIOT TYPE
DOD-I-63276 Revision A:1983 INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC AND RING LOCK SERRATED METRIC
MIL-DTL-55302 Revision G:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
MIL-R-45906 Revision D:1984 RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK
MS24589 Revision C:2007 Nipple, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1 through 2 Inches Tubing Sizes
MIL P 45952 : 0 PIN,QUICK RELEASE, DETENT GENERAL SPECIFICATION FOR
MIL-P-45971 Base Document:1975 PRODUCT ENGINEERING QUALITY ENGINEERING SYSTEM (PEQES) FOR WEAPONS AND SUPPORT MATERIAL
MIL C 83723/79 : C CONNECTOR, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT), SERIES III, CLASSES H AND Y)
DOD-S-70328 Base Document:1982 SPACER, RING, METRIC GENERAL SPECIFICATION FOR
MIL-C-82722 Base Document:1982 CATAPULT, AIRCRAFT EJECTION SEAT, CKU-5/A REWORK ASSEMBLY
MIL-N-8985 Base Document:1972 NUT, SELF-LOCKING STEEL, 180 KS1 FTU 450 DEGREES F
MS21960 Revision D:2011 Body, Cluster Fitting, Three-Way, Internal Boss
MS24359 Revision B:2016 NOSE, PROBE MAST - TYPE MA-2, FLIGHT PRESSURE REFUELING NOZZLE, OUTLINE DIMENSIONS FOR
MS27625 Revision D:2018 Wire, Retainer
MS27639 Revision B:2009 Disassembly Tool
AN774 Revision 8:2011 BOLT - FLARED TUBE FITTING END UNIVERSAL
MIL-DTL-901 Revision E:2017 Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for
AWS D18.3/D18.3M : 2015 SPECIFICATION FOR WELDING OF TANKS, VESSELS & OTHER EQUIPMENT IN SANITARY (HYGIENIC) APPLICATIONS
MIL-C-24368 Revision B:1987 CONNECTOR ASSEMBLIES, PLUGS AND RECEPTACLES, ELECTRIC POWER TRANSFER, SHORE TO SHIP AND SHIP TO SHIP, GENERAL SPECIFICATION FOR
MS123131 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 1/8 INCH, ALUMINUM
MIL-DTL-22263 Revision C:2009 Coupling Fuel Line, Flexible, 125 PSI General Specification for
MIL-H-21367 Revision E:1985 HULL FITTINGS: CONNECTORS, ADAPTER, END SEALS, AND STUFFING TUBES FOR FLEXIBLE, SOLID-DIELECTRIC, RADIO-FREQUENCY CABLES
MS21025 Revision F:1996 NUT, CASTELLATED, HEXAGON
AN6204 Revision L:2013 Valve, Hydraulic Bleeder
MS27769 Revision B:2011 PLUG, PIPE, COUNTERSUNK HEX HEAD
MIL C 28754 : D CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR
NASM21250:2013 BOLT, TENSION, STEEL, EXTERNAL WRENCHING, FLANGED, 12-POINT, 180 KSI FTU, 450 DEGREES F
A-A-59935-3 Base Document:2013 Conical Seals, Crush, 37 Degree Flared Tube Fitting, Nickel
A-A-59935-1 Base Document:2013 Conical Seals, Crush, 37 Degree Flared Tube Fitting, Aluminum Alloy
MIL P 7034 : D PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT
MIL-DTL-3928-9 Revision E:2011 SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE (COAXIAL) (MANUALLY AND MOTOR OPERATED) CLASS 1 (TYPE N CONNECTORS)
MIL-C-60641 Base Document:1969 CARTRIDGE, DELAY, M174 ASSEMBLY
MIL C 915 : F CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR
MIL-I-24783 Base Document:1993 ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE
A-A-59266 Base Document:1998 Grinding Machine, Universal, Cylindrical, External, Center-Type
MS21959 Revision D:2011 Body,Cluster Fitting, Two-Way, 90 Degrees, Internal Boss
MS33786 Revision B:2013 Fitting, Installation, Flared Tube and Hose, Swivel
MIL C 24643 : A CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR
MIL-DTL-12883 Revision F:2003 Sockets and Accessories for Plug-in Electronic Components, General Specification for
MIL-B-1083 Revision D:1987 BALLS, BEARING, FERROUS AND NON-FERROUS (FOR USE IN BEARINGS, VALVES AND BEARING APPLICATIONS) GENERAL SPECIFICATION FOR
AWS D14.1/D14.1M:2005 SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT
MIL-B-11582 Revision C:1978 BASE PLATE, THEODOLITE: ALUMINUM
AWS D1.2/D1.2M : 2014 STRUCTURAL WELDING CODE - ALUMINUM
MIL-DTL-24694 Revision A:2011 VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS (22 - 500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE, GENERAL SPECIFICATION FOR (METRIC)
MIL-D-46634 Revision B:1990 DELAY ELEMENT, CARTRIDGE: M5 ASSEMBLY
MIL-DTL-22442-32 Revision C:2005 CABLE ASSEMBLY, AIRCRAFT AUDIO, ASSOCIATED PARTS
MIL-H-87111 Revision A:1984 HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR
A-A-59935-2 Base Document:2013 Conical Seals, Crush, 37 Degree Flared Tube Fitting, Copper
SAE AS 7253 : 2015 NUTS, SELF-LOCKING, NICKEL ALLOY, UNS N07001 CLASSIFICATION: 180 KSI/1400 DEGREES F, PROCUREMENT SPECIFICATION
SAE AS 5958 : 2017 FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR
SAE MA 2241 : 2015 COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, METRIC
SAE AS 1975 : 2016 Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems
SAE AS 4266 : 2013 HOLE CONTOUR, FLUID PASSAGE, TUBE FITTING
MIL C 55302 : E CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE
MIL-F-85720 Base Document:1985 FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR
