• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 1193 : 2006 : R2018

Current
Current

The latest, up-to-date edition.

Standard Specification for Reagent Water
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

22-03-2018

This specification describes the required characteristics of waters deemed suitable for use with the standards under the jurisdiction of ASTM.

1.1This specification describes the required characteristics of waters deemed suitable for use with the standards under the jurisdiction of ASTM.

1.2The alphanumeric characters ascribed to water types and grades are specified in the manual, Form and Style for ASTM Standards. These have been assigned in order of historical precedence and should not be taken as an indication of a progression in water purity.

1.3Four types of waters have been specified, with three additional grades that can be applied to the four types. The grade specifications specifically address contaminants of microbiological origin.

1.4All applicable ASTM Standards are expected to reference one or more of these reagent water types where reagent water is needed as a component of an analytical measurement process. Where a different water type or grade is needed for an ASTM Standard, it may be added to this Specification through the ASTM Standard revision process.

1.5Although these water types and associated grades have been defined specifically for use with ASTM Standards, they may be appropriate for other applications. It is the responsibility of the users of this specification to ensure that the selected water types or grades are suitable for their intended use. Historically, reagent water Types I, II, III, and IV have been linked to specific processes for their production. Starting with this revision, these types of waters may be produced with alternate technologies as long as the appropriate constituent specifications are met and that water so produced has been shown to be appropriate for the application where the use of such water is specified. Therefore, the selection of an alternate technology in place of the technology specified in Table 1 should be made taking into account the potential impact of other contaminants such as microorganism and pyrogens. Such contaminants were not necessarily considered by the performance characteristics of the technology previously specified.

(A)Type I grade of reagent water shall be prepared by distillation or other equal process, followed by polishing with a mixed bed of ion-exchange materials and a 0.2-µm membrane filter. Feed water to the final polishing step must have a maximum conductivity of 20 µS/cm at 298K (25°C). Type I reagent water may be produced with alternate technologies as long as the appropriate constituent specifications are met and that water so produced has been shown to be appropriate for the application where the use of such water is specified.
(B)Type II grade of reagent water shall be prepared by distillation using a still designed to produce a distillate having a conductivity of less than 1.0 µS/cm at 298 K (25°C). Ion exchange, distillation, or reverse osmosis and organic adsorption may be required prior to distillation, if the purity cannot be attained by single distillation. Type II reagent water may be produced with alternate technologies as long as the appropriate constituent specifications are met and that water so produced has been shown to be appropriate for the application where the use of such water is specified.
(C)Type III grade of reagent water shall be prepared by distillation, ion exchange, continuous electrodeionization, reverse osmosis, or a combination thereof, followed by polishing with a 0.45-µm membrane filter. Type III reagent water may be produced with alternate technologies as long as the appropriate constituent specifications are met and that water so produced has been shown to be appropriate for the application where the use of such water is specified.
(D)Type IV grade of reagent water may be prepared by distillation, ion exchange, continuous electrodeionization, reverse osmosis, electrodialysis, or a combination thereof. Type IV reagent water may be produced with alternate technologies as long as the appropriate constituent specifications are met and that water so produced has been shown to be appropriate for the application where the use of such water is specified.
(E)Electrical conductivity at 25°C.
(F)Electrical resistivity at 25°C.
(G)pH at 25°C, not applicable to higher resistivity waters.
(H)Total organic carbon.
(I)Sodium.
(J)Chloride ion.
(K)Heterotrophic bacteria count.
(L)Endotoxin in endotoxin units per mL.

1.6Guidance for applications, the preparation, use and monitoring, storage, handling, distribution, testing of these specified waters and validation of the water purification system is provided in Appendix X1 of this specification.

