• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM B 209 : 2014 : REDLINE

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

Available format(s)

PDF

Superseded date

01-07-2021

Language(s)

English

Published date

01-11-2014

CONTAINED IN VOL. 02.02, 2015 Specifies the aluminum and aluminum-alloy flat sheet, coiled sheet, and plate in the alloys and tempers.

1.1This specification2 covers aluminum and aluminum-alloy flat sheet, coiled sheet, and plate in the alloys (Note 1) and tempers shown in Tables 2 and 3, and in the following finishes:

(A)Limits are in weight percent maximum unless shown as a range or stated otherwise.
(B)Analysis shall be made for the elements for which limits are shown in this table.
(C)For purposes of determining conformance to these limits, an observed value or a calculated value attained from analysis shall be rounded to the nearest unit in the last righthand place of figures used in expressing the specified limit, in accordance with the Rounding Method of Practice E29.
(D)Others includes listed elements for which no specific limit is shown as well as unlisted metallic elements. The producer may analyze samples for trace elements not specified in the specification. However, such analysis is not required and may not cover all metallic Others elements. Should any analysis by the producer or the purchaser establish that an Others element exceeds the limit of Each or that the aggregate of several Others elements exceeds the limit of Total, the material shall be considered nonconforming. The Total for Other Elements does not include elements shown in the footnotes with specific composition limits.
(E) Other Elements—Total shall be the sum of unspecified metallic elements, 0.010 % or more, rounded to the second decimal before determining the sum.
(F)Vanadium 0.05 max.
(G)The aluminum content shall be calculated by subtracting from 100.00 % the sum of all metallic elements present in amounts of 0.010 % or more each, rounded to the second decimal before determining the sum.
(H)Composition of cladding alloy as applied during the course of manufacture. Samples from finished sheet or plate shall not be required to conform to these limits.
(I)Vanadium 0.05–0.15, zirconium 0.10–0.25.
(J)0.05–0.25 Zr
(K)Gallium 0.03 max, vanadium 0.05 max.
(L)0.10–0.6 Mn + Cr.
(M)In case there is a discrepancy in the values listed in Table 2 with those listed in the “International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys” (known as the “Teal Sheets”), the composition limits registered with the Aluminum Association and published in the “Teal Sheets” shall be considered the controlling composition. The “Teal Sheets” are available at http://www.aluminum.org/tealsheets.
(A)To determine conformance to this specification each value for tensile strength and yield strength shall be rounded to the nearest 0.1 ksi and each value for elongation to the nearest 0.5 %, both in accordance with the Rounding Method of Practice E29.
(B)The basis for establishment of mechanical property limits is shown in Annex A1.
(C)Material in either of these tempers (H32 or H22), (H34 or H24), (H36 or H26), (H38 or H28), (H12 or H22), (H14 or H24), (H16 or H26), (H18 or H28), may be supplied at the option of the supplier, unless one is specifically excluded by the contract or purchase order. When ordered as H2x tempers, the maximum tensile strength and minimum yield strength do not apply. When H2x tempers are supplied instead of ordered H1x or H3x tempers, the supplied H2x temper material shall meet the respective H1x or H3x temper tensile property limits.
(D)Tests of F temper plate for tensile properties are not required.
(E)The tension test specimen from plate 0.500 in. and thicker is machined from the core and does not include the cladding alloy.
(F)This material is subject to some recrystallization and an attendant loss of brightness.
(A)To determine conformance to this specification, each value for tensile strength and yield strength shall be rounded to the nearest 0.1 ksi and each value for elongation to the nearest 0.5 %, both in accordance with the Rounding Method of Practice E29.
(B)The basis for establishment of mechanical property limits is shown in Annex A1.
(C)Long transverse unless otherwise noted.
(D)Coiled sheet.
(E)Material in the T42, T62, and T72 tempers is not available from the material producer.
(F)For stress-relieved tempers (T351, T451, T651, T7351, T7651, and T851), characteristics and properties other than those specified may differ somewhat from the corresponding characteristics and properties of material in the basic temper.
(G)Test for tensile properties in the F temper are not required.
(H)The tension test specimen from plate 0.500 in. and thicker is machined from the core and does not include the cladding.
(I)Applicable to flat sheet and plate only.
(J)The T72 temper is applicable only to Alloys 2024 and Alclad 2024 sheet solution heat treated and artificially overaged by the user to develop increased resistance to stress-corrosion cracking.
(K)Short transverse tensile property limits are not applicable to material less than 1.500 in. in thickness.
(L)Use of Alloys 2219 and Alclad 2219 in the T31, T351, and T37 tempers for finished products is not recommended.
(M)The properties for this thickness apply only to the T651 temper.

1.1.1Plate in all alloys and sheet in heat-treatable alloys: mill finish.

1.1.2Sheet in nonheat-treatable alloys: mill finish, one-side bright mill finish, standard one-side bright finish, and standard two-sides bright finish.