SAE AMS 5896 : 2015 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.55TI (321), SOLUTION HEAT TREATED AND COLD DRAWN, 1/8 HARD TEMPER
SAE AS 7207 : 2012 SPRING PINS, TUBULAR, SLOTTED CORROSION AND MODERATE HEAT RESISTANT STEEL PROCUREMENT SPECIFICATION FOR
SAE AS 7250D : 2013(R2018) NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 DEGREES F USE, UN THREAD FORM
SAE AS 27194C : 2014(S2018) SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315
NFPA 1982 : 2018 Standard on Personal Alert Safety Systems (PASS)
MIL-C-81797 Revision A:1994 COATING, INORGANICALLY BONDED ALUMINUM (ELECTROPHORECTICALLY DEPOSITED)
MIL H 52471 : D HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR
MIL-DTL-27536 Revision C:1995 COUPLING, CLAMP, GROOVED, V-BAND
MIL-DTL-83723 Revision H:2016 CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
MS123137 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 3/4 INCH, ALUMINUM
MS123143 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 2 1/2 INCH, ALUMINUM
MS123141 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 2 1/4 INCH, ALUMINUM
DOD-S-63275 Revision A:1982 STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC AND RING LOCK SERRATED METRIC, GENERAL SPECIFICATION FOR
MIL-P-50569 Revision C:1982 PROJECTILE, 155MM, HE, ROCKET ASSISTED M549 SERIES, MOTOR BODY BONDING ASSEMBLY FOR
SAE AS 4983 : 2012 SPRING, PINS, TUBULAR, COILED CORROSION RESISTANT NICKEL BASE ALLOY PROCUREMENT, SPECIFICATION FOR
SAE MAP 3440 : 2012 O-RING GROOVE DESIGN FOR PACKING PREFORMED, ELASTOMERIC O-RING SEALS, STATIC, RADIAL SQUEEZE, METRIC
SAE MA 1975 : 2015 HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS
SAE AMS 2300 L : 2015 STEEL CLEANLINESS, PREMIUM AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE
SAE AS 4716C: 2017 GLAND DESIGN, O-RING AND OTHER SEALS
SAE AMS 2411 : 2013 PLATING, SILVER FOR HIGH TEMPERATURE APPLICATIONS
SAE MA 2093 : 2012 FITTING END, DIMENSIONS, FLUID SYSTEMS PORT CONNECTION, METRIC
SAE AS 7473 : 2018 BOLTS AND SCREWS, ROLL THREADED PROCUREMENT SPECIFICATION FOR
MIL-L-50794 Base Document:1973 LINEAR SHAPED CHARGE ASSEMBLY
MS27072 Revision F:2013 WIRE, RETAINER
SAE AS 7455 : 2016 BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT HARDENED AND TEMPERED, ROLL THREADED
AWWA C560:2014 CAST-IRON SLIDE GATES
MIL-DTL-81716 Revision A:2009 PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F)
MIL-DTL-83517 Revision B:2015 Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for
MIL-DTL-83723-94 Revision F:2010 CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, BAYONET COUPLING, STRAIGHT PIN CONTACT), (SERIES 3, CLASSES H, AND Y)
SAE AS 5951 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS
SAE AMS 5914 : 2012 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED
SAE AS 4510 : 2013 FITTINGS, WELD, FLUID CONNECTION, 5000 PSI
SAE MA 4360 : 2013 Metric Wrenches: 6 & 12 Point Flare Nut, Non-distorting
SAE AS 1132 : 2016 BOLTS, SCREWS AND NUTS - EXTERNAL WRENCHING UNJ THREAD, INCH - DESIGN STANDARD
SAE AMS 7902 : 2015 BERYLLIUM SHEET AND PLATE, 98BE
SAE ARP 5555 : 2016 RECOMMENDATIONS FOR INSTALLATION OF SEALS IN STANDARD GLANDS
AND10050 Revision 21:2005 BOSSES, STRAIGHT DIMENSIONS FOR GASKET SEAL STRAIGHT THREAD
MIL-DTL-3922-62 Revision D:2010 FLANGES, WAVEGUIDE (CHOKE) (ROUND, 8 HOLE (2 HOLES CENTERED HORIZONTALLY, 2 HOLES CENTERED VERTICALLY))
A-A-59935-6 Base Document:2013 Conical Seals, Crush, 37 Degree Flared Tube Fitting, Serrated
MIL-DTL-83798 Revision D:2008 FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MS123125 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 9/16 INCH, ALUMINUM
MIL-DTL-26518 Revision C:2000 CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR
SAE AS 4959 : 2018 BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 140 KSI 1650 DEGREES F SOLUTION HEAT TREATMENT AGED BEFORE FILLET AND THREAD ROLLING PROCUREMENT SPECIFICATION
SAE ARP 899 : 2013 TUBE FITTINGS, FLUID SYSTEMS, PERMANENT TYPE, GENERAL REQUIREMENTS FOR
DOD-I-63274 Revision A:1983 INSERT, SCREW THREAD THIN WALL, LOCKED IN, METRIC, GENERAL SPECIFICATION FOR
MIL-B-45588 Revision A:1972 BREECH MECHANISM ASSEMBLIES FOR CANNONS, 152 MM GUN-LAUNCHER: M81E1 AND XM162E1
MS27637 Revision C:2009 ELBOW, FLARELESS, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT
MS123136 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 1 5/8 INCH, ALUMINUM
MS123139 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 2 INCH, ALUMINUM
MIL-DTL-3533 Revision C:2009 RUBBER, SYNTHETIC; SHEET, STRIP AND MOLDED
MSS SP 129 : 2014 COPPER-NICKEL SOCKET-WELDING, FITTINGS, AND UNIONS
MIL A 24533 : B ACTUATORS, ROTARY HYDRAULIC RACK AND PINION
MS123142 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 2 3/8 INCH, ALUMINUM
IPC A 600 FRENCH : H ACCEPTABILITY OF PRINTED BOARDS
