• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM B 221 : 2014 : REDLINE

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

Available format(s)

PDF

Superseded date

22-01-2021

Language(s)

English

Published date

20-10-2014

CONTAINED IN VOL. 02.02, 2014 Describes aluminum and aluminum-alloy extruded bars, rods, wire, profiles, and tubes in the aluminum alloys and tempers.

1.1This specification2 covers aluminum and aluminum-alloy extruded bars, rods, wire, profiles, and tubes in the aluminum alloys (Note 1) and tempers shown in Table 2.

Note 1:Throughout this specification, the use of the term alloy in the general sense includes aluminum as well as aluminum alloy.

Note 2:For rolled or cold-finished bar and rod refer to Specification B211, for drawn seamless tube used in pressure applications, Specification B210, for structural pipe and tube, Specification B429/B429M, and for seamless pipe and tube used in pressure applications, Specification B241/B241M.

Note 3:Pipe and tube products listed in this specification are intended for general purpose applications. This specification may not address the manufacturing processes, integrity testing, and verification required for fluid-carrying applications involving pressure. See Specifications B210 or B241/B241M, or both as appropriate, for seamless pipe and tube used in fluid-carrying applications involving pressure. See Specification B234, as appropriate, for use in surface condensers, evaporators, and heat exchangers.

1.2Alloy and temper designations are in accordance with ANSI H35.1/H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9; for example, A91100 for Aluminum 1100 in accordance with Practice E527.

1.3For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

1.4A complete metric companion to Specification B221 has been developed—Specification B221M; therefore, no metric equivalents are presented in this specification.

Committee
B 07
DevelopmentNote
Supersedes ASTM B 235 and ASTM B 273. (01/2002) Supersedes QQ A 200/1, QQ A 200/2, QQ A 200/3, QQ A 200/4, QQ A 200/5, QQ A 200/6, QQ A 200/7, QQ A 200/8, QQ A 200/9, QQ A 200/11, QQ A 200/13, QQ A 200/14, QQ A 200/17 and QQ A 200/10. (12/2002) Supersedes QQ A 200. (01/2003) Supersedes MIL A 12545 and MIL A 46104. (05/2004) Supersedes SAE AMS QQ A 200/1, SAE AMS QQ A 200/10, SAE AMS QQ A 200/16 and SAE AMS QQ A 200/17. (07/2007) Supersedes SAE AMS QQ A 200/9. (09/2007)
DocumentType
Redline
Pages
18
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
UNE 38119:2004 Identical

