• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 297 : 2015 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Methods for Rubber Products—Chemical Analysis
Available format(s)

PDF

Superseded date

22-01-2022

Language(s)

English

Published date

01-07-2015

CONTAINED IN VOL. 09.01, 2015 Defines the qualitative and quantitative analysis of the composition of rubber products of the 'R' family.

1.1These test methods cover the qualitative and quantitative analysis of the composition of rubber products of the “R” family (see 3.1). Many of these test methods may be applied to the analysis of natural and synthetic crude rubbers.

1.1.1Part Aconsists of general test methods for use in the determination of some or all of the major constituents of a rubber product.

1.1.2Part Bcovers the determination of specific polymers present in a rubber product.

1.1.3The test methods appear in the following order:

Part A. General Test Methods:

Sections

Rubber Polymer Content by the Indirect Method

11 – 13

Determinations and Report for the General Method

14 and 15

Density

16

Extract Analysis

17 – 26

Sulfur Analysis

27 – 33

Fillers Analysis

34 – 40

Ash Analysis

41 – 51

Part B. Determination of Rubber Polymers

52 – 58

1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary or warning statements are given in 31.4.5, 31.6, 37.4.2, 38.4.2, 45.1.3, 53.2.3.5, 54.4.2, 54.6, 56.5.3, and 57.7.3; and X1.3.3 and X2.4.1.6.

Committee
D 11
DevelopmentNote
Supersedes ASTM D 834 (12/2001)
DocumentType
Redline
Pages
48
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