MIL-DTL-19068 Revision B:2006 VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS
MIL-W-13855 Revision D:1973 WEAPONS, SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR
SAE AS 7471 : 2018 BOLTS AND SCREWS, NICKEL ALLOY, UNS N07001 TENSILE STRENGTH 165 KSI, CORROSION AND HEAT RESISTANT, PROCUREMENT SPECIFICATION
AN915 Revision 14:2015 ELBOW, PIPE, 45 DEGREES
MS123140 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 2 1/8 INCH, ALUMINUM
MIL-B-81819 Revision B:1987 BEARING, PLAIN, (SLIDING SPHERICAL, SLEEVE & THRUST) SELF LUBRICATING, HIGH SPEED OSCILLATION, GENERAL SPECIFICATION FOR
MIL-S-45915 Revision A:1967 STUD, LOCKED IN - KEY LOCKED - GENERAL SPECIFICATION FOR
MIL-STD-320 Revision A:1975 FUSE EXPLOSIVE COMPONENT TERMINOLOGY, DIMENSIONS AND MATERIALS
MIL F 83296 : 0 FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, HIGH PRESSURE (3,000 PSI HYDRAULIC AND PNEUMATIC)
MIL-B-81935 Revision A:1987 BEARING, PLAIN, ROD END, SELF AND ALIGNING, SELF AND LUBRICATING
ASME B16.48 : 2015 LINE BLANKS
SAE AMS 3241 : 2011 CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 55-65
SAE AS 4108 : 2018 T-BOLT AND EYE BOLT, A286 CRES, 1000 DEGREES F FATIGUE RATED
SAE AS 6116 : 2016 ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR
SAE AS 1371 : 2015 NUTS, SELF-LOCKING, CORROSION RESISTANT STEEL, HIGH STRENGTH, PREVAILING TORQUE, ALL METAL, 800 DEGREES F (427 DEGREES C) USE, UNJ THREAD FORM
SAE MA 3375 : 2011 STUDS, CORROSION AND HEAT RESISTANT STEEL, UNS S66286 TENSILE STRENGTH 900 MPA, PROCUREMENT SPECIFICATION, METRIC, FSC 5307
MIL PRF 7891 : F FILLER VALVE, AIRCRAFT OXYGEN
MIL-B-7949 Revision E:1981 BEARING, BALL, AIRFRAME, ANTIFRICTION
MS21954 Revision C:2015 BODY, CLUSTER FITTING, TWO-WAY, 90 DEGREE, FLARE
MS123122 Revision D:2010 PLUG - STRAIGHT THREAD, O-RING SEAL, 3/8 INCH, ALUMINUM
MIL B 85667/12 : 0 BOLT, SLEEVE 100 DEGREE TENSION FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, TITANIUM ALLOY PIN, 95 KSI FSU, 160 KSI FTU
MIL I 45932 : 0 INSERT, SCREW THREAD, THIN WALL, LOCK IN
MS17836 Revision E:1991 Connector, Pneumatic Starter, Duct, Double Ended
SAE AS 1227 : 2013 HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT
MS9198 Revision D:2010 NUT, TUBE COUPLING-CRES SAE-AMS5646
MIL N 45913 : B NUTS, SELF LOCKING, HEXAGON, PREVAILING-TORQUE
API 599 RUSSIAN : 2013 METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS
EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013)
MIL-DTL-12133 Revision E:2015 WASHER, SPRING TENSION, GENERAL SPECIFICATION FOR
MIL-G-5514 Revision G:1993 GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR
ASME BPE : 2016 BIOPROCESSING EQUIPMENT
MIL-F-14847 Revision B:1975 FUSE, MTSQ, M564 ASSEMBLY LESS BOOSTER PELLET AND CLOSING CUP (LEAD) CHARGE
MIL-PRF-24453 Revision B:2008 INHIBITOR, CORROSION, SOLUBLE OIL
SAE MA 3377 : 2018 BOLTS AND SCREWS, NICKEL ALLOY UNS N07718, TENSILE STRENGTH 1275 MPA PROCUREMENT SPECIFICATION, METRIC
SAE AMS 2643 : 2012 STRUCTURAL EXAMINATION OF TITANIUM ALLOYS, CHEMICAL ETCH INSPECTION PROCEDURE
SAE AS 45909 : 2015 STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR
MIL C 3655 : C CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL [COAXIAL SERIES TWIN] AND ASSOCIATED FITTINGS, GENERAL SPECIFICATION FOR
MS124731THRUMS124770 Revision D:1976 INSERT, CRES HELICAL COIL FINE THREAD, 2 DIA NOMINAL LENGTH
MIL C 28748 : B CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR
SAE AS 4877 : 2017 BOLTS AND SCREWS, NICKEL ALLOY UNS N07718, CLASSIFICATION: 185 KSI/1200 DEGREES F, PROCUREMENT SPECIFICATION
MIL I 50362 : A INITIATOR, CARTRIDGE ACTUATED M8, METAL PARTS ASSEMBLY
MIL-N-7873 Revision B:1994 NUT, SELF-LOCKING 1,200 DEG F
MIL-T-60668 Base Document:1968 THRUSTER, CARTRIDGE ACTUATED, M18 REMANUFACTURED METAL PARTS ASSEMBLY
MIL-B-8952 Revision B:1995 BEARING, ROLLER, ROD END, ANTIFRICTION, SELF-ALIGNING
SAE AS 4958 : 2013 PERFORMANCE, NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNJ 16 PITCH THREAD FORM
MS9194 Revision C:2010 Elbow, Tube - SAE-AMS5646, Boss, 90 Degrees
MIL-DTL-24044 Revision C:2013 FLANGES, COAXIAL LINE, RIGID, AIR DIELECTRIC, GENERAL SPECIFICATION FOR
MIL L 24560 : 0 LIGHTS AND GLASSWARE FOR NAVIGATION, SIGNAL AND WARNING, NAVAL SHIPBOARD USE, GENERAL SPECIFICATION FOR
MIL-N-85615-8 Base Document:1989 NUT, SELF-SEALING, SELF-LOCKING, ALLOY STEEL, 125 KSI FTU, 250 DEGREES F & 450 DEGREES F
MIL-PRF-62410 Revision B:2011 TUBE ASSEMBLY METAL: SWAGED HYDRAULIC, (M1 TANK)
MIL-F-48625 Revision A:1992 FUSE, 25MM, POINT DETONATING, SELF-DESTRUCT M758
MIL-F-50694 Base Document:1970 FIRING MECHANISM, CARTRIDGE ACTUATED 29378-1 REMANUFACTURED METAL PARTS ASSEMBLY
API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
MIL-DTL-32183 Base Document:2004 CATAPULT, AIRCRAFT EJECTION SEAT: CKU-5C/A REWORK ASSEMBLY
