• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 3182 : 2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
Available format(s)

Hardcopy , PDF

Superseded date

13-08-2021

Language(s)

English

Published date

26-01-2016

This practice provides a listing of reference compounding materials required to prepare the rubber test compounds listed in succeeding methods and contains procedures for weighing

1.1This practice provides a listing of reference compounding materials required to prepare the rubber test compounds listed in succeeding methods and contains procedures for weighing. It also specifies the mixing equipment, general mixing procedures, vulcanization equipment and procedures.

1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific warning statement, see 5.5.

Committee
D 11
DocumentType
Standard Practice
Pages
8
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM F 2870 : 2016 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM D 816 : 2006 : R2016 Standard Test Methods for Rubber Cements
ASTM D 6284 : 2017 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
ASTM D 2692/D2692M : 2015 Standard Test Method for Air Permeability of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns (Withdrawn 2024)
ASTM E 1844 : 2008 : R2015 Standard Specification for A Size 10 × 4–5 Smooth-Tread Friction Test Tire
ASTM C 864 : 2005 : R2019 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
ASTM D 1456 : 1986 : R2014 Standard Test Method for Rubber Property—Elongation at Specific Stress
ASTM D 3192 : 2009 : R2019 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
ASTM D 3848 : 2003 : R2018 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
ASTM D 750 : 2012 : R2017 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 573 : 2004 : R2015 Standard Test Method for Rubber—Deterioration in an Air Oven
ASTM F 1909 : 1998 : R2012 Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets
ASTM D 1417 : 2016 Standard Test Methods for Rubber Latices—Synthetic
ASTM D 4122 : 2017 : EDT 1 Standard Practice for Carbon Black—Evaluation of an Industry Reference Black
ASTM D 3346 : 2017 Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
ASTM D 3137 : 1981 : R2018 Standard Test Method for Rubber Property—Hydrolytic Stability
ASTM D 3958 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
ASTM D 2663 : 2014 : R2019 Standard Test Methods for Carbon Black—Dispersion in Rubber
ASTM D 1871 : 2004 : R2014 Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023)
ASTM D 572 : 2004 : R2015 Standard Test Method for Rubber—Deterioration by Heat and Oxygen
ASTM E 670 : 2009 : R2015 Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM D 1485 : 2007 : R2015 Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation
ASTM G 74 : 2013 Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
ASTM D 395 : 2018 Standard Test Methods for Rubber Property—Compression Set
ASTM D 4289 : 2013 : R2014 : EDT 1 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 413 : 1998 : R2017 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
ASTM D 4482 : 2011 : R2017 Standard Test Method for Rubber Property—Extension Cycling Fatigue
ASTM D 454 : 2004 : R2015 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM E 1551 : 2016 Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire
ASTM D 1056 : 2014 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
ASTM D 3186 : 2007 : R2016 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
ASTM D 813 : 2007 : R2014 Standard Test Method for Rubber Deterioration—Crack Growth
ASTM F 640 : 2012 Standard Test Methods for Determining Radiopacity for Medical Use
ASTM D 3157 : 2005 : R2015 Standard Test Method for Rubber from Natural Sources—Color
ASTM E 501 : 2008 : R2015 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
ASTM D 5099 : 2008 : R2017 Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM D 6147 : 1997 : R2014 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
ASTM D 1248 : 2016 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM D 3004 : 2008 : R2013 Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials
ASTM D 3903 : 2015 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
ASTM D 925 : 2014 Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM D 3185 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
ASTM D 3189 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)
ASTM C 1115 : 2017 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
ASTM D 991 : 1989 : R2014 Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D 3771 : 2015 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
ASTM D 3190 : 2006 : R2016 Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR)
ASTM D 3403 : 2007 : R2016 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
ASTM D 1149 : 2018 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 4811/D4811M : 2016 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
ASTM D 6746 : 2015 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
ASTM C 1083 : 2006 : R2015 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
ASTM D 3484 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
ASTM E 2203 : 2014 : R2018 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
ASTM D 3667 : 2016 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM D 3832 : 1979 : R2017 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
ASTM D 1646 : 2019 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 5963 : 2004 : R2019 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
ASTM E 501 : 2008 : R2020 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
ASTM D 471 : 2016 : REV A : R2021 Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 1148 : 2013 : R2018 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
ASTM D 865 : 2011 : R2018 Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D 5668 : 2019 Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter
ASTM D 2228 : 2004 : R2019 Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
ASTM F 2870 : 2019 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM F 2493 : 2020 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
ASTM D 6746 : 2015 : R2020 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
ASTM D 3004 : 2008 : R2020 Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor, and Insulation Shielding Materials
ASTM D 2663 : 2014 : R2019 : EDT 1 Standard Test Methods for Carbon Black—Dispersion in Rubber
ASTM F 1909 : 1998 : R2020 Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets
ASTM D 572 : 2004 : R2019 Standard Test Method for Rubber—Deterioration by Heat and Oxygen
ASTM D 6147 : 1997 : R2020 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
ASTM D 3191 : 2010 : R2020 Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures
ASTM F 640 : 2020 Standard Test Methods for Determining Radiopacity for Medical Use
ASTM E 1136 : 2019 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
ASTM D 454 : 2004 : R2019 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM C 1083 : 2006 : R2020 : EDT 1 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
ASTM E 524 : 2008 : R2020 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
ASTM F 2466 : 2010 : R2018 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
ASTM D 624 : 2000 : R2020 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D 813 : 2007 : R2019 Standard Test Method for Rubber Deterioration—Crack Growth
ASTM E 1551 : 2016 : R2020 Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire
ASTM D 623 : 2007 : R2019 : EDT 1 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM D 573 : 2004 : R2019 Standard Test Method for Rubber—Deterioration in an Air Oven
ASTM D 750 : 2012 : R2021 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 1485 : 2007 : R2020 Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation
ASTM D 3157 : 2005 : R2020 Standard Test Method for Rubber from Natural Sources—Color
ASTM D 4482 : 2011 : R2021 Standard Test Method for Rubber Property—Extension Cycling Fatigue
ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM E 1844 : 2008 : R2020 Standard Specification for a Size 10 × 4–5 Smooth-Tread Friction Test Tire
ASTM E 670 : 2009 : R2020 Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM D 2632 : 2015 : R2019 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM F 2872 : 2019 Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
ASTM D 8363 : 2020 Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
ASTM D 2287 : 2019 Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM D 1056 : 2020 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
ASTM D 3183 : 2010 : R2019 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 1460 : 1986 : R2020 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM D 3184 : 2011 : R2018 Standard Practice for Rubber—Evaluation of NR (Natural Rubber)
ASTM D 2230 : 2017 : EDT 1 Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds
ASTM D 4289 : 2019 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 925 : 2014 : R2019 Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM D 991 : 1989 : R2020 Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D 1456 : 1986 : R2020 Standard Test Method for Rubber Property—Elongation at Specific Stress
ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 7121 : 2005 : R2018 Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
ASTM D 3188 : 2006 : R2017 Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber)
ASTM E 524 : 2008 : R2015 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
ASTM D 2228 : 2004 : R2015 Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
ASTM D 3568 : 2003 : R2018 Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
ASTM D 2632 : 2015 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM F 2871 : 2016 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
ASTM D 5668 : 2009 : R2014 Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter
ASTM F 2493 : 2018 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
ASTM D 2287 : 2012 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM D 1917 : 2003 : R2017 Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)
ASTM D 6338 : 2017 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
ASTM D 3183 : 2010 : R2015 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 1460 : 1986 : R2014 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM E 1136 : 2017 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
ASTM F 2872 : 2016 Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
ASTM D 1330 : 2004 : R2015 : EDT 1 Standard Specification for Rubber Sheet Gaskets
ASTM D 5963 : 2004 : R2015 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
ASTM D 1646 : 2019 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3191 : 2010 : R2014 Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures
ASTM D 623 : 2007 : R2014 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM D 2230 : 2017 Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds
ASTM D 3187 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D 624 : 2000 : R2012 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D 3194 : 2017 Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI)
ASTM F 2468 : 2005 : R2019 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