1.2Alloy and temper designations are in accordance with ANSI H35.1/H35.1(M). The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.

Note 1:Throughout this specification, use of the term alloy in the general sense includes aluminum as well as aluminum alloy.

Note 2:See Specification B632/B632M for tread plate.

Note 3:See Specification B928/B928M for 5xxx-H116 and 5xxx-H321 aluminum alloys containing 3 % or more nominal magnesium and intended for marine service and similar environments. Other alloy-temper products listed in this specification, which do not require the additional corrosion testing/capability called out in ASTM B928/B928M, may be suitable for marine and similar environment applications.

1.3For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

1.4This specification is the inch-pound companion to Specification B209M; therefore, no SI equivalents are presented in the specification.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
B 07
DevelopmentNote
Supersedes ASTM B 25, ASTM B 79, ASTM B 109, ASTM B 126 and ASTM B 178 (01/2002) Supersedes MIL A 52174 (05/2004) Supersedes QQ A 250 (F), /21 (B), /27 (A), /28 (A), /29 (A), /22 (A), /23 (A), /24 (B), /25 (A), /26 (A), /30 (A), /1 (F), /2 (E), /3 (F), /4 (E), /5 (F), /6 (G), /7 (E), /8 (F), /10 (E), /11 (F), /12 (F), /13 (E), /14 (E), /15 (E), /16 (C), /17 (E), /18 (F) and /9 (F). Supersedes AMS QQ A 250/19, AMS QQ A 250/20, AMS 4008, AMS QQ A 250/7, AMS 4003, AMS QQ A 250/1, AMS QQ A 250/2, AMS QQ A 250/26, AMS 4001, AMS 4006, AMS QQ A 250/11, AMS QQ A 250/10, AMS QQ A 250/6 and AMS QQ A 250/9. (03/2012)
DocumentType
Redline
Pages
28
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
UNE 38119:2004 Identical