ASTM F 985 : 2000 : R2012 Standard Specification for Panama Canal Pilot Platform
MIL I 24728 : A INTERCONNECTION BOX, FIBER OPTIC, METRIC, GENERAL SPECIFICATION FOR
ASTM B 247M : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
MIL-DTL-23971 Revision E:2017 POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL-DTL-32480 Base Document:2014 Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
ASTM F 826 : 1994 : R2010 Standard Specification for Tops, Furniture, Marine, Steel
ASTM B 881 : 2017 : REDLINE Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products
UFC 4-022-03 : 2013 UNIFIED FACILITIES CRITERIA - SECURITY FENCES AND GATES
ASTM B 211 : 2012 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
MIL F 52618/9 : A FITTINGS, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND: GENERAL SPECIFICATION FOR
API 2CCU : 2017 OFFSHORE CARGO CARRYING UNITS
MIL-DTL-3922 Revision E:2016 FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR
ASTM D 3115 : 1995 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
MIL-R-52255 Revision D:1988 REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS
ASTM F 985 : 2000 Standard Specification for Panama Canal Pilot Platform
ASTM C 1802 : 2014 : EDT 1 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref >
ASTM F 1333 : 1991 : R2013 Standard Specification for Construction of Fire and Foam Station Cabinets
MIL-DTL-39030 Revision F:2014 DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
SCTE 15 : 2016 SPECIFICATION FOR TRUNK, FEEDER AND DISTRIBUTION COAXIAL CABLE
ASTM B 928/B928M : 2015 : REDLINE Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ASTM F 824 : 1993 : R1999 Standard Specification for Tables, Mess, Marine, Steel
ASTM D 3115 : 1995 : R2000 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D 3115 : 1995 : R2009 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM C 1802 : 2014 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref >
S6.1-14 Commentary on S6-14, Canadian Highway Bridge Design Code
ASTM F 782 : 2001 : R2012 Standard Specification for Doors, Furniture, Marine
SAE AMS STD 2154 : 2017-05 INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR
ASTM F 1718 : 2001 : R2013 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM B 316/B316M : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
SAE AS 95234A : 2020 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
MIL-DTL-24728-10 Base Document:2010 INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1017 MM
MIL-DTL-83513 Revision G:2008 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
MIL PRF 83513 : D CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
MIL-P-53065 Base Document:1986 PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD
MIL-DTL-32139 Revision B:2017 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
MIL-PRF-32107 Base Document:2002 Hose, Air Duct, General Specification for
MIL-DTL-28754-62 Revision A:2016 CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER, CROSSOVER, CONTACT TAILS ON .050 CENTERS
MIL-DTL-24728-9 Base Document:2010 INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1372 MM
MIL-DTL-24694 Revision A:2011 VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS (22 - 500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE, GENERAL SPECIFICATION FOR (METRIC)
MIL-DTL-16036 Revision M:2013 SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD
MIL-STD-2003-4 Revision A:2009 ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLEWAYS)
A-A-59590 Revision D:2014 HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL DTL 28754/60 : A CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS
MIL-DTL-28754-59 Revision A:2016 CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE)
MIL-DTL-55041 Revision F:2012 Switches, Waveguide, General Specification for
A-A-59789 Revision B:2014 HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL-DTL-2726 Revision C:2006 Receptacle, Receptacle Plugs, Switch and Receptacles, and Outlets (Electrical), General Specification for
MIL-DTL-28840-25 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, METAL CONDUIT FOR EMI SHIELDING
14/30291911 DC : 0 BS ISO 6362-2 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED RODS/BARS, TUBES AND PROFILES - PART 2: MECHANICAL PROPERTIES
MIL-DTL-28840-30 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, METAL CONDUIT COUPLING
MIL-DTL-24800 Base Document:1996 CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS
MIL-DTL-39000 Revision C:2013 Flanges, Waveguide, Ridge, General Specification for
MIL F 39000 : A FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
MIL-DTL-28840-23 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, GLAND NUT, WIRING
MIL S 16036 : K SWITCHGEAR, POWER, NAVAL SHIPBOARD
A-A-59950 Base Document:2014 HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL-DTL-22442-25 Revision B:1998 ASSEMBLY, AIRCRAFT AUDIO, MOLDED RUBBER CONNECTOR MECHANICAL GAUGES
MIL-DTL-28837 Revision D:2015 MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR
AASHTO LRFDLTS 1 : 1900 LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS
MIL-PRF-12732 Revision F:2010 HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW
MIL-DTL-83833 Revision B:2014 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER
MIL-DTL-24705 Revision B:2010 PENETRATORS, MULTIPLE CABLE, ELECTRIC CABLE, GENERAL SPECIFICATION FOR
MIL-DTL-83833 Revision C:2017 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER
ASTM D 3115 : 1995 : R2005 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