1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 19
DocumentType
Standard
Pages
6
ProductNote
Reconfirmed 2018
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 4085 : 1993 : R2013 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM E 1805 : 2013 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
ASTM D 4952 : 2012 : R2017 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM B 137 : 1995 : R2014 Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM D 4827 : 2003 : R2015 Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM E 203 : 2016 Standard Test Method for Water Using Volumetric Karl Fischer Titration
ASTM D 8155 : 2017 Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
ASTM D 7358 : 2007 : R2018 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
ASTM C 1771 : 2013 Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction
ASTM D 3972 : 2009 : R2015 Standard Test Method for Isotopic Uranium in Water by Radiochemistry (Withdrawn 2024)
ASTM C 872 : 2010 : R2015 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
ASTM F 3012 : 2014 Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
ASTM D 5015 : 2015 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM C 1343 : 2016 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
ASTM D 6470 : 1999 : R2015 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D 7011 : 2015 : R2019 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM D 6276 : 2019 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
ASTM D 3266 : 1991 : R2018 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D 5176 : 2008 : R2015 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D 4445 : 2010 : R2015 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM E 1644 : 2017 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D 5401 : 2003 : R2014 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
ASTM D 2699 : 2019 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
ASTM F 1940 : 2007 : REV A : R2014 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM C 1001 : 2011 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
ASTM C 1844 : 2016 Standard Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution
ASTM D 4793 : 2009 : R2017 Standard Test Method for Sequential Batch Extraction of Waste with Water
ASTM A 428/A428M : 2010 : R2019 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM D 49 : 1983 : R2014 Standard Test Methods of Chemical Analysis of Red Lead
ASTM C 359 : 2018 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
ASTM C 758 : 2018 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
ASTM D 2274 : 2014 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 7840 : 2012 : R2017 Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
ASTM C 1720 : 2017 : EDT 1 Standard Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
ASTM E 291 : 2018 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
ASTM D 2192 : 2006 : R2012 Standard Test Method for Purity of Aldehydes and Ketones (Withdrawn 2021)
ASTM D 5256 : 2014 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM D 4012 : 2015 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D 613 : 2018 : REV A Standard Test Method for Cetane Number of Diesel Fuel Oil
ASTM C 494/C494M : 2017 Standard Specification for Chemical Admixtures for Concrete
ASTM D 1179 : 2016 Standard Test Methods for Fluoride Ion in Water
ASTM D 4782 : 2010 : R2016 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM C 1672 : 2017 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM D 1159 : 2007 : R2017 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
ASTM D 3864 : 2012 Standard Guide for On-Line Monitoring Systems for Water Analysis
ASTM D 2512 : 2017 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023)
ASTM D 6056 : 1996 : R2011 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy (Withdrawn 2020)
ASTM D 3635 : 2013 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM E 778 : 2015 Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples
ASTM E 3193 : 2019 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
ASTM D 2777 : 2013 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM E 222 : 2017 Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
ASTM E 1979 : 2017 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM G 51 : 2018 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM E 1587 : 2017 Standard Test Methods for Chemical Analysis of Refined Nickel
ASTM E 1673 : 1996 : R2017 Standard Test Method for Percent Suspensibility
ASTM D 934 : 2013 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction (Withdrawn 2022)
ASTM D 3590 : 2017 Standard Test Methods for Total Kjeldahl Nitrogen in Water
ASTM D 5284 : 2009 : R2017 Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
ASTM G 108 : 1994 : R2015 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
ASTM G 134 : 2017 Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet
ASTM G 110 : 1992 : R2015 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
ASTM G 28 : 2002 : R2015 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
ASTM C 1411 : 2014 Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
ASTM E 2914/E2914M : 2019 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
ASTM D 7572 : 2015 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil
ASTM E 536 : 2016 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ASTM D 3752 : 1998 : R2019 Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix (Withdrawn 2022)
ASTM C 1414 : 2001 : R2014 Standard Practice for The Separation of Americium from Plutonium by Ion Exchange (Withdrawn 2020)
ASTM D 5811 : 2008 : R2013 Standard Test Method for Strontium-90 in Water
ASTM F 2661 : 2007 : R2015 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
ASTM C 759 : 2018 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
ASTM D 3718 : 1985 : REV A : R2015 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D 3328 : 2006 : R2013 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
ASTM D 5600 : 2017 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 50 : 2017 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM C 1590 : 2004 : R2014 Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
ASTM D 3926 : 2005 : R2019 Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
ASTM B 368 : 2009 : R2014 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM E 1945 : 2002 : R2016 Standard Test Method for Percent Dispersibility
ASTM D 3223 : 2017 Standard Test Method for Total Mercury in Water
ASTM D 2976 : 2015 Standard Test Method for pH of Peat Materials
ASTM B 489 : 1985 : R2018 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM D 7458 : 2014 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
ASTM E 353 : 2014 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM E 2406 : 2016 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations
ASTM D 1426 : 2015 Standard Test Methods for Ammonia Nitrogen In Water
ASTM E 1615 : 2016 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM C 1622/C1622M : 2010 : R2016 : EDT 1 Standard Specification for Cold-Weather Admixture Systems
ASTM D 7670 : 2010 : R2017 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM D 7362 : 2014 Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition (Withdrawn 2023)
ASTM D 5847 : 2002 : R2012 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 8083 : 2016 Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
ASTM E 538 : 2017 : REV A Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide) (Withdrawn 2023)
ASTM G 34 : 2001 : R2018 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM D 1681 : 2005 : R2014 Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure (Withdrawn 2023)
ASTM D 2982 : 2007 : R2013 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM C 1567 : 2013 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
ASTM D 2613 : 2001 : R2017 Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
ASTM G 208 : 2012 : R2016 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
ASTM D 7882 : 2013 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
ASTM D 7574 : 2016 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM G 93 : 2003 : R2011 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
ASTM C 169 : 2016 Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
ASTM D 5794 : 1995 : R2014 Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
ASTM D 8088 : 2016 Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy
ASTM D 4131 : 2019 Standard Practice for Sampling Fish with Rotenone
ASTM D 511 : 2014 Standard Test Methods for Calcium and Magnesium In Water
ASTM D 3559 : 2015 Standard Test Methods for Lead in Water (Withdrawn 2024)
ASTM D 7439 : 2014 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM D 7678 : 2017 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
ASTM D 7937 : 2015 Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
ASTM D 1475 : 2013 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 516 : 2016 Standard Test Method for Sulfate Ion in Water
ASTM C 1507 : 2012 Standard Test Method for Radiochemical Determination of Strontium-90 in Soil
ASTM D 2364 : 2015 Standard Test Methods for Hydroxyethylcellulose
ASTM D 1072 : 2006 : R2017 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM D 1783 : 2001 : R2012 : EDT 1 Standard Test Methods for Phenolic Compounds in Water
ASTM D 7923 : 2019 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 3370 : 2018 Standard Practices for Sampling Water from Flowing Process Streams
ASTM E 224 : 2016 Standard Test Methods for Analysis of Hydrochloric Acid
ASTM D 6851 : 2002 : R2011 Standard Test Method for Determination of Contact pH with Activated Carbon
ASTM D 1401 : 2018 : REV B Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM F 302 : 2009 : R2015 Standard Practice for Field Sampling of Aerospace Fluids in Containers
ASTM D 7283 : 2017 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
ASTM C 1220 : 2017 Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
ASTM D 1176 : 2014 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
ASTM D 5860 : 1995 : R2013 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM D 5070 : 1990 : R2014 Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations (Withdrawn 2023)
ASTM D 5744 : 2018 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D 2351 : 1990 : R2015 Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints (Withdrawn 2023)
ASTM D 6071 : 2014 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D 2350 : 1990 : R2015 Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints (Withdrawn 2023)
ASTM D 6059 : 1996 : R2011 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy (Withdrawn 2020)
ASTM D 2959 : 1995 : R2017 Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM D 3838 : 2005 : R2017 Standard Test Method for pH of Activated Carbon
ASTM D 887 : 2013 Standard Practices for Sampling Water-Formed Deposits
ASTM D 4453 : 2017 Standard Practice for Handling of High Purity Water Samples
ASTM D 3673 : 1989 : R2016 Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
ASTM D 7716 : 2011 : REV A Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
ASTM D 6081 : 2019 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM D 4008 : 2019 Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents
ASTM C 1832 : 2016 Standard Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer
ASTM E 2371 : 2013 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM D 7730 : 2017 Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM C 1254 : 2018 Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
ASTM D 2896 : 2015 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM E 506 : 2017 : REV A Standard Test Method for Mercury in Liquid Chlorine
ASTM E 298 : 2017 : REV A Standard Test Methods for Assay of Organic Peroxides
ASTM D 6489 : 1999 : R2012 Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
ASTM D 4994 : 2019 Standard Practice for Recovery of Viruses from Wastewater Sludges
ASTM G 37 : 1998 : R2016 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
ASTM D 7577 : 2012 : R2016 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM C 1347 : 2008 : R2014 : EDT 1 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
ASTM D 3610 : 2000 : R2015 Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D 4148 : 1982 : R2012 Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method (Withdrawn 2020)
ASTM D 3986 : 2017 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
ASTM G 44 : 1999 : R2013 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution
ASTM D 4251 : 1989 : R2016 Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
ASTM E 1821 : 2008 : R2015 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM F 862 : 2011 : R2017 Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM D 4890 : 2018 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
ASTM B 895 : 2016 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
ASTM D 2193 : 2006 : R2012 Standard Test Method for Hydroquinone in Vinyl Acetate (Withdrawn 2021)
ASTM D 8149 : 2017 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
ASTM D 7637 : 2010 : R2015 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
ASTM D 3685/D3685M : 2013 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D 1977 : 2016 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM E 2242 : 2013 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