MIL-DTL-15514 Revision G:2016 Telephone Equipment, Sound Powered Telephone Handset, Headset-Chest Set, and Headset - Chest Set, Noise Attenuating
MIL-DTL-43719 Revision D:2009 MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED; GENERAL SPECIFICATION FOR
MIL I 24728 : A INTERCONNECTION BOX, FIBER OPTIC, METRIC, GENERAL SPECIFICATION FOR
MIL-G-3111 Revision C:1961 GENERATOR, ELECTRIC DIRECT CURRENT NAVAL SHIPBOARD USE
DSCC 85136 : E HEAT SINKS, ELECTRICAL-ELECTRONIC COMPONENT, FIN STOCK, ALUMINIUM ALLOY
ASTM B 557 : 2015 : REDLINE Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
MIL-A-24741 Base Document:1990 ASSEMBLIES, METAL ELECTRICAL BACKPLANE, ONE AND TWO LAYER, GENERAL SPECIFICATION FOR
MIL-DTL-23971 Revision E:2017 POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL-PRF-46002 Revision D:2010 PRESERVATIVE OIL, CONTACT AND VOLATILE CORROSION-INHIBITED
MIL-PRF-81329 Revision E:2015 LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737
MIL-I-17244 Revision E:1971 INDICATOR, TEMPERATURE, DIRECT-READING, BIMETALLIC, (3 AND 5 INCH DIAL)
MIL-PRF-24763 Revision B:2009 ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE
MIL-DTL-24487 Revision B:2005 TILE, RUBBER VIBRATION DAMPING, TYPE 5
ASTM F 782 : 2001 : R2012 Standard Specification for Doors, Furniture, Marine
ASTM D 3115 : 1995 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM F 992 : 2017 : REDLINE Standard Specification for Valve Label Plates
MIL-H-18158 Revision E:1990 HOSE ASSEMBLY, AIR DUCT, LOW PRESSURE, FABRIC, WIRE STIFFENED, RETRACTABLE, NAVAL SHIPBOARD PORTABLE VENTILATING SET USE
MIL STD 248 : D WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION
MIL-PRF-32359 Base Document:2012 CLEANER, GENERAL, FOR GROUND VEHICLES AND GROUND SUPPORT EQUIPMENT, HAP-FREE
MIL C 14055 : E CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER
GG-R-550 Revision B:1981 ROD, STADIA, FOLDING, WITH CASE
MIL F 0051068 : E FILTER, PARTICULATE, HIGH-EFFICIENCY, FIRE RESISTANT
MIL-PRF-32518 Base Document:2015 INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS
MIL-DTL-28748-15 Base Document:2004 CONNECTORS, ELECTRICAL, HEXAGONAL, RACK AND PANEL, MINIATURE, PLUG-RECEPTACLE, FEMALE SOLDER CUP OR PRINTED WIRING BOARD SOCKET CONTACTS, SIZE 20
ASTM F 1348/F1348M : 1991 : R2007 Standard Specification for Pneumatic Rotary Descaling Machines
MIL-T-24103 Base Document:1964 THERMOMETER, SELF INDICATING, 5 INCH SCALE SIZE, LIQUID IN GLASS, MERCURY
ASTM D 2557 : 1998 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55&#176C (-450 to -67&#176F)
MIL-DTL-81963 Revision C:2011 SERVOCOMPONENTS, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR
MIL-DTL-39030 Revision F:2014 DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
MIL-PRF-87978 Revision A:1996 REMOVER, PAINT, EPOXY AND POLYURETHANE SYSTEMS, TANK TYPE, AMBIENT TEMPERATURE, FOR AIRCRAFT WHEELS AND LANDING GEAR COMPONENTS
MIL-C-22230 Revision B:1987 CLEANING COMPOUND, FUEL TANK AND BILGE
MIL-PRF-32177 Revision A:2012 CLEANING COMPOUND, NONSKID
ASTM C 1729 : 2017 : REDLINE Standard Specification for Aluminum Jacketing for Insulation
ASTM D 6412/D6412M:1999 Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
DSCC 84191 : K EXTRACTOR, ELECTRICAL CARD, METAL
ICC IBC INTERNATIONAL BUILDING CODE : 2015 INTERNATIONAL BUILDING CODE
ASTM D 3658 : 2001 : R2008 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
BS EN ISO 4126-2:2003 Safety devices for protection against excessive pressure Bursting disc safety devices
ASTM D 2557 : 1998 : R2004 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55&#176C (-450 to -67&#176F)
SMA 3001 : 1987 SPECIFICATIONS FOR ALUMINUM SWINGING SCREEN DOORS
ASTM D 3115 : 1995 : R2000 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D 1669 : 2007 : R2013 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
ASTM D 3115 : 1995 : R2009 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D 2557 : 1998 : R2017 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM C 1802 : 2014 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref >
ASTM C 1367 : 2006 : R2012 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM C 1146 : 2009 Standard Guide for Prefabricated Panel and H<span class='unicode'>–</span>bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM F 1069 : 1987 : R1999 Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
ASTM D 2918 : 1999 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM F 1217 : 2017 : REDLINE Standard Specification for Cooker, Steam
ASTM E 866 : 2011 : REDLINE SPECIFICATION FOR CORROSION-INHIBITING ADHESIVE PRIMER FOR ALUMINIUM ALLOYS TO BE ADHESIVELY BONDED IN HONEYCOMB SHELTER PANELS
ASTM F 1070 : 1987 : R1999 Standard Specification for Doors, Non-Tight, for Marine Use
ASTM F 1069 : 1987 : R2012 Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
ASTM D 6411/D6411M : 1999 : R2005 Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM D 3658 : 2001 : R2016 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM E 1800 : 2013 : REDLINE Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
ASTM F 1360 : 2017 : REDLINE Standard Specification for Ovens, Microwave, Electric
ASTM F 1718 : 2001 : R2013 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