Standards Relationship
UNE 53562:1974 Identical
UNE 53563:1974 Identical

API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
SAE AMS 7254 : 2014 PERFLUOROETHER ELASTOMER
SAE AMS 3331 : 2017 ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 65 - 75 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS
DDD-C-001799 Base Document:1972 CARPET, SQUARES, PILE SURFACE, TILE TYPE, WITH OR WITHOUT ATTACHED CUSHION
SAE AMS 3210 : 2017 CHLOROPRENE (CR) RUBBER ELECTRICAL RESISTANT 65 - 75
MIL G 12223 : J GLOVES, TOXICOLOGICAL AGENTS PROTECTIVE
SAE AMS 3357 : 2003 RUBBER, SILICONE (VMQ) - LUBRICATING OIL AND COMPRESSION SET RESISTANT, 65-75
CSA Z259.7 : 0 RUBBER INSULATING LINE HOSE
ASTM D 5774 : 1995 : R2000 Standard Test Methods for Rubber From Synthetic Sources-Chemical Analysis of Extractables
MIL-B-41816 Revision H:1990 BOOTS, COLD WEATHER, INSULATED, RUBBER (WET-COLD; DRY-EXTREME COLD)
MIL-R-6130 Revision C:1980 RUBBER, CELLULAR, CHEMICALLY BROWN
SAE AMS 3217 : 2016 STANDARD ELASTOMER STOCKS, TEST SLABS
MIL-DTL-85052 Revision B:2005 CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR
SAE AMS R 83485 : 2014 RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES
SAE AMS 3227 : 2013 ACRYLONITRILE BUTADIENE (NBR) RUBBER, HOT OIL AND COOLANT RESISTANT, LOW SWELL, 55-65
ZZ-R-765 Revision E:1991 RUBBER, SILICONE; RUBBER SHEET SOLID
UNI EN ISO 23936-2 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
SAE AMS R 6130 : 2001 RUBBER, CELLULAR, CHEMICALLY BLOWN
ASTM D 6370 : 1999 : R2003 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
SAE AMS 7259 : 2013 RUBBER: FLOUROCARBON (FKM), HIGH TEMPERATURE/FLUID RESISTANT, LOW COMPRESSION SET/85 TO 95 HARDNESS, FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS
MIL-C-8603 Revision B:1984 CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT
SAE AMS 3332 : 2015 SILICONE RUBBER, EXTREME LOW-TEMPERATURE RESISTANT, 15 - 30
MIL H 28693 : 0 HOSE, RUBBER, OIL & GASOLINE DISCHARGE, SMOOTH BORE, LIGHTWEIGHT BUOYANT TYPE, LONGITUDINALLY REINFORCED, 6 INCH
ASTM D 1414 : 2015 : REDLINE Standard Test Methods for Rubber O-Rings
AASHTO M 261 : 1996 SPECIFICATION FOR RIB-TREAD STANDARD TIRE FOR SPECIAL-PURPOSE PAVEMENT FRICTIONAL-PROPERTY TESTS
SAE AMS R 25988 : 2017 RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES
SAE AMS 3337 : 2018 SILICONE (PVMQ) RUBBER - EXTREME-LOW-TEMPERATURE RESISTANT, 65-75
SAE AMS 3304 : 2016 SILICONE RUBBER, GENERAL PURPOSE, 70 DUROMETER
FSA PSJ 703 : 2011 GUIDELINES FOR ELASTOMERS USED IN PIPING SYSTEMS NON-METALLIC EXPANSION JOINTS
SAE AMS 3216 : 2017 ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE - FLUID RESISTANT LOW COMPRESSION SET 70 TO 80
ASTM D 1050 : 2005 : R2011 Standard Specification for Rubber Insulating Line Hose
ASTM D 1050 : 2005 : R2017 Standard Specification for Rubber Insulating Line Hose
ASTM C 990 : 2009 : R2014 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
ASTM D 3452 : 2006 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
ASTM D 5963 : 2004 : R2010 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
ASTM D 1049 : 1998 : R2002 Standard Specification for Rubber Insulating Covers
ASTM D 5774 : 1995 : R2014 Standard Test Methods for Rubber—Chemical Analysis of Extractables
ASTM E 1844 : 2008 Standard Specification for A Size 10 <span class='unicode'>×</span> 4<span class='unicode'>–</span>5 Smooth-Tread Friction Test Tire
ASTM D 5603 : 2001 : R2015 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
ASTM D 7999 : 2015 Standard Classification for Rubber Products in Natural Gas Pipeline Applications
SAE J 2884 : 2014 THERMOSET ELASTOMER SPECIFICATION SYSTEM
ASTM D 1416 : 1989 Test Methods for Rubber from Synthetic Sources--Chemical Analysis (Withdrawn 1996)
SAE AMS 3217/1 : 2013 TEST SLABS, ACRYLONITRILE BUTADIENE (NBR-H) - MEDIUM-HIGH ACRYLONITRILE, 65-75