ASTM D 6188 : 2017 Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
ASTM D 5755 : 2009 : R2014 : EDT 1 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading (Withdrawn 2023)
ASTM D 513 : 2016 Standard Test Methods for Total and Dissolved Carbon Dioxide in Water
ASTM D 483 : 2004 : R2018 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
ASTM D 1569 : 2005 : R2014 Standard Test Methods for Detergent Alkylate (Withdrawn 2023)
ASTM D 6647 : 2018 Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
ASTM E 1019 : 2018 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
ASTM E 1645 : 2016 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM D 4763 : 2006 : R2012 Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
ASTM D 5153 : 2010 : R2016 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM C 233/C233M : 2018 Standard Test Method for Air-Entraining Admixtures for Concrete
ASTM D 2379 : 2009 : R2017 Standard Test Method for Acidity of Formaldehyde Solutions
ASTM D 1126 : 2017 Standard Test Method for Hardness in Water
ASTM D 2510 : 1994 : R2017 Standard Test Method for Adhesion of Solid Film Lubricants
ASTM D 5004 : 2011 : R2017 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM F 326 : 2017 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
ASTM D 3697 : 2017 Standard Test Method for Antimony in Water
ASTM D 7464 : 2014 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM E 1277 : 2014 Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
ASTM E 278 : 2001 : R2015 : EDT 1 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
ASTM D 8028 : 2017 Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
ASTM F 1094 : 1987 : R2012 Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 8010 : 2018 Standard Test Method for Determination of Water Soluble Alkali Content in Coal
ASTM D 4922 : 2009 : R2016 : EDT 1 Standard Test Method for Determination of Radioactive Iron in Water
ASTM D 2087 : 2006 : R2012 Standard Test Method for Iron in Formaldehyde Solutions (Withdrawn 2021)
ASTM D 4045 : 2015 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM F 1977 : 2004 : R2017 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM D 3267 : 2012 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM E 258 : 2007 : R2015 Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method (Withdrawn 2019)
ASTM C 1880 : 2019 Standard Practice for Sampling Gaseous Uranium Hexafluoride using Alumina Pellets
ASTM D 4981 : 2019 Standard Practice for Screening of Oxidizers in Waste
ASTM D 3082 : 2015 Standard Test Method for Boron in Water
ASTM E 1473 : 2016 Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys
ASTM D 6302 : 1998 : R2017 Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
ASTM C 1636 : 2013 Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride
ASTM G 31 : 2012 : REV A GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS
ASTM D 5530 : 2015 Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
ASTM C 1769 : 2015 Standard Practice for Analysis of Spent Nuclear Fuel to Determine Selected Isotopes and Estimate Fuel Burnup (Withdrawn 2023)
ASTM D 5932 : 2008 : R2013 : EDT 1 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
ASTM E 465 : 2011 : R2017 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
ASTM F 483 : 2009 : R2014 Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
ASTM E 1295 : 2001 : R2013 Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with <emph type="ital">Ceriodaphnia dubia</emph><emph type="bold">
ASTM D 6520 : 2018 Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
ASTM F 1111 : 2008 : REV B : R2013 Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
ASTM D 1245 : 2017 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
ASTM D 3644 : 2015 Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
ASTM D 7736 : 2019 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM D 3861 : 1991 : R2011 Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters (Withdrawn 2020)
ASTM D 5543 : 2015 Standard Test Method for Low-Level Dissolved Oxygen in Water
ASTM D 3546 : 2005 : R2019 Standard Test Method for Formic Acid in Glacial Acetic Acid
ASTM E 2679 : 2009 : R2016 : EDT 1 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by<brk />Non-Aqueous Potentiometric Titration
ASTM D 4538 : 2015 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM D 7785 : 2012 Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration
ASTM C 781 : 2018 Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components
ASTM E 411 : 2017 : REV A Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
ASTM E 1560 : 2018 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM F 1113 : 1987 : R2017 Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
ASTM E 1584 : 2017 Standard Test Method for Assay of Nitric Acid
ASTM D 7535 : 2009 : R2015 Standard Test Method for Lead-210 in Water (Withdrawn 2024)
ASTM D 3326 : 2007 : R2017 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM F 22 : 2013 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM D 7437 : 2008 : R2013 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
ASTM D 1068 : 2015 Standard Test Methods for Iron in Water
ASTM D 4458 : 2015 Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
ASTM D 94 : 2007 : R2017 Standard Test Methods for Saponification Number of Petroleum Products
ASTM D 3427 : 2015 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
ASTM G 144 : 2001 : R2014 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM D 2340 : 2018 Standard Test Method for Peroxides in Styrene Monomer
ASTM G 168 : 2017 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
ASTM D 6304 : 2016 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM C 1432 : 2015 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
ASTM E 875 : 2015 Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry
ASTM D 3872 : 2005 : R2019 Standard Test Method for Ferrous Iron in Iron Oxides
ASTM D 2247 : 2015 Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM F 482 : 2009 : R2014 Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
ASTM D 4196 : 2005 : R2011 Standard Test Method for Confirming the Sterility of Membrane Filters
ASTM C 1845 : 2016 Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D 7513 : 2017 Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
ASTM D 1135 : 1986 : R2014 Standard Test Methods for Chemical Analysis of Blue Pigments
ASTM D 5128 : 2014 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM E 2313 : 2015 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM D 5904 : 2002 : R2017 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D 7511 : 2012 : R2017 : EDT 1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D 4456 : 2017 Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
ASTM D 6480 : 2019 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
ASTM D 3645 : 2015 Standard Test Methods for Beryllium in Water
ASTM D 3794 : 2018 Standard Guide for Testing Coil Coatings
ASTM D 7645 : 2016 Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 2276 : 2006 : R2014 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 6284 : 2017 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
ASTM D 5969 : 2011 : R2016 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D 4563 : 2002 : R2015 Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
ASTM D 3603 : 2014 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
ASTM D 4315 : 1994 : R2017 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM D 8126 : 2017 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1394 : 1976 : R2014 Standard Test Methods for Chemical Analysis of White Titanium Pigments
ASTM C 471M : 2017 : REV A : EDT 1 Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
ASTM C 1260 : 2014 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
ASTM D 6731 : 2018 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
ASTM F 451 : 2016 Standard Specification for Acrylic Bone Cement
ASTM B 456 : 2017 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium
ASTM E 507 : 2013 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM D 5808 : 2018 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
ASTM D 5363 : 2016 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM C 1346 : 2019 Standard Practice for Dissolution of UF<inf>6</inf> from P-10 Tubes
ASTM D 3695 : 1995 : R2013 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
ASTM F 485 : 2008 : R2019 Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
ASTM D 5891/D5891M : 2002 : R2016 : EDT 1 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
ASTM D 1093 : 2011 : R2017 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
ASTM D 5012 : 2001 : R2013 Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
ASTM D 4834 : 2003 : R2014 Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
ASTM D 7946 : 2014 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
ASTM D 5175 : 1991 : R2017 : EDT 1 Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
ASTM E 3203 : 2019 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM D 7237 : 2018 Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM D 470 : 2013 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D 8247 : 2019 Standard Test Method for Determination of Total Fluorine and Total Chlorine in Coal by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection
ASTM E 2594 : 2009 : R2014 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM D 4282 : 2015 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
ASTM D 5174 : 2007 : R2013 Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry (Withdrawn 2022)
ASTM D 6994 : 2015 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
ASTM E 1899 : 2016 Standard Test Method for Hydroxyl Groups Using Reaction with <emph type="ital">p</emph >-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide
ASTM D 5197 : 2016 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
ASTM C 1301 : 1995 : R2014 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
ASTM D 5316 : 1998 : R2017 Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
ASTM D 7365 : 2009 : REV A : R2015 Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
ASTM D 2180 : 2017 Standard Test Method for Active Oxygen in Bleaching Compounds
ASTM D 4755 : 1995 : R2015 : EDT 1 Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures
ASTM G 60 : 2001 : R2018 Standard Practice for Conducting Cyclic Humidity Exposures
ASTM D 7315 : 2017 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
ASTM D 5953M : 2016 Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
ASTM D 5392 : 2019 Standard Test Method for Isolation and Enumeration of <emph type="bdit">Escherichia coli</emph> in Water by the Two-Step Membrane Filter Procedure
ASTM D 1845 : 1986 : R2014 Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment
ASTM D 3856 : 2011 : R2015 Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water (Withdrawn 2024)
ASTM D 6586 : 2003 : R2014 Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
ASTM C 560 : 2015 : EDT 1 Standard Test Methods for Chemical Analysis of Graphite
ASTM D 8032 : 2016 Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration
ASTM D 8063 : 2018 Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
ASTM F 21 : 2014 Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
ASTM D 6503 : 2019 Standard Test Method for Enterococci in Water Using Enterolert
ASTM D 6903 : 2007 : R2013 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
ASTM D 2036 : 2009 : R2015 Standard Test Methods for Cyanides in Water
ASTM D 1209 : 2005 : R2019 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 4350 : 2016 Standard Test Method for Corrosivity Index of Plastics and Fillers
ASTM E 2274 : 2016 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants
ASTM D 2973 : 2016 Standard Test Method for Total Nitrogen in Peat Materials
ASTM B 678 : 1986 : R2017 Standard Test Method for Solderability of Metallic-Coated Products
ASTM D 7781 : 2014 Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase (Withdrawn 2023)
ASTM E 2469 : 2016 Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
ASTM D 3557 : 2017 Standard Test Methods for Cadmium in Water
ASTM D 6845 : 2018 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM G 87 : 2002 : R2018 Standard Practice for Conducting Moist SO<inf>2</inf> Tests
ASTM G 192 : 2008 : R2014 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM D 2010/D2010M : 1998 : R2017 Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
ASTM D 717 : 1986 : R2014 Standard Test Methods for Analysis of Magnesium Silicate Pigment
ASTM D 3376 : 2018 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM D 7359 : 2018 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 5542 : 2016 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 1767 : 1989 : R2017 Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
ASTM D 1429 : 2013 Standard Test Methods for Specific Gravity of Water and Brine (Withdrawn 2022)
ASTM D 6919 : 2017 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
ASTM G 120 : 2015 Standard Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
ASTM D 8130 : 2017 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
ASTM D 1385 : 2007 : R2018 : EDT 1 Standard Test Method for Hydrazine in Water