NFPA 5000 : 2018 BUILDING CONSTRUCTION AND SAFETY CODE
BS EN ISO 10442:2002 Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors
SAE AS 95234A : 2020 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44
MIL-DTL-24728-10 Base Document:2010 INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1017 MM
MIL-DTL-83513 Revision G:2008 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
MIL-DTL-24151 Revision B:2016 DOORS, ROLLER CURTAIN AND HINGED SLAT, AND ASSOCIATED OPERATING EQUIPMENT
MS27291 Revision H:2015 SUPPORT, CABLE, ELECTRICAL CONNECTOR, FOR MIL-DTL-26500
MIL-PRF-25134 Revision C:1996 REMOVER, PAINT AND LACQUER, SOLVENT TYPE
F-F-2790 Base Document:1991 FILTER, AIR EXTENDED AREA, INITIAL INSTALLATION
MIL-STD-2003-3 Revision A:2009 ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (PENETRATIONS)
MIL-STD-2148 Revision A:2016 Vibration Damping Materials, Procedures for Installation, Maintenance, and Repairs
MIL-DTL-3124 Revision E:2014 GENERATOR, ALTERNATING CURRENT, 60-HERTZ (NAVAL SHIPBOARD USE)
MIL-DTL-32139 Revision B:2017 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
MIL-STD-769 Revision K:2015 Insulation Requirements for U.S. Naval Vessels
MIL-B-29172 Revision B:1991 BUILDING, PORTABLE, SKID MOUNTED, KNOCKDOWN
MIL-STD-2003-2 Revision A:2009 ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (EQUIPMENT)
MIL-DTL-24728-9 Base Document:2010 INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1372 MM
MIL-DTL-16036 Revision M:2013 SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD
MIL-STD-2003-4 Revision A:2009 ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLEWAYS)
MIL-DTL-28748-17 Revision B:2016 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, HARDWARE FOR
MIL-B-29171 Revision B:1991 BUILDINGS, RELOCATABLE, INSULATED, METAL, FOLDING FRAME
ASTM B 928/B928M : 2015 : REDLINE Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
MIL-DTL-2726 Revision C:2006 Receptacle, Receptacle Plugs, Switch and Receptacles, and Outlets (Electrical), General Specification for
MIL-DTL-28840-25 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, METAL CONDUIT FOR EMI SHIELDING
ASTM E 1555 : 2012 : REDLINE Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
A-A-2653 Base Document:1992 BINDER, NOTE PAD, SPRING-BACK
MIL-DTL-15370 Revision K:2015 COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR
ASTM F 1178 : 2011 : R2015 Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
MIL-DTL-28840-30 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, METAL CONDUIT COUPLING
MIL-DTL-24800 Base Document:1996 CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS
MIL A 24775 : 0 AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD
MIL-DTL-17667 Revision E:2005 PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON-CORROSIVE)
MIL-STD-278 Revision F:1987 WELDING AND CASTING STANDARD
ASTM B 209M : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
MIL-DTL-24223 Revision D:2014 LOUDSPEAKER, PERMANENT MAGNET, SHIPBOARD ANNOUNCING SYSTEMS
MIL-PRF-63460 Revision F:2017 Cleaner, Lubricant, and Preservative for Weapons and Weapons Systems
MIL-PRF-8116D:2014 PUTTY, GENERAL PURPOSE, NON-HARDENING
MIL-DTL-28840-23 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, GLAND NUT, WIRING
MIL-D-3716 Revision B:1987 DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION
MIL S 16036 : K SWITCHGEAR, POWER, NAVAL SHIPBOARD
MIL-T-52983 Revision G:1994 TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL
MIL-DTL-28837 Revision D:2015 MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR
AASHTO LRFDLTS 1 : 1900 LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS
MIL-DTL-15024 Revision F:1997 Plates and Tags for Identification of Equipment, General Specification for
MIL-PRF-12732 Revision F:2010 HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW
MS24360 Revision C:2016 RING, LOCK, FLIGHT PRESSURE REFUELING NOZZLE
MIL-DTL-24251-3 Revision D:2013 Shield, Electron Tube, Heat Dissipating 7 and 9 Pin, Miniature (Split Shell)
MIL-G-24659 Revision A:1993 GAGE, DIFFERENTIAL, DIAL INDICATING
MIL-DTL-2211 Revision F:2008 Table, Laundry, Folding, 3 by 8 Feet (No S/S Document)
ASTM D 1876 : 2008 : R2015 : EDT 1 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
DOD-B-24668 Base Document:1986 BEARING UNIT, MAIN THRUST, SUBMARINE PROPULSION SYSTEM
MIL-DTL-24705 Revision B:2010 PENETRATORS, MULTIPLE CABLE, ELECTRIC CABLE, GENERAL SPECIFICATION FOR
ASTM F 1070 : 1987 : R2012 Standard Specification for Doors, Non-Tight, for Marine Use
ASTM D 6411/D6411M:1999 Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
MIL A 46158 : 0 ALUMINUM ALLOY STRIP, STAINLESS STEEL CLAD
MIL-STD-2198 Base Document:1990 DESIGN REQUIREMENTS FOR METAL ELECTRICAL BACKPLANE ASSEMBLIES
ASTM D 3115 : 1995 : R2005 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
MIL-B-29165 Revision A:1982 BUILDINGS, PREFABRICATED, PANELIZED: WOOD, ONE-ROOM, ARCTIC CLIMATE
MIL-DTL-28754 Revision E:2016 Connectors, Electrical, Modular, and Component Parts General Specification for
ASTM E 1637 : 1998 : R2003 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
MIL-DTL-21567 Revision B:2009 COMPOUND, SILICONE, SOFT FILM