ASTM D 3452 : 2006 : R2017 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
SAE AMS 3240 : 2011 CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45
PD ISO/TS 16096:2014 Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure
ASTM D 5774 : 1995 : R2004 : EDT 1 Standard Test Methods for Rubber From Synthetic Sources-Chemical Analysis of Extractables
A-A-1936 Revision A:1996 ADHESIVES, CONTACT, NEOPRENE RUBBER
ASTM E 524 : 2008 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
MIL C 915 : F CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR
SAE AMS7338A : 2013 RUBBER: BUTYL (IIR ABBREVIATION), PHOSPHATE ESTER RESISTANT, 65 TO 75 HARDNESS, FOR SEALS IN HYDRAULIC SYSTEMS, ETC.
SAE AMS 3329 : 2017 ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45-55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS
BS 7164-23.1:1993 Chemical tests for raw and vulcanized rubber. Methods for determination of total sulfur content Oxygen combustion flask method
ASTM D 5644 : 2001 : R2013 Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D 7567 : 2009 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction (Withdrawn 2015)
DDD-C-001630 Base Document:1973 CARPETS AND RUGS, EXTRA HEAVY PILE WEIGHT, WOVEN, TUFTED AND CUSTOM TUFTED SPECIAL PURPOSE
A-A-59567 Revision A:2014 HOSE AND HOSE ASSEMBLIES, RUBBER (YARN OR FABRIC REINFORCED) WATER SERVICE
ASTM D 5603 : 2001 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
ASTM D 1278 : 1991 : REV A : R2015 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
DOD-STD-35-36 Revision B:1979 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING
MIL-S-19653 Revision B:1984 SEALING COMPOUND (WOOD BEDDING), FORTIFIED
AWWA C301 : 2014 PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE
CSA Z259.8 : 0 RUBBER INSULATING COVERS
ASTM E 501 : 2008 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
SAE AMS 3301 : 2011 ELASTOMER: SILICONE RUBBER (MQ/VMQ) GENERAL PURPOSE 35 - 45 DUROMETER TYPE 'A' HARDNESS
SAE AMS 3382 : 2017 ELASTOMER: TETRAFLUOROETHYLENE/PROPYLENE (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 75 TO 90 HARDNESS
ANSI/AWWA C300 : 2016 REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE
AWWA C303 : 2017 CONCRETE PRESSURE PIPE, BAR-WRAPPED, STEEL-CYLINDER TYPE
ASTM C 990 : 2009 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
ASTM D 3452 : 2006 : R2012 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
SAE AMS R 83248 : 2005 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
I.S. EN ISO 23936-2:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011)
ASTM D 6049 : 2003 : R2008 Standard Test Method for Rubber Property-Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D 3156 : 1996 : R2001 Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
ASTM D 1049 : 1998 : R2002 : EDT 1 Standard Specification for Rubber Insulating Covers
ASTM D 6814 : 2002 : EDT 1 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM D 7106/D7106M : 2005 : R2015 : EDT 1 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
ASTM D 6814 : 2002 : R2008 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM F 2157 : 2009-02 SPECIFICATION FOR SYNTHETIC SURFACED RUNNING TRACKS
CSA Z259.4 : 0 RUBBER INSULATING GLOVES AND MITTS
ASTM D 5140 : 1995 Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004)
ASTM D 5963 : 2004 : R2010 : EDT 1 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
ASHRAE GUIDELINE 6 : 2015 REFRIGERANT INFORMATION RECOMMENDED FOR PRODUCT DEVELOPMENT AND STANDARDS
SBAC TS 170 : 5 WOVEN GLASSFIBRE CUSHION SLEEVING AND RESPECTIVE LOOP STYLE CLAMP ASSEMBLIES FOR USE AT TEMPERATURES UP TO 550 DEGREES C
SBAC TS 147 : 8 SILICONE ELASTOMER, GLASSFIBRE FABRIC REINFORCED CUSHION (FOR USE IN LOOP STYLE CLAMP ASSEMBLIES)
SAE AMS 3349 : 2014 SILICONE (VMQ) RUBBER, 1100 PSI (7.58 MPA) TENSILE STRENGTH, HIGH RESILIENCY, 65 - 75