ASTM E 1200 : 2019 Standard Practice for Preserving Zooplankton Samples
ASTM D 5173 : 2015 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
ASTM D 4972 : 2019 Standard Test Methods for pH of Soils
ASTM D 50 : 1990 : R2019 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
ASTM D 1617 : 2007 : R2012 Standard Test Method for Ester Value of Solvents and Thinners (Withdrawn 2021)
ASTM D 3270 : 2013 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM D 5246 : 2015 Standard Test Method for Isolation and Enumeration of <emph type="ital">Pseudomonas aeruginosa </emph> from Water
ASTM D 3803 : 1991 : R2014 Standard Test Method for Nuclear-Grade Activated Carbon
ASTM D 3227 : 2016 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 4137 : 1982 : R2012 Standard Practice for Preserving Phytoplankton Samples (Withdrawn 2020)
ASTM C 1017/C1017M : 2013 : EDT 1 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (Withdrawn 2022)
ASTM D 7933 : 2015 Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers
ASTM D 5085 : 2002 : R2013 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 4638 : 2016 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM F 3293 : 2018 Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
ASTM D 3865 : 2009 : R2015 Standard Test Method for Plutonium in Water (Withdrawn 2024)
ASTM D 4412 : 2015 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
ASTM D 3516 : 1989 : R2011 Standard Test Methods for Ashing Cellulose
ASTM D 4548 : 2011 Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
ASTM D 3454 : 2018 Standard Test Method for Radium-226 in Water
ASTM D 5257 : 2017 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
ASTM D 4978 : 2016 Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM D 1918/D1918M : 1995 : R2017 Standard Test Method for Asbestos Content of Asbestos Textiles (Withdrawn 2022)
ASTM D 3977 : 1997 : R2013 : EDT 1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM E 2193 : 2016 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
ASTM D 4658 : 2015 Standard Test Method for Sulfide Ion in Water (Withdrawn 2024)
ASTM C 1580 : 2015 Standard Test Method for Water-Soluble Sulfate in Soil
ASTM D 7457 : 2012 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry (Withdrawn 2019)
ASTM E 1235 : 2012 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM F 945 : 2012 : R2019 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM D 7363 : 2013 : REV A Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
ASTM D 3160 : 2016 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)
ASTM B 154 : 2016 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
ASTM D 1687 : 2017 Standard Test Methods for Chromium in Water
ASTM B 858 : 2006 : R2018 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
ASTM D 1498 : 2014 Standard Test Method for Oxidation-Reduction Potential of Water
ASTM D 4517 : 2015 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D 2272 : 2014 : REV A Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM E 815 : 2017 : REV B Standard Test Method for Determination of Calcium Fluoride in Fluorspar by EDTA Complexometric Titrimetry
ASTM C 1868 : 2018 Standard Practice for Ceramographic Preparation of UO<inf>2</inf> and Mixed Oxide (U,Pu)O<inf>2</inf> Pellets for Microstructural Analysis
ASTM D 612 : 1988 : R2017 Standard Test Method for Carbonizable Substances in Paraffin Wax
ASTM G 131 : 1996 : R2016 : EDT 1 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
ASTM D 7883 : 2013 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography
ASTM D 4725 : 2015 Standard Terminology for Engine Coolants and Related Fluids
ASTM G 67 : 2018 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM D 6810 : 2013 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 7334 : 2008 : R2013 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
ASTM G 103 : 1997 : R2016 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution
ASTM D 6357 : 2011 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry
ASTM D 4839 : 2003 : R2017 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D 7391 : 2017 : EDT 1 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM D 7939 : 2015 Standard Test Method for Rapid Radiochemical Determination of Americium-241 in Water (Withdrawn 2024)
ASTM D 4698 : 1992 : R2013 Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
ASTM D 7047 : 2015 : EDT 1 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)
ASTM D 1218 : 2012 : R2016 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
ASTM D 7168 : 2016 Standard Test Method for <sup>99</sup>Tc in Water by Solid Phase Extraction Disk
ASTM D 4663 : 2015 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
ASTM C 1234 : 2011 : R2019 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM F 316 : 2003 : R2011 Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
ASTM D 1890 : 2015 : R2017 Standard Test Method for Beta Particle Radioactivity of Water
ASTM E 688 : 1994 : R2011 Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019)
ASTM D 501 : 2003 : R2016 Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
ASTM E 2664 : 2016 Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
ASTM D 6139 : 2018 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
ASTM C 1637 : 2013 Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
ASTM D 7903 : 2014 Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges
ASTM D 4107 : 2008 : R2013 Standard Test Method for Tritium in Drinking Water
ASTM E 1153 : 2014 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces
ASTM D 7216 : 2019 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
ASTM E 1839 : 2013 Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime
ASTM G 72/G72M : 2015 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM D 1363 : 2006 : R2019 Standard Test Method for Permanganate Time of Acetone and Methanol
ASTM D 3682 : 2013 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
ASTM D 6832 : 2013 : R2018 Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
ASTM D 3863 : 1987 : R2011 Standard Test Method for Retention Characteristics of 0.40 to 0.45-<span class='unicode'>μ</span>m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality (Withdrawn 2020)
ASTM G 85 : 2011 Standard Practice for Modified Salt Spray (Fog) Testing
ASTM D 2129 : 2017 Standard Test Method for Color of Clear Electrical <brk/>Insulating Liquids (Platinum-Cobalt Scale)
ASTM C 1163 : 2014 Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
ASTM D 1125 : 2014 Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023)
ASTM F 1089 : 2018 Standard Test Method for Corrosion of Surgical Instruments
ASTM D 4018 : 2017 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
ASTM G 205 : 2016 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
ASTM D 4189 : 2007 : R2014 Standard Test Method for Silt Density Index (SDI) of Water (Withdrawn 2023)
ASTM G 123 : 2000 : R2015 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM G 129 : 2000 : R2013 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
ASTM D 7644 : 2016 Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 4691 : 2017 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
ASTM E 2090 : 2012 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM D 7342 : 2015 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
ASTM D 3969 : 2001 : R2012 Standard Test Method for Zirconium in Paint Driers by EDTA Method
ASTM D 4165 : 2006 : R2012 Standard Test Method for Cyanogen Chloride in Water
ASTM D 1278 : 1991 : REV A : R2015 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
ASTM D 6572 : 2013 : EDT 2 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
ASTM D 6021 : 2012 : R2017 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM D 857 : 2017 Standard Test Method for Aluminum in Water
ASTM C 1508 : 2018 Standard Test Method for Determination of Bromine and Chlorine in UF<inf>6</inf> and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
ASTM D 3618 : 2005 : R2015 Standard Test Method for Detection of Lead in Paint and Dried Paint Films
ASTM D 5776 : 2014 : REV A Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
ASTM D 1652 : 2011 : R2019 Standard Test Method for Epoxy Content of Epoxy Resins
ASTM E 1297 : 2018 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
ASTM C 697 : 2016 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
ASTM F 1864 : 2016 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
ASTM D 2074 : 2007 : R2013 Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
ASTM G 97 : 2018 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM D 5258 : 2002 : R2013 Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
ASTM C 1218/C1218M : 2017 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM D 4370 : 2001 : R2017 Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
ASTM D 2942 : 2002 : R2018 Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
ASTM C 968 : 2012 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
ASTM D 4735 : 2019 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
ASTM D 5058 : 2012 Standard Practices for Compatibility of Screening Analysis of Waste
ASTM G 198 : 2017 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
ASTM D 1301 : 1991 : R2014 Standard Test Methods for Chemical Analysis of White Lead Pigments
ASTM B 994/B994M : 2015 Standard Specification for Nickel-Cobalt Alloy Coating
ASTM D 800 : 2005 : R2014 Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions (Withdrawn 2023)
ASTM D 6691 : 2017 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
ASTM E 2295 : 2013 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
ASTM E 1834 : 2018 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 5896 : 1996 : R2012 Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
ASTM E 263 : 2018 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
ASTM D 5608 : 2016 Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites
ASTM C 889 : 2018 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd<inf>2</inf>O<inf>3</inf>) Powder
ASTM D 7521 : 2016 Standard Test Method for Determination of Asbestos in Soil
ASTM C 1168 : 2015 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
ASTM D 4625 : 2016 : EDT 1 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D 3717 : 1985 : REV A : R2015 Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D 4468 : 1985 : R2015 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<brk/> Rateometric Colorimetry
ASTM D 5810 : 1996 : R2015 Standard Guide for Spiking into Aqueous Samples
ASTM D 8005 : 2018 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 1613 : 2017 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4194 : 2003 : R2014 Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
ASTM D 2349 : 1990 : R2014 Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
ASTM C 761 : 2018 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
ASTM D 1568 : 2005 : R2014 Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates (Withdrawn 2023)
ASTM D 5627 : 2017 Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
ASTM D 8214 : 2018 Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 1653 : 2013 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 6331 : 2016 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D 2448 : 1985 : R2012 Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
ASTM D 5830 : 2014 Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
ASTM E 2941 : 2014 Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion
ASTM D 3168 : 1985 : R2016 Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
ASTM D 5194 : 2018 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
ASTM D 5984 : 2011 : R2017 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
ASTM G 35 : 1998 : R2015 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
ASTM D 7133 : 2016 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D 1253 : 2014 Standard Test Method for Residual Chlorine in Water
ASTM D 7658 : 2017 Standard Test Method for Direct Microscopy of Fungal Structures from Tape
ASTM D 365 : 2001 : R2017 Standard Guide for Soluble Nitrocellulose Base Solutions
ASTM B 117 : 2018 Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM D 3862 : 2013 Standard Test Method for Retention Characteristics of 0.2-&#181m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
ASTM D 8002 : 2015 : EDT 1 Standard Test Method for Modified Fouling Index (MFI-0.45) of Water (Withdrawn 2024)
ASTM C 809 : 2019 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum<brk/>Oxide-Boron Carbide Composite Pellets
ASTM D 3912 : 2010 : R2017 Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
ASTM D 5827 : 2009 : R2015 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 5577 : 2019 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ASTM B 827 : 2005 : R2014 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
ASTM D 5116 : 2017 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
ASTM D 1534 : 1995 : R2017 Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
ASTM G 48 : 2011 : R2015 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM D 6317 : 2015 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D 6490 : 1999 : R2014 Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