MIL-T-60669 Base Document:1968 THRUSTER, CARTRIDGE ACTUATED, M19 REMANUFACTURED METAL PARTS ASSEMBLY
MIL-PRF-49142 Revision B:2004 CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
IPC 6018 CHINESE : B QUALIFICATION AND PERFORMANCE SPECIFICATION FOR HIGH FREQUENCY (MICROWAVE) PRINTED BOARD
MIL-DTL-71172 Revision B:2005 CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM
NASM21076 : 2003 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEGREES F AND 800 DEGREES F
GGG-B-500 Revision D:2015 BLOCK, TACKLE (WIRE ROPE)
MIL A 83366 : 0 ANTENNA ASSEMBLIES, AIRBORNE, GENERAL SPECIFICATION FOR
MIL-DTL-16377 Revision J:2014 Fixtures, Lighting; and Associated Parts; Shipboard Use, General Specification for
GGG-W-641 Revision E:1975 WRENCH, SOCKET; (AND SOCKETS, HANDLES, AND ATTACHMENTS FOR SOCKET WRENCHES: HAND)
AWS B4.0M : 2000 STANDARD METHODS FOR MECHANICAL TESTING OF WELDS
MS33740 Revision C:1999 NIPPLE, PNEUMATIC STARTING, 3 INCH ID
MS28755 Revision E:2012 FITTING END, SELF-SEALING FUEL HOSE, SWIVEL, DETACHABLE, FLANGED, 90 DEGREES
MIL C 83733 : C CONNECTOR, ELECTRICAL, MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
MIL-S-43012 Revision C:1988 SAMPLER, SOIL
MS27283 Revision C:2013 Contact, Electrical-Plug Connector, Ramp Power, 416/240 Volts, Large, Female
MIL-DTL-26482 Revision H:2007 Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for
AN 839 : 0009 ELBOW, TUBE TO HOSE, 45 DEGREES
MIL S 15743 : C SWITCH, ROTARY, ENCLOSED
ASTM D 2442 : 1975 : R1996 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
ASTM A 1091/A1091M : 2016 : EDT 1 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
ASTM A 270/A270M : 2015 : REDLINE Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM D 6132 : 2013 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM E 585/E585M : 2012-06 SPECIFICATION FOR COMPACTED MINERAL-INSULATED, METAL-SHEATHED, BASE METAL THERMOCOUPLE CABLE
ASTM E 235/E235M : 2012 Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
ASTM F 3056 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM F 2431 : 2004 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
ASTM D 3835 : 2016 : REDLINE Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM E 618 : 2007 Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
ASTM F 1357 : 2014 : REDLINE Standard Specification for Articulating Total Wrist Implants
ASTM D 6891 : 2015 : REDLINE Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
ASTM D 2442 : 1975 : R2007 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
ASTM F 2924 : 2014 : REDLINE Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
ASTM D 2658 : 2004 : R2009 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
ASTM B 451 : 1993 Specification for Copper Foil, Strip, and Sheet for Printed Circuits and Carrier Tapes (Withdrawn 1998)
ASTM F 2163 : 2001 : R2008 Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
ASTM B 811 : 2013 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
IEC 63004:2015 Standard for receiver fixture interface
FM 3615 : 2018 EXPLOSIONPROOF ELECTRICAL EQUIPMENT GENERAL REQUIREMENTS
ASTM F 657 : 1992 : R1999 Standard Test Method for Measuring Warp and Total Thickness Variation on Silicon Wafers by Noncontact Scanning (Withdrawn 2003)
MS27622 Revision C:2018 Socket, Hose Coupling
ASTM A 503/A503M : 2015 : REDLINE Standard Specification for Ultrasonic Examination of Forged Crankshafts
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
BS IEC 63004:2015 Standard for receiver fixture interface
BS EN ISO 25178-2:2012 Geometrical product specifications (GPS). Surface texture. Areal Terms, definitions and surface texture parameters
ASTM F 2033 : 2012 : REDLINE Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
NSF 14159-2 : 2014 HYGIENE REQUIREMENTS FOR THE DESIGN OF HAND HELD TOOLS USED IN MEAT AND POULTRY PROCESSING
ASTM F 2163 : 2001 : EDT 1 Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
MIL-DTL-39000 Revision C:2013 Flanges, Waveguide, Ridge, General Specification for
ASTM F 2163 : 2001 : R2016 Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
AASHTO M 251 : 2006 SPECIFICATION FOR PLAIN AND LAMINATED ELASTOMERIC BRIDGE BEARINGS
ASTM F 2511 : 2005 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
ASTM C 1793 : 2015 Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
ASTM A 452 : 1988 Specification for Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service (Withdrawn 1995)
ASTM C 752 : 2013 : R2016 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
ASTM F 2935 : 2012 Standard Specification for Chocks, Panama, Mooring Cast Steel
AASHTO PP 76 : 2013 PRACTICE FOR TROUBLESHOOTING ASPHALT SPECIMEN VOLUMETRIC DIFFERENCES BETWEEN SUPERPAVE GYRATORY COMPACTORS (SGCS) USED IN THE DESIGN AND THE FIELD MANAGEMENT OF SUPERPAVE MIXTURES