SAE AIR 5919 : 2017 ALTERNATIVES TO CADMIUM PLATING
PREN 4632-002 : 200P1 AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
SMA 2006 : 87(R1998) SPECIFICATIONS FOR ALUMINUM SLIDING SCREEN DOORS
ASTM C 921 : 2010 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
AWS D3.7 : 2004 GUIDE FOR ALUMINUM HULL WELDING
AWS D1.2/D1.2M : 2014 STRUCTURAL WELDING CODE - ALUMINUM
ASTM F 872 : 1984 : R1990 Specification for Filter Units, Air Conditioning: Viscous-Impingement Type, Cleanable (Withdrawn 1999)
ONORM EN ISO 4126-2 : 2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
ASTM E 1801 : 2015 : REDLINE Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
IEC 63004:2015 Standard for receiver fixture interface
ASTM D 3658 : 2001 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM F 1348/F1348M : 1991 : R2002 Standard Specification for Pneumatic Rotary Descaling Machines
ASTM C 1146 : 2009 : R2018 Standard Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM B 947 : 2014 : REDLINE Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM F 1068 : 1990 : R2007 Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
NF EN 4632-002 : 2008 AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
ASTM F 683 : 2014 : REDLINE Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
ASTM F 1333 : 1991 : R2007 Standard Specification for Construction of Fire and Foam Station Cabinets
ASTM E 1637 : 1998 : R2017 : EDT 1 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
ASTM D 1669/D1669M : 2007 : R2013 : EDT 1 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
ASTM D 3167 : 2010 Standard Test Method for Floating Roller Peel Resistance of Adhesives
EN ISO 4126-2:2003/AC:2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
ASTM D 3165 : 2007 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D 6255/D6255M : 2005 : R2011 Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM F 3192 : 2016 Standard Specification for High-Purity Copper Sputtering Target Used for Through-Silicon Vias (TSV) Mettalization (Withdrawn 2023)
ASTM F 1068 : 1990 : R2003 Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
ASTM E 1637 : 1998 : R2011 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
ASTM D 6412/D6412M : 1999 : R2012 Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
ASTM E 990 : 2013 : REDLINE Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
ASTM E 1637 : 1998 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
MIL-G-18997 Revision E:1991 GAUGE, PRESSURE, DIAL INDICATING
ASME PV CODE 2C : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS
ASME B31.3:2016 PROCESS PIPING
AASHTO M 290 : 1996 SPECIFICATION FOR ACRYLIC PRISMATIC REFLECTORS AND EMBOSSED ALUMINUM FRAMES FOR SIGNS
ASTM F 1333 : 1991 : R1996 : EDT 1 Standard Specification for Construction of Fire and Foam Station Cabinets
MIL-DTL-55041 Revision F:2012 Switches, Waveguide, General Specification for
AASHTO M 181 :2010 SPECIFICATION FOR CHAIN-LINK FENCE
MIL-DTL-14055 Revision G:2014 CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER
MIL-E-24142 Revision B:1984 ENCLOSURE FOR ELECTRICAL FITTINGS AND FIXTURES, GENERAL SPECIFICATION FOR
A-A-50008 Revision A:1988 GRILL, FRANKFURTER, ROLLER TYPE, ELECTRIC
MIL-PRF-46010 Revision H:2013 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
MIL C 15730 : M COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
MIL-DTL-28748-21 Base Document:2005 Connectors, Electrical, Rectangular, Rack and Panel, Printed Wiring Board (PWB) Mount, Right Angle, Socket Contacts, Size 22
MIL-DTL-3928 Revision H:2016 SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR
MIL-DTL-3954 Revision D:2015 DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR
MIL-PRF-6864 Revision F:2010 CLEANING COMPOUND, SOLVENT, OIL COOLER
ASTM F 1069 : 1987 : R2004 Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
NFPA 385 : 2017 TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
15/30299570 DC : 0 BS ISO 7195 - NUCLEAR ENERGY - PACKAGINGS FOR THE TRANSPORT OF URANIUM HEXAFLUORIDE (UF[6])
ASTM D 1781 : 1998 : R2012 Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D 2918 : 1999 : R2005 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
OO-D-2912 Base Document:1997 DISTILLATION UNITS, WATER, THERMOCOMPRESSION, DIESEL-ENGINE-DRIVEN, SKID- OR TRAILER-MOUNTED (60 TO 1000 GPH)
MIL-DTL-1734 Revision J:2002 SLIPS, TENT LINE
MS18204 Revision F:2013 SHELL, ELECTRICAL, CONNECTOR, RECEPTACLE, RECTANGULAR, POLARIZING
ASTM E 1826 : 2012 : REDLINE Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
IEEE 1070-2006 IEEE Guide for the Design and Testing of Transmission Modular Restoration Structure Components
MIL-DTL-28840-15 Revision E:2013 CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, PLUG
ASTM F 1369 : 1993 : REV A Standard Specification for Heaters, Convection, Steam and Hot Water (Withdrawn 2002)
AASHTO M 268 : 2015 SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR FLAT AND VERTICAL TRAFFIC CONTROL APPLICATIONS
MIL-PRF-83936 Revision C:1996 REMOVER, PAINT, TANK TYPE - FOR AIRCRAFT WHEELS, LANDING GEAR COMPONENTS AND OTHER AIRCRAFT AND SUPPORT EQUIPMENT
PPP-C-1842 Revision B:1992 CUSHIONING MATERIAL, PLASTIC, OPEN CELL (FOR PACKAGING APPLICATIONS)