ASTM D 7968 : 2017 : REV A Standard Test Method for Determination of Polyfluorinated Compounds in Soil by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 6530 : 2000 : R2013 Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
ASTM D 2570 : 2016 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 8084 : 2017 Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water
ASTM E 2967 : 2015 Standard Test Method for Assessing the Ability of Pre-wetted Towelettes to Remove and Transfer Bacterial Contamination on Hard, Non-Porous Environmental Surfaces Using the Wiperator (Withdrawn 2024)
ASTM D 7979 : 2017 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 8207 : 2018 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry (Withdrawn 2023)
ASTM D 2791 : 2013 Standard Test Method for On-line Determination of Sodium in Water
ASTM D 3867 : 2016 Standard Test Methods for Nitrite-Nitrate in Water
ASTM D 3868 : 2015 Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
ASTM E 738 : 2011 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry (Withdrawn 2020)
ASTM D 2700 : 2019 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM C 225 : 1985 : R2014 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM D 4129 : 2005 : R2013 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM D 3919 : 2015 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D 6569 : 2014 Standard Test Method for On-Line Measurement of pH (Withdrawn 2023)
ASTM D 847 : 2016 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
ASTM D 4584 : 2005 : R2015 Standard Test Method for Measuring Apparent pH of Electrocoat Baths
ASTM D 3246 : 2015 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry (Withdrawn 2024)
ASTM D 4487 : 1990 : R2014 Standard Test Methods for Analysis of Calcium Borosilicate
ASTM E 563 : 2011 : R2016 Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
ASTM D 3923 : 2008 : R2014 Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
ASTM D 4266 : 2017 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
ASTM C 1000 : 2011 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
ASTM C 1477 : 2008 : R2014 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
ASTM D 5011 : 2017 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
ASTM E 945 : 2012 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry (Withdrawn 2021)
ASTM D 1614 : 2009 : R2017 Standard Test Method for Alkalinity in Acetone
ASTM D 3087 : 2017 Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
ASTM G 1 : 2003 : R2017 : EDT 1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
ASTM E 407 : 2007 : R2015 : EDT 1 Standard Practice for Microetching Metals and Alloys
ASTM D 2022 : 1989 : R2016 Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
ASTM D 153 : 1984 : R2014 Standard Test Methods for Specific Gravity of Pigments
ASTM E 1589 : 2005 : R2015 Standard Test Method for Evaluation of First Aid Antiseptic Drug Products
ASTM D 6529 : 2011 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50<span class='unicode'>–</span>1000 <span class='unicode'>μ</span>S/cm (Withdrawn 2020)
ASTM G 86 : 2017 Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
ASTM D 5462 : 2013 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
ASTM D 4940 : 2015 : EDT 1 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives
ASTM G 69 : 2012 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM D 6785 : 2013 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM C 1647 : 2013 Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials
ASTM C 1663 : 2018 Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
ASTM D 5513 : 2015 Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
ASTM D 718 : 1986 : R2014 Standard Test Methods for Analysis of Aluminum Silicate Pigment
ASTM E 396 : 2017 Standard Test Methods for Chemical Analysis of Cadmium
ASTM D 6447 : 2009 : R2014 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
ASTM D 3624 : 1985 : REV A : R2015 Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D 8186 : 2018 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)
ASTM D 1971 : 2016 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
ASTM F 484 : 2008 : R2019 Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
ASTM D 7261 : 2017 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D 5233 : 1992 : R2017 Standard Test Method for Single Batch Extraction Method for Wastes
ASTM C 1474 : 2019 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
ASTM D 4742 : 2017 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM D 3372 : 2017 Standard Test Method for Molybdenum in Water
ASTM E 887 : 2015 Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
ASTM D 6442 : 2006 : R2012 Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
ASTM D 7575 : 2011 : R2017 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
ASTM E 841 : 2012 : REV A Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry (Withdrawn 2021)
ASTM D 5987 : 1996 : R2015 Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods (Withdrawn 2020)
ASTM F 3044 : 2014 Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
ASTM E 1787 : 2016 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
ASTM D 6767 : 2016 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
ASTM D 5145 : 2009 : R2014 Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
ASTM D 7126 : 2015 Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM D 7677 : 2016 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
ASTM D 5057 : 2017 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
ASTM D 8001 : 2016 : EDT 1 Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
ASTM D 1691 : 2017 Standard Test Methods for Zinc in Water
ASTM D 1291 : 2017 Standard Practice for Estimation of Chlorine Demand of Water
ASTM B 764 : 2004 : R2014 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM D 3335 : 1985 : REV A : R2014 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM F 3188 : 2016 Standard Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials
ASTM D 6890 : 2018 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3694 : 1996 : R2017 Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
ASTM D 5391 : 2014 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023)
ASTM D 3256 : 1986 : R2014 Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
ASTM D 1943 : 2005 : R2012 Standard Test Method for Alpha Particle Radioactivity of Water
ASTM D 4809 : 2018 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 4185 : 2017 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM D 233 : 2013 : R2017 Standard Test Methods of Sampling and Testing Turpentine
ASTM G 106 : 1989 : R2015 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
ASTM E 649 : 2017 : REV A Standard Test Method for Bromine in Chlorine
ASTM D 1696 : 1995 : R2011 Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
ASTM E 1064 : 2016 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 1160 : 2018 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM B 680 : 1980 : R2014 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
ASTM D 4929 : 2017 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D 2035 : 2019 Standard Practice for Coagulation-Flocculation Jar Test of Water
ASTM D 7884 : 2013 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
ASTM E 581 : 2017 : REV A Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
ASTM D 6562 : 2012 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
ASTM D 6888 : 2016 Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM D 2908 : 1991 : R2017 Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
ASTM D 8087 : 2018 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry
ASTM C 1308 : 2008 : R2017 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
ASTM D 283 : 2013 : R2019 Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
ASTM D 4192 : 2015 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
ASTM E 2275 : 2014 Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance
ASTM E 1883 : 2002 : R2015 Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique
ASTM D 6971 : 2009 : R2014 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM C 146 : 1994 : REV A : R2014 Standard Test Methods for Chemical Analysis of Glass Sand
ASTM D 6329 : 1998 : R2015 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM D 6234 : 2013 Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
ASTM C 867 : 1994 : R2014 Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
ASTM F 2109 : 2001 : R2017 Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
ASTM E 2315 : 2016 Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure
ASTM G 32 : 2016 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM F 519 : 2018 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
ASTM D 1292 : 2015 Standard Test Method for Odor in Water
ASTM D 7319 : 2017 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7773 : 2012 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO<inf>3 </inf>) Using Filter Sampling and Suppressed Ion Chromatography
ASTM D 7563 : 2010 : R2016 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
ASTM F 3208 : 2018 Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices
ASTM D 6741 : 2010 : R2015 Standard Test Methods for Silanes Used in Rubber Formulations <brk/>(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
ASTM D 5386 : 2016 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D 1266 : 2018 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 808 : 2016 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) (Withdrawn 2021)
ASTM D 8026 : 2016 Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D 6414 : 2014 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
ASTM E 342 : 2011 : R2016 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
ASTM D 5086 : 2001 : R2013 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM C 187 : 2016 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
ASTM F 1110 : 2009 : R2014 Standard Test Method for Sandwich Corrosion Test
ASTM E 508 : 2013 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM D 3974 : 2009 : R2015 Standard Practices for Extraction of Trace Elements from Sediments
ASTM D 870 : 2015 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
ASTM D 5095 : 1991 : R2013 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
ASTM E 776 : 2016 Standard Test Method for Determination of Forms of Chlorine in Refuse-Derived Fuel
ASTM F 2529 : 2013 Standard Guide for <emph type="bdit">in vivo</emph> Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM)
ASTM D 5452 : 2012 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM E 2042/E2042M : 2009 : R2016 Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
ASTM E 200 : 2016 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM D 7603 : 2013 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils (Withdrawn 2022)
ASTM D 6561 : 2006 : R2016 Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace
ASTM D 2248 : 2001 : REV A : R2018 Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 4274 : 2016 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
ASTM D 7202 : 2015 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D 7245 : 2009 : R2014 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
ASTM D 5464 : 2016 Standard Test Method for pH Measurement of Water of Low Conductivity
ASTM G 142 : 1998 : R2016 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
ASTM D 5184 : 2012 : R2017 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D 3228 : 2008 : R2019 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM E 1116 : 1998 : R2014 Standard Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates
ASTM D 629 : 2015 Standard Test Methods for Quantitative Analysis of Textiles (Withdrawn 2024)
ASTM E 1228 : 2017 Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure
ASTM D 7975 : 2014 Standard Test Method for Determination of Vapor Pressure of Crude Oil: <brk/>VPCR<inf >x</inf>-F(Tm°C)(Manual Expansion Field Method)
ASTM D 5072 : 2009 : R2016 Standard Test Method for Radon in Drinking Water
ASTM D 3373 : 2017 Standard Test Method for Vanadium in Water
ASTM D 2369 : 2010 : R2015 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM D 5788 : 1995 : R2017 Standard Guide for Spiking Organics into Aqueous Samples
ASTM E 2197 : 2017 : EDT 1 Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals
ASTM E 1758 : 2001 : R2015 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM C 1473 : 2011 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
ASTM D 859 : 2016 Standard Test Method for Silica in Water
ASTM D 4739 : 2017 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D 7191 : 2018 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
ASTM D 6332 : 2012 : R2017 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D 715 : 1986 : R2014 Standard Test Methods for Analysis of Barium Sulfate Pigment
ASTM D 2162 : 2017 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM D 3875 : 2015 Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines
ASTM D 8031 : 2016 Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
ASTM D 4191 : 2015 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
ASTM C 1752 : 2017 Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges
ASTM D 3804 : 2002 : R2014 Standard Test Method for Iron in Paint Driers by EDTA Method