DIN EN ISO 25178-2:2012-09 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
DIN EN ISO 25178-603:2014-02 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013)
SAE AMS4958E : 2017 TITANIUM ALLOY BARS AND RODS, 3AL - 8V - 6CR - 4MO - 4ZR, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND CENTERLESS GROUND OR PEELED AND POLISHED
SBAC TS 128 : 6 'ALL-METAL' SELF-LOCKING NUTS (UNJ THREADS) 1100 MPA (160,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT ROOM TEMPERATURE
ASTM D 2442 : 1975 : R2001 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
ASTM D 5379/D5379M : 2012 : REDLINE Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
NSF 14159-3 : 2010 HYGIENE REQUIREMENTS FOR THE DESIGN OF MECHANICAL BELT CONVEYORS USED IN MEAT AND POULTRY PROCESSING EQUIPMENT
SBAC TS 220 : 1 TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C
BS EN 4176:2005 Aerospace series. Lockbolts, 100° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy 2024. Metric series. Technical specification
ASTM C 1624 : 2005 : R2015 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM D 3115 : 1995 : R2005 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM F 2162 : 2001 : R2016 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
ASTM F 2246 : 2006 : EDT 1 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
ASTM F 2443 : 2004 Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End
ASTM E 1685 : 2013 : REDLINE Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
ASTM G 121 : 1998 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM F 2111 : 2001 : REV A : R2017 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 118 : 2002 : R2015 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases (Withdrawn 2016)
ASTM B 736 : 2000 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
ASTM C 1624 : 2005 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM G 121 : 1998 : R2010 : EDT 1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM D 2658 : 2004 : R2013 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
ISO 25178-603:2013 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
ASTM F 2111 : 2001 : REV A : R2005 : EDT 1 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM D 3115 : 1995 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
CSA HPIT 1 : 2015 COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS
ASTM G 122 : 1996 : R2008 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
CSA C22.2 No. 145 : 2011 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
ASTM F 2162 : 2001 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
ASTM F 3055 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM F 1387 : 1999 : R2012 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM B 736 : 2000 : R2006 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock (Withdrawn 2015)
ASTM E 1235 : 2012 : REDLINE Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM F 936 : 1985 : R1991 Specification for Chocks, Panama, Mooring Cast Steel (Withdrawn 1997)
SAE MA 1573 : 2016 NUT, SELF-LOCKING, STEEL, CLASS 1100 MPA/235 DEGREES C, MJ THREAD PROCUREMENT SPECIFICATION FOR, METRIC
ASME Y14.5 : 2009 DIMENSIONING AND TOLERANCING
MIL-DTL-83723-93 Revision D:2010 Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Solder or Weld Flange Mount, Bayonet Coupling, Straight Pin Contact),(Series III, Classes H and Y)
ISO/TR 22335:2007 Surface chemical analysis Depth profiling Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer
ASTM D 2658 : 2004 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
ASTM F 3056 : 2014 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM F 2511 : 2005 : EDT 1 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
ASTM F 2111 : 2001 : REV A : R2011 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM F 1801 : 1997 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
ASTM D 3115 : 1995 : R2009 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D 2442 : 1975 : R2016 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
ASTM F 2246 : 2006 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
ASTM F 915 : 1985 Specification for Bitts, Ship Mooring, Cast Steel (Double Barrel) (Withdrawn 1995)
ASTM F 2431 : 2004 : R2018 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
ASTM C 752 : 2013 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
ASTM G 121 : 1998 : R2015 : EDT 1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G 118 : 2002 : R2007 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases
ASTM C 617/C617M : 2015 : REDLINE Standard Practice for Capping Cylindrical Concrete Specimens
BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
ASTM F 1801 : 1997 : R2004 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
ASTM D 7078/D7078M : 2012 : REDLINE Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