FSA DSJ 401 : 2009 SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER
SAE AMS 3338 : 2014 SILICONE (PVMQ) RUBBER, EXTREME-LOW-TEMPERATURE RESISTANT, 75 - 85
ASTM D 5963 : 2004 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
10/30219184 DC : 0 BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
MIL-C-19002 Revision D:1985 CLOTH, COATED, & STRIP, COATED CLOTH POLYCHLOROPRENE ON NYLON
CSA Z259.6 : 0 RUBBER INSULATING BLANKETS
MIL-DTL-43976 Revision D:2003 GLOVES AND GLOVE SET, CHEMICAL PROTECTIVE
MIL-DTL-32145 Base Document:2004 NECK SEAL, FLYERS, ANTI-EXPOSURE, RUGGEDIZED
MIL C 24643 : A CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR
A-A-55063 Revision A:2012 APRON, UTILITY, IMPERMEABLE, RUBBER COATED FABRIC (GENERAL PURPOSE)
ASTM D 1278 : 1991 : REV A : R2002 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
MIL-DTL-915 Revision G:2002 CABLE, ELECTRICAL, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR
ASTM C 990M : 2009 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
ASTM D 1049 : 1998 : R2017 Standard Specification for Rubber Insulating Covers
ASTM D 1049 : 1998 : R2010 Standard Specification for Rubber Insulating Covers
SAE AMS 3242 : 2011 CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85
ASTM D 178 : 2001 Standard Specification for Rubber Insulating Matting
MIL-R-83283 Revision A:1991 RUBBER, SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE
ASTM D 6814 : 2002 : R2013 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
SAE AMS 3305 : 2014 SILICONE, RUBBER, GENERAL PURPOSE, 80 DUROMETER
ASTM D 1278 : 1991 : REV A : R1997 : EDT 1 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
SAE AMS R 7362 : 2012 NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT
ASTM D 7106 : 2005 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
ASTM E 501 : 2008 : R2015 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
SAE AMS 3215 : 2012 ACRYLONITRILE BUTADIENE (NBR) RUBBER - AROMATIC FUEL RESISTANT - 65-75
ASTM D 3156:1996 Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
ASTM D 6576 : 2013 : REDLINE Standard Specification for Flexible Cellular Rubber Chemically Blown
SAE AMS P 5315 : 2013 ACRYLONITRILE-BUTADIENE (NBR) RUBBER FOR FUEL-RESISTANT SEALS 60 TO 70
ASTM D 3156 : 1996 : R2016 Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
SAE AMS 3241 : 2011 CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 55-65
SAE AMS 3325 : 2014 FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 55 - 65 DUROMETER TYPE 'A' HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATION OILS
ASTM D 6049 : 2003 Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D 6049 : 2003 : R2017 Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM E 670 : 2009 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM D 3156 : 1996 : R2011 Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
ISO/TS 16095:2014 Reclaimed rubber derived from products containing mainly natural rubber Evaluation procedure
ASTM E 670 : 2009 : R2015 Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
SAE AMS 3238 : 2014 BUTYL (IIR) RUBBER, PHOSPHATE ESTER RESISTANT, 65-75
MIL-I-62522 Base Document:1987 INSULATION, PANEL, NOISE AND THERMAL-BARRIER
PD ISO/TS 16095:2014 Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure
MIL H 17505 : E HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE
ASTM D 178 : 2001 : EDT 1 Standard Specification for Rubber Insulating Matting
MIL-T-13020 Revision C:1971 TAPE, RUBBER UNVULCANIZED, SPLICING AND MOLDING (TAPES TO-317/U & TL-318/U).
BS EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers
SAE AMS 3226 : 2014 ACRYLONITRILE BUTADIENE (NBR) RUBBER, HOT OIL AND COOLANT RESISTANT, LOW SWELL, 45 - 55
MIL-DTL-25988 Revision C:2006 RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES
SAE AMS 3250 : 2014 SYNTHETIC RUBBER AND CORK COMPOSITION, GENERAL PURPOSE, SOFT