MIL-DTL-32371 Base Document:2012 Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
MIL-DTL-28754 Revision E:2016 Connectors, Electrical, Modular, and Component Parts General Specification for
MIL-PRF-24755 Revision B:2010 Fans, Vaneaxial, High Pressure, Naval Shipboard
SAE AIR 5919 : 2017 ALTERNATIVES TO CADMIUM PLATING
ASTM C 1861 : 2017 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
AWS D1.2/D1.2M : 2014 STRUCTURAL WELDING CODE - ALUMINUM
ASTM B 234 : 2017 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
S6-14 Canadian Highway Bridge Design Code
ASTM F 537 : 2001 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
ASTM F 1333 : 1991 : R2007 Standard Specification for Construction of Fire and Foam Station Cabinets
ASTM B 211 : 2012 : EDT 1 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
DSCC 84103 : J HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 3-PIECE, SCREW ACTUATED
ASME B31.1 : 2016 POWER PIPING
ASME B31.3:2016 PROCESS PIPING
MIL F 3922 : B FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR
MIL-DTL-82762 Revision B:2004 CUTTER, DELAY, PROPELLANT ACTUATED, MLU-58/B
AASHTO M 181 :2010 SPECIFICATION FOR CHAIN-LINK FENCE
MIL C 24356 : A COUPLING, SEGMENTED AND SPLIT CLAMPS REATTACHABLE, 2-1/2-, 4-, 6- AND 7- INCH, FOR REFUELING-AT-SEA HOSE
MIL-DTL-15370 Revision K:2015 COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR
ASTM B 234M : 2017 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
MIL-DTL-3928 Revision H:2016 SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR
A-A-59473 Base Document:1999 Curtain, Track, and Suspension System, Berth (Naval Shipboard)
MIL-DTL-3954 Revision D:2015 DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR
WW-C-621 Revision G:1990 COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER OR FABRIC-LINED AND UNLINED)
BS ISO 6362-2:2014 Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles Mechanical properties
MIL-DTL-83798 Revision D:2008 FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-DTL-32460 Revision A:2017 ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL-DTL-28840-15 Revision E:2013 CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, PLUG
MIL-DTL-32464 Revision A:2017 FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL STD 1693 : A NOTICE 2 FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES
MIL-DTL-28840-8 Revision F:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, CABLE SEALING AND SHIELD TERMINATION
MIL-DTL-24211 Revision D:2016 GASKETS, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR
MIL-M-24144 Revision D:1988 Monitors, Frost-Point/Dew-Point, Compressed Air, Semi-Portable (Future Acquisitions for this item may Refer to ST000-AG-IDX-010)
DSCC 84191 : K EXTRACTOR, ELECTRICAL CARD, METAL
B339-14 Cylinders, spheres, and tubes for the transportation of dangerous goods
AWWA C562 : 2014 FABRICATED ALUMINUM SLIDE GATES
ASTM F 824 : 1993 : R2010 Standard Specification for Tables, Mess, Marine, Steel
ASTM D 3115 : 1995 : R2014 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear (Withdrawn 2019)
ASTM B 247 : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM F 1718 : 2001 : R2006 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 985 : 2000 : R2006 Standard Specification for Panama Canal Pilot Platform
ASTM F 824 : 1993 : R2017 Standard Specification for Tables, Mess, Marine, Steel
NASA KSC SPEC F 0009 : 1988 DESIGN, FABRICATION, AND ERECTION OF SIGNS AT JOHN F. KENNEDY SPACE CENTER, SPECIFICATION FOR
A-A-59832 Revision B:2016 EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR
MIL C 22931 : B CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR
AASHTO M 181 : 2010 : R2015 SPECIFICATION FOR CHAIN-LINK FENCE
SAE AMS 3266 : 2017 SEALING COMPOUND, POLYTHIOETHER ELASTOMERIC TWO-PART ELECTRICALLY CONDUCTIVE
MIL-HDBK-270 Revision A:1991 METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)
A-A-59812 Revision A:2015 HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, MULTIPLE PIECE, GENERAL REQUIREMENTS FOR
MIL-DTL-28840-3 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 45 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS
MIL-DTL-28754-13 Revision D:2014 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR ASSEMBLY, TYPE 4, SINGLE SPAN (WITHOUT GUIDE RIBS)
MIL-L-12197 Revision F:1993 LADDER, FIRE, EXTENSION, LADDERS, FIRE, SINGLE, AND LADDERS, FIRE, A-FOLDING EXTENSION
MIL-DTL-52618 Revision F:2012 FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, GENERAL SPECIFICATION FOR
MIL-DTL-22931 Revision D:2013 CABLES, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR
MIL-DTL-83413-7 Revision F:2015 Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Aluminum Clip, Electrical
MIL H 24565 : 0 HOSE AND FITTINGS, OIL AND TURBINE FUEL, SMOOTH BORE, CORRUGATED COVER, 7 INCH
MIL-A-17204 Revision D:1982 ADAPTERS, STRAIGHT OR REDUCING, PIPE THREAD TO HOSE THREAD
MIL-DTL-25995 Revision E:2014 PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED
ACI 362.1R : 2012 GUIDE FOR THE DESIGN AND CONSTRUCTION OF DURABLE CONCRETE PARKING STRUCTURES
ASTM F 1184 : 2016 : REDLINE Standard Specification for Industrial and Commercial Horizontal Slide Gates
MIL-DTL-28840-1 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, STRAIGHT, OPEN, FOR ELECTRICAL CONNECTORS
ASTM F 1333 : 1991 : R2002 Standard Specification for Construction of Fire and Foam Station Cabinets
MIL-DTL-24788 Revision B:2017 Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch
MIL-DTL-28840-2 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 90 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS
ASTM F 537 : 2001 : R2014 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
ASTM F 826 : 1994 : R1999 Standard Specification for Tops, Furniture, Marine, Steel
SAE J 457 : 2017 CHEMICAL COMPOSITIONS, MECHANICAL PROPERTY LIMITS, AND DIMENSIONAL TOLERANCES OF SAE WROUGHT ALUMINUM ALLOYS
API 620 CHINESE : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
ISO 6362-2:2014 Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
API 620 REDLINE : 2008 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
ASTM B 361 : 2016 : REDLINE Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM E 2375 : 2016 : REDLINE Standard Practice for Ultrasonic Testing of Wrought Products
ASTM B 745/B745M : 2015 : REDLINE Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
ASTM F 1333 : 1991 : R1996 : EDT 1 Standard Specification for Construction of Fire and Foam Station Cabinets
MIL-DTL-28754-61 Revision A:2016 CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER, CROSSOVER, CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE)
MIL-A-52019 Revision C:1991 ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE
MIL-B-13157 Revision C:1980 BRIDGE, FIXED: PANEL, SINGLE LANE, ALUMINUM
ASTM F 782 : 2001 : R2007 Standard Specification for Doors, Furniture, Marine
MIL-DTL-28840-5 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, METAL CONDUIT FOR EMI SHIELDING
ASTM F 782 : 2001 Standard Specification for Doors, Furniture, Marine
MIL-DTL-24728-11 Base Document:2010 INTERCONNECTING BOX, FIBER OPTIC, SPLICE TRAY HOLDER MODULE, 8 TRAY
MIL-DTL-22342 Revision E:1995 BROWS, ALUMINIUM, BEAM AND TRUSS
RR-F-191-3 Revision E:2006 Fencing, Wire and Post, Metal (Chain-Link Fence Posts, Top Rails and Braces)
A-A-2622 Revision A:1998 ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING
AWWA C513 : 2005 OPEN-CHANNEL, FABRICATED-METAL SLIDE GATES AND OPEN-CHANNEL, FABRICATED-METAL WEIR GATES
MIL G 24211 : 0 GASKET, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR
MIL F 52618 : D FITTING, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND, GENERAL SPECIFICATION FOR
AA-S-130 Revision B:1991 SCREENS, BEDSIDE, ALUMINUM
ASTM B 253 : 2011 : R2017 Standard Guide for Preparation of Aluminum Alloys for Electroplating
MIL-DTL-28840-9 Revision G:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, CABLE SEALING AND SHIELD TERMINATION
MIL-DTL-43695 Revision C:2000 FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE
MIL P 24705 : A PENETRATORS, MULTIPLE CABLE, FOR ELECTRICAL CABLES, GENERAL SPECIFICATION FOR
MIL-DTL-28840-13 Revision F:2013 CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, RECEPTACLE
MIL-DTL-28840-27 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, METAL CONDUIT FOR EMI SHIELDING
MIL-DTL-28840-6 Revision E:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, CABLE SEALING AND SHIELD TERMINATION
MIL-DTL-24356 Revision B:2017 Couplings and Split Clamps, 2½-, 4-, 6-, and 7-Inch Segmented, Reattachable, for Refueling-At-Sea Hose
A-A-59934 Base Document:2013 Sleeve, Swaging-Wire Rope, Aluminum
SAE AS 85049 : 2016 CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
ASTM B 253 : 2011 Standard Guide for Preparation of Aluminum Alloys for Electroplating
AWS D3.7 : 2004 GUIDE FOR ALUMINUM HULL WELDING
ASTM F 1718 : 2001 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
SAE AIR 4789 : 2016 AEROSPACE INFORMATION REPORT ON EVALUATING CORROSION TESTING OF ELECTRICAL CONNECTORS AND ACCESSORIES FOR THE PURPOSE OF QUALIFICATION
SAE AS 95234 : 2014 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
ASTM F 826 : 1994 : R2004 Standard Specification for Tops, Furniture, Marine, Steel
ASTM F 537 : 2001 : R2007 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
ASTM F 824 : 1993 : R2004 Standard Specification for Tables, Mess, Marine, Steel
ASTM B 746/B746M : 2016 : REDLINE Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM F 826 : 1994 : R2017 Standard Specification for Tops, Furniture, Marine, Steel
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
ASME B31.3 SPANISH : 2010 PROCESS PIPING

ANSI H35.2 : 2017 DIMENSIONAL TOLERANCES FOR ALUMINUM MILL PRODUCTS
ASTM B 807/B807M : 2013 : REDLINE Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
ANSI H35.1/H35.1M : 2017 ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM
MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
ASTM B 234 : 2017 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
ASTM B 918 : 2001 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
ASTM E 607 : 2002 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
ASTM B 666/B666M : 2015 : REDLINE Standard Practice for Identification Marking of Aluminum and Magnesium Products
EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
ASTM B 557 : 2015 : REDLINE Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
FED-STD-123 Revision H:2007 MARKING FOR SHIPMENT (CIVIL AGENCIES)
SAE AMS 2772 : 2016 HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS
ASTM E 716 : 2016 : REDLINE Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM E 527 : 2016 : REDLINE Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ASTM E 1004 : 2017 : REDLINE Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM B 660 : 2015 : REDLINE Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

View more information
£70.87
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.