CSA Z245-12 : 2017 STEEL FLANGES
ASTM F 2083 : 2012 : REDLINE Standard Specification for Knee Replacement Prosthesis
MIL-B-18558 Revision B:1988 Bearing, Propulsion Line Shaft, Oil Disc Lubricated
ASTM F 1801 : 1997 : R2009 : EDT 1 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
ASTM F 2590 : 2006 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
ASTM A 660/A660M : 2011 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
CSA HPIT 1:15 (R2020) Compressed hydrogen powered industrial truck on-board fuel storage and handling components
AISC 303 : 0 CODE OF STANDARD PRACTICE FOR STRUCTURAL STEEL BUILDINGS AND BRIDGES
ASTM F 3226/F3226M : 2016 : EDT 1 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
ASTM A 660 : 1996 : R2005 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
ASTM F 2665 : 2009 : R2014 Standard Specification for Total Ankle Replacement Prosthesis
ASTM F 1106 : 1987 : R1998 Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)
ASTM D 7264/D7264M : 2015 : REDLINE Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
MIL-DTL-83723-88 Revision E:2010 Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Flange Mount, Threaded Coupling, Solder Pin Contact), (Series III, Classes H, J, L, N, P and Y)
BS 7011-2.2:1998 Consumable accessories for light microscopes. Slides Specification for materials and quality of finish
VDI 2840:2005-11 Carbon films - Basic knowledge, coating types and properties
SAE AMS 2438 : 2015 PLATING, CHROMIUM, THIN, HARD, DENSE DEPOSIT
ASTM E 235/E235M : 2012 : R2018 Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
ASTM D 3115 : 1995 : R2014 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear (Withdrawn 2019)
ASME B89.1.6 : 2002 : R2012 MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES
ASTM D 2442 : 1975 : R2012 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
ASTM E 74 : 2013 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E 1234 : 2012 : REDLINE Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
ASTM F 2665 : 2009 Standard Specification for Total Ankle Replacement Prosthesis
ASTM C 1624 : 2005 : R2010 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM G 121 : 1998 : R2004 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
BS EN ISO 15136-1:2001 Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps
ASTM F 1387 : 1999 : R2005 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
MIL-DTL-83723-81 Revision F:2010 Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Single Hole Mount, Bayonet Coupling, Solder Pin Contact), (Series III, Classes H, J, L, P and Y)
NSF 14159-1 : 2014 HYGIENE REQUIREMENTS FOR THE DESIGN OF MEAT AND POULTRY PROCESSING EQUIPMENT
PD ISO/TR 22335:2007 Surface chemical analysis. Depth profiling. Measurement of sputtering rate. Mesh-replica method using a mechanical stylus profilometer
ASME PV CODE 8 DIV 3 : 2017 BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS
ASTM B 811 : 2013 : EDT 1 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
ASME PCC 1 : 2013 GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY
ASTM G 118 : 2002 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases
ASTM C 1783 : 2015 Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
CSA C22.2 No. 145 : 2011 : INC : UPD 1 : 2017 : R201500 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
ASTM F 2246 : 2006 : R2013 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
ASTM D 6132 : 2013 : R2017 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM F 1387 : 1999 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM E 839 : 2011 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
ASTM F 3055 : 2014 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM F 2590 : 2006 : R2013 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
ASTM G 122 : 1996 : R2002 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM F 2111 : 2001 : REV A Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM F 2887 : 2017 : REDLINE Standard Specification for Total Elbow Prostheses
CSA C22.2 No. 145 : 2011 : R2015 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
ISO 18139:2017 Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements
MIL-DTL-50700 Revision A:2005 Initiator, Propellant Actuated, JAU-2/A25
ASTM F 1106 : 1987 : R2006 Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)
ASTM F 3226/F3226M : 2016 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
AASHTO PP 76 : 2013 : R2015 PRACTICE FOR TROUBLESHOOTING ASPHALT SPECIMEN VOLUMETRIC DIFFERENCES BETWEEN SUPERPAVE GYRATORY COMPACTORS (SGCS) USED IN THE DESIGN AND THE FIELD MANAGEMENT OF SUPERPAVE MIXTURES
AASHTO T 312 : 2015 METHOD OF TEST FOR PREPARING AND DETERMINING THE DENSITY OF ASPHALT MIXTURE SPECIMENS BY MEANS OF THE SUPERPAVE GYRATORY COMPACTOR