ASTM C 813 : 1990 : R2014 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM E 299 : 2017 : REV A Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
ASTM D 4199 : 1982 : R2011 Standard Test Methods for Autoclavability of Membrane Filters (Withdrawn 2020)
ASTM D 6889 : 2003 : R2017 Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
ASTM D 7284 : 2013 : R2017 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
ASTM E 1366 : 2011 : R2016 Standard Practice for Standardized Aquatic Microcosms: Fresh Water
ASTM D 1091 : 2011 : R2016 Standard Test Methods for Phosphorus in Lubricating Oils and Additives (Withdrawn 2021)
ASTM B 733 : 2015 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
ASTM C 698 : 2016 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O<inf>2</inf>)
ASTM E 1659 : 2012 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet (Withdrawn 2021)
ASTM D 7035 : 2016 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 3450 : 2015 Standard Test Method for Washability Properties of Interior Architectural Coatings
ASTM D 1246 : 2016 Standard Test Method for Bromide Ion in Water
ASTM E 337 : 2015 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM D 5752 : 2010 : R2017 Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
ASTM D 1283 : 2005 : R2013 Standard Test Method for Alkali-Solubility of Wools (Withdrawn 2022)
ASTM C 1875 : 2018 Standard Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
ASTM D 1881 : 2017 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 6301 : 2013 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water
ASTM D 2093 : 2003 : R2017 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
ASTM E 2913/E2913M : 2019 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
ASTM D 1123 : 1999 : R2015 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 1492 : 2013 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
ASTM D 5315 : 2004 : R2017 : EDT 1 Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization
ASTM D 6130 : 2011 : R2018 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 7328 : 2017 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM C 1285 : 2014 Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
ASTM D 3339 : 2012 : R2017 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
ASTM D 3988 : 2005 : R2017 Standard Test Method for Vanadium in Paint Driers by EDTA Method
ASTM C 1816 : 2016 Standard Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis
ASTM D 4661 : 2018 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
ASTM D 4399 : 2005 : R2017 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D 5795 : 2016 Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
ASTM D 3230 : 2019 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 7599 : 2016 : R2017 Standard Test Method for Determination of Diethanolamine, Triethanolamine, <emph type="ital">N</emph>-Methyldiethanolamine and <emph type="ital">N</emph >-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM F 502 : 2008 : R2019 Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
ASTM D 1886 : 2014 Standard Test Methods for Nickel in Water
ASTM E 393 : 2013 Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
ASTM E 104 : 2002 : R2012 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
ASTM D 2086 : 2008 : R2012 Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde (Withdrawn 2021)
ASTM G 140 : 2002 : R2014 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
ASTM F 2075 : 2015 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
ASTM G 162 : 2018 Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
ASTM D 5245 : 2019 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D 3880/D3880M : 1990 : R2017 Standard Test Method for Asbestos Strength Units (Withdrawn 2022)
ASTM D 7303 : 2017 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 3871 : 1984 : R2017 Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
ASTM D 4310 : 2010 : R2015 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
ASTM D 5997 : 2015 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM C 1475 : 2017 Standard Guide for Determination of Neptunium-237 in Soil
ASTM E 777 : 2017 : REV A Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM D 7490 : 2013 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM D 1512 : 2015 : REV B Standard Test Methods for Carbon Black—pH Value
ASTM D 4301 : 2005 : R2013 Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
ASTM D 7598 : 2016 : R2017 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 3561 : 2016 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D 3860 : 1998 : R2014 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D 445 : 2019 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 8018 : 2015 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D 891 : 2018 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D 7881 : 2013 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
ASTM D 2711 : 2017 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
ASTM D 4193 : 2008 : R2013 : EDT 1 Standard Test Method for Thiocyanate in Water
ASTM E 1115 : 2011 : R2017 Standard Test Method for Evaluation of Surgical Hand Scrub Formulations
ASTM D 4877 : 2014 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
ASTM G 127 : 2015 Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems
ASTM C 1109 : 2010 : R2015 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 7427 : 2016 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
ASTM E 1726 : 2016 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 316 : 2017 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
ASTM D 2187 : 2017 Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
ASTM D 4856 : 2011 : R2016 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
ASTM D 1726 : 2011 : R2019 Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
ASTM E 394 : 2015 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM D 4646 : 2016 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM D 5806 : 1995 : R2017 Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
ASTM D 4323 : 2015 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
ASTM D 512 : 2012 Standard Test Methods for Chloride Ion In Water (Withdrawn 2021)
ASTM D 7590 : 2009 : R2014 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
ASTM E 1910/E1910M : 2015 Standard Test Method for Agricultural pH Control Agents, Measurement of pH Change and Buffering Capacity
ASTM D 460 : 1991 : R2014 Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products (Withdrawn 2023)
ASTM F 1546 : 1996 : R2018 Standard Specification for Fire Hose Nozzles
ASTM D 6855 : 2017 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
ASTM D 5954 : 1998 : R2014 : EDT 1 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
ASTM D 5196 : 2006 : R2018 Standard Guide for Bio-Applications Grade Water
ASTM C 1638 : 2006 : R2013 Standard Guide for the Determination of Iodine-129 In Uranium Oxide (Withdrawn 2021)
ASTM D 5919 : 1996 : R2017 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM C 1128 : 2018 Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ASTM E 359 : 2017 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
ASTM D 7451 : 2016 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
ASTM E 878 : 2012 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
ASTM D 6423 : 2019 Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM D 8025 : 2016 Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
ASTM C 1152/C1152M : 2004 : R2012 : EDT 1 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
ASTM C 807 : 2018 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
ASTM E 246 : 2010 : R2015 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
ASTM D 2913 : 2014 Standard Test Method for Mercaptan Content of the Atmosphere
ASTM D 3651 : 2016 Standard Test Method for Barium in Brackish Water, Seawater, and Brines
ASTM E 165/E165M : 2018 Standard Practice for Liquid Penetrant Testing for General Industry
ASTM D 3987 : 2012 Standard Practice for Shake Extraction of Solid Waste with Water
ASTM D 3989 : 2001 : R2012 Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
ASTM D 3869 : 2015 Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
ASTM D 3125 : 2006 : R2012 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid (Withdrawn 2021)
ASTM C 760 : 1990 : R2015 Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
ASTM D 8024 : 2016 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM E 3190 : 2019 Standard Practice for Preparation of Fixed Radiological/Surrogate Contamination on Porous Test Coupon Surfaces for Evaluation of Decontamination Techniques
ASTM D 4785 : 2008 : R2013 : EDT 1 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
ASTM C 696 : 2011 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
ASTM D 7591 : 2012 : R2017 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 4662 : 2015 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
ASTM D 6208 : 2007 : R2014 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM D 5232 : 2013 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM F 331 : 2013 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
ASTM D 1722 : 2009 : R2017 Standard Test Method for Water Miscibility of Water-Soluble Solvents
ASTM D 5241 : 1992 : R2017 Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water
ASTM D 7600 : 2016 : R2017 Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 3558 : 2015 Standard Test Methods for Cobalt in Water
ASTM D 3891 : 2008 : R2019 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D 7622 : 2010 : R2015 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM C 1387 : 2014 Standard Guide for the Determination of Technetium-99 in Soil
ASTM D 500 : 1995 : R2016 Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
ASTM F 311 : 2008 : R2013 Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM D 1739 : 1998 : R2017 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM D 3970 : 2005 : R2017 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
ASTM D 3792 : 2016 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM E 1915 : 2013 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
ASTM D 7170 : 2016 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019)
ASTM D 5902 : 2005 : R2015 Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM D 6280 : 1998 : R2014 Standard Specification for Zinc Phosphate Pigments
ASTM E 1754 : 2017 : REV A Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM D 4636 : 2017 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ASTM G 189 : 2007 : R2013 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
ASTM D 3154 : 2014 Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
ASTM E 354 : 2014 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM D 974 : 2014 : EDT 2 Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D 4519 : 2016 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM C 791 : 2019 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
ASTM D 5836 : 2008 : R2013 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
ASTM D 3352 : 2015 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
ASTM D 6784 : 2016 Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
ASTM D 820 : 1993 : R2016 Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM C 1205 : 2007 : R2012 Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
ASTM D 7876 : 2013 : R2018 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
ASTM D 4764 : 2001 : R2016 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM D 7614 : 2012 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
ASTM D 3231 : 2018 Standard Test Method for Phosphorus in Gasoline
ASTM D 7066 : 2004 : R2017 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM D 1318 : 2016 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
ASTM C 1561 : 2010 : R2016 Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry
ASTM E 775 : 2015 Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
ASTM D 4423 : 2010 : R2015 Standard Test Method for Determination of Carbonyls in C<inf>4</inf> Hydrocarbons
ASTM F 2129 : 2019 : REV A Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM D 1608 : 2016 Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) (Withdrawn 2023)
ASTM E 463 : 2014 : REV A Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry
ASTM D 932 : 2015 Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits
ASTM D 4481 : 2010 : R2015 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D 1045 : 2014 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM D 5890 : 2019 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
ASTM D 6385 : 1999 : R2017 Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing
ASTM D 5673 : 2016 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
ASTM D 2194 : 2002 : R2012 Standard Test Method for Concentration of Formaldehyde Solutions (Withdrawn 2021)
ASTM D 6794 : 2019 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
ASTM D 6349 : 2013 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM G 202 : 2012 : R2016 Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM D 3242 : 2011 : R2017 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 4291 : 2004 : R2017 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil
ASTM D 7485 : 2016 Standard Test Method for Determination of Nonylphenol, p-<emph type="bdit">tert</emph >-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM E 1518 : 2005 : R2012 Standard Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic Shaker Method