ASTM D 1646 : 2000 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2161 : 2005 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2161 : 2019 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2084 : 1995 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D 1646 : 2004 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2084 : 2019 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 2501 : 1991 : R2000 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 2161 : 2010 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 1646 : 1981 Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer)
ASTM D 5289 : 2006 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D 6204 : 2004 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2161 : 1982 Standard Method for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2084 : 2006 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D 5289 : 2007 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D 5289 : 2017 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 2161 : 2010 : EDT 1 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 5289 : 2007 : REV A Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D 4678 : 2004 Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 4678 : 1994 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 1646 : 2019 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1646 : 2019 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 4678 : 2011 Standard Practice for Rubber<char: emdash>Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 5289 : 2019 : REV A Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 2226 : 1993 : R2002 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
ASTM D 5289 : 2019 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 2084 : 2011 : R2016 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 2226 : 1993 : R2007 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
ASTM D 2226 : 1993 : R2018 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
ASTM D 1646 : 2003 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2501 : 2011 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 1646 : 2015 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2226 : 1993 : R2012 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
ASTM D 4678 : 2004 : R2009 : EDT 1 Standard Practice for Rubber<char: emdash>Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 6204 : 2019 : REV A Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2084 : 2007 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D 1646 : 2003 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2501 : 1991 : R2005 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 2084 : 2001 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D 5289 : 1995 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 5289 : 2012 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 6204 : 2019 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2501 : 2014 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 4678 : 2015 : REV A Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 1646 : 2006 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2084 : 2019 : REV A Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 2226 : 1993 : R1998 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
ASTM D 6204 : 2001 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 1646 : 2007 : R2012 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 6204 : 2005 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2161 : 2020 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2161 : 1993 : R1999 : EDT 2 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 4678 : 2015 : REV A : R2019 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 6204 : 2007 Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 1646 : 2007 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1646 : 2017 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2084 : 2011 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 4678 : 2004 : R2009 Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 2161 : 2010 : R2016 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2161 : 1966 Standard Method Of Test For Conversion Of Kinematic Viscosity To Saybolt Universal Viscosity Or To Saybolt Furol Viscosity
ASTM D 6204 : 2012 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 1646 : 1992 Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2161 : 2004 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2501 : 2014 : R2019 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 2161 : 2017 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 6204 : 1999 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2161 : 2005 : EDT 1 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2084 : 2017 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 4678 : 2015 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 6204 : 2015 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.