ASTM D 3167 : 2010 : R2017 Standard Test Method for Floating Roller Peel Resistance of Adhesives
GG-A-440 Revision C:1981 ALIDADE, SURVEYING, TELESCOPE
MIL STD 1693 : A NOTICE 2 FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES
MIL-PRF-25567 Revision E:1998 LEAK DETECTION COMPOUND, OXYGEN SYSTEMS
SMA 1004 : 1987 SPECIFICATIONS FOR ALUMINUM TUBULAR FRAME SCREENS FOR WINDOWS
MIL-DTL-28840-8 Revision F:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, CABLE SEALING AND SHIELD TERMINATION
MIL-DTL-24211 Revision D:2016 GASKETS, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR
MIL-PRF-85704 Revision C:1998 CLEANING COMPOUND, TURBINE ENGINE GAS PATH
GOST R 52714:2018 Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method
ACI 362.1R : 2012 GUIDE FOR THE DESIGN AND CONSTRUCTION OF DURABLE CONCRETE PARKING STRUCTURES
ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
ASTM F 1718 : 2001 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
NFPA 386 : 1990 PORTABLE SHIPPING TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
AWWA C562 : 2014 FABRICATED ALUMINUM SLIDE GATES
ASTM C 1367 : 2006 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
I.S. EN ISO 4126-2:2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
SAE AS 95234 : 2014 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
ASTM C 1146 : 2009 : R2013 Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
SAE AMS DTL 22499 : 2013 SHIM STOCK, LAMINATED
ASTM D 3115 : 1995 : R2014 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear (Withdrawn 2019)
ASTM D 1669 : 2007 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
ASTM B 744/B744M : 2015 : REDLINE Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
ASTM D 2557 : 1998 : R2010 : EDT 1 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55&#176C (-450 to -67&#176F)
ASTM C 1696 : 2016 : REDLINE Standard Guide for Industrial Thermal Insulation Systems
ASTM F 1718 : 2001 : R2006 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
S6-14 Canadian Highway Bridge Design Code
ASTM D 6411/D6411M : 1999 : R2012 Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM D 1901 : 2010 Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
ASTM D 3528 : 1996 : R2016 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM E 3110 : 2018 Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs
ASTM D 6412/D6412M : 1999 : R2005 Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 IRC® Code and Commentary, Volume 2
NASA KSC SPEC F 0009 : 1988 DESIGN, FABRICATION, AND ERECTION OF SIGNS AT JOHN F. KENNEDY SPACE CENTER, SPECIFICATION FOR
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 IBC® Code and Commentary, Volume 2
ICC 2012 INTERNATIONAL RESI. CODE : 2012 INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS
MSS SP 119 : 2010 FACTORY-MADE WROUGHT BELLED END PIPE FITTINGS FOR SOCKET-WELDING
MIL-DTL-55302 Revision G:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
A-A-59832 Revision B:2016 EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR
MIL C 22931 : B CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR
AASHTO M 181 : 2010 : R2015 SPECIFICATION FOR CHAIN-LINK FENCE
L-T-80 Revision C:2013 Tape, Pressure-Sensitive Adhesive (Aluminum-Backed)
MIL-PRF-24176 Revision C:2004 CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTHING (METRIC)
ASTM F 1333 : 1991 : R2013 Standard Specification for Construction of Fire and Foam Station Cabinets
MIL-HDBK-270 Revision A:1991 METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)
MIL-DTL-28748-8 Revision F:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE SOCKET CONTACTS, SIZE 22
MIL-DTL-28840-3 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 45 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS
MIL-DTL-55074 Revision G:2013 Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for
MIL-C-1258 Revision D:1983 CUP, OIL, LUBRICATING AND OILERS, SELF-FEEDING
BS IEC 63004:2015 Standard for receiver fixture interface
MIL T 20177 : D NOTICE 1 MILITARY SPECIFICATION TRAINING AID, MODEL BRIDGE, FOR PANEL BRIDGE, M2 BAILEY TYPE
MIL-DTL-22931 Revision D:2013 CABLES, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR
MIL-DTL-83413-7 Revision F:2015 Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Aluminum Clip, Electrical
ASTM F 782 : 2001 : R2007 Standard Specification for Doors, Furniture, Marine
MIL-PRF-87260 Revision B:2006 Foam Material, Explosion Suppression, Inherently Electrostatically Conductive, for Aircraft Fuel Tanks
ASTM D 4956 : 2017 : REDLINE SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL
MIL-B-29194 Revision B:1994 BUILDING ADDITION, PREFABRICATED, READY-CUT, METAL RIGID FRAME, FOR 40- BY 100-FOOT BUILDING
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
MIL-PRF-11090 Revision K:2016 CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT
ASTM F 1433 : 1997 : R2004 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
A-A-59471 Base Document:1999 Dry Cleaning Presses and Finishing Equipment (Naval Shipboard)
MIL-DTL-24251-6 Revision E:2013 SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (RETROFIT TYPE ONLY)
MIL-DTL-28840-1 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, STRAIGHT, OPEN, FOR ELECTRICAL CONNECTORS