ASTM D 7548 : 2016 : REV A Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
ASTM E 321 : 1996 : R2012 Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)
ASTM D 7742 : 2017 Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 4607 : 2014 Standard Test Method for Determination of Iodine Number of Activated Carbon
ASTM E 223 : 2016 Standard Test Methods for Analysis of Sulfuric Acid
ASTM D 909 : 2018 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM F 619 : 2014 Standard Practice for Extraction of Medical Plastics
ASTM D 4337 : 1989 : R2017 Standard Test Methods for Analysis of Linear Detergent Alkylates
ASTM D 7704 : 2016 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
ASTM D 6333 : 2017 Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors
ASTM D 5768 : 2002 : R2018 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM C 1009 : 2013 : REV A Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
ASTM D 2580 : 2006 : R2012 Standard Test Method for Phenols in Water by Gas-Liquid Chromatography (Withdrawn 2021)
ASTM D 665 : 2014 : EDT 1 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
ASTM D 3608 : 2019 Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
ASTM E 248 : 2012 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry
ASTM D 852 : 2016 Standard Test Method for Solidification Point of Benzene
ASTM D 5056 : 2017 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D 2492 : 2002 : R2012 Standard Test Method for Forms of Sulfur in Coal (Withdrawn 2021)
ASTM D 2332 : 2013 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM F 2832 : 2011 : R2016 Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
ASTM C 1817 : 2016 Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O<inf>2</inf>) Pellets by Gravimetry
ASTM D 6698 : 2014 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water (Withdrawn 2023)
ASTM D 5996 : 2016 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 1570 : 1995 : R2016 Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
ASTM E 2823 : 2017 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
ASTM D 3598 : 1989 : R2016 Standard Test Method for Citrate in Synthetic Detergents
ASTM A 262 : 2015 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM D 7304 : 2016 Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC
ASTM E 2408 : 2004 : R2015 Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
ASTM D 5263 : 2015 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
ASTM G 186 : 2005 : R2016 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
ASTM G 121 : 2018 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM D 3978 : 2004 : R2012 Standard Practice for Algal Growth Potential Testing with <i>Pseudokirchneriella subcapitata</i>
ASTM D 6553 : 2000 : R2016 Standard Test Method for Coolant Compatibility of Way Lubricants
ASTM D 1293 : 2018 Standard Test Methods for pH of Water
ASTM E 2314 : 2003 : R2014 Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test) (Withdrawn 2021)
ASTM D 3634 : 1999 : R2015 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1926 : 2000 : R2011 Standard Test Methods for Carboxyl Content of Cellulose
ASTM D 7065 : 2017 Standard Test Method for Determination of Nonylphenol, Bisphenol A, <emph type="bdit" >p-tert</emph>-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
ASTM C 25 : 2019 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
ASTM D 7318 : 2019 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 4198 : 1982 : R2011 Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth (Withdrawn 2020)
ASTM B 995 : 2015 : REV A Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)
ASTM D 2284 : 2011 Standard Test Method for Acidity of Sulfur Hexafluoride
ASTM D 7855/D7855M : 2013 : R2017 Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM D 4327 : 2017 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 3973 : 1985 : R2017 Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
ASTM E 439 : 2017 Standard Test Methods for Chemical Analysis of Beryllium
ASTM D 4190 : 2015 Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy
ASTM D 6504 : 2011 : R2016 : EDT 1 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
ASTM D 126 : 1987 : R2019 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
ASTM C 1502 : 2016 Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide
ASTM D 5910 : 2005 : R2019 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
ASTM D 5051 : 2006 : R2017 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
ASTM D 5905 : 1998 : R2018 Standard Practice for the Preparation of Substitute Wastewater
ASTM C 1038/C1038M : 2014 : REV B Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM C 1096/C1096M : 2007 : R2019 Standard Test Method for Determination of Wood Fiber in Asbestos Cement (Withdrawn 2022)
ASTM E 2362 : 2015 Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection
ASTM E 1835 : 2014 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM E 3061 : 2017 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
ASTM D 1782 : 2017 Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D 8150 : 2017 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D 5317 : 1998 : R2017 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
ASTM D 6363 : 1998 : R2013 Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
ASTM D 7623 : 2010 : R2015 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM F 3306 : 2019 Standard Test Method for Ion Release Evaluation of Medical Implants
ASTM D 2331 : 2008 : R2013 Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
ASTM C 1111 : 2010 : R2015 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM C 1122/C1122M : 1990 : R2015 Standard Test Method for Wet Volume of Asbestos (Withdrawn 2021)
ASTM E 1070 : 2017 : REV A Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
ASTM D 5259 : 2019 Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM D 7820 : 2012 Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
ASTM D 2674 : 1972 : R2012 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
ASTM D 5863 : 2000 : REV A : R2016 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D 6239 : 2009 : R2015 Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry (Withdrawn 2024)
ASTM D 858 : 2017 Standard Test Methods for Manganese in Water
ASTM D 4200 : 1982 : R2011 Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
ASTM D 4377 : 2000 : R2011 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020)
ASTM D 3120 : 2008 : R2019 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4017 : 2002 : R2015 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D 2352 : 1985 : R2015 Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints (Withdrawn 2023)
ASTM D 1735 : 2014 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 3483 : 2014 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
ASTM B 604 : 1991 : R2015 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
ASTM D 5412 : 1993 : R2017 : EDT 1 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM D 5797 : 2018 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
ASTM D 3280 : 1985 : R2014 Standard Test Methods for Analysis of White Zinc Pigments
ASTM D 3341 : 2016 Standard Test Method for Lead in Gasoline—Iodine Monochloride Method (Withdrawn 2022)
ASTM D 6501 : 2015 Standard Test Method for Phosphonate in Brines
ASTM D 6143 : 2018 Standard Test Method for Iron Content of Bisphenol A (4,4<emph type="bdit">′</emph > - Isopropylidenediphenol)
ASTM D 7873 : 2013 : R2017 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
ASTM D 1067 : 2016 Standard Test Methods for Acidity or Alkalinity of Water
ASTM C 1287 : 2018 Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry
ASTM D 4450 : 1985 : R2012 Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment
ASTM D 6266 : 2000 : REV A : R2017 Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D 5198 : 2017 Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM E 611 : 2008 : R2015 : EDT 1 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography (Withdrawn 2020)
ASTM D 3237 : 2017 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D 7597 : 2016 : R2017 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 6057 : 1996 : R2011 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy (Withdrawn 2020)
ASTM E 1613 : 2012 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
ASTM D 3943 : 2010 : R2015 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM C 1324 : 2015 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
ASTM D 4289 : 2013 : R2014 : EDT 1 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 7638 : 2010 : R2015 Standard Test Method for Determination of Fatty Acids and Esters in Glycerin
ASTM C 1463 : 2019 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
ASTM D 521 : 2002 : R2019 Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
ASTM D 7961 : 2017 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
ASTM E 1963 : 2009 : R2014 Standard Guide for Conducting Terrestrial Plant Toxicity Tests
ASTM C 266 : 2018 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
ASTM D 7731 : 2017 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM G 122 : 1996 : R2015 : EDT 1 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM D 2885 : 2019 : REV A Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 1688 : 2017 Standard Test Methods for Copper in Water
ASTM A 1032 : 2015 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
ASTM F 746 : 2004 : R2014 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
ASTM D 3723 : 2005 : R2017 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM D 3643 : 2015 Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
ASTM D 4547 : 2015 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM D 2191 : 2006 : R2012 Standard Test Method for Acetaldehyde Content of Vinyl Acetate (Withdrawn 2021)
ASTM D 2914 : 2015 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
ASTM D 1141 : 1998 : R2013 Standard Practice for the Preparation of Substitute Ocean Water
ASTM D 1686 : 2019 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D 2023 : 1989 : R2016 Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
ASTM E 1786 : 2017 : REV A Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E 1439 : 2012 : R2019 Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX)
ASTM E 1766 : 2015 Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices (Withdrawn 2023)
ASTM D 2460 : 2007 : R2013 Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water (Withdrawn 2022)
ASTM G 100 : 1989 : R2015 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM E 70 : 2007 : R2015 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
ASTM B 555 : 1986 : R2018 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
ASTM D 4252 : 1989 : R2017 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
ASTM D 5155 : 2014 : EDT 1 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
ASTM D 3155 : 2011 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures (Withdrawn 2020)
ASTM D 4084 : 2007 : R2017 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
ASTM D 4642 : 2004 : R2016 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM E 1898 : 2013 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM C 799 : 2019 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
ASTM D 4130 : 2015 Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines (Withdrawn 2024)
ASTM D 6238 : 1998 : R2017 Standard Test Method for Total Oxygen Demand in Water
ASTM D 7098 : 2008 : R2015 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D 5044 : 2006 : R2017 Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
ASTM C 1797 : 2017 Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
ASTM C 1012/C1012M : 2018 : REV B Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
ASTM D 4042 : 1993 : R2014 Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
ASTM D 444 : 1988 : R2014 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM D 1252 : 2006 : R2012 : EDT 1 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
ASTM G 136 : 2003 : R2016 : EDT 1 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
ASTM G 157 : 1998 : R2018 Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
ASTM D 6281 : 2015 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
ASTM D 1844 : 1986 : R2014 Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate
ASTM F 1115 : 2016 Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
ASTM D 5708 : 2015 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D 6974 : 2016 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM E 1600 : 2015 Standard Test Methods for Determination of Gold in Cyanide Solutions
ASTM D 7262 : 2010 : R2016 : EDT 1 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
ASTM E 247 : 2001 : R2015 : EDT 1 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM D 8193 : 2018 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
ASTM D 5029 : 1998 : R2014 Standard Test Method for Water Solubles in Activated Carbon
ASTM D 2119 : 2019 Standard Test Method for Aldehydes in Styrene Monomer
ASTM D 6052 : 1997 : R2016 Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM G 187 : 2018 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