SAE AMS 3345 : 2015 SILICONE RUBBER, 1000 PSI (6.89 MPA) MINIMUM TENSILE STRENGTH, 45 - 55 DUROMETER
MIL-DTL-28693 Revision B:2016 Hose, Rubber, Oil and Gasoline Discharge, Smooth Bore, Lightweight Buoyant Type, Longitudinally Reinforced, 6 Inch
ASTM D 5603 : 2001 : R2008 Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber
SAE AMS 3334 : 2018 SILICONE RUBBER, EXTREME LOW-TEMPERATURE RESISTANT, 35 - 45
SAE AMS 3251 : 2014 SYNTHETIC RUBBER AND CORK COMPOSITION, GENERAL PURPOSE, MEDIUM
SAE AMS 3212 : 2014 ACRYLONITRILE BUTADIENE (NBR) RUBBER, AROMATIC FUEL RESISTANT, 55-65
ASTM D 178 : 2001 : R2005 Standard Specification for Rubber Insulating Matting
MIL G 43976 : C GLOVE & GLOVE SET, CHEMICAL PROTECTIVE
DDD-C-95 Base Document:1965 CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC
ASTM D 1278 : 1991 : REV A : R2007 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
SAE AMS 3347 : 2014 RUBBER, SILICONE 1200 PSI (8.27 MPA), HIGH MODULUS 45 - 55
SAE AMS 3346 : 2013 SILICONE RUBBER, 1000 PSI (6.89 MPA) MINIMUM TENSILE STRENGTH, 55-65 DUROMETER
SAE AMS 3328 : 2016 FLUOROSILICONE (FVMQ) RUBBER, FUEL AND OIL RESISTANT, 35-45
SAE AMS 3237 : 2000 BUTYL (IIR) RUBBER, PHOSPHATE ESTER RESISTANT, 35-45
SAE AMS 3704 : 2016 ADHESIVE, CONTACT, POLYCHLOROPRENE (CR) RUBBER, RESIN MODIFIED
ANSI/AWWA C200 : 2017 STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER
ASTM D 6370 : 1999 : R2009 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM D 1050 : 2005 Standard Specification for Rubber Insulating Line Hose
ASTM D 5963 : 2004 : R2015 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
SAE AMS 7287 : 2012 FLUOROCARBON ELASTOMER (FKM) HIGH TEMPERATURE/HTS OIL RESISTANT/FUEL RESISTANT LOW COMPRESSION SET/70 TO 80 HARDNESS, LOW TEMPERATURE TG -22 DEGREES F (-30 DEGREES C) FOR SEALS IN OIL/FUEL/SPECIFIC HYDRAULIC SYSTEMS
ASTM D 1050 : 2005 : EDT 1 Standard Specification for Rubber Insulating Line Hose
ASTM C 990M : 2009 : R2014 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011)
ASTM D 3156 : 1996 : R2005 Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
ASTM D 6049 : 2003 : R2013 Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
MIL-DTL-32237 Revision C:2016 BOOT, COMBAT, HOT WEATHER ARMY
ASTM D 5644 : 2001 Standard Test Methods for Rubber Compounding Materials&#8212Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D 3900 : 2017 : REDLINE Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
MIL-R-83248 Revision C:1994 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
MIL-C-10369 Revision D:1958 CABLE, TELEPHONE, FIELD, FOR RAPID PAYOUT (MX-306 A/G)
SAE AMS 3213 : 2017 ACRYLONITRILE BUTADIENE (NBR) RUBBER AROMATIC FUEL RESISTANT 75-85
SAE AMS R 83285 : 2011 RUBBER, ETHYLENE-PROPYLENE, GENERAL PURPOSE
ASTM E 1551 : 2016 : REDLINE Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire
SAE AMS 7274 : 2014 RUBBER: BUTADIENE-ACRYLONITRILE (NBR), 65 TO 75 HARDNESS, FOR ELASTOMERIC SEALS IN AIRCRAFT ENGINE OIL SYSTEMS
CSA Z259.5 : 0 RUBBER INSULATING SLEEVES
ASTM D 3677 : 2010 : EDT 1 Standard Test Methods for Rubber<char: emdash>Identification by Infrared Spectrophotometry
HH-P-31 Revision F:1987 PACKING AND LAGGING MATERIALS, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE
SAE AMS 3330C : 2017 ELASTOMER: FLUOROSILICONE (FVMQ) RUBBER FUEL AND OIL RESISTANT 45-55 FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS
MMM-A-182 Revision A:1967 ADHESIVE RUBBER
ASTM D 1049 : 1998 Standard Specification for Rubber Insulating Covers
MIL-DTL-17505 Revision G:2014 HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE
MIL-A-87134 Base Document:1978 ADHESIVE, CONTACT, FOR CUSTOM FIT HELMET LINERS
MIL-C-17415 Revision F:1989 CLOTH, COATED, AND WEBBING, INFLATABLE BOAT AND MISCELLANEOUS USE
MIL R 25988 : B RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES
SAE AMS 7257 : 2014 PERFLUOROCARBON (FFKM) ENGINE OIL, FUEL AND HYDRAULIC FLUID RESISTANT 70 TO 80 HARDNESS FOR HIGH TEMPERATURE SEALS IN ENGINE OIL SYSTEMS, FUEL SYSTEMS AND HYDRAULIC SYSTEMS
GG-C-1320 Revision B:1985 CUP, POLISHING, DENTAL HANDPIECE (SCREW STEM)
MIL-DTL-45301 Revision E:1998 TREAD ELASTOMER: SOLID TIRE, FOR TRACK LAYING VEHICLES
ASTM D 178 : 2001 : R2010 Standard Specification for Rubber Insulating Matting
MIL-C-14505 Revision D:1983 CLOTH, NYLON, POLYCHLOROPRENE-COATED (FOR PNEUMATIC FLOATING EQUIPMENT)
ASTM D 2765 : 2016 : REDLINE Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
ASTM D 178 : 2001 : EDT 2 Standard Specification for Rubber Insulating Matting
ISO/TS 16096:2014 Reclaimed isobutene-isoprene (IIR) rubber Evaluation procedure
SAE AMS 3348 : 2014 SILICONE (VMQ) RUBBER 1150 PSI (7.93 MPA) TENSILE STRENGTH, HIGH RESILIENCY 25 - 35
SAE AMS 3384 : 2013 RUBBER, FLUOROCARBON ELASTOMER (FKM), 70 TO 80 HARDNESS, LOW TEMPERATURE SEALING TG -22 DEGREES F (-30 DEGREES C), FOR ELASTOMERIC SHAPES OR PARTS IN GAS TURBINE ENGINE OIL, FUEL AND HYDRAULIC SYSTEMS
SAE AMS 3229 : 2013 ACRYLONITRILE BUTADIENE (NBR) RUBBER, HOT OIL RESISTANT, LOW SWELL, 75-85
SAE AMS 3218D : 2017 ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET 85 TO 95
ASTM D 6370 : 1999 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
AWWA C302 : 2016 REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE
ASTM D 6370 : 1999 : R2014 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
SAE AMS 3356 : 2014 SILICONE (VMQ) RUBBER, LUBRICATING OIL AND COMPRESSION SET RESISTANT, ELECTRICAL GRADE, 55 - 65
ASTM D 1278 : 1991 : REV A : R2011 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
ASTM D 6909 : 2010 : R2016 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
SAE AMS R 83283 : 2014 RUBBER SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE
ASTM D 3677 : 2010 : R2015 Standard Test Methods for Rubber—Identification by Infrared Spectrophotometry
ASTM D 4289 : 2014-02 TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS
ASTM D 6909 : 2010 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
ASTM D 7106 : 2005 : R2010 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
ASTM E 1420 : 1991 Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996)
ASTM D 5644 : 2001 : R2008 : EDT 1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM E 524 : 2008 : R2015 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
ASTM D 8115 : 2017 Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
ASTM E 1844 : 2008 : R2015 Standard Specification for A Size 10 × 4–5 Smooth-Tread Friction Test Tire
ASTM D 3677 : 2010 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM D 5774 : 1995 : R2009 Standard Test Methods for Rubber-Chemical Analysis of Extractables
ASTM D 5774 : 1995 : R2004 : EDT 2 Standard Test Methods for Rubber-Chemical Analysis of Extractables
ASTM D 5644 : 2001 : R2008 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D 1278 : 1991 : REV A : R2002 : EDT 1 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
ASTM D 6047 : 2017 : REDLINE Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers

ASTM E 200 : 2016 : REDLINE Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM D 1416 : 1989 Test Methods for Rubber from Synthetic Sources--Chemical Analysis (Withdrawn 1996)
ASTM E 11 : 2017 : REDLINE Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM D 4483 : 2014-02 PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES
ASTM E 442 : 1991 Test Method for Chlorine, Bromine, or Iodine in Organic Compounds by Oxygen Flask Combustion (Withdrawn 1997)
ASTM D 982 : 2016 : REDLINE Standard Test Method for Organic Nitrogen in Paper and Paperboard
ASTM D 1418 : 2017 : REDLINE Standard Practice for Rubber and Rubber Latices—Nomenclature

View more information
£90.16
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.