BS EN 4632-002:2008 Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials Homogeneous assemblies aluminium and aluminium alloys
ASTM F 1068 : 1990 : R1998 : EDT 1 Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
MIL-PRF-372 Revision F:2017 Cleaning Compound, Solvent (For Bore of Weapons)
API 2CCU : 2017 OFFSHORE CARGO CARRYING UNITS
MIL-DTL-1407 Revision D:2009 PIN SET, MARKING, LAUNDRY
AWS A5.10/A5.10M : 2012 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINUM AND ALUMINUM-ALLOYS - CLASSIFICATION
ASTM D 3528 : 1996 : R2002 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM F 1333 : 1991 : R2002 Standard Specification for Construction of Fire and Foam Station Cabinets
ASTM F 782 : 2001 Standard Specification for Doors, Furniture, Marine
MIL C 28754 : D CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR
MIL-DTL-19834 Revision C:2006 PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED, GENERAL SPECIFICATION FOR
MIL P 24647 : B PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL
ARINC 404B-2:2015 CONNECTORS, RACK AND PANEL, RECTANGULAR REAR RELEASE CRIMP CONTACTS
MS18203 Revision G:2013 SHELL, ELECTRICAL, CONNECTOR, PLUG, RECTANGULAR, POLARIZING
MIL-P-236 Revision J:1992 PIPE, CULVERT, NESTABLE
MIL-DTL-28840-2 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 90 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS
DOD-B-24505 Revision C:1980 BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC)
A-A-59935-1 Base Document:2013 Conical Seals, Crush, 37 Degree Flared Tube Fitting, Aluminum Alloy
ASTM E 865 : 2012 : REDLINE Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
SAE AMS 8660 : 2018 SILICONE COMPOUND NATO CODE NUMBER S-736
SAE J 457 : 2017 CHEMICAL COMPOSITIONS, MECHANICAL PROPERTY LIMITS, AND DIMENSIONAL TOLERANCES OF SAE WROUGHT ALUMINUM ALLOYS
ASTM D 1781 : 1998 : R2004 Standard Test Method for Climbing Drum Peel for Adhesives
API 620 CHINESE : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
SAE AS 85049 : 2016 CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
ASTM D 2918 : 1999 : R2012 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
API 620 REDLINE : 2008 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
NF EN ISO 4126-2 : 2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
ASTM F 1433 : 1997 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
ASTM C 921 : 2010 : R2015 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021)
ASTM D 3433 : 1999 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D 6255/D6255M:2005 Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM E 1794 : 2013 : REDLINE Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
ASTM F 1178 : 2011 Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
ASTM F 1070 : 1987 : R2004 Standard Specification for Doors, Non-Tight, for Marine Use
ASTM B 361 : 2016 : REDLINE Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM F 1433 : 1997 : R2010 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner (Withdrawn 2019)
ASTM D 2649 : 2004 : R2014 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM D 1876 : 2008 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM F 1068 : 1990 : R2012 Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
ASTM C 1729M : 2017 : REDLINE Standard Specification for Aluminum Jacketing for Insulation
GOST 849:2018 Primary nickel. SpecificationsE
ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
EN 4632-002:2008 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys
EN ISO 10442:2002 Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)
AWS A5.3/A5.3M : 1999 SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ELECTRODES FOR SHIELDED METAL ARC WELDING
ASTM E 874 : 2011 : REDLINE PRACTICE FOR ADHESIVE BONDING OF ALUMINUM FACINGS TO NONMETALLIC HONEYCOMB CORE FOR SHELTER PANELS
ASTM B 557M : 2015 : REDLINE Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
MIL-DTL-28748-16 Base Document:2004 Connectors, Electrical, Hexagonal, Rack and Panel, Miniature, Plug-Receptacle, Female Solder Cup Pin Contacts, Size 20
MIL-A-52019 Revision C:1991 ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE
MIL-DTL-25547 Revision C:2002 LOUDSPEAKER, PERMANENT MAGNET LS-211/AIC-13
NASA SSTD 8070 0059 : 2015 LOW PRESSURE ALUMINUM PIPE SYSTEMS WITH PIPING DESIGNATOR &#39;E&#39;
MIL-B-13157 Revision C:1980 BRIDGE, FIXED: PANEL, SINGLE LANE, ALUMINUM
ASTM F 3166 : 2016 Standard Specification for High-Purity Titanium Sputtering Target Used for Through-Silicon Vias (TSV) Metallization (Withdrawn 2023)
MIL-DTL-28840-5 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, METAL CONDUIT FOR EMI SHIELDING
ANSI A201.3 : 1977 SPECIFICATIONS FOR ALUMINUM SWINGING SCREEN DOORS.
MIL-DTL-24728-11 Base Document:2010 INTERCONNECTING BOX, FIBER OPTIC, SPLICE TRAY HOLDER MODULE, 8 TRAY
MIL-DTL-22342 Revision E:1995 BROWS, ALUMINIUM, BEAM AND TRUSS
NFL 06 380-20 : 2003 AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 20: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
AWWA C513 : 2005 OPEN-CHANNEL, FABRICATED-METAL SLIDE GATES AND OPEN-CHANNEL, FABRICATED-METAL WEIR GATES
MIL-DTL-24251-5 Revision D:2013 SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (OPEN SIDES)