ASTM D 5128 : 2014 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM F 1094 : 1987 : R1999 Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 6071 : 2014 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D 1129 : 2013 : REDLINE Standard Terminology Relating to Water
ASTM D 1129 : 2003 Standard Terminology Relating to Water
ASTM D 6161 : 1998 Standard Terminology Used for Crossflow Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes
ASTM D 4517 : 2004 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D 5542 : 2004 : R2009 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 6161 : 2019 Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes
ASTM D 5391 : 2014 : REDLINE Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023)
ASTM D 1129 : 2013 Standard Terminology Relating to Water
ASTM D 1129 : 2013 : R2020 Standard Terminology Relating to Water
ASTM D 6529 : 2011 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50<span class='unicode'>–</span>1000 <span class='unicode'>μ</span>S/cm (Withdrawn 2020)
ASTM D 5391 : 2023 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D 1129 : 2013 : R2020 : EDT 2 Standard Terminology Relating to Water
ASTM D 5997 : 1996 : R2009 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D 5173 : 1997 : R2001 Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both or by High Temperature Combustion Followed by Gas Phase NDIR or by Electrolytic Conductivity
ASTM F 1094 : 1987 : R2005 Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 1125 : 2014 Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023)
ASTM D 5997 : 2015 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D 6529 : 2022 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50 μS/cm to 1000 μS/cm
ASTM D 5128 : 1990 : R2005 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D 1129 : 2006 Standard Terminology Relating to Water
ASTM D 5997 : 1996 : R2000 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D 4453 : 2002 Standard Practice for Handling of Ultra-Pure Water Samples
ASTM D 5997 : 1996 : R2005 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D 5173 : 2015 : REDLINE Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
ASTM D 4453 : 2017 : REDLINE Standard Practice for Handling of High Purity Water Samples
ASTM D 4517 : 2015 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D 6071 : 2006 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D 1129 : 2013 : R2020 : EDT 1 Standard Terminology Relating to Water
ASTM D 1129 : 1999 : REV A Standard Terminology Relating to Water
ASTM D 5245 : 2019 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D 1129 : 2006 : REV A Standard Terminology Relating to Water
ASTM D 5391 : 1999 : R2005 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D 5245 : 1992 : R2005 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D 5391 : 1999 : R2009 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D 6071 : 1996 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D 1129 : 2003 : REV A Standard Terminology Relating to Water
ASTM D 1129 : 2002 Standard Terminology Relating to Water
ASTM D 6071 : 2014 : REDLINE Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D 5128 : 2014 : REDLINE Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D 5542 : 2016 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 5245 : 1992 : R1998 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D 5173 : 1997 : R2007 Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both, or by High Temperature Combustion Followed by Gas Phase NDIR or by Electrolytic Conductivity
ASTM D 1293 : 1999 Standard Test Methods for pH of Water
ASTM E 351 : 2018 : REDLINE Standard Test Methods for Chemical Analysis of Cast Iron—All Types
ASTM D 4453 : 1991 : R1997 Standard Practice for Handling of Ultra-Pure Water Samples
ASTM D 6529 : 2000 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50-1000 uS/cm (Withdrawn 2009)
ASTM D 5391 : 2014 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023)
ASTM D 1125 : 1995 : R1999 Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM D 5245 : 1992 : R2012 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D 1293 : 1999 : R2005 Standard Test Methods for pH of Water
ASTM D 1129 : 2004 Standard Terminology Relating to Water
ASTM D 5128 : 1990 : R1999 : EDT 1 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D 6161 : 2005 Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes
ASTM D 1293 : 2018 Standard Test Methods for pH of Water
ASTM D 5542 : 1994 : R1999 : EDT 1 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 6071 : 2013 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D 5542 : 2016 : REDLINE Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 5542 : 2004 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 1125 : 2014 : REDLINE Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023)
ASTM D 1129 : 2002 : REV A Standard Terminology Relating to Water
ASTM D 5173 : 2015 : R2023 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
ASTM D 4517 : 2015 : REDLINE Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D 1125 : 1995 : R2005 Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM D 4453 : 2017 Standard Practice for Handling of High Purity Water Samples
ASTM D 1125 : 2023 Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM D 4517 : 1985 : R1999 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D 5997 : 2015 : REDLINE Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM F 1094 : 1987 : R2012 Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 4453 : 2002 : R2006 Standard Practice for Handling of Ultra-Pure Water Samples
ASTM D 1293 : 2012 Standard Test Methods for pH of Water
ASTM D 1129 : 2010 Standard Terminology Relating to Water
ASTM D 5128 : 2014 : R2022 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D 4453 : 2011 Standard Practice for Handling of High Purity Water Samples
ASTM D 6161 : 2010 Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes (Withdrawn 2019)
ASTM D 5173 : 2015 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
ASTM D 5128 : 2009 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D 1129 : 2006 : REV A : EDT 1 Standard Terminology Relating to Water
ASTM D 5391 : 1999 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D 1129 : 2001 Standard Terminology Relating to Water
ASTM D 1129 : 2004 : EDT 1 Standard Terminology Relating to Water
ASTM D 4517 : 2015 : R2023 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D 1125 : 1995 : R2009 Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM D 6071 : 2014 : R2022 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D 4517 : 2004 : R2009 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D 1293 : 1984 : R1990 Standard Test Methods for pH of Water
ASTM D 4453 : 2016 Standard Practice for Handling of High Purity Water Samples

View more information
£52.59
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.