ASME B31.3:2016 PROCESS PIPING
ISO 15136-1:2009 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps
ASTM A 578/A578M : 2017 : REDLINE Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
ASTM G 122 : 1996 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
BS ISO 18139:2017 Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements
ASTM F 2215 : 2015 : REDLINE Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
ASTM F 2431 : 2004 : R2012 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
ASTM F 2162 : 2001 : EDT 1 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
ASTM D 6925 : 2015 : REDLINE Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM F 2163 : 2001 Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
ASTM F 2332 : 2006 : R2013 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
ASTM A 660 : 1996 : R2010 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
ASTM B 811 : 2013 : R2017 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
ASTM F 2162 : 2001 : R2008 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
ASTM A 660 : 1996 : R2001 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
ASTM D 7127 : 2017 : REDLINE Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASME B89.1.6 : 2002 : R2007 MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES
NEMA PR 4 : 83(R1989) PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE FOR INDUSTRIAL USE
ANSI/NEMA FB 11-2000 PLUGS, RECEPTACLES AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS
ASTM D 3115 : 1995 : R2000 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D 3410/D3410M : 2016 : REDLINE Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM E 2181/E2181M : 2011 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
ASTM E 618 : 2007 : R2013 Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
ASTM G 122 : 1996 : R2015 : EDT 1 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM F 937 : 1985 : R1991 Specification for Chocks, Ship Mooring Cast Steel (Withdrawn 1997)
AASHTO LRFDLTS 1 : 1900 LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS
ASTM F 3318 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ASTM A 1091/A1091M : 2016 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
ASTM D 3966/D3966M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Lateral Load
ASTM F 2511 : 2005 : R2013 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
ASTM F 2936 : 2012 Standard Specification for Chocks, Ship Mooring, Cast Steel
ASTM F 2162 : 2001 : EDT 2 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
ASTM E 74 : 2013 : REV A Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E 2821 : 2013 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers
ASTM F 2590 : 2006 : EDT 1 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
ASTM A 660 : 1996 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
ASTM B 372 : 2017 : REDLINE Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
ASTM F 2332 : 2006 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
ASTM F 1801 : 1997 : R2014 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
ASTM F 2111 : 2001 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM E 839 : 2011 : R2016 : EDT 1 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
ASTM F 2443 : 2004 : R2012 Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
ASTM A 660/A660M : 2011 : R2016 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
ASTM E 1235M : 1995 Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft [Metric] (Withdrawn 2000)
ASTM F 1106 : 1987 : R2012 Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)
ASTM D 1238 : 2013 : REDLINE Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASME B89.1.6 : 2002 MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES
SAE AS 955 : 2012 METRIC SOCKETS, WRENCHES, HAND TWELVE POINT, HIGH STRENGTH, THIN WALL
PREN 4176 : 200P1 AEROSPACE SERIES - LOCKBOLTS, 100 DEGREE COUNTERSUNK NORMAL HEAD OR PROTRUDING HEAD, TENSION- / SHEARTYPE, CLOSE TOLERANCE, IN TITANIUM ALLOY TI-P64001, ANODIZED OR WITH ALUMINIUM PIGMENTED COATING - COLLARS IN TITANIUM TI-P99002 OR ALUMINIUM ALLOY 2024 - METRIC SERIES - TECHNICAL SPECIFICATION
ASME B89.1.6M : 84(R1997) MEASUREMENT OF QUALIFIED PLAIN INTERNAL DIAMETERS FOR USE AS MASTER RINGS AND RING GAGES
ASME B18.8.100M:2000 SPRING PINS: COILED TYPE, SPRING PINS: SLOTTED, MACHINE DOWEL PINS: HARDENED GROUND, AND GROOVED PINS (METRIC SERIES)
ASME B18.29.1 : 2010 : R2017 Helical Coil Screw Thread Inserts--Free Running and Screw Locking (Inch Series) (B18.29.1 - 2010)
ASME Y14.36M : 1996 (R2008) SURFACE TEXTURE SYMBOLS
ASME B40.200:2008(R2013) Thermometers, Direct Reading and Remote Reading <br>
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
ASME Y14.5.1M : 1994 : R2012 MATHEMATICAL DEFINITION OF DIMENSIONING AND TOLERANCING PRINCIPLES