ASTM E 1091 : 2013 : REDLINE Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
ASTM B 881 : 2017 : REDLINE Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products
MIL-DTL-52543 Revision E:2010 LIGHT, MARKER, GROUND-OBSTRUCTION
MIL-F-51068 Revision F:1986 FILTERS, PARTICULATE (HIGH-EFFICIENCY FIRE RESISTANT)
ASTM B 253 : 2011 : R2017 Standard Guide for Preparation of Aluminum Alloys for Electroplating
ASTM D 6848 : 2002 Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing (Withdrawn 2011)
ASTM D 3528 : 1996 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
MIL-DTL-28875 Revision C:2012 Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for
MIL-DTL-28840-9 Revision G:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, CABLE SEALING AND SHIELD TERMINATION
MIL-DTL-43695 Revision C:2000 FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE
ASTM D 3433 : 1999 : R2012 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
MIL P 24705 : A PENETRATORS, MULTIPLE CABLE, FOR ELECTRICAL CABLES, GENERAL SPECIFICATION FOR
MIL-DTL-28840-13 Revision F:2013 CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, RECEPTACLE
CSA A440 : 2017 NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS
ANS 57.2 : 1983 LIGHT WATER REACTOR SPENT FUEL STORAGE FACILITIES, REQUIREMENTS FOR,
MIL-DTL-28840-27 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, METAL CONDUIT FOR EMI SHIELDING
MIL-PRF-24647 Revision E:2013 PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL
ASTM D 5363 : 2016 : REDLINE Standard Specification for Anaerobic Single-Component Adhesives (AN)
MIL-DTL-28748-7 Revision F:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE PIN CONTACTS, SIZE 22
MIL-DTL-28840-6 Revision E:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, CABLE SEALING AND SHIELD TERMINATION
ASTM B 253 : 2011 Standard Guide for Preparation of Aluminum Alloys for Electroplating
ANSI/AWWA C903:2016 POLYETHYLENE-ALUMINUM-POLYETHYLENE (PEALPE) COMPOSITE PRESSURE PIPE, 12 MM (1/2 IN.) THROUGH 51 MM (2 IN.), FOR WATER SERVICE
SAE AIR 4789 : 2016 AEROSPACE INFORMATION REPORT ON EVALUATING CORROSION TESTING OF ELECTRICAL CONNECTORS AND ACCESSORIES FOR THE PURPOSE OF QUALIFICATION
S6.1-14 Commentary on S6-14, Canadian Highway Bridge Design Code
ASTM C 1423 : 2016 : REDLINE Standard Guide for Selecting Jacketing Materials for Thermal Insulation
ASTM F 1068 : 1990 SPECIFICATION FOR DOORS, DOUBLE, GASTIGHT/AIRTIGHT, INDIVIDUALLY DOGGED, FOR MARINE USE
UNI EN ISO 4126-2 : 2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES
ASTM C 1802 : 2014 : EDT 1 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref >
ASTM D 2649 : 2004 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM F 993 : 2017 : REDLINE Standard Specification for Valve Locking Devices
ASTM F 1348/F1348M : 1991 : R2013 Standard Specification for Pneumatic Rotary Descaling Machines
ASTM D 2649 : 2004 : R2009 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM F 640 : 2012 : REDLINE Standard Test Methods for Determining Radiopacity for Medical Use
ASTM D 3433 : 1999 : R2005 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D 3528 : 1996 : R2008 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D 3165 : 2007 : R2014 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM B 745/B745M : 2015 : REDLINE Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
ASTM D 1901 : 2010 : R2015 Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
ASTM B 746/B746M : 2016 : REDLINE Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM D 1781 : 1998 Standard Test Method for Climbing Drum Peel for Adhesives
ASME B18.29.1 : 2010 : R2017 Helical Coil Screw Thread Inserts--Free Running and Screw Locking (Inch Series) (B18.29.1 - 2010)
ASME B18.29.1 : 2010 HELICAL COIL SCREW THREAD INSERTS - FREE RUNNING AND SCREW LOCKING (INCH SERIES)
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
ASME B31.3 SPANISH : 2010 PROCESS PIPING

ANSI H35.2 : 2017 DIMENSIONAL TOLERANCES FOR ALUMINUM MILL PRODUCTS
ANSI H35.1/H35.1M : 2017 ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM
ASTM B 918 : 2001 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
ASTM E 607 : 2002 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
ASTM B 666/B666M : 2015 : REDLINE Standard Practice for Identification Marking of Aluminum and Magnesium Products
EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
ASTM B 557 : 2015 : REDLINE Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
SAE AMS 2772 : 2016 HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS
ASTM E 716 : 2016 : REDLINE Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM E 527 : 2016 : REDLINE Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM B 947 : 2014 : REDLINE Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM E 290 : 2014 : REDLINE Standard Test Methods for Bend Testing of Material for Ductility
ASTM B 928/B928M : 2015 : REDLINE Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ASTM E 1004 : 2017 : REDLINE Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM B 660 : 2015 : REDLINE Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

View more information
£92.22
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.