ASME B1.16M : 1984 : R2016 GAGES AND GAGING FOR METRIC M SCREW THREADS
ASME B89.1.13 : 2013 Micrometers
ASME B18.8.200M : 2000 COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES)
ASME B18.29.1 : 2010 HELICAL COIL SCREW THREAD INSERTS - FREE RUNNING AND SCREW LOCKING (INCH SERIES)
ASME Y14.46 : 2017 PRODUCT DEFINITION FOR ADDITIVE MANUFACTURING
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ASME B1.22M : 1985 : R2006 GAGES AND GAGING FOR MJ SERIES METRIC SCREW THREADS
ASME B1.22M : 1985 : R2016 GAGES AND GAGING FOR MJ SERIES METRIC SCREW THREADS
ASME B1.16M : 1984 : R2001 GAGES AND GAGING FOR METRIC M SCREW THREADS
ASME Y14.5.1M : 1994 MATHEMATICAL DEFINITION OF DIMENSIONING AND TOLERANCING PRINCIPLES
ASME B107.500 : 2010 PLIERS
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASME B1.3 : 2007 : R2012 SCREW THREAD GAGING SYSTEMS FOR ACCEPTABILITY: INCH AND METRIC SCREW THREADS (UN, UNR, UNJ, M, AND MJ)
ASME B1.2 : 1983 : R2017 GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS
ASME B1.3 : 2007 SCREW THREAD GAGING SYSTEMS FOR ACCEPTABILITY: INCH AND METRIC SCREW THREADS (UN, UNR, UNJ, M, AND MJ)
ASME Y14.100 : 2017 ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
API 609 REDLINE : 2009 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
ASME B1.2 : 1983 : R2007 GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS
AISC 360 : 2016 SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
ASME Y14.5M : 1994 : R2004 DIMENSIONING AND TOLERANCING
API MPM CH14.3.1 : 2012:R2017 ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES
ASME Y14.5M:1994 DIMENSIONING AND TOLERANCING
API MPM CH14.3.1 : 2012 : INC : ERR 1 : 2013 ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES
ASME B89.1.5 : 1998 : R2014 MEASUREMENT OF PLAIN EXTERNAL DIAMETERS FOR USE AS MASTER DISCS OR CYLINDRICAL PLUG GAGES
ASME Y14.36M : 1996 SURFACE TEXTURE SYMBOLS
ASME B1.2 : 1983 : R2001 GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS
IPC 6013 CHINESE : B QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE PRINTED BOARDS
ASTM F 3184 : 2016 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
ASME B18.29.2M:2005 HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES)
ASME B18.29.2M : 2005 : R2017 HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES)
ASME B89.1.5 : 1998 : R2004 MEASUREMENT OF PLAIN EXTERNAL DIAMETERS FOR USE AS MASTER DISCS OR CYLINDRICAL PLUG GAGES
ASME B1.22M : 1985 : R2001 GAGES AND GAGING FOR MJ SERIES METRIC SCREW THREADS
ASME B18.8.100M : 2000 : R2005 SPRING PINS: COILED TYPE, SPRING PINS: SLOTTED, MACHINE DOWEL PINS: HARDENED GROUND, AND GROOVED PINS (METRIC SERIES)
ASME B18.8.200M : 2000 : R2010 COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES)
ASME Y14.5.1M : 1994 : R2004 MATHEMATICAL DEFINITION OF DIMENSIONING AND TOLERANCING PRINCIPLES
ASME B40.200 : 2008 THERMOMETERS, DIRECT READING AND REMOTE READING
ASME Y14.43 : 2011 DIMENSIONING AND TOLERANCING PRINCIPLES FOR GAGES AND FIXTURES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
ASME B1.22M : 1985 : R2011 GAGES AND GAGING FOR MJ SERIES METRIC SCREW THREADS
ASME B31.3 SPANISH : 2010 PROCESS PIPING
ASME B18.3 : 2012 SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES)
ASME B107.110 : 2012 SOCKET WRENCHES, HANDLES, AND ATTACHMENTS
API MPM CH14.3.1:2012 ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
ASME B1.3 : 2007 : R2017 SCREW THREAD GAGING SYSTEMS FOR ACCEPTABILITY: INCH AND METRIC SCREW THREADS (UN, UNR, UNJ, M, AND MJ)
ASME Y14.36M : 1996 : R2002 SURFACE TEXTURE SYMBOLS
ASME B18.8.200M : 2000 : R2005 COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES)
ASME B18.8.100M : 2000 : R2010 SPRING PINS: COILED TYPE, SPRING PINS: SLOTTED, MACHINE DOWEL PINS: HARDENED GROUND, AND GROOVED PINS (METRIC SERIES)
ASME B1.16M : 1984 : R2011 GAGES AND GAGING FOR METRIC M SCREW THREADS
ASME B1.16M : 1984 : R2006 GAGES AND GAGING FOR METRIC M SCREW THREADS

ARPM OS 1-1 : 2017 OIL SEAL TECHNICAL BULLETIN - SHAFT REQUIREMENTS FOR ROTARY LIP SEALS
ISO/IEC Guide 98:1993 Guide to the expression of uncertainty in measurement (GUM)
SAE J 111 : 1997 SEALS - TERMINOLOGY OF RADIAL LIP
ISO 2632-1:1975 Roughness comparison specimens Part 1: Turned, ground, bored, milled, shaped and planed
ANSI B211.1 : 1986 SURFACE INTEGRITY
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
ISO 3274:1996 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ISO 5436-1:2000 Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures
ISO/TS 16610-30:2009 Geometrical product specifications (GPS) Filtration Part 30: Robust profile filters: Basic concepts
ASTM F 2033 : 2012 : REDLINE Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials

View more information
£168.17
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.